NF3/NF4 & BH-5/BH-6/UTT - Highest stable clocks - REPORT IN !!!

[shaolin95]

See signature for details. This is not the highest I can take the memory at 2-2-2-x. Ive been able to hit 267FSB but since my CPU maxes out at around 2770 with 1.65v, my best choice is to run around FSB252x11.



At least with my score there will now be 3 posts for the 754 division

[5-Clicks]

OCZ VX PC4000 2x512mb @ 265 2-2-2-5 3.5v Everything else set to auto in the BIOS. I'm sure these sticks are much capable of more, but I don't have the results ATM



EDIT: 27minutes i believe. with the CPU at 3ghz and RAM 250 2-2-2-5, i get 25.5 minutes.

[omga14]

i'm using the NF4X Infinity so i don't have the choice to use a 183 divider and my max v is 3.2v's. so here's my max 32M with BH-5(forgot to change tras).

[KenLau]

281 Mhz with a multiplier X10 ,Vdimm 3.7V
SPi 32M calculation time = 25m25.250s
and here's the ss

[tertip_ak47]

Hi
that's the Score from my sticks.
Opteron146 @ 2900Mhz Multi *10 , Twinmos pc3200 AA4T 2.2.2.5 264Mhz 3.6vD

PEaCE

[Fosco]

Fosco
Thanks !
Waiting for your 28xmhz on the SLi expert ,I wish you can do that .
Keep pushing it,mate

Done ! Needed a RDX200

Cpu-Z validation : http://valid.x86-secret.com/show_oc?id=57935

[Onepagebook]

TeamGroup Xtreem BH-5
277x12, 2-2-2-5, DFI Ultra-D BIOS 703-2 Merlin Moded version
Info picture below:

[szukalski]

Here's some 4x512Mb action.
TMSP PC3500 BH-UTT @ 250MHz @ 2-2-2-5-7-12-2-2-1-2 @ 3.3v
The 148 won't accept lower preamble/async values running a divider at 300HTT unfortunately.
http://img478.imageshack.us/img478/8...22253pt3v2.jpg

[bachus_anonym]

*** Thread Updated ***

Congrats to Kevin (Onepagebook) for sweet new record of 277MHz @ 5-2-2-2.0-1T

Sorry for a bit of slack on an update :p It will happen again But don't stop submitting new entries! Thanks a lot for participating, guys

[szukalski]

Here's some 4x512Mb action.
TMSP PC3500 BH-UTT @ 250MHz @ 2-2-2-5-7-12-2-2-1-2 @ 3.3v
The 148 won't accept lower preamble/async values running a divider at 300HTT unfortunately.
http://img478.imageshack.us/img478/8...22253pt3v2.jpg

Upped the MHz in a search for a better daily setup, same deal with the preamble/async though
TMSP PC3500 BH-UTT @ 258.5MHz @ 2-2-2-5-7-12-2-2-1-2 @ 3.5v
http://img401.imageshack.us/img401/8...mhz22256ab.jpg

[huangteng]

2.92 GHz @ 1.425V + 4.8%
Thermalright XP-90C with Panaflo 92mm M1A

SuperPI 32M stable... :hat1:

[shaolin95]

Finally broke the 2800MHZ barrier thanks to the winter and moving from Texas to Utah!
Got a new best score! I am keeping my 11 multi so my CPU is holding me back for higher FSB but I am of course trying to get the highest CPU first and highest FSB second. Here is my biggest achievement yet for the 754 NC 3400 on air.

My best time has been 29min 11segs when I shut down outpost and nod32.

[Learn]

Mushkin + Corsair Pc3500
A64 Winchester

[Dani]

DFI nF4 SLI-D, Opt 146, AIR cooled CPU&MEM -1'C

CORSAIR CMX256A-3500 C2
XMS3502v1.1
024704

Stick1:
Winbond
2452D
W942508BH-5

and same stepping on other side

Stick2:
Winbond
2452D
W942508BH-5

and the other side

Winbond
2462D
W942508BH-5

[HiJon89]

Opteron 148 @ 264x11 = 2904Mhz
2x512MB OCZ PC3500 Platinum Ltd. Edition BH-5 @ 264Mhz 3.31V
Rest of info in my sig.

These bad boys definitely have some more in them, but this is about the max of my CPU with 11 multi. I'll drop it down to 10 tomorrow and see if I can't set the record

[KenLau]

2x256mb Corsair PC3200LL V1.1 (303we)
283mhz DDR566 6-2-2-2-1T vdimm 3.7V
DFI Lanparty NF4 Ultra-D (Bios 623-2)

23 loop

[Fosco]

nice KenLau

No i`m in 3. , have to do something about that

[KenLau]

nice KenLau

No i`m in 3. , have to do something about that

Fosco , thanks !!
For the last mhz,it spent me a lot of times on it ,I think I need a 600W psu or a 5V rail mod and see if any help with it. As I Know Norway is very cold now ,and hoping the Mr.cool will give you a help . Keep on pushing it,mate !!

[HiJon89]

Opteron 148 @ 264x11 = 2904Mhz
2x512MB OCZ PC3500 Platinum Ltd. Edition BH-5 @ 264Mhz 3.31V
Rest of info in my sig.

These bad boys definitely have some more in them, but this is about the max of my CPU with 11 multi. I'll drop it down to 10 tomorrow and see if I can't set the record

Small update:

Opteron 148 at 2.7Ghz (10x270)
2x512MB OCZ PC3500 Platinum Ltd. Edition BH-5 @ 270Mhz 3.4V
Rest of info in my sig.

EDIT: Forgot to mention, Bank Interleave still enabled.

[Rolf]

Small Test with new DFI nF4 Ultra-D: 260Mhz 1,5-2-2-0 (all Timings tweaked) @ 3,28VDimm couple of hours Prime-Blend stable... BUFFALO Value with new BH5 - that's cheeeeeeap! Sticks runnin' passive, only PWM @ 80mm Fan. PSU is an AcBel 400W



Timings:

[kaze]

My results are to bad to show, I thought I would ask you guys with DFI Lanparty UT NF3 to help me a little bit (guys who dont have that mobo can help me if they can to ) I have 2gb of BH5 , 4x512, 3xOldschool 1x Speed Premium, 2 of the oldschool are almost identical, ~3errors in test5 DDR500 3.18v (single channel) but if I try to run them in dual channel mode they wont even do 240 with 3.2-3.6v. The CPU is a SD 3700+ running at 273x11 (for now with a 166 divider) I know that both of them are good for at least 260+ so I think ive missed something, im curious about one setting in bios (but I dont know the name of it) the values are "not reduction" "15% reduction" "30% reduction" "50% reduction" or something like that, dont know wich one of them to use since I dont know what it means. running BIOS 711 btw.

[gsan]

here is mine 2x512MB Gskill GH UnTesTed BH5, doing 255 @ 2225 with divider at 3.68v.



by the way, uOpt, although your ram speed & cpu speed is much higher than mine, but my result seem better than you. wonder why?

[sierra_bound]

2X512 Corsair PC3200C2 Rev1.1 (BH-6) @ 3.72v
DFI SLI-DR Expert



http://valid.x86-secret.com/show_oc?id=66085

[HiJon89]

Got 272Mhz stable. Here's a shot of 1095 passes of Test #5 with 0 errors at 272Mhz 3.47V:
http://img.photobucket.com/albums/v6...272Memtest.jpg
and here's a 32M at 272Mhz 3.52V:
http://img.photobucket.com/albums/v6...H-5/27232M.jpg
Bank Interleave still enabled.

[mursaat]

Wow how old are your dimms? Mine have 3 months (heh) and they need 3.5v to be stable at 250 2-2-2-5.