If it was only as on screen 1h20m p95 stable than I would say it is nowhere near rock solid.Quote:
Originally Posted by riokabuto
:)
Printable View
If it was only as on screen 1h20m p95 stable than I would say it is nowhere near rock solid.Quote:
Originally Posted by riokabuto
:)
Maybe he has already burned it whit intelburner :confused:Quote:
Originally Posted by seban
Well he didnt mention it so who knows :up:
i'm tryingQuote:
Originally Posted by carepolice
but now i have 1,3
i'll try to set 1,2 later
Quote:
Originally Posted by riokabuto
Are you wanting a stable 500 or just a bootable superpi 500? For 487 I use 1.3875vc, .655gtls, 1.58, 1.4, 1.38, .665nbgtl, this gets me 8+ hours prime blend. For 471 I use 1.30vvt and 1.32nb.
how much test time for the RS - intelburn ???Quote:
Originally Posted by carepolice
i'm downloading it !
10 test for max memory (1 - Maximum Stress)
20 test for half of memory
then this is no good for you ?Quote:
Originally Posted by carepolice
http://img220.imageshack.us/img220/3...kresizejn4.jpg
http://img220.imageshack.us/img220/l...jpg/1/w800.png
M8 I am not sure if it is to me or not but I will answer as I am bored :D ATM.Quote:
Originally Posted by riokabuto
So it really does not matter if it is good for us or not, what matters is it good for you? And in fact what really matters is if it is good for your system.
And answer for last of my previous questions is - No M8, I am sorry but 10 passes of IBT says nothing without around 12h of p95 Blend. When you reach 12h of blend and 10 Passes of full stress IBT then you might be stable. If you care about being stable you should follow this road (but even after 12 prime and 10 IBT you can still be not stable).
Have fun :up:
problems...Quote:
Originally Posted by carepolice
with level 1 i receive always an error...
with all system on default too...
with level 2 no problem...
i have to disable the PAE ( i have 4 gb ram ) ????
I would help you but I do not know your MB also you did not post your template. Anyway the best place to look for answers is thread of your Mobo. Look for one here on XS and probably there will be ppl able and willing to assist you with your problems. :up:Quote:
Originally Posted by riokabuto
+1000Mhz out of the box (vcore lower than vid :-) )
http://img518.imageshack.us/img518/2...board01hr5.jpg
http://img518.imageshack.us/img518/c...pg/1/w1280.png
+ validation
wow.. thats very good. and no the vcore isn't lower than the VId.. thats just the vdroop that always happens. it's probably set to 1.2500 in the BIOS. but nice work either way.
anyways I had a question for everyone that has a Q9550. Could you guys all post your VID's Please.. possibly with screenies.
There's a guy wanting to sell me his Q9550, and he says the VID is 1.1750. thats a pretty darn low VID, and it would probably clock like mad. So I'm wondering what everyone'd VID's are. and can you all post ur max clocks as well. Thanks!
That's mine vid:)Quote:
Originally Posted by xguntherc
Look here
Linpack 298out of 300 passed:)
http://s57.radikal.ru/i156/0901/27/f41abc1fee84t.jpg
Prime 95 @4080Mhz
http://s39.radikal.ru/i085/0901/04/55b16cf2e684t.jpg
Prime 95 @4200Mhz ( didn't test with lower Vcore just set to 1,424 at random)
http://s58.radikal.ru/i159/0901/f7/cff4bd83ea93t.jpg
That is with CPU Cooler Zerotherm ZF120
You shouldnt make sweeping statements like that.Quote:
Originally Posted by seban
What your idea of stable is dosent make it law...others will have different opinions myself included.
12 hours of prime is rediculous, its like the guy that was telling everyone to run IBT 50 to 100 loops:shocked:
Kill your hardware thats up to you, but dont advise others to do so.
if I were you I would look for a good S-spec / FPO number, cause I've seen low vid CPUs OCing worst than "high" vid ones. For my Q9550 both CoreTemp and RealTemp report 1.25 vid, but for some reason SiSoftware Sandra says Min Core Voltage 0.713V, Max 1.138V which is valid cause the CPU is perfectly stable at default speed with 1.1V the lowest voltage my mobo allows me.Quote:
There's a guy wanting to sell me his Q9550, and he says the VID is 1.1750. thats a pretty darn low VID, and it would probably clock like mad. So I'm wondering what everyone'd VID's are
Mines a 1.225vid and the highest stable clock so far is 487x8.5. It will probably go higher but Im not going to try for it until I get better cooling.
Hello Everyone
my first results after few hours of playing whit this CPU
http://img136.imageshack.us/img136/5...shot002wt1.jpg
http://img136.imageshack.us/img136/s...pg/1/w1920.png
Still need to tweak NB,FSB VTT, RAM any advice welcome. I will poste stable results soon
Q9550 EO VID1.1875 OC 4.0GHz(easy?) V1.224 TRUE120
Asus Maximus Formula X38 mod Rampage Formula bios 0701
4Gb Transcend aXeRam PC2-8500 DDR2 1066MHz+1124 5-5-5-15 PL7 for now
OCZ XTC Memory Airflow Cooler
Sparkle 8800 GTS 512 OC 807/1161/1998 + Arctic Cooling Accelero S1 Rev.2
Samsung F1 750GB
Seagate 320 GB Barracuda 7200.10
Coolermaster cm690 + 14 fans
Scythe Kaze Master Ace 5,25 Black
Chill Innovation CP-700M PSU
Logitech Z-5500
Highest primed is 8.5 x 500 FSB...
Hey everyone!
Just received my new Q9550 E0 chip 2 days ago to replace my Q6600, as it would not allow me to come near the magical 4Ghz border which I wanted to cross as part of my New Year's resolutions... ;) Luckily, I seem to have a decent combo with my rampaged P5E dlx and Q9550, as crossing the 471fsb for 4Ghz was quite painless:
http://i449.photobucket.com/albums/q...ime_stable.jpg
Stepping: L830B496, VID of 1.25V
The settings used are basically:
vCore = 1.368v
FSB vtt= 1.36v
vNB = 1.59v
vDimm = 2.06v (bios), 2.10v (real)
Strangely enough, it only needed 1.29vCore for 3.9Ghz, so I was quite surprised how much extra vCore it needed for a mere 100Mhz increase? I also needed to up the NB from 1.5v to 1.59v for the 4Ghz... :confused:
Also, I was wondering if there's anything wrong with my core temperatures, bearing in mind I'm under a dedicated waterloop with 3 radiators (water temp ranges from 33C to 37C). I've been searching a lot on what kind of temps people are getting, and these seem comparable to people on air so I'm not sure if my cooler is mounted right. The thing is that a lot of people still seem to be using the tjmax of 95C, leading to their temps being displayed as 5C lower.
Crossing 480fsb has proven more difficult, and while posting at 500fsb, it will not boot Vista, so I was just wondering what kind of results people have been getting with x48 chipset and E0 q9550, using what voltages? My aim now is to reach 500 fsb so I can run my ram 1:1 close to its rated speed of 533 at their tightest timings... ;)
Nice clock work on it. You probably have all cores tem. stuck. Like mine 1-38c, 2-32c, 3-31c, 4-31c it wont get any lower even if i open all my windows and ambient is 7c. No a big issue as long i have good reads from load.
Hi,
My new Q9550 E0 - cooled on water cooling ;)
1h stable on Prime95 - VC in BIOS 1.28v :D
http://images24.fotosik.pl/320/6fb65d05f695bb56.jpg
I couldn't get past 430fsb on the x38. I'd consider yourself lucky... either that or quite the talent.Quote:
Originally Posted by les_paulde
Seriously guys could you stop showing off please :)
My VID is 1.1 on my EO and I cant get past 3.6 on this chip. Pretty sure I should be getting much more. Running it at stock as nothing is stable.
I know its not my board as I got 4 GHZ on my E8400 on it.
Any help? Think its a dud?
Time to review this thread.
Max(for now) on my x38 limited mobo and skills. 50c on NB is limiting me(40mm fan on it). I would like to have GA-EP45-UD3P to see full potential from this cpu. I can boot up to windows whit 495 FBS but not stable.
http://img140.imageshack.us/img140/7...shot003ay6.jpg
http://img140.imageshack.us/img140/s...pg/1/w1280.png
Looks like you have the chip with the same VID as mine.Quote:
Originally Posted by cencik
The results are close as well. Mine can get to 471x8.5 with 1.2125v, Prime 95 overnight (over 7 hrs) rock solid.
Kind of miss that chip as I've made a horrible mistake to sell it off...:(
I would like to HIGHLY recommend the Gigabyte EP45-Extreme to anyone wanting to push this chip. Check out what I managed to achieve after only a couple of hourse, fully >8 hrs prime stable (both blend and small ffts):Quote:
Originally Posted by cencik
http://i449.photobucket.com/albums/q...x85_stable.jpg
I didnt even need to mess with any skew or reference voltage settings. I just set up some voltages, guessed a good vNB (1.36v on p45 chipset) for 4Gb of PC8500 ram and this FSB and went for it. After bumping up vCore one notch, it was fully stable and I was just like :eek2:.
I couldnt believe it was so easy to push this mobo and the NB temps are still below 48C!! Compared to my older rampaged P5E dlx, this baby really shines in all aspects. While my older mobo was capable of priming at 471 fsb, it was still not 3D stable, whereas my Extreme fully is. It's like this mobo was made for 45nm quads!
awesome:up::shocked:
les_paulde impresiv results, push this baby to the limitos(no rush). 2 questions in my mind. Your VID and do you feel(see) any benefits between 4.0GHz<4.5GHz in real world application,games,GPU OC?
I discovered that when LLC is disabled(X38) i can run lower NB,CPU voltage, much lower FSB VTT. Now just 1.26v. Maybe it's my high but system seems to be more responsive and overall temperature is lower. Soon i need to do vdrop mod and maybe set ram to 1:1 PL10 for max FBS just to see if i can accomplish my goal 490X8.5 stable. From now i just start my OC from the beginning.TBD,TBC
Okay okay, I'm working on it! :D :rofl:Quote:
Originally Posted by cencik
The VID of my chip is 1.25v.
I haven't been able to crawl up to 4500Mhz yet, but I have successfully reached and benched at 4403Mhz. I must say that honestly, while the differences in feel between 4Ghz and 4,5 are small, they are definitely noticeable. Windows boots up faster and the overall system seems more responsive. But I guess with a bandwidth of >10,000mb/s on both write and copy, this could make sense... ;) 3dmark06 and Vantage both definitely scale up their cpu points nicely with higher frequencies though, so the further you push it the better it seems.
Hope I managed to answer your question?
mine:
q9550 E0@4.03GHz@1.30V L837B058 (Malay)
474x8.5
P5Q-Pro 1613BIOS LLC enabled
coretemp 0.99.4 reads: 1.2125V
I got my Q9550E0 today. Pack Date: 02/04/09 Batch L830A956 Vid:1.2500
480X8.5 @1.3500Vcore Zalman CNPS 9700 I'll try to lower it but I have doubts. It's been stable so far
Room temp 29 heater is on as Istanbul is freezing cold:shakes:
I've tried 500fsb and wasnt able to make it stable no matter what voltage I give Nb it boots then blue screen. I know it is not the mobo as I overclocked my E8400 525x8 and used 7/24 without any issues. need more voltage need serious cooling I think...
http://img255.imageshack.us/img255/227/prime.jpg
and a bench done today all on air vga on stock.
http://img518.imageshack.us/img518/2629/246k.jpg
Goblin: If your motherboard can handle a C2D at 500FSB+.... It is a completely different situation for a C2Q
most people say is it is not easy to pass 500fsb wall on quads.and quads really need high Nb voltage for over 500fsb, while I was tryin for 500fsb I was only able to boot when I set NB voltage to 1.44. I'd better keep on trying.
What are your exact voltages actually? (vtt, vMCH, pll, vCore)
Straps?
Are High FSB i.e. 500 on quads really need high vNB?Quote:
Originally Posted by //GobliN//
Ans: Yes for X38/X48 and NO for P45.
I order to get my Q9650 Stable I need nearly 1.7v vNB
compare with dual cores, E8500, need 1.65v vNB to Pass 10 loop IBT @ 600FSB.
I totally agree, I only need 1,32v on vNB for 500 * 8,5, fully stable, even with 4Gb of ram and crossfire.Quote:
Originally Posted by ci2kla
Here are my voltages in case it may help anyone:
http://i449.photobucket.com/albums/q...ings500fsb.jpg
(although the screenie currently only shows ~1hr of prime, this has been fully tested >10hrs)
CPU Voltage: 1.3500 LLC enabled 1.347-6 @loadQuote:
Originally Posted by les_paulde
CPU GTL Voltage Reference (0/2): 670
CPU GTL Voltage Reference (1/3): 670
CPU PLL Voltage: 1.62
FSB Termination Voltage: 1.28
DRAM Voltage: 2.16
NB Voltage: 1.38
with my old E8400 I only need to set NB to 1.28 525 fsb daily usage. But now you have said 1.7nb all things are more clearQuote:
Originally Posted by ci2kla
try suggestions in bold, they're working great for me.Quote:
Originally Posted by //GobliN//
I'll give it a try now.:up:
How does the EP45-DQ6 fare against the EP45-Extreme? I like the DQ6 for more connectivity, and I read somewhere (the Q9650 thread?) that the DQ6 actually tops it with the FSB numbers.Quote:
Originally Posted by les_paulde
I know the UD3P probably trumps both boards in clocks but somehow I feel it cheats by slackening the memory/northbridge performance. For example, a 500*8.5 performance at UD3P probably equals that of 480~490*8.5 at either DQ6 or Extreme. If this is true it means I have to pay more electricity to get UD3P to deliver what DQ6/Extreme can do for the same amount of work.
I had a little bit fun with my q9550 ^^
http://www.abload.de/thumb/prime_4ghz_2_stundenw2aj.jpg
Just air cooled with great temps
From what I've read (i can't for the life of me find the source again, but it was in several threads), it seems that the only way to be sure which one will do higher fsb on quads is by knowing if the motherboard you buy contains the newer revision of the P45 chipset. Supposedly there are 2 versions, and it's the later one that allows people to obtain ludicrous fsbs, even with quads.Quote:
Originally Posted by vws
But then again, I dunno. At least from what I've read in the various P45-Extreme threads, everyone at least manages to get 500fsb stable on quads, and they all do it without having to touch things like skew or reference GTLs. I dunno if its the same with the EP45-DQ6, but I could imagine it is so. Another benefit of the EP45-Extreme is that it was build for extreme overclockers, meaning that you can put outrageously high voltages through your components without the need for vMods. Finally, but this is a total assumption, it would seem that the EP45-DQ6 tries to cater for multimedia purposes etc., while the EP45-Extreme's purpose is hidden in its name, and therefore it would seem logical that the EP45-Extreme allows higher fsbs. But as I said, they are very similar motherboards, both based on the ultra durable 2 series, so I reckon it comes down to the individual's luck when choosing between the two.
Thanks Les_Paulde, your feedback is helpful! Seeing as how both Extreme & DQ6 have gone through almost the same BIOS update cycles I think both boards should behave similarly under the same settings - except that the Extreme allows wider voltage range. BTW, I think you meant A2 and A3 revisions of the P45 chipset, correct? Do you happen to know what most people have got from the Extreme lately? Hopefully they're all A3 now?Quote:
Originally Posted by les_paulde
Amazing temps even with Tj.Max=100, at 1.344v and full load @ 4025MHz... now are you catching a cold after this?Quote:
Originally Posted by 0verl0ad
1.7vNB is for X48 not for P45...:up:Quote:
Originally Posted by //GobliN//
Actually not.Quote:
Originally Posted by vws
My windows was closed and the roomtemp about 18°c
Like nearly every day ^^
Hehe no worries, you're welcome!Quote:
Originally Posted by vws
Yeah you're right, they were the A2 and A3 versions. I just finished building my rig last week though, and as its being watercooled I cannot just take out my mobo without it costing me another weekend.. ;) So I don't know if CPU-z reads it out right, but it seems I did get an A2-version... :mad:
http://i449.photobucket.com/albums/q...45_version.jpg
But then again, even with this version I can reach 518fsb, 3d- and bench-stable, so I can't really complain. Now I just need some nice 4Gb of ram that will either do 1200mhz CL5 or 1000mhz CL4, anyone got any recommendations?
So you must be using some sort of waterchiller, right? *is-jealous-of-Overloads_water-temps*Quote:
Originally Posted by 0verl0ad
No it is still air cooledQuote:
Originally Posted by les_paulde
I´m using a ZEROtherm Nirvana NV120
The case side is open, when it´s closed the temp is about 4-5°c higher
Wow man, just wow! :clap:Quote:
Originally Posted by 0verl0ad
EDIT: sorry, got confused, thought you were on water (which would have made sense considering those temps!) Nevermind... ;)
I still use an air cooler ^^
This one
http://www.xsreviews.co.uk/images/nirvana/stock.jpg
I´d like to know what i can reach under water :D
http://farm4.static.flickr.com/3563/...81440771_o.png
Decided to test my Q9550 on a A3 rev board, just threw in some voltages, here it is...
1.32V NB, 1.25V VTT, 8GB RAMs
Nice and easy going! Which mobo is this on?Quote:
Originally Posted by sabe
This is on a replacement board DFI P45-T2RS PLUS I got as a loan because my DFI JR P45 died :P
les_paulde In spite of your helps mobo and cpu failed at 500 fsb. there is something else limiting me I think.Thank you for your help. my max daily fsb 483 FSB x8.5 memory @ 1160 mhz. after 3.5 hours of prime I stopped it. It ended without errors and warnings
http://img149.imageshack.us/img149/6928/bench.jpg
Question for you sabe -- is it pretty much given that most DK PLUS boards have the A3 chipset lately, do you know?Quote:
Originally Posted by sabe
What mobo would you choose for a Q9550 E0? I have seen some really good results with the Giga P45-UD3R/P series. Anything else?
I couldn't really give you an answer on this one, it really depends on how much the retailer moves his stock and whether he always moves out the old boxes first. But I've bought this board on 2 other occasions new to help friends out with their rigs and it was both A3.Quote:
Originally Posted by vws
They sell to me one q9550 batch l828a844 it(he) is good? Is it(he,she) E0 or c1? THAT vid will have
http://www.abload.de/thumb/prime_425...tunden3gev.jpg
I had some fun tonight ^^
helpme plizzz
I'm assuming you haven't heard about the intel spec finder then?Quote:
Originally Posted by Mikefra2008
http://lmgtfy.com/?q=intel+spec+finder
That site will tell you everything you need! :yepp:
@sabe : occt stable too ? because I just discover my settings stable with linx but occt crash after 3-5 mins ... so I re-set to stable on both ...
My Q9550 E0 L828B096 :
436*8.5
vcore: 1.296v
GTL 0.630x
0.680x
PLL: 1.52v
VTT: 1.22v
vNB: 1.16v (0.660x)
-> Rock@Solid
For 450*8.5
vcore: 1.35v
Same GTL
PLL: 1.56v
VTT: 1.38v
vNB: 1.38v (0.660x)
-> Not Stable
It's Normal ???
:confused:
Helllp !
What kinda cooling are you using?Quote:
Originally Posted by 8800's@over
What are you guys using to post your SS's? Cannot seem to get anything to work now.
Was able to get my q9550 EO LinX and Prime Blend stable @500x8.5, 333strap 5:6 1200mhz. CPU vcore 1.35v bios, 1.312v cpuz, 1.30v VTT and 1.360v MCH. I Can thank my EP45 UD3P board for it, is a great board for overclocking core2quads.
www.imageshack.us has always worked well for me.
Paint.NET is a good freeware painting program for cropping and chopping.
RealTemp makes it easy to find your processor's specs.
Click on the About... menu item and then click on the Intel Spec Finder button at the bottom.
http://img510.imageshack.us/img510/6087/rt320.png
Thanks unclewebb. Not real clear but best I could figure out how to do lol. http://i587.photobucket.com/albums/s...rime500x85.jpg
Noctua NH-U12PQuote:
Originally Posted by Tekdemon
Idle 35° Cores
Load (intel Burn Test)
58° Cores (3.7GHz)
MotherBoard 35° Idle & Load.
my settings thus far:
UD3P (F9b Bios) Q9550 E0 (L835B166) pack date: 11/11/2008
LinX (Max Mem) 20X Stable - Yes
Robust Graphics Booster.....................[ Auto ]
CPU Clock Ratio.............................[ 8 ]
Fine CPU Clock Ratio........................[ 0.0 ]
CPU Frequency 4.0GHz........................[ 500*8.0 ]
******Clock Chip Control******
CPU Host Clock Control......................[Enabled ]
CPU Host Frequency (Mhz)....................[500 ]
PCI Express Frequency (Mhz).................[100 ]
C.I.A 2.....................................[Disabled]
******Advanced Clock Control******
CPU Clock Drive.............................[ 1000mv ]
PCI Express Clock Drive.....................[ 1000mv ]
CPU Clock Skew..............................[ 0ps ]
MCH Clock Skew..............................[ 50ps ]
******DRAM Performance Control******
Performance Enhance.........................[ Turbo ]
Extreme Memory Profile (XMP)................[ Disabled]
(G) MCH Frequency Latch.....................[ 400MHz ]
System Memory Multipler.....................[ 2.00d ]
Memory Frequency (Mhz) .....................[1000 DDR2]
DRAM Timing Selectable......................[ Manual ]
CAS Latency Time............................[ 5 ]
tRCD........................................[ 5 ]
tRP.........................................[ 5 ]
tRAS........................................[ 15 ]
******Advanced Timing Control******
tRRD........................................[Auto ]
tWTR........................................[Auto ]
tWR.........................................[Auto ]
tRFC........................................[Auto(52)]
tRTP........................................[Auto ]
Command Rate (cmd)..........................[Auto ] (PL=9)
******Motherboard Voltage Control******
Load-Line Calibration [Enabled]
CPU Vcore [ 1.25 ]...............[ 1.3500 ] (1.328 CPU-Z)
CPU Termination [ 1.20 ]...............[ 1.28 ]
CPU PLL [ 1.50 ]...............[ 1.570 ]
CPU Reference [ 0.760 ]...............[ 0.835 ]
MCH Core [1.1 ]...............[ 1.32 ]
MCH Reference [0.760 ]...............[ 0.850 ]
MCH/DRAM Refernce [0.900 ]...............[ 1.000 ]
ICH I/O [1.500 ]...............[ 1.500 ]
ICH Core [1.100 ]...............[ 1.100 ]
DRAM Voltage [1.800 ]...............[ 2.02 ]
DRAM Termination [0.900 ]...............[ 1.000 ]
Channel A Ref [0.900 ]...............[ Auto ]
Channel B Ref [0.900 ]...............[ Auto ]
******Advanced BIOS Features******
Limit CPUID Max to 3........................[ Disabled ]
No-Execute memory Protect...................[ Enabled ]
CPU Enhance Halt (CIE)......................[ Disabled ]
C2/C2E State Support........................[ Disabled ]
C4/C4E State Support........................[ Disabled ]
CPU Thermal Monitor.........................[ Enabled ]
CPU EIST Function...........................[ Disabled ]
Virtualization Technology...................[ Disabled ]
Nice going with the 500 fsb spinejam! What was your PL set to?
thanks!Quote:
Originally Posted by OC Nub
PL = 10 (per memset 4.0) :)
You may be able to use PL9 with Frequency Latch 400-200d.Quote:
Originally Posted by spinejam
Try 471 of FSB, I have tried:
0.60x
0.63x
0.64x
0.66x
0.65x
0.65x
0.65x
0.67x
0.69x
0.69x
PLL 1.54v - 1.56v - 1.58v
VTT 1.30v - 1.32v - 1.36v
NB 1.30v-1.32v - 1.36v
GTL - .64 x .65 x .66 x
CPU and NB Skew 100 and 200PS
Do not pass the 2 / 5 IBT test.
What can be?
The memories are stable.
I dont know what is good for a Q9550 E0, but mine is 1.19v VID and runs 425*8.5 @ 1.21v VID or otherwise 1.21v Vcore. I haven't bothered going any higher on my current DFI board with this chip. But it happily runs 3.6ghz @ 1.20-1.21V with EIST/C1 enabled.
Q9550 C1 @ 460x8.5=3,92Ghz (1,320v cpuz / pll 1,60v / vtt 1,40v) @ P5E Rampaged Intel X38 , vnb 1,45v, strap 333, ai booster=lighter, pl=10 , gtl @ auto , 2x2Gb OCZ FlexII @ 1105Mhz 5/5/5/15/auto@2,10v
Here screenshot @ 468x8.5@1,312v but occt doesn't pass , play with hight voltages & gtl & tweaks , nothing more , I think x38 stop here with quad ...
with my old e8400 e0, playing wih 520x8 http://sonic9.free.fr/q9550/temps_q9...12v_noctua.jpg
ps: now I'm play with noctua nh-u12p , 90° with linx ... with my old xp90 temps are hotter , like ~136° ;-)
yep, thanks for the tip! faster everest memory benchmarks w/ pl=9. :)Quote:
Originally Posted by OC Nub
Nice man.:up:Quote:
Originally Posted by spinejam
My Q9550 E0 In 481*8.5 With Zalman CPNS9700LED Pass Every Test As Well
Other Setting In Auto+2.2 Volt For DDR Voltage+C1E Disabled
what's the highest o/c you've seen w/ these Q9550's (air-cooling)?
Quote:
Originally Posted by spinejam
Ive seen 4200/4300 overclocks with some good batches.
On the Gigabyte UD3/UD3R/UD3P thread, check out PangingIII's OC's with the q9550, pretty high Clocks.Quote:
Originally Posted by spinejam
I am currently running a Q9550 @ 4.25ghz @ 1.3ish v's (would have to double check) I havent played with it much. Have been running 100% load on all cores 24/7 for months now. Been running WCG and F @ H non-stop for a few months now.Quote:
Originally Posted by spinejam
I think If I played with it; I could get it higher. Load temps are in the 50* range.
I am using a gigabyte UD3P and 4gig kit of Mushkin ram; oh this is with an OCZ Vendetta 2 HSF.
My Q9550 E0 - L844B
Prime 2:30hs
http://img149.imageshack.us/img149/4...037mhz125v.jpg
Linx 1024 com 20 loops
http://img149.imageshack.us/img149/8...204037125v.jpg
Linx 2048 - 1.24v
http://img141.imageshack.us/img141/1...104037124v.jpg
Meus parabéns Fguarezi :clap:
Nice clock with low volts.
could you please post your complete batch number?
Valeu :) :up:Quote:
Originally Posted by monza1412
Batch not remember, do not write :rofl:.
Put my q9550 back in to play with some more, ran this today.
awesome chip man, congratz for you too :up:Quote:
Originally Posted by OC Nub
What is your highest stable speed? 4250/4300mhz?
you should change your nickname btw :rofl:... jk
Thanks, 4250mhz-1.35v bios is my max so far, temps get to warm to go higher on air.
very nice o/c OC Nub! :)
Thanks man.
this is what I have achieved so far...
http://s3.subirimagenes.com/imagen/p...222captura.png
My motherboard has maxed out at this point (P35 chipset). Soon I will be jumping to the ud3p wagon, so hopefully I will get better clocks for sure.
Nice OC Monza, great vcore also.:up:
nice run mate :up:Quote:
Originally Posted by OC Nub
Cheers
Sergio
Quote:
Originally Posted by OC Nub
thanks buddy :)
Thanks andressergio.Quote:
Originally Posted by andressergio
Hi Some Bench With My Quad
http://img98.com/images/lb81u4efxpu8kstf5z1u_thumb.jpg
3D Mark Vantage>>> 15810
http://img98.com/images/ff4zyf0h7vwu6th3_thumb.jpg
3D Mark 03>>>>>>> 81608
http://img98.com/images/7p8xc2pv1vb5yi4rjm07_thumb.jpg
3D Mark 06>>>>>>> 24307
http://img98.com/images/rh4qn1hfnq1z4xow5g_thumb.jpg
Aqua Mark>>>>>>> 171080
http://img98.com/images/rfrd3p9zc2fhjz0zogvc_thumb.jpg
But i'm Never Stable Over 500 FSB Any Sugestion For Over 500 FSB Just For CPU Frquency Take Shot In CPUZ
I Use Water Cooling And My IDLE Temp 5C :D
Nice numbers vivid :up:Quote:
Originally Posted by ViViD
Cheers
Sergio
Very nice vivid!!Quote:
Originally Posted by ViViD
I am not familair with that motherboard, I had to adjust the clock skew to get 500fsb stable on the UD3P but I stopped there, my temps get to high to keep pushing.
Quote:
Originally Posted by andressergio
Tanx FriendsQuote:
Originally Posted by OC Nub
I Try On End OF Each Week Test And Try And Try:D
I Hope Can Get 25K On 3D 06
Here's My Resualt On Week 2 Of Lord OverClocking
http://www.futuremark.com/community/...ional09/week2/
In End List:D