strictly air, front intake 120mm, rear 120, psu 120, and the zalman 9500 pushing some air at the rear. When benching I open the window, and yea it gets cold..
strictly air, front intake 120mm, rear 120, psu 120, and the zalman 9500 pushing some air at the rear. When benching I open the window, and yea it gets cold..
DFI LP UT NF4 Ultra-D 623-3
Opty 170 @ 2.8 z9500
G.Skill 1GBFX @ DDR560
eVga 6800GS @ 485/1.15
2xRaptor74 R0 sata
OCZ 700w GXSSLI
Antec SuperLanboy Case
It's a Zalman 9500 cooler on his CPU, and although it has more copper then fan, it still has a fan and is thus not cooled passivelyOriginally Posted by fAlCoNNiAn
(you can see a minor blue glow from the fan on one of the pictures)
got it, thanks.Originally Posted by ZMarre
Switching over to a windowed side panel with no vents, but here it is as of now. Only a week old. One 120mm exhaust fan, one 120mm intake fan (under the CD drive), one 80mm intake fan (bottom near the hard drives), and one 80mm "pusher" fan, under the video card. Sorry for the poor photo quality, took them with my camera phone in pretty bad lighting.
![]()
Some killer air action![]()
Phenom II 940 BE / ASUS M4A79 / HD5770 Crossfire
3770mhz CPU 2600mhz NB | DDR1040 5-5-5-15 | 900/1250
Very thick fansOriginally Posted by afireinside
![]()
That's an antec superlanboy right? I luv that case![]()
Here's mine,
New hdd suspension
I should take new pictures, wires beneath the hdd make it look too messy..I fixed that and it's even neater now![]()
Messy wires, but still tidy...I like it.
My own sleeving is a disaster. =/
Psu was pre sleaved thank god lolOriginally Posted by a0chicken
![]()
I want to get small sleaving for my fan wires, I hate those rainbow colors in my caseI'll get new pics soon I changed some things way neater now
![]()
Thanks
Because everyone is usually overclocking and it voids the warranty. So if they were to return their chips, the serial # can't be tracked..Originally Posted by Dr_at_Home
DFI LP UT NF4 Ultra-D 623-3
Opty 170 @ 2.8 z9500
G.Skill 1GBFX @ DDR560
eVga 6800GS @ 485/1.15
2xRaptor74 R0 sata
OCZ 700w GXSSLI
Antec SuperLanboy Case
Oh, thanks for clearing that up.![]()
Yeah it's a super lanboyNice case but it's tiny!
38mm thick 120mm delta fans. 129CFM 48db.
Phenom II 940 BE / ASUS M4A79 / HD5770 Crossfire
3770mhz CPU 2600mhz NB | DDR1040 5-5-5-15 | 900/1250
Last edited by tytlyf; 01-02-2006 at 11:01 AM.
DFI LP UT NF4 Ultra-D 623-3
Opty 170 @ 2.8 z9500
G.Skill 1GBFX @ DDR560
eVga 6800GS @ 485/1.15
2xRaptor74 R0 sata
OCZ 700w GXSSLI
Antec SuperLanboy Case
Very clean, but how do you survive with only a 74G raptor? :p
Opteron 170 @ 3.0Ghz on air, Opteron 144 @ 3.1Ghz on air
First pic is zoomed in on the northbridge cooler. You can see the bottom of the CPU cooler in the first shot. It's the same PC.
Guys I really like the new Zalman 9500. Is it worth a try?
Alex
Last edited by AgonxOC; 01-04-2006 at 06:13 PM.
I can see a Thermaltake NB cooler and in the background the Zalman 9500 in first pic; in second pic I see a Zalman or stock NB cooler and a Zalman 7000CU. So don't think it's same PCOriginally Posted by a0chicken
![]()
But why would he take a close up of one PC and then two more of another? o_O
I dont use much space, no music etc... This was the starting point, I figure if I run out of room I can run another in raid and have awesome performance..Originally Posted by TMM
![]()
DFI LP UT NF4 Ultra-D 623-3
Opty 170 @ 2.8 z9500
G.Skill 1GBFX @ DDR560
eVga 6800GS @ 485/1.15
2xRaptor74 R0 sata
OCZ 700w GXSSLI
Antec SuperLanboy Case
The Finger pwner:
It's an Arctic Freezer 4 on a 3.2E with the infamous Vantec Tornado
It vibrates the entire desk when its fully on, and I think it might be slowly pulling itself towards me..... I think it's hungry for something to lacerate
haha! gotta love the tornados.
DFI UT X58-T3eH8 (being replaced with Giga UD5)
Core i7 920 D0 mostly stable @ 4Ghz
TRUE 120
6GB OCZ Platinum 7-7-7 (still in testing
XFX 4890 1GB @ 1050/1190
Corsair HX850W
CM Cosmos S
Still testing...
Bookmarks