Sorry but that type of information is confidential and cannot be shared.
Originally Posted by AACDIRECT
Sorry but that type of information is confidential and cannot be shared.
It does have a big red ATI logo stamped on it though...Sorry but that type of information is confidential and cannot be shared.
No matter what, I am rather excited about getting my mitts on one of these when they become available.
AMD 3800 X2
Asus A8N-SLI Deluxe
2x512 OCZ PC 3500 Performance Series
2xEVGA 7900 GTO
520w OCZ Powerstream PSU
Antec Solution Case
More time than money
Macci with a Zalman = highest air overclocks ever seen...for sure.
awesome.
That should bring some solid Air-cooled #'s, given the card can support it w/o problems.
Why stop at 12164 when you can go higher?And there's no doubt in my mind that this is only scratching the surface.
macci said and in BJ3D show that 12164 is the score reached by them, but in other site (noticias3D) show this result 12278
Sorry but that type of information is confidential and cannot be shared.
but how can we oc our X1800 with a confidential tool. or the soft voltmod is confidential? cause in ati site said this.
Dynamic Voltage Control
is this a soft voltmod?
when it will be free for us?
Last edited by Marioace; 10-06-2005 at 07:33 AM.
Under Zero
darn look but not touchSorry but that type of information is confidential and cannot be shared.
---
Someone will figure it out...
No, it won't fit. I already tried doing that on my 6800, but it was not possible to fit the card in the slot, because the cooler was too wide.Do you think it will fit??
(Zalman CPU cooler)
-k0nsl
When you were born, you were crying and everyone around you was smiling. Live your life so that when you die, you're smiling and everyone around you is crying.
@GraySkull
Is there going to be and AGP version of any of this card´s?
Sempron 2200+@ 200x9
MB A7N8X-X
512ram( 1x 256 elixir333 + 1x 256 Kingston400)
Segate 20gb
Seagate 120 Gb Barracuda
Radeon 9550 256mb Gecube
Voodoo 3 Pci@core 190 /mem @ 190
^i believe thats a no
Wow....it was 990MHz on the mem--someone made a boo-boo in the multiplication (all early reports were at 1880MHz rather than the proper 1980MHz!).
Macci....when are we gonna see some 01 action on a better FX?
http://www.theinquirer.net/?article=26543
Take the Inq at your own risk...but they are usually pretty up and up.
AMD 3800 X2
Asus A8N-SLI Deluxe
2x512 OCZ PC 3500 Performance Series
2xEVGA 7900 GTO
520w OCZ Powerstream PSU
Antec Solution Case
More time than money
Welcome back Macci.
Shiat nice piccies, tight fit eh
Btw. Check PM
Don't worry the overclocking community has W1zzard. He will figure it out.
----------TOWER OF POWER----------
Dell 2405 FPW 24' LCD
Amd 64 +3200 @ 2.929ghz @ 1.5vcore
Msi Neo2 Plat Does ~385htt
Ocz Pc4800 Plats @ 292 2.5-3-3-7 @ 2.85v
Ocz Powerstream 520 watt
Ati 9800pro @ 470/360
2 X WD 36gb Raptors Raid 0
WD 16Mb Sata2 250gb
All on air, loud and very bright.
Paper launch? Come on guys...I just dont understand the situation of things at ATi HQ. Why have we heard such contradictory things lately? Where are the XLs they should be available now yet they arent till *maybe* next week? In addition *nothing* has been said about the X1300s
What happened to it being "volume" shipping? What in the world is going on?
is there any info about holes for water cooling
Core Quad Q9300
ASUS P5Q-PRO
4GB RAM
Ati Radeon 4890
Enermax Liberty 620w
The card has the same mounting pattern as the NV 6800/7800 series. A standard GPU block should fit. I am in the process of testing this. I want to OC on stock HSF first to see how much of an advantage water gives this card.
Still working on getting a program to OC with. (Both driver sets I have for the card do not have overdrive. I also assume that once I get a program it will have temp monitoring as it is a safe bet the card supports it.) Getting OC software seems to be the big issue at the moment.
is maybe same as x800? or only 6800/7800
Core Quad Q9300
ASUS P5Q-PRO
4GB RAM
Ati Radeon 4890
Enermax Liberty 620w
Asking Grayskull about decisions made by the ATI management team over release dates, marketing efforts or card distribution is pointless. If he was the president of ATI he wouldn't be hanging around at xtremesystems.
Why not ask him technical questions about the cards? He's a technical resource. I'm sure he can tell us all about the ins and outs.
"Foldin, Foldin, Foldin...keep those benchers foldin..." (Lyrics by Angra, Music is Rawhide)
BOYCOTT MIR's
Not x800 which was spaced different and had only two holes. The x1800 has four holes and they are spaced the same as the 6800/7800. I attached a picture.
what about holes in the midle, they sems same for me
Core Quad Q9300
ASUS P5Q-PRO
4GB RAM
Ati Radeon 4890
Enermax Liberty 620w
@AACDIRECT :
BIOS modding
looks like a total of 8 holes, hopefully that will allow better gpu mounting for LN2 and Dry ice tubes.
Microsoft's homepage can be found at: thesource-dot-ofallevil-dot-com - interesting, no?
Think of something witty and imagine it here.
Sure it will fitNo, it won't fit. I already tried doing that on my 6800, but it was not possible to fit the card in the slot, because the cooler was too wide.
But it did take some moddin'
Some aircooled results from yesterday evening. Normal room temp and wasn't pushing it too hard yet (no artifacts etc).
GPU 0.15V over default, MEM at default volts.
Mark05:
Mark2001 (notice the low FSB):
some pics of the aircooled system:
Those are big air numbers, 11k in 05 on air? That's pretty damn good for one card.
Microsoft's homepage can be found at: thesource-dot-ofallevil-dot-com - interesting, no?
Think of something witty and imagine it here.
Posting Permissions
Reply With Quote
Bookmarks