PHENOM II AM3/DDR3 Ram Overclocking List

Printable View

Show 100 post(s) from this thread on one page

08-18-2010, 01:48 AM
FlanK3r

Chew, how much RAM voltage for this? I have 1.625V and 1700 MHz 7-7-7-21-1T (low heatsink passiv at RAMs, A-DATA 2000X). Do u think, can i higher with RAM voltages for 24/7? Want about 1800 MHz cl7...Thx
08-18-2010, 01:49 AM
chew*

Quote:

Originally Posted by FlanK3r

Chew, how much RAM voltage for this? I have 1.625V and 1700 MHz 7-7-7-21-1T (low heatsink passiv at RAMs, A-DATA 2000X). Do u think, can i higher with RAM voltages for 24/7? Want about 1800 MHz cl7...Thx

I find anything over 1.7125 creates heat.
08-18-2010, 09:26 AM
FlanK3r

ok, il try max with about 1.7, i hope 1750 MHz cl7 is possible
08-18-2010, 10:26 AM
Tomasis

Chew, thanks for the story. It is much harder than I thought :eek: It is easy to get angry if other call you lucky.
08-18-2010, 12:19 PM
crazydiamond

chew im not discrediting your hard work by any means, or saying you havent earned all your hardware. im just saying that when you come in saying how easy it is, or how bad peoples internal timings are, etc., might not always be the best way to put it since your comparing your best results from heaps of hardware to someone who has 1 rig. thats all. dont get me wrong, i love seeing what you can do, i just dont care for it when its used to down credit someone elses hard work. no harm bro,, and as always, lookin forward to more results. feel free to pm me if you want to talk more, we'll leave this thread for good ram results

and to help stay on topic, my best 32m on these supertalent 2200c8

1790mhz 6.6.6 - 1.735vdimm in bios
http://s70.photobucket.com/albums/i8...m1790c6c-1.png
08-18-2010, 02:06 PM
chew*

Quote:

Originally Posted by crazydiamond

im just saying that when you come in saying how easy it is, or how bad peoples internal timings are, etc., might not always be the best way to put it since your comparing your best results from heaps of hardware to someone who has 1 rig. thats all. dont get me wrong, i love seeing what you can do, i just dont care for it when its used to down credit someone elses hard work.

Sometimes you misinterpret what i'm trying to say.

Internal latencies of a board you can not tune.

So when i say that internal latencies are looser it's becasue that board is running slack aka less performance per clock to acchive a higher speed........come on 6-6-6 2000?

Look at the hwbot maxxmem comp, massman beat that 6-6-6 2000 run at 1940 with MSI ;)
08-18-2010, 09:45 PM
Barr3l Rid3r

Not bad for air...

http://i34.tinypic.com/mwb7n4.jpg
08-19-2010, 03:47 AM
Skulltre

Please update the scores :D

I'll come back for more once i get my hands on an X6.
08-19-2010, 04:54 PM
Barr3l Rid3r

Quote:

Originally Posted by Skulltre

Please update the scores :D

I'll come back for more once i get my hands on an X6.

For the actual table looks like I'm the first for "stable" SPI 32MB at Cas6, nice. But there should be much better achievements than that among the thread. Where have the GTX2 gone?

WC coming...

anyone knows if the STT 2000 C7 are any better than the 2200 C8?
08-19-2010, 07:40 PM
equinox1

equinox1 , 938 mhz , 7-7-7-24 1t , 1.685v , 4689mhz cpu , 2x2gb corair dominator gt's , asus m4a89td pro , 890fx
http://i31.photobucket.com/albums/c3.../938memcl7.jpg
http://i31.photobucket.com/albums/c3...938memcl72.jpg
winxp 64 bit chilled water

and for the interesting part of the chart

equinox1 , 979 mhz , 7-7-7-24 1t , 1.685 , 2x2gb corsair domnator gt , asus m4a89td pro , 890fx , 4774mhzcpu
http://i31.photobucket.com/albums/c3...1024162156.jpg

spi1m nor spi32m will work on these settings in winxp 32 bit but wprime32 and wprime1024 work fine. strange?
08-19-2010, 10:39 PM
chew*

Quote:

Originally Posted by equinox1

spi1m nor spi32m will work on these settings in winxp 32 bit but wprime32 and wprime1024 work fine. strange?

Wprime = no stress on ram at all thats why 1m 32m spi won't work.

Quote:

Originally Posted by Barr3l Rid3r

For the actual table looks like I'm the first for "stable" SPI 32MB at Cas6, nice. But there should be much better achievements than that among the thread. Where have the GTX2 gone?

2000 c6 is the highest but not updated yet.
08-19-2010, 11:18 PM
m0n4g3

What's your guys secret for 3000+ CPU-NB speeds.... i just can't seem to get 3000+ working on my cpu :(

Temps are roughly 18C ambient with water loop in sig?
08-19-2010, 11:26 PM
chew*

Quote:

Originally Posted by m0n4g3

what's your guys secret for 3000+ cpu-nb speeds.... I just can't seem to get 3000+ working on my cpu :(

temps are roughly 18c ambient with water loop in sig?

1.4 cpu_nb?
08-19-2010, 11:29 PM
G.Foyle

Quote:

Originally Posted by chew*

1.4 cpu_nb?

And more usually != better :)
08-19-2010, 11:51 PM
chew*

Quote:

Originally Posted by G.Foyle

And more usually != better :)

Yep and also keep in mind some of these guys may be on chilled water or dragging there water/air rig outside during winter. Cold plays as much of a role as voltage.
08-19-2010, 11:57 PM
FlanK3r

im wonder, what will happen in winter days...4900 MHz for me think. Im using better now lower voltage 1.2V CPU-NB and 2800 MHz its ok :-)
08-20-2010, 03:18 AM
m0n4g3

might try a 1.425v run a lil later although i beleive i have tried this without much luck but we will see.

Thanks for the advice chew*! :D
08-20-2010, 05:43 AM
Barr3l Rid3r

Quote:

Originally Posted by chew*

Wprime = no stress on ram at all thats why 1m 32m spi won't work.

2000 c6 is the highest but not updated yet.

2000C6 is nice? what board, ram and cooling for this? Mine could go further but my mobo doesn't allow me, I have to use use it at Ganged mode to go above 1750Mhz on it.

that 1800Mhz C6 is done w/ 1.70 on air.

2 Doubts:

1-) Do you think a WC will help me w/ the RAM OC?
2-) SPI32mb is a single thread or multi-thread benchmark? Should I set affinity to only one CPU for better results?
08-20-2010, 05:50 AM
chew*

Quote:

Originally Posted by Barr3l Rid3r

2000C6 is nice? what board, ram and cooling for this? Mine could go further but my mobo doesn't allow me, I have to use use it at Ganged mode to go above 1750Mhz on it.

that 1800Mhz C6 is done w/ 1.70 on air.

2 Doubts:

1-) Do you think a WC will help me w/ the RAM OC?
2-) SPI32mb is a single thread or multi-thread benchmark? Should I set affinity to only one CPU for better results?

Gigabyte you will likely hit a wall at 1880 unganged if thats what your using in your sig, however i have not used the UD5 so I can not confirm.

Board was CH4F

Cooling was water, ram was air.

Do I think water cooling will help? yah sure the cooler you can run the less stress on cpu. Too cold bugs IMC, but we are talking -80 and colder.

SPi yes is single threaded, run on one core, even try disabling cores and finding your best core but never less than 2 cores so windows has something to offload on :)
08-20-2010, 06:03 AM
Barr3l Rid3r

Quote:

Originally Posted by chew*

Gigabyte you will likely hit a wall at 1880 unganged if thats what your using in your sig, however i have not used the UD5 so I can not confirm.

Board was CH4F

Cooling was water, ram was air.

Do I think water cooling will help? yah sure the cooler you can run the less stress on cpu. Too cold bugs IMC, but we are talking -80 and colder.

SPi yes is single threaded, run on one core, even try disabling cores and finding your best core but never less than 2 cores so windows has something to offload on :)

That sounds like a lot of work, lets just stick w/ that 1800mhz run for a while.

1880MHz wall? I think that more like IMC dependant.

at 1720mhz mine ram isn't stable at 1.65v unganged but it is at 1750mhz ganged, so thats very fun to understand, NB can reach lower clocks on ganged mode also.

Another thing, I ordered some MCP 655 + Ek Supreme HF + XSPC RX240 and some 1/2 fittings. That's just for the CPU, Do you think a MCR120 in the same loop will help me or just add some restrictions? I intend to do something like this: MCP655> RX240>CPU>MCR120>MCP655
08-20-2010, 06:09 AM
chew*

Quote:

Originally Posted by Barr3l Rid3r

That sounds like a lot of work, lets just stick w/ that 1800mhz run for a while.

1880MHz wall? I think that more like IMC dependant.

at 1720mhz mine ram isn't stable at 1.65v unganged but it is at 1750mhz ganged, so thats very fun to understand, NB can reach lower clocks on ganged mode also.

Another thing, I ordered some MCP 655 + Ek Supreme HF + XSPC RX240 and some 1/2 fittings. That's just for the CPU, Do you think a MCR120 in the same loop will help me or just add some restrictions?

1880 is board limit depending on revision. Ganged causes a rather large hit in performance just so you know.

I would stick with a single rad.
08-20-2010, 07:17 AM
Barr3l Rid3r

Quote:

Originally Posted by chew*

1880 is board limit depending on revision. Ganged causes a rather large hit in performance just so you know.

I would stick with a single rad.

Yes maybe cause I choosed a high flow system, the shorter loop w/ more flow should have about the same performance, but maybe the MCR after the CPU and before the pump can help things a bit.

Pump will be fixed in a XSPS D5 reservoir w/ better flow..
08-20-2010, 07:31 AM
chew*

I doubt it will make a diff but i don't keep up with times or do normal water cooling myself. I used a 3x120mm and a ln2 pot conversion to massive waterblock no res just oldschool T-line. It's preety untouchable in load apps.
08-20-2010, 08:09 AM
crazydiamond

for x6 i recommend at least 3x120 worth of rads for 1.5v+... rads are hardly restrictive so cpu only loop adding a rad will have benefit as long as they are both getting fresh air

also barrel, the 2000c7 might be a tiny bit better than 2200c8, but your c8's look pretty nice. not worth trying to upgrade IMO
08-20-2010, 08:20 AM
Barr3l Rid3r

Quote:

Originally Posted by crazydiamond

for x6 i recommend at least 3x120 worth of rads for 1.5v+... rads are hardly restrictive so cpu only loop adding a rad will have benefit as long as they are both getting fresh air

also barrel, the 2000c7 might be a tiny bit better than 2200c8, but your c8's look pretty nice. not worth trying to upgrade IMO

enough benefit or just 1C in load temperatures?
08-20-2010, 08:30 AM
sam3

Sam3 |923Mhz | x6 1090t 4039mhz | 7-8-7-24 1T | 1.74v | 2x2GB G-Skill Tident DR3-2000 CL9 | ??? | Asus Crosshair IV | 890FX | Link

Heres mine, Its my everyday machine so nothing extreme :rolleyes:

http://i185.photobucket.com/albums/x...th_superpi.png
08-20-2010, 08:39 AM
stangracin3

you need to crank that northbridge to atleast 2700
08-20-2010, 08:53 AM
Barr3l Rid3r

Quote:

Originally Posted by Barr3l Rid3r

enough benefit or just 1C in load temperatures?

Crazy? __
08-20-2010, 10:43 AM
crazydiamond

idk exactly how much improvement but with my water cooling (3x120 worth of rads + high fpi + high cfm), 1.55v is around 55c. 2x120 rad i would imagine pushing at least 60c. i would do 3x120 worth of rads :shrug:
08-20-2010, 11:23 AM
wez

Quote:

Originally Posted by Barr3l Rid3r

enough benefit or just 1C in load temperatures?

This is a 965 running 4.1ghz 1.55v, single 3x120 against two 3x120 rads w fairly quiet fans in push/pull
http://www.techreaction.net/wp-conte...ngle_chart.png
A reasonable boost if you ask me :)
08-20-2010, 03:37 PM
Barr3l Rid3r

Quote:

Originally Posted by wez

This is a 965 running 4.1ghz 1.55v, single 3x120 against two 3x120 rads w fairly quiet fans in push/pull
http://www.techreaction.net/wp-conte...ngle_chart.png
A reasonable boost if you ask me :)

but thats 5c adding 3x 120 more , so adding 1x of 120 more i will have an 1.6c improovement?
08-20-2010, 04:33 PM
crazydiamond

thats only x4,,, x6 will see more benefit. my x4 & x6 both at 1.55v have 10c difference in load temps (x6 hotter obv.).. its up to you dude but if it was me building another x6 rig & planning on pushing 1.55v+ gotta be at least 3x120 IMO
08-21-2010, 07:39 AM
Barr3l Rid3r

nice, so im goint to try that. thanks
08-21-2010, 11:01 AM
m0n4g3

Guys, just remember that surface area is just as important as fan choice.

I went from the coolermaster 120mm 60cfm fans to the scythe sfles 1900rpm 110cfm ones, and i've dropped like 10c and that's going from a 940be to a 1090t aswell!

Mind you i did change water blocks aswell but ah well. :P

BTW!

THANKS chew*

If i ever see you in person, i'm soooo buying you a beer!

Finally cracked the 3000mhz CPU-NB!

managed 3010 @ 1.45v, but anymore and it don't like it. Just doesn't even boot up. Might need lower temps or something not sure... :(

i suppose for 24/7 3010 is reasonable.
08-21-2010, 03:44 PM
Sanousie

Here is my new result with the updated F7 bios for the 890GPA-UD3H, G.skill trident F3 Dualchannel kit 2000mhz 2x2gb
http://www.overclockers.com.au/pix/i...bph8d&f=1'
Click to view full size!
Still tweaking, Cooled via cascade.
08-22-2010, 09:36 AM
Dnomi

Just for fun - I do not and will not run superpi on my computer, its a very old I386 program of no importens today.

AX3U2000XB2G9-2X <-- Cheap memory

CL9: http://dnope.dk/download/file.php?id=13&mode=view
CL8: http://dnope.dk/download/file.php?id=11&mode=view
08-22-2010, 02:12 PM
chew*

Quote:

Originally Posted by Dnomi

Just for fun - I do not and will not run superpi on my computer, its a very old I386 program of no importens today.

AX3U2000XB2G9-2X <-- Cheap memory

CL9: http://dnope.dk/download/file.php?id=13&mode=view
CL8: http://dnope.dk/download/file.php?id=11&mode=view

the purpose of running it is to set a guidline for stability and nothing more.
08-22-2010, 02:40 PM
Dnomi

chew - I made this screenshot a few weeks ago, i could make a new one - But naa.. It is only for fun:)
08-22-2010, 04:11 PM
Cele303

My first hands on Gigabyte 890FXA-UD5, Giga looks good so far, Noctua NH-D14

http://a.imageshack.us/img833/1252/spi32m4485cl6.jpg
08-23-2010, 09:57 AM
Barr3l Rid3r

Very nice result, wich wonderful ram is that and how many Voltage for this?
08-23-2010, 10:58 AM
Ccaution

Same questions here...! Ooohhh, and what batch is that badboy?
08-23-2010, 11:48 AM
mrcmtl

2x4GB G.Skill Flare DDR3-2000 8-9-8-24 1.65V. Nothing fancy.

http://img163.imageshack.us/img163/6348/89940835.png

Uploaded with ImageShack.us
08-23-2010, 12:04 PM
Ccaution

Nice - but give that HTLink a better multi mate ;)
08-23-2010, 12:06 PM
Cele303

Quote:

Originally Posted by Barr3l Rid3r

Very nice result, wich wonderful ram is that and how many Voltage for this?

Quote:

Originally Posted by Ccaution

Same questions here...! Ooohhh, and what batch is that badboy?

Dominator GT CM*** 1866 7-8-7-20, 3x2GB kit... 1.75V used but that's not their best they can hit for 32M with 1.75V, it is too hot now, I need ac in my office at work, no ac at home, 4504MHz crash at loop 18

Batch is 1021APMW, retail...

Best 6-6-5-15 1.75v Big Typhoon at winter

http://a.imageshack.us/img840/30/superpi32m.jpg
08-23-2010, 01:23 PM
FlanK3r

nice Cele, this is my loved aircooled Thuban :), im so lazy tweaking more RAM :-D
http://img191.imageshack.us/img191/1...2mhz2964mh.jpg
08-24-2010, 12:04 AM
Cele303

wow Flanker, I'm out of AMD lately but that looks like great chip you got there, is that 21°C spring temp or ac room?
08-24-2010, 11:21 AM
FlanK3r

hehe, its ambients in room. Outside spring temps was +- simillary think, dont remember now exactly :-). And yes, this chip is hell! Great chip, 3D Mark 05/06 at more than 4400 MHz! I can try at October hit about 4900 MHz validation :-) (max with 1.55V)
08-25-2010, 03:25 AM
sam3

Quote:

Originally Posted by stangracin3

you need to crank that northbridge to atleast 2700

Thanks for the tip :up:

Just tried it and it knocked 27 seconds of my superpi time :eek: :shocked:
08-25-2010, 07:16 AM
HanaJetso

1 Attachment(s)

HanaJetso | 813Mhz | 1.62v | 6-6-6-15 1T | x4 955 @ 3.9g | 2x2GB supertalent DDR3-2200 | Elpida Hyper | GA 790XTA-UD5 | 790FX |
08-25-2010, 08:42 AM
crazydiamond

nice, what ram & volts?
08-25-2010, 10:01 AM
HanaJetso

1 Attachment(s)

ram ? same you ;)
vlot ?
08-25-2010, 10:19 AM
Oese

updated so far. If you dont find ur result in the list, please edit your post like in the specifications on 1st post (too tired to pick the necessary information from the screens sorry :sofa: )
08-25-2010, 11:47 AM
HanaJetso

very sorry, edited
08-26-2010, 04:31 AM
Oese

edit 1st post :)
08-26-2010, 03:14 PM
Oese

someone has experience with elpida bbse?
08-27-2010, 07:32 AM
Skulltre

Quote:

Originally Posted by Oese

someone has experience with elpida bbse?

Then you should try those geil ultra 2133mhz 4gb kits..
08-27-2010, 09:54 AM
Oese

maybe i get some mushkins thats why i ask. but i dont know if its bbse or some other elpida BXXX
09-10-2010, 01:51 AM
Ad1os

Guys ...
Nice, thread :)

So, I'm Joined here ...

Gigabyte 870A UD3 :up:
Gskill Eco Cl7 12800 :clap:

No Tweak!!

http://img822.imageshack.us/img822/6237/cl5bus880.jpg

Thanks
Adios
09-10-2010, 04:28 AM
Alex-Ro

Cas 5?? Is that really on,i mean you gain something from CAS6 to CAS5,or it's a bug?And what Gskill model specific:D?
09-10-2010, 05:04 AM
ah_khoo

my humble attempt... nothing great but should be decent enough i think.... :yawn:

http://forum.lowyat.net/index.php?ac...ost&id=1774636
09-10-2010, 05:37 AM
Barr3l Rid3r

Quote:

Originally Posted by ah_khoo

my humble attempt... nothing great but should be decent enough i think.... :yawn:

very good, Is it micron ?

I did some testing w/ Kingston HyperX 2000 C9 and reach 2000Mhz C7-10-7

But I dont like that TRCD so I gave up testing.

testing STT (My CPU loves TRCD 7)

http://i55.tinypic.com/e184uh.jpg
09-10-2010, 05:59 AM
ah_khoo

Quote:

Originally Posted by Barr3l Rid3r

very good, Is it micron ?

thx mate... :)

i don't think they're micron inside, most likely PSC cause these sticks seem to love low volt. i might be wrong thou... :shrug:

btw, nice sticks u have there, are they on hyper? :wave:
09-10-2010, 12:22 PM
Barr3l Rid3r

Quote:

Originally Posted by ah_khoo

thx mate... :)

i don't think they're micron inside, most likely PSC cause these sticks seem to love low volt. i might be wrong thou... :shrug:

btw, nice sticks u have there, are they on hyper? :wave:

yes the low voltage part is weird, but your TRCD is low, so probably ELpida BBSE?

Yes that STT uses Hypers
09-10-2010, 01:20 PM
Ad1os

Quote:

Originally Posted by Alex-Ro

Cas 5?? Is that really on,i mean you gain something from CAS6 to CAS5,or it's a bug?And what Gskill model specific:D?

*** Alex_Ro ;

Honestly, I dont know it's a bug or not ? But, I get it directly from the bios settings (Re: not use, memset, aod, etc)
Just info, there are not different result between cas 6 and cas 5 in my system :)

*** Gskill model ; Eco 7-8-7-24 12800 1.35 V

Check this Validation

http://img440.imageshack.us/img440/2...dasicl5880.jpg
09-12-2010, 06:13 PM
ah_khoo

Quote:

Originally Posted by Barr3l Rid3r

yes the low voltage part is weird, but your TRCD is low, so probably ELpida BBSE?

Yes that STT uses Hypers

i tried 2 pair of bbse in geil ultra 2133 & team xtreem 2k, both can do same frequency but need around 1.7v. these sticks behave almost d same as gskill flare (which i think running on PSC chip) minus d capability to do 1600 @ 6-7-6. even 7-7-7 is not doable. :(

btw, i guess this is d max i can achieve with my poor propus... :shakes:

http://forum.lowyat.net/index.php?ac...ost&id=1777490
09-12-2010, 06:42 PM
chew*

Quote:

Originally Posted by Ad1os

*** Alex_Ro ;

Honestly, I dont know it's a bug or not ? But, I get it directly from the bios settings (Re: not use, memset, aod, etc)
Just info, there are not different result between cas 6 and cas 5 in my system :)

*** Gskill model ; Eco 7-8-7-24 12800 1.35 V

Check this Validation

http://img440.imageshack.us/img440/2...dasicl5880.jpg

It's likely a bug with bios if you see no gains performance wise as you would surely see gains. So cas 5 in bios is the same as 6 in bios.
09-12-2010, 08:01 PM
Barr3l Rid3r

Yes, I can definately see gains while running Cas5 in Elpida Hypers.
09-13-2010, 12:04 AM
Ad1os

Quote:

Originally Posted by chew*

It's likely a bug with bios if you see no gains performance wise as you would surely see gains. So cas 5 in bios is the same as 6 in bios.

Yup Master, I seem to agree with you :)
09-13-2010, 01:34 AM
Tomasis

adios, can u run superpi 32m at 6-8-6 and 7-8-7 (no need for 5-8-5 if it is bug)

im a bit surprised that gigabyte can do cas6 now of gskill psc.. im curious
09-13-2010, 04:09 AM
Ad1os

@Tomasis

Here U request M8 :)

http://img690.imageshack.us/img690/4936/cl7880.jpg

http://img163.imageshack.us/img163/3466/cl6880.jpg

*** my daily run :

http://img832.imageshack.us/img832/6472/cl7bus900.jpg

Final : "but not stabil"

http://img295.imageshack.us/img295/3170/cl7bus1000.jpg

I think, Gigabyte 870A-UD3 perfect!!! :clap:
09-13-2010, 11:22 AM
Tomasis

adios, thank you much :up:.. two sec difference hm.. i forgot to ask if u tested 6-7-6? :p 7-9-7 2000 looks cool :)
09-13-2010, 03:40 PM
Ad1os

Quote:

Originally Posted by Tomasis

adios, thank you much :up:.. two sec difference hm.. i forgot to ask if u tested 6-7-6? :p 7-9-7 2000 looks cool :)

Welllcome M8, 6-7-6 only stabil at 1600 :-P
09-13-2010, 06:15 PM
Barr3l Rid3r

Maybe this should help w/ my memory overclocking now.

http://i51.tinypic.com/acfygo.jpg

http://i55.tinypic.com/2yyp9b7.jpg
09-13-2010, 06:17 PM
chew*

Nice looking pile you got there man :up:
09-13-2010, 08:45 PM
Barr3l Rid3r

Quote:

Originally Posted by chew*

Nice looking pile you got there man :up:

Thanks man, lets see if it works nice also.
09-13-2010, 08:47 PM
Ad1os

Yup, that's good hyper U got there :clap:
09-14-2010, 02:40 AM
Tomasis

Quote:

Originally Posted by Ad1os

Welllcome M8, 6-7-6 only stabil at 1600 :-P

probably hard get the same speed for bench,.. with 1055T :P but let me know how fast it is on superpi32m on 1600 ;) if you want ..
09-18-2010, 04:15 AM
ah_khoo

my latest attempt... pardon d low clock speed, d ram only like ddr 1600 divider for such frequency... :(

http://i54.tinypic.com/4rrwoj.png
09-30-2010, 12:12 PM
Barr3l Rid3r

some playing

http://i53.tinypic.com/jkx57b.jpg

http://i52.tinypic.com/25spqpe.jpg

http://i53.tinypic.com/svky3b.jpg

http://i56.tinypic.com/4r3l3a.jpg

http://i55.tinypic.com/33di8hs.jpg

http://i52.tinypic.com/o1gzq.jpg

http://i56.tinypic.com/fyco5g.jpg

http://i54.tinypic.com/svrl6o.jpg

http://img194.imageshack.us/img194/8516/previewwc.jpg

http://img251.imageshack.us/img251/7673/gab2o.jpg

http://img830.imageshack.us/img830/8417/wc3.jpg

http://img811.imageshack.us/img811/2066/wc2v.jpg

Antes TRUE 120 Black AiR

http://img805.imageshack.us/img805/489/prime4095air.jpg

Depois WC

http://img3.imageshack.us/img3/8002/primewc.jpg
10-02-2010, 05:42 PM
ah_khoo

finally make it @ 2k prime stable, but unfortunately trcd need to be dropped to 10... :(

http://forum.lowyat.net/index.php?ac...ost&id=1813784
03-25-2011, 07:26 AM
Punisher!

Damn, I just bought A-Data XPG V2 1866 (Hypers)... are G.Skill ECO better than them?
03-25-2011, 08:23 AM
Barr3l Rid3r

Quote:

Originally Posted by Punisher!

Damn, I just bought A-Data XPG V2 1866 (Hypers)... are G.Skill ECO better than them?

v2.0 I think aren't hypers, BBSE maybe.
03-25-2011, 11:13 AM
Punisher!

Quote:

Originally Posted by Barr3l Rid3r

v2.0 I think aren't hypers, BBSE maybe.

They are Elpida Hyper MNH-E according to RAM list... will they perform worse than G.Skill ECO?
03-25-2011, 11:38 AM
Barr3l Rid3r

Quote:

Originally Posted by Punisher!

They are Elpida Hyper MNH-E according to RAM list... will they perform worse than G.Skill ECO?

I doubt it, Adata XPG 2200 C8 rev 2.0 are hypers and one of the worst binning ones. there is a big gap there don't you agree? BBSE are capable of 1866 C8-8-8 but only hypers can handle 2200+ @8-8-8...
03-25-2011, 11:45 AM
Punisher!

Quote:

Originally Posted by Barr3l Rid3r

I doubt it, Adata XPG 2200 C8 rev 2.0 are hypers and one of the worst binning ones. there is a big gap there don't you agree? BBSE are capable of 1866 C8-8-8 but only hypers can handle 2200+ @8-8-8...

Ok, tell the RAM List creator then ( http://ramlist.i4memory.com/ddr3/ )... anyway I think you don't have idea so much clear seeing that A-Data 2200 here is King of the Hill:
http://www.xtremesystems.org/forums/...d.php?t=241401
03-25-2011, 11:57 AM
I.nfraR.ed

I.nfraR.ed | 966.6MHz | Phenom II X2 555 @ 4500MHz | 6-6-6-18-11 1T 90ns | 1.78V? | 2x2GB Corsair Dominator GTX2 2250C8 | Elpida Hyper MGH-E | Asus Crosshair IV Formula | 890FX | Link

http://i.imgur.com/PUbML.png

Don't remember the exact voltage, sorry. The CPU was on water cooling.
03-25-2011, 12:00 PM
Barr3l Rid3r

Quote:

Originally Posted by Punisher!

Ok, tell the RAM List creator then ( http://ramlist.i4memory.com/ddr3/ )... anyway I think you don't have idea so much clear seeing that A-Data 2200 here is King of the Hill:
http://www.xtremesystems.org/forums/...d.php?t=241401

and? any hyper I've seen can about handle that... I've got only 25 sticks in my hand....

GTX2 is the king of the hill, followed by: kingston> dom gt 2000 C7 > dom gt 1600 C6 > adata 2200 C8 and super talent 2000 C7 >stt 2200 C8 > stt 2000 C8 > Dom gt 2000 C8 and g.skill PS.
03-25-2011, 12:02 PM
Punisher!

Quote:

Originally Posted by Barr3l Rid3r

and? any hyper I've seen can about handle that... I've got only 25 sticks in my hand....

GTX2 is the king of the hill, followed by: kingston> dom gt 2000 C7 > dom gt 1600 C6 > adata 2200 C8 and super talent 2000 C7 >stt 2200 C8 > stt 2000 C8 > Dom gt 2000 C8 and g.skill PS.

ROTFL then tell me why your SST are running @1720Mhz.
03-25-2011, 04:04 PM
Barr3l Rid3r

Quote:

Originally Posted by Punisher!

ROTFL then tell me why your SST are running @1720Mhz.

that's very simple, first it isn't @ 6-7-6 but 6-6-6, second I use only 1,65v for 24/7, not 1,75v, mine are 2200 C8 w/ are a bit worse than adata and STT 2000 C7 as I said, and for last I'm in an AMD system that aren't very stable
+ 1900Mhz w/ tight timming.
03-26-2011, 12:07 AM
Punisher!

Quote:

Originally Posted by Barr3l Rid3r

that's very simple, first it isn't @ 6-7-6 but 6-6-6, second I use only 1,65v for 24/7, not 1,75v, mine are 2200 C8 w/ are a bit worse than adata and STT 2000 C7 as I said, and for last I'm in an AMD system that aren't very stable
+ 1900Mhz w/ tight timming.

What do you mean with "an AMD system that aren't very stable"?

I have made mine to go @ 2000Mhz with low-priced Corsair XM3... I think I have a good memory controller:
http://digilander.libero.it/m4puni/p..._2000Mhz_s.jpg

Shouldn't I expect more from A-Data?

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 09:03 PM.

XtremeSystems