Printable View
I have not had this experience with previous core 2 chips. So, am I to understand, as I hope, that the reported temps are largely bogus and that it is safe to proceed based on vCore. Experience tells me that any vCore under about 1.45 is not going to get too hot. After all, if it gets too high the chip will throttle and if the sensor is reporting high it will throttle at a lower temp, no??Quote:
Originally Posted by Zucker2k
1.33v real, cpuz is lying lol... 4.695ghz done
put it to 1.38v real for 4.812ghz but got a BSOD after saving the pic lol :D
Striker II Formula and Vista, still got <10s @ under 4.7ghz :D
I know I know it's not top notch but at least I got under 10 :D
Funny score mate, that 9.999sec. :D
How are the temps/tempsensors on that cpu of yours?
Well the radiator air out says 26.5c and coretemp says both cores 29c... don't think I can expect any lower right?
Under Orthos load it doesn't reach above 48 on both cores in the first minute, so it's not exactly a heat monster either :)
All this @ 1.33v :) very very impressive this cpu, but then again, judging by the FPO/Batch I already could expect this :up:
Definitely highly recommended :up:
Just got this response from unclewebb concerning E8600 Tj max.
So Real Temp should be giving correct temps.
Zeus, I got mine from Norks-IT (norksit.com)
Little quick test (Thermalright HR-01+):
http://img229.imageshack.us/img229/9...8x525prvk8.jpg
I shared some findings about mine Q820A599 here.
Ok... Q820A405 from the Egg. 1.2125 VID. this striker II has issues at 1800fsb. Wont run 5 min at 1800 with any multi. 1900 x 9.5 is my initial stable OC for 4513mhz on air. 1.42 in bios 1.47 in windows. Max temp is 80c. I've ran prime 95 for about 30 min so far. Stopped it to get memory benchmarks then re-started for this SS to show load temps. I will tweak more and show more stability tests including 3D soon. Just wanted to get my initial numbers up for those who are watching. I may switch to intel chipset mobo now that ATI has some awesome video cards..... Sorry i strayed a lil lol. bbs with more numbers.
http://img149.imageshack.us/img149/3258/e8600gf1.jpg
This is what i have done so far in early testing on Q820A599:
http://i526.photobucket.com/albums/c...240hrblend.jpg
:)
Tekxpert you have an awesome chip!
Jumped the gun too early and got an e8600es but couldn't complain about the price of $249 - lapped it b4 I even tested it, lol!
I know it ain't retail but not a great one yet not a bad one - qhex q814a527 vid 1.1375
Still testing but I think i might settle for this setting as 4.4ghz requires 1.38+vcore on this chip.
Seems to be the same story all over again - ES chips seem to require higher vcore but run cooler - this is on a TRUE aircooled rig =).
http://i246.photobucket.com/albums/g...69/e8600es.jpg
Some quick testing. Not the best batch but it works :)
Batch : Q820A602
VID : 1,2500
http://img382.imageshack.us/img382/3896/450x95mh0.jpg
http://img382.imageshack.us/img382/3...5c156fe87a.jpg
EDIT:
Here i got a 1hour run
http://img174.imageshack.us/img174/6749/450x95auc4.jpg
http://img174.imageshack.us/img174/6...f1fb743363.jpg
Q822 seems the best batch so far. Am i correct?
seems so.Quote:
Originally Posted by RealTelstar
I got q820a602 and not that happy with it.
Highest I tried is 4750mhz but needed 1.62 to get there on water.
9.984s super pi done there.
Doing orthos atm at 4.5ghz.
using 1.5vcore.
:eek: holy crap Garrett what nice score m8 :)
will post soon i installed my sweet e8600 to.
i cant say i`m very pleased with my Q822A...i expected ~100mhz more with that voltage...SS at -42C..this piece was very hot...25C difference from coretemp - evap temp..
http://www.imageshack.gr/files/k97t3q8zm0ohtroa0lr5.jpg
Quote:
Originally Posted by flopper
wow flopper that sucks :(
my little ole 8400 does 4.7 with much less volts and gets 9.838 pi thier
this was a 9.906 pi run here http://www.glowfoto.com/viewimage.ph...=1841&srv=img3
guess eyem looking for a 822 also:D
I was about to get me one but probably next month but when i saw Q822A435 was the stepping to have i new i had to rush things a bit.
Told the wife i couldn't hold out and just had to break out the wallet one more time.
She already knew it was too late to try to stop me. :D
Will rebuild my sys tomorrow, new mobo, new cpu and new tubing for my watercooling with new fittings.
Same Batch and CoreBatch (2V82311) as my 5Ghz @ 1.488v 32M chip :D
Over 5100 validation :)
http://valid.x86-secret.com/show_oc.php?id=402826
Some 5GHz+ SuperPi 1m action :D
-edit-
Somehow CPU-Z shows the vcore 0.09 too low, Everest has it right though :)
PS Zeus you have a WONDERFUL stepping too lol... you're gonna rock I just know it, congratulations in advance :up:
Got mine today, pleased to say i`ve got an Q822A435:D. No time to try it tonight, just got in from work. Playtime tommorow i think.
My E8600 just got here 30 minutes ago, testing just started, it's so hot, and the VID 1.1750V
BATCH Q820A306 from the egg
http://i112.photobucket.com/albums/n...g/Untitled.jpg
well :banana::banana::banana::banana: happens ;)Quote:
Originally Posted by HDCHOPPER
Its a 4.5ghz chip anyhow.
which is good enough speed.
just isnt the one speed increase I was hoping for.
It will hold me up until i7 is out and tested for buy.
:up:http://www.svensknlp.nu/databilder/4.5ghzorthos.jpg
Garrett buddy, thanks for the heads up about that store to get this cpu, it's literally a 5 min drive from my place. :D
I hope mine will be as good as yours and Chri$ch' , 5GHz on plain water is awesome and something i will aim for.
My sys is completly apart now, part are all over the kitchen table but the board is already in my case with the new golden cpu already on it.
Tomorrow i'm gonna do some plumbing work, do some leak testing and see how my cpu overclocks.
So yours needed 1.54Vcore to do 1M at 5GHz, right?
Exactly, from 4.8 and on it eats volts lol... hope you get your rig up and running soon, I'll leave it at this, I've done 5ghz now, 5ghz club member lol :D
I don't recommend 5ghz for 24/7 though ;)
go flopper ! :up:
My E8500 Q820A599
http://peecee.dk/uploads/082008/low_...4Ghz_final.JPG
Quote:
Originally Posted by Zeus
do all E8600 boxes say 1.26 v max ??
and some quick 32m action...load temp at -40C...
http://www.imageshack.gr/files/u0d75loipyoce9qykwd0.jpg
is that 32m on tuned single stage? which motherboard you using?
This is my 24/7 setting for now. DO u think ~1.40vcore is to high for 24/7 ? Running on water.
http://img518.imageshack.us/img518/8476/500x9aun0.jpg
http://img518.imageshack.us/img518/8...2db78e2c5e.jpg
[QUOTE=Turbodream;3216337]This is my 24/7 setting for now. DO u think ~1.40vcore is to high for 24/7 ? Running on water.
I am using 1.5 so dont ask me ;)
1.45 is the common sense for the most.
This is xtreme forum so i guess anything goes :D
Single stage yes.Quote:
Originally Posted by vanovich
mobo is Rampage formula,0407 bios.
My new CPU seems to be nice although i haven't played much with it yet.
Stable at 4GHz with just 1.12v, GTL voltages are at auto so i might be able to run it at even lower voltage if i mess with GTL settings.
OMG this looks better day to day :D
Maybe Intel made some very nice adjustments for their "last?" dualcore before nehalem? making us enthusiasts happy :)
and some 3D action...
http://www.imageshack.gr/files/7ztgmj87xaqy5w4qtxxb.jpg
giorgos th. I think 3D Marks Vantage would punch holes in that clock.
I dont even have Vista...hehehehe
Nice giorgos and thanks .
my specs ... trying to get my ram to run stable , any opinions , suggestions are welcomed ... ;)
got it today, pretty sexy chip with good temps cooled by true 120 and a couple medium yates, will let this run till i get home from work in 12.5 hours and i will repost a SS of that hopefully.
Not a Cpuz suicide shot i'm afraid. 5ghz stable, moving on to 5.1ghz now :D
http://ocidb.com/albums/userpics/100...ble_orthos.JPG
Just got my E8600 in. Man this puppy gets HOT compared to my E8400 at the same clocks. I'm at 4.4GHz now and tryin' for 4.5GHz on air. So far 4.4 is taking less volts than my E8400 did at 4.0. That right there was worth the upgrade to me.
I have the feeling trying to get to 4.5 is gonna take a LOT more volts than 4.4... we'll soon find out.
OK, 4.5 ain't gonna happen for me without moving my fans up from silent on my TRUE. 4.4 is solid at 1.328V CPUZ with silent fans. Good enough.
The jump to 4.5 was taking more than 1.425V!! No way I'd run that 24/7.
lol kitfit1, exactly what I thought, phasechange cooling, otherwise 1.4v for 5ghz stable would've been awfully good :D
Brahmzy update your sig lol... it still says e8400 :p:
Keep those results coming people, I love this :up:
I found the E8400s got really hot once you broke 4.2Ghz. Load went from low 60s to 70s at 4.3Ghz, I topped out due to the heat alone and that was water cooled.
exellent kitfit1 !
So I know about placebo and all, I've done what feels like hundreds of builds and upgrades and I'm telling you things just feel snappier. I don't know why, but now, with my E8600 I'm only getting 2.5 bars of the Vista x64 boot splash vs. 3.5 bars before. How is that possible - going from 4.0GHz to 4.4GHz.... Maybe it was the BIOS upgrade? Weird. But I've rebooted over 10 times now with the E8600 and I'm down to 2.5 bars consistently and things just feel hella fast. I LOVE this chip! :)
that chip looks like it's working out well for you..temps looks great:up:..ic you got setup on Asus board what was voltage increase on the O'c ? from default..i'm gonna run with a E8600 at the end of the when the price go's down or catch a deal first with Asus setup and water cooled..i just looking around seeing everybody's out come there test and benchmarks first..:yepp:Quote:
Originally Posted by Rattle
I'm going through the same thing here. I can run 9.5x 1880fsb for 4463mhz with 1.35v bios 1.39v windows. If i try 1900fsb for 4512mhz i can only get an hour and a half prime with voltages up to 1.5v. I wanted 4500 air 24/7 but i'll settle for 4463. Screen shot shows 1.41v windows but ive been stable for 3 hours now at 1.39v per everest.Quote:
Originally Posted by Brahmzy
http://img518.imageshack.us/img518/5981/capture2cz9.jpg
so guys 1.40v is safe for 24/7?
n what is max safe vtt for 24/7?
alright primed blend 13/5 hours while at work ! so great to come home to this !!
all board volts set to min including 1.1vtt, 1.325 bios LLC OFF, cpu features all off, chip hit 60c and idles 27/29 .....
500x9 would be complete orgasm, this is the chip that will make me jump to WC, who wants to help me with parts ?
I can't see your overclock, settings, or stress test in that picture
I can't either...:shrug:Quote:
Originally Posted by Arbitr
superpi 1m
http://www.pctunerup.com/up/results/...600pi8.500.jpg
cpuz 1,65volt
CPU-Z Validator 2.1
you cant see a 13.5 hour prime 95 run ? lol
there are just too many windows rattle, that is the problem
can't let you guys have all the fun
just arrived 5x E8600 are Q820A599 SLB9L 07/15/2008
http://i4memory.com/reviewimages/har...oreSSD_002.jpg
wtf ever dude, 440x10 1.325v all mobo volts min, look at the number in the prime 95 window and do the math if you cant figure it out.
I'm talking about your desktop! with one like that who cares about your overclock!
4 just wasnt enough, eh? :up:Quote:
Originally Posted by eva2000
g'luck with them :yepp:
Mine has been the same. 4.45 Prime stable at 1.382 actual. I have'nt found the secret for Prime stable above that yet. Bench stable up to 4.7 at above 1.425v in bios works, still playing with it. Finally broke the 10sec barrier in SuperPi, which was cool :up:Quote:
Originally Posted by Brahmzy
Just had a quick play and looks good. Q822A435 @ 4.5Ghz with 1.26v, VID 1.0875:D
Sorry to rain on your parade but CPU-Z reports the wrong Vcore on your board, approx. 0.09V too low.Quote:
Originally Posted by \/ENDE][A
Look at Asus probe, it's reporting right.
Still a nice overclock though.
Right now mine is running Orthos small ftt's at priority 1 at 4.3GHz with just 1.208V, i hope it will last, gonna let it run for at least an hour.
If it will do that it will be my 24/7 setting.
I found that instead of erroring out, my rig seems to have a habit of bluescreening instead but that could be due to too low V-northbridge or too low Vtt, both were at just 1.12V.
Still investigating. :)
Come on Zeus, give us some SuperPi 5GHz screens man :p:
It's the other way around it seems, now I have to push you to punish the cpu ;)
Will do mate. ;)Quote:
Originally Posted by Garrett
Right now i'm real busy to find out how to stabilize a decent overclock on this board.
I'm really struggling to dig all those new bios settings this board has.
Flashing from 0605 to 1201 gave me even more options, lol.
I already have a 4.9GHz SuperPi 1M screen but i stopped trying.
Booting at 5GHz into windows (or trying to) borked my windows really bad.
I haven't installed set fsb yet, i'm gonna need it as booting at 5GHz was a no-go. :(
@ \/ENDE][A
your VID is not 1.0875v, you use a old CoreTemp version. Your VID is 1.2000 ;)
This is my new Q822A435, VCore is 1.283 - 1.290v (PCProbe & LCD Poster)
http://www.abload.de/img/4.5ghz-prime-customsj4.png
5.08Ghz @ 1.544v (load) is max for SuperPi 1M
Very nice cpu Chri$ch. :up:
Seems mine is stable at 4.3GHz with just 1.208V, pretty pleased with that.
I think 4.5GHz with <1.3V is possible as well, will try later.
http://img.photobucket.com/albums/v6...rthos1208V.jpg
So far so good. :)
better yet, minimize all the windows, show us the "desktop" ;)Quote:
Originally Posted by Rattle
On my board (Striker II Formula, 780i chipset) Clockgen works flawlessly :)Quote:
Originally Posted by Zeus
Isn't that an option?
batch Q82A306 vid 1.1125
1.38v prime stable idle 43c load 61c
q820a405 from newegg. pack date 7/17/08. at default voltage it will do 4ghz, idle temps around 42c, load around 53c. at this vcore(1.26v) the second core fails prime95 instantly, which is ok because the load temps are passing 75c at that point anyway, so i cancel it. tried my regular xigmatek hs/f then an ultima90, both had great contact. heatsinks are very warm at idle.
http://farm4.static.flickr.com/3284/...ef77b090_b.jpg
XD :rolleyes:Quote:
Originally Posted by MaxT
5GHz done, couldn't run SuperPi unfortunately, have to wait for colder days i guess or i have to pump some more volts into it.
http://valid.x86-secret.com/show_oc.php?id=404179
:eek: got mine today at saturday. batch Q820A601
first attempt 5GHZ done :D
http://valid.x86-secret.com/show_oc.php?id=404239
:eek: even try at 5150mhz but when i save my cpu-z valid file but cpu-z will not save file at my harddrive :(
Well... volts please :DQuote:
Originally Posted by Zeus
What happened man did you become scared or something?
You've pumped 1.6v through your e8400 and e8500 before :D come on man :D :up:
Last update with regular water ;)
http://www.vmodtech.com/files/orthos-4734-1hr_894.png
5Ghz done:D. Boot from bios @ 1.45v.
It's raining 5GHz all over the place! :D
My cpu is the really funny, it runs 4.3GHz at just 1.2V which becomes 1.208V under load due to LLC and runs everything i throw at it, 1 hour Orthos small ftt's, blend, OCCT, 3d mark 06, aquamark03, superpi 32M, memtest in windows, memtest 86, all no problem.
But sometimes in explorer or just after booting into windows it happens to bsod.
Hell, it even bluescreened at windows installation! :(
I'm really puzzled about this so i set all voltages to auto and raised Vcore only 1 small step in bios and now all seems stable.
No more bsod so far. :shrug:
@ Garrett, me scared? :rofl: You must be kiddin mate, i'm only trying to find a stable 24/7 setting before i will move on to pumping some real Vcore. ;)
I could boot into windows 4.9GHz with just 1.48V and run 1M, then i tried with 1.52V and worked my way up with setFSB but superpi already failed at 4930MHz.
Perhaps my cpu isn't as good as yours.
Doesn't mean i'm giving up off course.
1M has got to be done at 5GHz. :D
Seems like u all got good Cpus. Mine really sucks. I never had luck with my cpus. Spent alrdy a lot of funds without any luck. :(
Mine is 1,275 4000mhz stable. 1,45V 4500mhz stable and got spi 1M 4900mhz 1,58V.:down::mad:
Using aircooling.
Get rid of loadline calibration, that is likely why you were unstable at idle.Quote:
Originally Posted by Zeus
Finally, let's take one last real-world look at the consequences of removing Vdroop. ASUS' implementation of this feature, labeled as Load Line Calibration and included with their latest line of motherboards, is particularly worthy of our attention for a number of reasons. The first is that setting lower voltages with this option enabled actually results in a condition in which the CPU voltage under load is higher than the idle voltage. Imagine our confusion as we desperately struggle to understand why our system is Prime95 stable for days yet continues to crash under absolutely no load. What's more, in spite of the absence of droop and for reasons unknown, enabling this feature artificially raises our CPU's minimum stable core voltage at 4.0GHz from 1.28V to about 1.33V. As a result, our system uses more power under load than is otherwise necessary. Our efforts to reduce our processor's supply voltage backfired - instead of lowering the system's total power consumption we managed to affect a 20W increase.
http://www.anandtech.com/cpuchipsets...spx?i=3184&p=6
we should create a club :DQuote:
Originally Posted by Kristoferr
never got a really good one yet.
Keep dreaming tho.
Quote:
Originally Posted by flopper
and then maybe put on a show!!!
Quote:
Originally Posted by Extelleron
Thanks for pointing out, already thought of that myself as i had seen that article at Anandtech a few weeks ago.
That's why i went with a tad more Vcore.
That's on air cooling Scythe Ninja 2.
Opinions?
Time sucks for 5050mhz.:shakes: But nice clock on air!:clap:
Without any optimising (processes, copywazza,and stuff, just CLEAN), achieved the freq and done!Quote:
Originally Posted by Kristoferr
Not bad ;)
SuperPI32M 2Thread ,1Thread & SuperPI1M @ 5GHz on Regular Water again.:D
http://www.vmodtech.com/files/32m-5000_563.png
Damn hot cpu
FPO Q820A596 VID 1.1375
My 2 quads dont run this hot
http://i237.photobucket.com/albums/f...r/8600_oc1.jpg
yah but your quad's a clean gigahertz slower.
Exactly.Quote:
Originally Posted by jaredpace
So what then would be a acceptable 24/7 setup, if you wanted the chip to last 8 months to a year.
Vcore ?
FSBT ?
PLL ?
Temps ?
I would like to think I have a decent wc setup so I was somewhat shocked at the high temps for this clock.
I would like to run 4500 for 24/7 but our house already has a furnace:rofl:
4.5 is easy its after 1.4v that it gets real hotQuote:
Originally Posted by Grnfinger
but for 6 months 5.0 is doable too
Those of you with the Q822's, where did you get them? I have a 24/7 4508mhz Q820 on air but i'm looking for a little more.....Were never satisfied are we? lol
Just went on HWBOT to keep track of the action. Here's the latest e8600 update:
one thing you should all take into consideration is of the top 10 e8600 overclocks on hwbot, 4 were done on a tpower i45 board that costs only $145.00 including the WR. 5 were on x48 Rampage extreme ($400 board) and 1 was on a GIGABYTE GA-EP45-DQ6 ($250.00)
http://www.hwbot.org/listResults.do?...true&limit=100
HWBOT Ranking For CPU-Z - Core 2 E8600 (3.33Ghz) (limited to top 10)
1 CPU-Z - 6761 mhz - boblemagnifique (Union Francophone Hwbot) 7.1 points - [ inspect ]
Processor: Core 2 E8600 (3.33G... @ 6761mhz [#1 Core 2 E8600 (3.33Ghz) in CPU-Z] on LN2 no image
Videocard: unknown
Memory: 2048MB DDR2
Motherboard: Tpower i45 P45
Global Rank: not in top 1000, not ranked yet, or not the best result with this hardware of this user.
Hardware Rank: 1st Core 2 E8600 (3.33Ghz) - 7.1 points
Description: First test , temp = -160° and 1.9v of vcore
Verfication: verification link
Scan date: 08-08-2008 10:52
Compare url: http://www.hwbot.org/compare.do?resultId=760597
Options: [ report][team][user][ evolution ][ log ]
2 CPU-Z - 6586 mhz - No_Name (AwardFabrik) 5.7 points - [ inspect ]
Processor: Core 2 E8600 (3.33G... @ 6586mhz [#2 Core 2 E8600 (3.33Ghz) in CPU-Z] on LN2 [ view screenshot ]
Videocard: unknown
Memory: 2048MB DDR3 PC16000 @ 1976mhz CL9.0 8-8-21
Motherboard: Rampage II Extreme
Global Rank: not in top 1000, not ranked yet, or not the best result with this hardware of this user.
Hardware Rank: 2nd Core 2 E8600 (3.33Ghz) - 5.7 points
Description: "Warm Up" GC2008, E8600 cooled with Otti Pott -130°C, Mushkin DDR3-2000, Mushkin 800W PSU, Asus Rampage Extreme. Please visit www.awardfabrik.de = OC-Paradise ;-) --www.awardfabrik.de/forum/showthread.php?p=190607#post190607
Verfication: verification link
Scan date: 10-08-2008 11:53
Compare url: http://www.hwbot.org/compare.do?resultId=761134
Options: [ report][team][user][ evolution ][ log ]
3 CPU-Z - 6554.83 mhz - joe_cool (Team OCX) 5 points - [ inspect ]
Processor: Core 2 E8600 (3.33G... @ 6555mhz [#3 Core 2 E8600 (3.33Ghz) in CPU-Z] on LN2 no image
Videocard: unknown
Motherboard: Asus Rampage Extreme
Global Rank: not in top 1000, not ranked yet, or not the best result with this hardware of this user.
Hardware Rank: 3rd Core 2 E8600 (3.33Ghz) - 5.0 points
Description: no description
Verfication: verification link
Scan date: 09-08-2008 06:45
Compare url: http://www.hwbot.org/compare.do?resultId=760702
Options: [ report][team][user][ evolution ][ log ]
4 CPU-Z - 6506.89 mhz - Brian y. (Team OCX) 4.3 points - [ inspect ]
Processor: Core 2 E8600 (3.33G... @ 6507mhz [#4 Core 2 E8600 (3.33Ghz) in CPU-Z] on LN2 [ view screenshot ]
Videocard: unknown
Memory: 2048MB DDR2 PC8500 @ 650mhz CL5.0 5-5-15
Motherboard: T45 P45
Global Rank: not in top 1000, not ranked yet, or not the best result with this hardware of this user.
Hardware Rank: 4th Core 2 E8600 (3.33Ghz) - 4.3 points
Description: no description
Verfication: verification link
Scan date: 13-08-2008 02:12
Compare url: http://www.hwbot.org/compare.do?resultId=761966
Options: [ report][team][user][ evolution ][ log ]
5 CPU-Z - 6491 mhz - onepagebook (Team OCX) 19 points - [ inspect ]
Processor: Core 2 E8600 (3.33G... @ 6491mhz [#5 Core 2 E8600 (3.33Ghz) in CPU-Z] on LN2 [ view screenshot ]
Videocard: unknown
Memory: 2048MB DDR3 PC14400 @ 779mhz
Motherboard: asus Rampage Extreme x48
Global Rank: 116th - 15.4 points
Hardware Rank: 5th Core 2 E8600 (3.33Ghz) - 3.6 points
Description: no description
Verfication: verification link
Scan date: 06-08-2008 12:03
Compare url: http://www.hwbot.org/compare.do?resultId=760001
Options: [ report][team][user][ evolution ][ log ]
6 CPU-Z - 6455.14 mhz - c1rcu1tburn3r (XtremeHardware-OC-Team) 17.8 points - [ inspect ]
Processor: Core 2 E8600 (3.33G... @ 6455mhz on LN2 no image
Videocard: unknown
Memory: 1024MB DDR2 PC8500 @ 646mhz CL5.0 5-5-15 2T
Motherboard: EP45-DQ6 p45
Global Rank: 121st - 15.0 points
Hardware Rank: 6th Core 2 E8600 (3.33Ghz) - 2.8 points
Description: E8600 Q820A435 @ 1.85v (-128°C), Gigabyte EP45-DQ6 aircooled, Crucial Ballistix PC8500, Zalman ZM1000W, S3 Virge, , www.xtremehardware.it, Thanks to Gigabyte for this sample
Verfication: verification link
Scan date: 09-08-2008 04:36
Compare url: http://www.hwbot.org/compare.do?resultId=760862
Options: [ report][team][user][ evolution ][ log ]
7 CPU-Z - 6419 mhz - jmax_oc (JMax-Hardware) 2.7 points - [ inspect ]
Processor: Core 2 E8600 (3.33G... @ 6419mhz on LN2 no image
Videocard: unknown
Motherboard: ASUS Rampage Extreme X48
Global Rank: not in top 1000, not ranked yet, or not the best result with this hardware of this user.
Hardware Rank: 7th Core 2 E8600 (3.33Ghz) - 2.7 points
Description: no description
Verfication: verification link
Scan date: 10-08-2008 05:52
Compare url: http://www.hwbot.org/compare.do?resultId=761236
Options: [ report][team][user][ evolution ][ log ]
8 CPU-Z - 6403.61 mhz - HIWA (no team) 2.5 points - [ inspect ]
Processor: Core 2 E8600 (3.33G... @ 6404mhz on LN2 no image
Videocard: unknown
Motherboard: Tpower p45
Global Rank: not in top 1000, not ranked yet, or not the best result with this hardware of this user.
Hardware Rank: 8th Core 2 E8600 (3.33Ghz) - 2.5 points
Description: no description
Verfication: verification link
Scan date: 10-08-2008 12:47
Compare url: http://www.hwbot.org/compare.do?resultId=761023
Options: [ report][user][ evolution ][ log ]
9 CPU-Z - 6403 mhz - MAFRI (HardwareLuxx Germany) 16.6 points - [ inspect ]
Processor: Core 2 E8600 (3.33G... @ 6403mhz on LN2 [ view screenshot ]
Videocard: unknown
Memory: 2048MB DDR3 PC14400 @ 960mhz CL8.0 8-8-28 2T
Motherboard: rampage extreme
Global Rank: 131st - 14.3 points
Hardware Rank: 9th Core 2 E8600 (3.33Ghz) - 2.3 points
Description: no description
Verfication: verification link
Scan date: 10-08-2008 03:41
Compare url: http://www.hwbot.org/compare.do?resultId=761067
Options: [ report][team][user][ evolution ][ log ]
10 CPU-Z - 6371.98 mhz - Qballe (Team OCX) 16.2 points - [ inspect ]
Processor: Core 2 E8600 (3.33G... @ 6372mhz on LN2 no image
Videocard: unknown
Memory: 2048MB DDR2
Motherboard: Biostar Tpower I45 P45
Global Rank: 134th - 14.1 points
Hardware Rank: 10th Core 2 E8600 (3.33Ghz) - 2.1 points
Description: , e8600 ( Q822A435 ) , Biostar Tpower I45 , Teamgroup 9600 , Fx5600 pci , Sirtek 1.2k , Kingblock By Ybris
Verfication: verification link
Scan date: 10-08-2008 12:51
Compare url: http://www.hwbot.org/compare.do?resultId=761025
Options: [ report][team][user][ evolution ][ log ]
If you are not on HWBOT already you should register and post your e8600 clocks. It's fun and all you need is a cpuz validation account. Takes 5 minutes and your scores last forever.
hwbot registration: http://www.hwbot.org/register.do
cpuz validation registration: http://valid.x86-secret.com/register.php
I wouldn't take them over 1.400 Volts loaded, or a distance to Tjmax of less than 20
I would'nt call anything less than 4 hrs prime95 or Orthos stable. Still yet to see this over 4.5Ghz in the thread. SuperPi runs mean Sweet F... All. Whats the point of xtremesystems if its unstable...
fast sp runs mean WR
How's the vdroop on that board? Is there a pencil mod for it?Quote:
Originally Posted by trans am
:eek:what Batch on this madness :D ??Quote:
Originally Posted by \/ENDE][A