I'm getting this error
I'm getting this error
|| Core 2 Quad QX6850 ES @ 3.5Ghz 1.35V || Thermalright Ultra 120 || Asus P5K3 Deluxe || Gskill F3-12800CL7D-2GBHZ
|| XFX 8800GTX || Dell 2005FPW 20" || Ultra X-Pro 750W LE || 3 x WD 320GB SD + 1 x Hitachi 500GB
You need to install Microsoft's .NET prior to installing Watch Dog.
^ yepper. I believe this is the correct d/l link.
http://www.microsoft.com/downloads/d...displaylang=en
DFI UT X58-T3eH8 (being replaced with Giga UD5)
Core i7 920 D0 mostly stable @ 4Ghz
TRUE 120
6GB OCZ Platinum 7-7-7 (still in testing
XFX 4890 1GB @ 1050/1190
Corsair HX850W
CM Cosmos S
Still testing...
Any progress with the non-.NET version? I've got a bunch of 3.0 HT machines here dying to crunch in stealth mode.
DDTUNG
XtremeSystems - we overclock and crunch you to the ground
I left the optimized files on three 3GHz P4 HTs. Ban me.
Sorry, I haven't had any time to work on it. Been too busy with work and doing things around the house right now. I'll try to get to it sometime soon though.Originally Posted by DDTUNG
Any progress with the non-.NET version? I've got a bunch of 3.0 HT machines here dying to crunch in stealth mode.
DDTUNG
![Send a message via AIM to [XC] DragonOrta](images/misc/im_aim.gif)
![Send a message via MSN to [XC] DragonOrta](images/misc/im_msn.gif)
![Send a message via Yahoo to [XC] DragonOrta](images/misc/im_yahoo.gif)
where can I access the .ini file?
A wolf in wolves clothing.
Should be in :
C:\Program Files\D2OL Xtreme Watch Dog\
There, you should find the settings.ini file.
Rig #1
Gigabyte P67A-UD4 trying to figure out this POS board
2600k @ ?????
2x2Gb GSkill RipJaws-X 1333 (7-7-7-21)
ATI 5850
Coba Nitrox 750W
Watercooled with HK 3.0 CU, Watercool GPU-X³ 5870 Nickel, PA120.3, Laing Ultra with XSPC top
Rig #2
DFI UT P35-T2R (0317 bios)
E8200 @ 4000 (1.216V) / 4100 (1.248V) / 4200 (1.296V) / 4300 (1.344V)
2x2Gb Chaintech Apogee GT PC2-8500
Powercolor 4870
Corsair 520HX
Watercooled with HK 3.0 CU, EK-FC4870, Feser tripple, Laing Ultra pump
I've got Supermicro boards that lasted longer than one of my marriages!
Thank you, Juliper
Last edited by [XC] DragonOrta; 08-05-2005 at 07:14 AM. Reason: still had caps lock from editing ini. :rolleyes:
A wolf in wolves clothing.
You're welcome.
Rig #1
Gigabyte P67A-UD4 trying to figure out this POS board
2600k @ ?????
2x2Gb GSkill RipJaws-X 1333 (7-7-7-21)
ATI 5850
Coba Nitrox 750W
Watercooled with HK 3.0 CU, Watercool GPU-X³ 5870 Nickel, PA120.3, Laing Ultra with XSPC top
Rig #2
DFI UT P35-T2R (0317 bios)
E8200 @ 4000 (1.216V) / 4100 (1.248V) / 4200 (1.296V) / 4300 (1.344V)
2x2Gb Chaintech Apogee GT PC2-8500
Powercolor 4870
Corsair 520HX
Watercooled with HK 3.0 CU, EK-FC4870, Feser tripple, Laing Ultra pump
I've got Supermicro boards that lasted longer than one of my marriages!
how do i uninstall d2ol daddy?
Is it installed as a service? (Like with Rodzilla's installer)how do i uninstall d2ol daddy?
yea it was installed with rod's installer.
There is an uninstall batch file in the XS_D2OL folder, but im affraid taht will unistall everything?
Run these two lines to remove it:
net stop DDaddy
instsrv DDaddy remove
ty
Bump. Any progress with non-.NET version? Maybe make a thread in the coder's corner if u need help (I'm no good with it).
Bump to you dear sir
Just installed in on my mom's comp. Made a pretty big difference compared to D2OL daddy... (sempron 2600+ with 1 ghz , and just for some office stuff)
When can we expect a non .net version of this fine software???
nag nag nag!!
Unfortunately no time soon, it’s been really crazy at work so I don’t have the time right now. Hopefully in the new year it will settle down a bit and I’ll have some free time again.
Just install .NET and be done with it!!!
I've found if you are running d2ol daddy as a service it doesn't even work.Just installed in on my mom's comp. Made a pretty big difference compared to D2OL daddy...
so what's better about this than d2ol daddy? just wondering?
System:
2600K / 8GB Corsair Vengeance PC15000
Asus Sabertooth P67 / MSI Twin Frozr II 6950 Crossfire
corsair 1000hx / Corsair 800D obsidian
Crucial M4 128GB SSD / Windows 7 Pro
Cooling:
Koolance 360 rev 1.1 CPU block / MCR320 QP rad
OCZ hydropulse 800 pump w/ EK-DCP 4.0 res
Primochill LRT Black tubing 3/8" ID x 5/8" OD
Use this dat file to remove the D2OLDaddy service created with my any of my installers.
It runs better as a service... some ppl have had problems getting D2OL daddy to work right on there rigs when it's running as a service.
the XS WD is totally out of the way.
Ya it's built as a native service instead of just trying to get a standard exe to run as a service with srvany.exe and instsrv.exe. It also has some advanced options as well like the ability to restart the d2ol services if they stop.
Automatically too right?
PLUG!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!
by chance, will this work with the standard d2ol client? I dont really want to install everything and ect, could I just install rod's client, and move the node file to that directory and use this, or are you planning on making it compatible with sengents version?
杰森
I can picture in my mind a world without hate, a world without violence.
And I can picture us attacking that world, because they'd never expect it.
Yes it will work with the standard client as well.
Posting Permissions
Bookmarks