EP45-UD3P

Printable View

Show 100 post(s) from this thread on one page

05-05-2009, 06:12 PM
clo007

Quote:

Originally Posted by gergregg

Well finally got my UD3P back from RMA (wouldn't boot dual channel no matter what). Will be setting it up later today and see what I can get out of her.

So you kept the same setup and got the RMA board back and now ti works? I ask b/c my UD3R board has the same dual boot issue.
How long did they have the board for?
05-06-2009, 12:35 AM
tonus

Quote:

Originally Posted by clo007

So you kept the same setup and got the RMA board back and now ti works? I ask b/c my UD3R board has the same dual boot issue.
How long did they have the board for?

Post your bios template with your settings with 1 or 2 sticks of ram.
05-06-2009, 05:55 AM
bluestang

Quote:

Originally Posted by coop

@bluestang, I have only done/tried much, to do Prime @4500. *8hrs. I don't do much besides a Pi run at that high. Q828A618. I did this last night with 1.4v bios.
besides, respect the 32m Pi:worship:

Ok, Coop...Thanks. I have to get of my ass and switch my HD and RAM so I can work on 500-510 FSB x 8.0-8.5 with RAM at 1220-1240. I do alot of photography so the extra spped helps with editing!:clap:
05-06-2009, 06:29 AM
DOM.

Quote:

Originally Posted by EliTE22

thanks

yeah im suck at 555fsb right now with my q9550 :( i think ill try the F9 maybe it will help a little

what are your bios settings for 4700 ?

i been looking to see what i can get out of my X3350 :up:
05-06-2009, 07:31 AM
Eeky NoX

To Radaja, Panging & OC Nub : If you wanna know what's the DDR3 version really gat in terms of potential,

just have a look sometimes on my french thread, I'm hardly workin' on it for now ;)

http://soj.mesdiscussions.net/soj/in...jet_2430_1.htm

I think 600fsb is possible with dualie's...but the PC16000 is hard to go in the specs and I don't know if it comes because of me, the mobo or the D9s :D
05-06-2009, 08:37 AM
gergregg

Quote:

Originally Posted by clo007

So you kept the same setup and got the RMA board back and now ti works? I ask b/c my UD3R board has the same dual boot issue.
How long did they have the board for?

I had just purchased the GB board and was testing on the table when it showed up. I tried 3 different sets of RAM, multiple bios and settings, and it would not boot in dual channel. RMA'd to newegg and had a board back in a couple of weeks round trip. This one worked out of the box.
05-06-2009, 10:18 AM
bt_medic04

just got my UD3P in today. ill be back in a while after i get it installed. btw its a v1.1 if that means anything
05-06-2009, 12:22 PM
fatguy1992

That just means its revision v1.1, which overclocks the same as v1.0, or so I heard.
05-06-2009, 12:27 PM
computerking

I bought EP45-UD3LR and i like it so far ;)

http://i91.photobucket.com/albums/k2.../LoadTest1.jpg

Old test but works ;)

So any more info about that mobo ? any owners ?
05-06-2009, 02:02 PM
bt_medic04

got her up and running. bios is F8, gonna update it to the latest. also whats the normal operating temps for the P45? ET6 is saying 60C :eek: for my NB. i can barely touch the heatsink for more than a second. im going to be putting a fan over it (old 80mm AMD Opty HS fan :p: ) other than that i like this board thus far!
05-06-2009, 05:11 PM
radaja

Quote:

Originally Posted by pangingIII

Hi radaja, thanks.
i use DDR2 one for quite some time just like yourself. i thought DDR3 ram was not expensive anymore, the DDR3 board is just something new that i wanted to try, and as you know, they both are non expensive boards. i can't say i like the DDR3 one more than i like the DDR2's, in fact it took me a while to get used to using the DDR3 one. but now to me, it's easy to use, either one of them, so all i would say i guess is you must try it to really know the difference, but if you like things to be easy to you then stay with DDR2 board.

thanks for the input.yea im not looking for easy,but i remembered when the ddr3 UD3P came out and no one could get very high FSB.but maybe the newer bio's helped?all i know is your doing some awesome clocks with yours.the EP45-Extreme looks great too and the price is decent at newegg right now.:up:
05-06-2009, 05:35 PM
OC Nub

Looked at the Extreme board also radaja, was concerned that getting the Ultra120 to fit may be a problem, also the sata ports may get in the way of larger GFX cards.
05-06-2009, 08:33 PM
EliTE22

Quote:

Originally Posted by Dom7184

what are your bios settings for 4700 ?

i been looking to see what i can get out of my X3350 :up:

heres 4.7ghz, its down the thread i bit, some of the voltages r overkill like mch core, and main thing that helps the high fsb for me is the vtt and mch ref :D u may need for vcore tho;) wasnt that stable
http://www.xtremesystems.org/forums/...d.php?t=211385
also if u look through the first 20-40 (i dont really know where it is up its there some where) of this thread i have settings for 4.6ghz that were very stable, it may also help
05-06-2009, 08:55 PM
XmikeX

Quote:

Originally Posted by pangingIII

.
.
Q9550 @ 525x8.5 4.46 GHz
air-cooled

CPUMARK 99!!!! I thought I was the only one still using that ancient single-threaded thing, as seen on this thread -

http://www.xtremesystems.org/forums/...d.php?t=193665

I only managed a pathetic 588 score .. grr.. HardtoQuad x48 mobo..

:)

XmX
05-06-2009, 09:07 PM
pangingIII

.
.
.
Q9550 @ 525x8.5 4.46 GHz air-cooled. Windows Vista 32-bit.

http://img5.imageshack.us/img5/9859/20090505105206.png

http://img5.imageshack.us/img5/3005/20090505112340.png
.
.
.
Q9550 @ 530x8.5 4.50 GHz air-cooled. Windows Vista 64-bit.

http://img27.imageshack.us/img27/173...0507010604.png

http://img27.imageshack.us/img27/738/20090507014855.png

.
.
05-07-2009, 08:40 AM
kagula323

What do u think about this? :D

Memories are Elpida Patriot Viper 1200 MHZ and they don't want to run lower PL stable ... or is me that doesn't know what to set up in BIOS. I just wish I had some of those great D9 sticks. But I can't find any here in my country :( . I'm from Roumania
http://img412.imageshack.us/img412/9...500mem1200.jpg
EDIT: What do u think I could improve on this OC?
05-07-2009, 11:35 AM
xdan

Great results ,compatriot din pacate ai dreptate greu de gasit D9GKX la noi in Romania.:up: try raport 1:1 and multiplier 7.5*600=4.5GHZ the performance it's even higher.:up:
05-07-2009, 12:12 PM
bluestang

USA people....Micro Center has 3 great deals on Intel CPUs:

E7400 Retail Box $99.99 http://www.microcenter.com/single_pr...uct_id=0301964

E8400 Retail Box $139.99 http://www.microcenter.com/single_pr...uct_id=0299046

Q9400 Retail Box $179.99 http://www.microcenter.com/single_pr...uct_id=0301968
05-07-2009, 02:17 PM
coop

"What do u think about this? "
I think it looks very good. < 1.4v 4500 and 10hrs Orthos. Nice setup and work getting it to run so well.

I got this tonight. 1.45 vcore.

[IMG]http://img24.imageshack.us/img24/7366/49b.jpg[/IMG]
05-07-2009, 08:42 PM
DOM.

coop nice post count 666 lol

wanna trade E8500 i'll put it on my phase :D

what settings did you use for that run ?
05-07-2009, 09:02 PM
coop

Code:

MB Intelligent Tweaker(M.I.T.) Robust Graphics Booster ...............: Auto CPU Clock Ratio .......................: 9 Fine CPU Clock Ratio...................: 0.5 CPU Frequency .........................: 4.902GHz (516X9.5) Clock Chip Control Standard Clock Control CPU Host Clock Control.................: [Enabled] CPU Host Frequency (Mhz) ..............: 516 PCI Express Frequency (Mhz) ...........: 100 C.I.A.2 ...............................: [Disabled] Advanced Clock Control CPU Clock Drive........................: 800 PCI Express Clock Drive................: 1000 CPU Clock Skew (ps)....................: 50ps MCH Clock Skew (ps)....................: 100ps DRAM Performance Control Performance Enhance....................: Turbo Extreme Memory Profile (X.M.P.)........: Disabled (G)MCH Frequency Latch.................: 333MHz System Memory Multiplier ..............: 2.40D Memory Frequency (Mhz) ................: 1238MHz DRAM Timing Selectable ................: Manual Standard Timing Control CAS Latency Time.......................: 5 tRCD ..................................: 5 tRP'...................................: 5 tRAS...................................: 15 Advanced Timing Control Everything In Advanced Timing Control on auto. but tRFC 56 and Drive Strength Profiles OC-1200 DDR Write Training: Disable Motherboard Voltage Control CPU Load-Line Calibration..................: [Disabled] CPU Vcore..............................: 1.45V CPU Termination........................: 1.38V CPU PLL................................: 1.61V CPU Reference..........................: 0.914 MCH/ICH MCH Core...............................: 1.40V Reference..............................: 0.794 MCH/DRAM Ref...........................: 1.12v ICH I/O................................: 1.5V ICH Core...............................: 1.100V DRAM DRAM Voltage...........................: 2.26v DRAM Termination ......................: Auto Channel A Reference....................: Auto Channel B Reference ...................: Auto

I did not notice post count. :devil:
05-07-2009, 09:14 PM
Zucker2k

I'm done with s775 but I can't help but take peeks in here every now and then and I have to say this; this thread may just about hold the most impressive overclocks on the planet. Says a lot about the mobos the thread is dedicated to, but it also says a lot about the overclocking talent in here. Kudos, guys!! Keep up the good work. :up:
05-07-2009, 09:20 PM
gergregg

Looking good so far.

http://i679.photobucket.com/albums/v...gg/Capture.jpg
05-07-2009, 11:32 PM
computerking

Guys Does my UD3LR SUCK ?
05-07-2009, 11:38 PM
fatguy1992

Its Q6600 time again, first go I got 4.32GHz easy :D

http://img10.imageshack.us/img10/1082/wprime32m.jpg

Show 100 post(s) from this thread on one page

** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P

Official Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P