Asus P5N32-E & Striker Extreme with GSKILL memory setup insturctions

Printable View

Show 100 post(s) from this thread on one page

02-02-2007, 04:58 PM
GSKILL TECH

Asus P5N32-E & Striker Extreme with GSKILL memory setup insturctions

Code:

DDR2 1066 / F2-8500 HZ Series FSB SPEED 1066 DDR2 SPEED 1066 VOLTAGE 2.4v TCL 4 TRCD 4 TRP 4 TRAS 5 CMS 1T / 2T 2T TRRD 2 TRC 5 TWR 3 TWTR 6 TREF 1 TRD 3 TRFC 27 ASY LAT 2 DDR2 1000 / F2-8000 ZX Series HZ Series FSB SPEED 1066 1066 DDR2 SPEED 1000 1000 VOLTAGE 2.3v 2.4v TCL 5 4 TRCD 5 4 TRP 5 4 TRAS 15 5 CMS 1T / 2T 2T 2T TRRD 2 2 TRC 5 5 TWR 3 3 TWTR 6 6 TREF 1 1 TRD 3 3 TRFC 27 27 ASY LAT 2 2 DDR2 800 / F2-6400 PQ Series MQ Series NQ Series PK Series HK Series HZ Series NR Series FSB SPEED 1066 1066 1066 1066 1066 1066 1066 DDR2 SPEED 800 800 800 800 800 800 800 VOLTAGE 1.9v 1.85v 1.85v 1.95v 2v 2v 1.9v TCL 5 6 5 4 4 4 5 TRCD 5 6 5 4 4 4 5 TRP 5 6 5 4 3 4 5 TRAS 15 18 15 12 5 12 15 CMS 1T / 2T 2T 2T 2T 2T 2T 2T 2T TRRD 3 3 3 2 2 1 3 TRC 15 20 20 3 3 2 20 TWR 6 6 6 5 5 2 5 TWTR 9 9 9 7 6 6 9 TREF 1 1 1 1 1 1 1 TRD 6 6 6 5 4 2 5 TRFC 51 51 42 42 30 27 42 ASY LAT 2 2 2 2 2 2 2 DDR2 667 / F2-5400 / F2-5300 NT Series LA Series ZX Series FSB SPEED 1066 1066 1066 DDR2 SPEED 800 800 800 VOLTAGE 1.85v 1.85v 2v TCL 5 4 4 TRCD 5 4 4 TRP 5 4 4 TRAS 15 12 12 CMS 1T / 2T 2T 1T 1T TRRD 3 3 3 TRC 20 20 15 TWR 5 5 5 TWTR 9 9 7 TREF 1 1 1 TRD 6 6 6 TRFC 35 35 27 ASY LAT 2 2 2 *IF THE OPTION IS NOT LISTED, PLEASE SELECT AUTO *FOR PRODUCT REQUIRES OVERCLOCKING FSB, PLEASE MAKE SURE CPU SPEED AND HTT RATIO AT THE CORRECT SPEED
02-11-2007, 10:18 AM
espionix

This helps alot, thanks.

I have the DDR2 1066 / F2-8500, just wanting to ensure it'll boot in the P5n32-E without any messing about with other sticks etc?
02-12-2007, 09:44 AM
GSKILL TECH

there should be no problem to boot up :)
well... at least no problem at our lab

GST
02-12-2007, 11:25 AM
JohnnyV

So as opposed to the "known" problems of EVGA boards possibly frying RAM the Striker actually likes G.Skill modules? I'm currently thinking of buying the 6400 HZ set but can't ease my mind about the mainboard. EVGA is €250 and the Striker is €300 but if the Striker is more safe I'd pay it.
02-12-2007, 02:01 PM
GSKILL TECH

Evga 680i no problem to boot up too. they already fix the bios low voltage issue with laster bios
02-12-2007, 02:52 PM
JohnnyV

Quote:

Originally Posted by G.S Technician

Evga 680i no problem to boot up too. they already fix the bios low voltage issue with laster bios

Perhaps I should try me an EVGA then...

I can imagine G.Skill is not happy if a mainboard it toasting memory and people are RMA-ing it a lot. Do you know how often this has happened or is that classified information?:rolleyes:
02-14-2007, 04:37 PM
GSKILL TECH

well if the ram is not working and model / type still under production, we will do rma no problem
which means if there is no more production of DDR1, lifetime warranty for any DDR1 product will be gone
03-03-2007, 05:51 PM
GAR

nice post, very usefull info, thanks.
03-03-2007, 06:37 PM
khurios2000

G.S tech does the PC8500 HZ timings will works on Asus P5N-E SLI?
03-05-2007, 11:20 AM
GSKILL TECH

Quote:

Originally Posted by khurios2000

G.S tech does the PC8500 HZ timings will works on Asus P5N-E SLI?

yes :)
03-11-2007, 07:27 PM
shimmishim

Couple of questions. I have the 8000HZ's.

1. Do the settings above work for the P5N32-E SLI PLUS? I assume so.

2. Will the board boot with one stick in this board? I seem to have problems getting into the bios with 1 stick. The SPD for the stick is programmed for 4-4-4-5 @ 500. No other SPD's are programmed.

3. Any tips on vNB, vtt, vHT?

I've been messing around with this mem for a day now and cannot get these set to do superpi 32M w/o rebooting my computer. If I set DDR2 to 800 4-4-4-5 then it works fine. Any attempt at 500 FSB crashes my computer. :(

Thanks.
03-12-2007, 11:08 AM
GSKILL TECH

Quote:

Originally Posted by shimmishim

Couple of questions. I have the 8000HZ's.

1. Do the settings above work for the P5N32-E SLI PLUS? I assume so.

2. Will the board boot with one stick in this board? I seem to have problems getting into the bios with 1 stick. The SPD for the stick is programmed for 4-4-4-5 @ 500. No other SPD's are programmed.

3. Any tips on vNB, vtt, vHT?

I've been messing around with this mem for a day now and cannot get these set to do superpi 32M w/o rebooting my computer. If I set DDR2 to 800 4-4-4-5 then it works fine. Any attempt at 500 FSB crashes my computer. :(

Thanks.

yes it works for p5n32-e plus, however, since motherboard will auto pick up the SPD or EPP, it might not boot up with 2 sticks. that is becasue the voltage too low. for vnb, vtt,vht are nothing i can help. you can ask around for it. i will suggest you test with FSB1066/ddr2 1000 to make sure ram is working no problem
03-12-2007, 11:13 AM
shimmishim

Quote:

Originally Posted by G.S Technician

yes it works for p5n32-e plus, however, since motherboard will auto pick up the SPD or EPP, it might not boot up with 2 sticks. that is becasue the voltage too low. for vnb, vtt,vht are nothing i can help. you can ask around for it. i will suggest you test with FSB1066/ddr2 1000 to make sure ram is working no problem

thanks!

I've done more testing and i'm pretty sure it's the board.

This is SO unusual but it works fine at 2000/1000 linked 1:1 and has no problems with superpi 32M.

if i set it at 1600/1000 unlinked (effectively 4:5) windows crashes. :(

so I can run 3.5 ghz 1:1 7 x 500 but can't run 3.6 ghz 4:5 9 x 400.

the next question you'll probably ask is, can my chip do 3.6? i'm using more than enough voltage to do 3.6.

i'll keep testing and i'll also see if the board will boot with one stick. i tried one stick yesterday but it wouldn't work.

if it doesn't work with one stick, is there anyway to get the SPD reprogrammed to something like 5-5-5-15 ddr2-533?
03-12-2007, 02:07 PM
GSKILL TECH

Quote:

Originally Posted by shimmishim

thanks!

I've done more testing and i'm pretty sure it's the board.

This is SO unusual but it works fine at 2000/1000 linked 1:1 and has no problems with superpi 32M.

if i set it at 1600/1000 unlinked (effectively 4:5) windows crashes. :(

so I can run 3.5 ghz 1:1 7 x 500 but can't run 3.6 ghz 4:5 9 x 400.

the next question you'll probably ask is, can my chip do 3.6? i'm using more than enough voltage to do 3.6.

i'll keep testing and i'll also see if the board will boot with one stick. i tried one stick yesterday but it wouldn't work.

if it doesn't work with one stick, is there anyway to get the SPD reprogrammed to something like 5-5-5-15 ddr2-533?

it is just not boot up or totally bad?
03-13-2007, 12:12 AM
GAR

i have an issue also, at times my board wont boot when i start my pc up in the morning, my settings are 400x9 ram at 550mhz ram is stable once i get into windows passes orthos with no problem, cpu is stable as well, if it boots sometimes i get a long beep wich doesnt stop, also when booting sometimes it sets default settings, default spd for cpu and ram, but when i go into bios my settings are there like nothing has been touched, and all i have to do is exit and save and all is good....but its getting annoying anyone else.
03-19-2007, 07:48 AM
shimmishim

Quote:

Originally Posted by G.S Technician

it is just not boot up or totally bad?

When I clear the CMOS, the voltages all go back to default.

Even with 1 stick in any slot (1-4) will not allow the board to boot.

It gets to the boot logo screen and then gets stuck there. It will not allow me to enter the bios.

I am sure it has to do with the SPD programing on the sticks. It attempts to boot the sticks at ddr2-1000 at board default voltage of 1.8, not 2.2.

If i stick in my crucial ballistix which are spd programed to boot up at 5-3-3 ddr2-667, i can get into the bios, change voltage to 2.2, remove them and then stick in the HZ's and they boot up fine.
03-19-2007, 08:59 AM
GSKILL TECH

Quote:

Originally Posted by shimmishim

When I clear the CMOS, the voltages all go back to default.

Even with 1 stick in any slot (1-4) will not allow the board to boot.

It gets to the boot logo screen and then gets stuck there. It will not allow me to enter the bios.

I am sure it has to do with the SPD programing on the sticks. It attempts to boot the sticks at ddr2-1000 at board default voltage of 1.8, not 2.2.

If i stick in my crucial ballistix which are spd programed to boot up at 5-3-3 ddr2-667, i can get into the bios, change voltage to 2.2, remove them and then stick in the HZ's and they boot up fine.

yeah that is totally voltage problem
do you want us to reprogram it? i can do that for you or just use SPD tool to do it by you self is good
just need to becareful
03-19-2007, 09:00 AM
GSKILL TECH

Quote:

Originally Posted by GAR

i have an issue also, at times my board wont boot when i start my pc up in the morning, my settings are 400x9 ram at 550mhz ram is stable once i get into windows passes orthos with no problem, cpu is stable as well, if it boots sometimes i get a long beep wich doesnt stop, also when booting sometimes it sets default settings, default spd for cpu and ram, but when i go into bios my settings are there like nothing has been touched, and all i have to do is exit and save and all is good....but its getting annoying anyone else.

that sounds like motherboard issue.
most the problem is voltage is enough for D2 1000 to boot up
03-19-2007, 09:22 AM
shimmishim

Quote:

Originally Posted by G.S Technician

yeah that is totally voltage problem
do you want us to reprogram it? i can do that for you or just use SPD tool to do it by you self is good
just need to becareful

If I do it myself, would I be voiding the warranty on the modules?
03-19-2007, 09:35 AM
GSKILL TECH

Quote:

Originally Posted by shimmishim

If I do it myself, would I be voiding the warranty on the modules?

no it won't cuz i tell you to do so. :)
03-19-2007, 09:41 AM
shimmishim

Quote:

Originally Posted by G.S Technician

no it won't cuz i tell you to do so. :)

:)

thanks!
03-26-2007, 05:31 PM
Mezzro

Where to Buy G.Skill 1066 F2-8500?

I'm interested in buying G.Skill's DDR2 1066 / F2-8500 online, but can't find it. NewEgg doesn't stock it; who does? Thanks
03-28-2007, 08:12 AM
GSKILL TECH

Quote:

Originally Posted by Mezzro

I'm interested in buying G.Skill's DDR2 1066 / F2-8500 online, but can't find it. NewEgg doesn't stock it; who does? Thanks

our 1066 HZ is tested on P975 motherboard which is much difficult than other mobo. however, recent IC is not stable as before. we rather produce small amount of 1066 than customer not happy
04-04-2007, 01:44 AM
SchiuZ

Hi, I would like to have 4 Gbytes of RAM on my Asus Striker motherboard. Can you please tell me if I can use 4 modules of Ddr II 2Gb (2x1Gb) G.Skill F2-6400PHU2-2GBHZ. It will work on the Striker with 4 modules? Thank you.
04-06-2007, 12:43 AM
SchiuZ

Quote:

Originally Posted by SchiuZ

Hi, I would like to have 4 Gbytes of RAM on my Asus Striker motherboard. Can you please tell me if I can use 4 modules of Ddr II 2Gb (2x1Gb) G.Skill F2-6400PHU2-2GBHZ. It will work on the Striker with 4 modules? Thank you.

Waiting for an answert please :D. If that RAMs are not good to run in 4 modules tell me other GSKill RAMs that are working, thank you.

Show 100 post(s) from this thread on one page