Agp+ddr1+conroe→asus P5pe-vm

very costdown mobo, spent $58USD in taiwan

P5PE-VM

INTEL chipset，NB→865G，SB→ ICH5
Supported PENTIM D/PENTIUM 4/CELERON /C2D
supported HT及EIST
FSB/1066/800/533

Supported DDR1 266~400mhz dualchannel , max 2GB

865G , video chip→INTEL EXTREME GRAPHICS 2

PCI*3，AGP 8X*1

Sb→ICH5 ，two IDE ATA100/66，two SATA1

onboard sound chip：ADI HD

MARVELL GIGABIT network

max usb*4



http://img.oc.com.tw/8k0285/200681242141605087047.jpeg


http://img.oc.com.tw/8k0285/2006812425111384518538.jpeg


http://img.oc.com.tw/8k0285/2006812435829608540581.jpeg


http://img.oc.com.tw/8k0285/200681245621999344804.jpeg


http://img.oc.com.tw/8k0285/200681246616969359552.jpeg

yeah, in stock, my country.

Conroe +BH5?:D

Quote:

---

Originally Posted by over@locker886

yeah, in stock, my country.

Conroe +BH5?:D

---

and.......ths one:D

http://img.oc.com.tw/8k0285/200689745733446714108.jpeg

Quote:

---

Originally Posted by hicookie

and.......ths one:D

---

And...:D

So..Will you test this mobo? :) We will know surely conroe ready.:rolleyes:

OC?????


Alex

Dude, you MUST TEST CONROE w/9800 PRO/XT :woot:

conroe + Ti4200 would be fun.

revive a real classic.
that card had a good 2 year run, even after it was discontinued.

Screwwwww Ti4200, 9800 > all :p:

Conroe on 3-phase power??? I have a lot of doubt about Conroe on this board. And, of course, the box does not mention Conroe. Best of luck but you should consider a backup CPU when Conroe will not boot. :confused:

Quote:

---

Originally Posted by Kango

Conroe on 3-phase power??? I have a lot of doubt about Conroe on this board. And, of course, the box does not mention Conroe. Best of luck but you should consider a backup CPU when Conroe will not boot. :confused:

---

when the mb supports prescotts and pentium D then a conroe will be a piece of cake ;)
and yea, box doesn't mention but asus site does.
look here: http://www.asus.com/news_show.aspx?id=3801

btw, it's very possible that this mobo doesn't support OC at all.
no voltage options (or very narrow, like vddr to 2.6v and no vcore chg)..
most asus matx boards don't allow to change even fsb from bios :f

Quote:

---

Originally Posted by caater

when the mb supports prescotts and pentium D then a conroe will be a piece of cake ;)
and yea, box doesn't mention but asus site does.
look here: http://www.asus.com/news_show.aspx?id=3801

---

I didn't say it would not support Conroe, I said I had my doubts. Big difference. Having another Core 2 Duo workhorse in the stable will be a benefit, for sure. Please let us know how it works out. OK?

too bad.

put on x6800 no boot

change 631 no boot,e6700 either

i don't know what happen?

too , bad , checked , i bought a dead mobo

Quote:

---

Originally Posted by hicookie

too , bad , checked , i bought a dead mobo

---

bad news, sorry:(

That blows. Are you gettting another one....?

Alex

Quote:

---

Originally Posted by AgonxOC

That blows. Are you gettting another one....?

Alex

---

not yet , maybe tomorrow:)

asus is being brave. 266fsb "stock" support on an i865 chipset

Hmmm i download manual of this mobo, and in bios is only option for timing's. No FSB/vcore/vdimm setting's :(

Very nice, i865 still has juice :D

very tiny size, red line is standar atx

http://img.oc.com.tw/8k0285/20068132...936924689.jpeg

Now I wanna see a 9800 Pro in that board. :D

Rev 1 supports conroe ? Did you try a celeron

conroe+ geforce256 DDR :) :) :). id LOVE to do that :)

Benchesss!!:woot: :toast:

Quote:

---

Originally Posted by geforce man

conroe+ geforce256 DDR :) :) :). id LOVE to do that :)

---

well, a friend of mine will buy a conroe and I might want to try my DDR, just for fun.

Project tittle: "Biggest VGA-Bottleneck, ever!"

Quote:

---

Originally Posted by cirthix

asus is being brave. 266fsb "stock" support on an i865 chipset

---

Certainly brave, but may not be that impossible. As the P4P800's /SEs have scaled 290MHz with stock, or little voltage bump

@hicookie: any news about this board?! Are there oc settings in the BIOS?

mibo No. Only timming settings in bios. We can OC it onlt by ClockGen (ICS 950405)/i865 Tweaker. Russian overclocker got only 300+ fsb and anotherone only 283 fsb.
P.S. This mobo doesn`t support x6800, only e6x00

Quote:

---

Originally Posted by Kango

Conroe on 3-phase power??? I have a lot of doubt about Conroe on this board. And, of course, the box does not mention Conroe. Best of luck but you should consider a backup CPU when Conroe will not boot. :confused:

---

the GA-965P-S3 also is only 3-phase... the foxconn P9657AA-8EKRS2H has also 3 phase and can hit about 413 MHz FSB.

If it doesn't work, look for:
ASrock ConRoe-865PE or 775i65G.

Quote:

---

Originally Posted by Kunaak

conroe + Ti4200 would be fun.

revive a real classic.
that card had a good 2 year run, even after it was discontinued.

---

i got my whole computer except my gpu.. set it up and hadda use my old fx5200 and well... 3dmark 06 i scored ~100 and i couldnt get over 50fps in css even with everything low...

Quote:

---

Originally Posted by Kango

Conroe on 3-phase power??? I have a lot of doubt about Conroe on this board. And, of course, the box does not mention Conroe. Best of luck but you should consider a backup CPU when Conroe will not boot. :confused:

---

WHY?!?!?!?!?!

DS3 in the first two benching links in my sig is a 3-phase power mobo and kicked arse no problems at all

this will be interesting lol..that is one tiny board tho

any updates?

support e4300?

id really like to see geForce 256 + kentsfield
now..that would be gfx limited on a whole new level ;)

Quote:

---

Originally Posted by Soakki

support e4300?

---

Yes, I've bought this motherboard last week + e4300 and working great :)

bump? :D

Quote:

---

Originally Posted by cirthix

asus is being brave. 266fsb "stock" support on an i865 chipset

---

P4P800-SE did "stock" ~300FSB (at least mine)... P4C800 also managed 280+ without problems...

ontopic - this is the kind of mobo that's made for mods ;)
a E4400 with BSEL mod and a clean vmod and a little Clockgen should easily make a nice cheap C2D 3GHz team ;)

Reaching 333MHZ FSB stable is pretty hard for the i865 chipset.

I've only managed to get 310MHz max out of it (just pencil mod on chipset though) on the Asrock Conroe865PE that I owned once (300FSB set in bios), though I hadn't tried fitting a better heatsink on the chipset and upping the chipset voltage. :D

BSEL mods didn't work on that Asrock board mind you although that didn't effect the overclocking one bit.

Well, since P5PE-VM doesn't have any overclocking settings on Bios, I'm doing BSEL mod 1066 and see how it handles it. Shouldn't be a problem, since the mobo supports 1066 C2D... just waiting until conductive paint dries... I'll post news when its working...or not working...

Oh yeah baby! Its working like a charm :D

Now this is pushing it, but maybe possible 1333?

Pitty is the 3:2 divider on the mem... nothing that clockgen cant manage :D

YAIKS! Something really weird happened!

I overclocked to 1333 fsb using clockgen in windows, working fine.
Rebooted the machine, and take a look at the bios now?!

I shutdown the rig and boot up again, and now its back to 1066. Does this mean that I can BSEL to 1333 on this motherboard? :banana: :banana: :banana:

Looks light it might, and even if it doesnt clockgen works fine ;)

I think I need one of these boards, my ASRock 775Dual-VSTA craps out at 305... 'though I havent done any mods to it yet.

You might not beeing able to get that, depends if you use SATA disks or not. Remember, there's no pci/agp lock, so you will be dependent on how stable your HDD are in overclock too :( I left yesterday my rig testing @ 1333 fsb and it didn't hold on for long... anyway, I am able to run totally stable @ 1200fsb with CPC ON and PAT ON on the memories, so I'm quite happy :)

lol nice thread. and good job asus for releasing updates on such old bioses! this is 865g too eh. real impressive.

865/875 were the best chipsets ever, still going strong after all these years...

we need a unlocked chip on these and some R9800 benching, if i had the unlocked chip i would already be on it with my BH-5 i have here. :)

From what I've heard the Asrock Conroe 865PE has bios overclocking options although quite limited... It would be nice to see if any of them can handle a higher multi on a x6800 ;) ...

It would make a great AGP benching rig!