I made a cascade for a friend... I am uploading now only a screenshot and tommorow when i download the pics from my camera i will post them.
http://xs219.xs.to/xs219/07364/pi@5400.JPG
Enjoy!
Printable View
I made a cascade for a friend... I am uploading now only a screenshot and tommorow when i download the pics from my camera i will post them.
http://xs219.xs.to/xs219/07364/pi@5400.JPG
Enjoy!
Wow, is that a record!?:eek: How much you wanna sell that chip for?:D
Amaizing!:clap:
what mobo? awesome temps btw. what us temp under load like pi?
Crazy, Bad Crazy!!
I just ran a 1M super pi on my rig and it finished in a whopping 46seconds.:( :(
lol i just ran my and got 38 lol, but wow by the time he is done i only have 3 calcs done.Quote:
Originally Posted by 2long4u
Very fast Christos :up: I will use your combination ;)
nice :up:
very impressive
wow teaser was the right headline...lets see the set up behind this monster
unseen have you got a shot of the unit
and the specs
your work has always inspaired me to do better
Baz, what does teaser mean :P He will give you those shots in time, after he's made you work for them
Hehe thanks guys for the kind words :)
Well i havent make a cascade for long time. A really good friend who is a really gooddd overclocker asked me if i can make one for him. I said ok but you have to wait! I started collecting the parts in the middle of june. Lets take a look at them:
A really big condeser, a huge fan, alco safety device ,two gauges for high pressure, plate hx in a shoebox with foam , flex hose ~1m
http://xs116.xs.to/xs116/07242/HPIM3293.jpg
http://xs116.xs.to/xs116/07242/HPIM3294.jpg
http://xs116.xs.to/xs116/07242/HPIM3296.jpg
http://xs116.xs.to/xs116/07242/HPIM3299.jpg
http://xs319.xs.to/xs319/07366/HPIM3303.jpg
http://xs319.xs.to/xs319/07366/HPIM3308.jpg
http://xs319.xs.to/xs319/07366/HPIM3309.jpg
http://xs219.xs.to/xs219/07366/HPIM3341.jpg
The compressors i choose are for first stage 18000btu and for second 12000btu. Gases R507 for the first and R1150 for the second.
http://xs319.xs.to/xs319/07366/HPIM3312.jpg
http://xs319.xs.to/xs319/07366/HPIM3313.jpg
The evaporator is a special edition made by eleven. 50mm diameter.
http://xs317.xs.to/xs317/07302/HPIM3332a.jpg
http://xs219.xs.to/xs219/07366/HPIM3339.jpg
http://www.xtremesystems.org/forums/...12#post2327712
Thanks mike for the support!
A big galvanized plate
http://xs219.xs.to/xs219/07366/HPIM3316.jpg
Also a small condeser as desuperheater and an auto oilseparator.
And i started soldering the stuff.
http://xs219.xs.to/xs219/07366/HPIM3318.jpg
http://xs219.xs.to/xs219/07366/HPIM3336.jpg
http://xs219.xs.to/xs219/07366/HPIM3343.jpg
http://xs219.xs.to/xs219/07366/HPIM3350.jpg
My small secret in this cascade is that after many many many many attemps to find the best capillary for 1st stage i finally found it!(I also tried cpev,tev) I used not one but TWO capillaries in parallel. 1,8m x2 0,78 type. I used that cause 1.2 capillary type or 1.5 neither worked ok and with smaller type i had very high pressures. The result is that now i have a very strong first stage and we all know how much important is this. Idle -62c and load -57c to the exit of the hx. High pressure is at load ~14bar at ~25c ambient.
http://xs219.xs.to/xs219/07366/HPIM3356.jpg
Ethylene came after 20 days of waiting :)
http://xs219.xs.to/xs219/07366/HPIM3365.jpg
And i reached -113 :) with 3,55cm of 0,91 capillary type in second stage.
http://xs219.xs.to/xs219/07366/HPIM3375.jpg
I hooked it to my 6850es,p5k-e
http://xs219.xs.to/xs219/07366/HPIM3386.jpg
http://xs219.xs.to/xs219/07366/HPIM3387.jpg
Very good contact. Take a look where i put the thermal probe. It is the yellow cable.
http://xs219.xs.to/xs219/07366/HPIM3396a.jpg
http://xs219.xs.to/xs219/07366/HPIM3397.jpg
Some first results cause i still havent tune it :)
Here at 3600@1,36real idle
http://xs219.xs.to/xs219/07366/HPIM3384.jpg
and here at little load
http://xs219.xs.to/xs219/07366/HPIM3385.jpg
Now i fed my processor with 1,87 and i ran some test at ~5250
here at spi 32m
http://xs219.xs.to/xs219/07366/HPIM3393.jpg
and here at wprime 1024m which uses both cores.
http://xs219.xs.to/xs219/07366/HPIM3391.jpg
hexus
http://xs219.xs.to/xs219/07366/signature.img.jpg
Superpi 1m .
http://xs219.xs.to/xs219/07364/pi@5400a.JPG
max cpuz
http://xs219.xs.to/xs219/07366/5520.JPG
http://xs219.xs.to/xs219/07366/HPIM3399.jpg
http://valid.x86-secret.com/show_oc.php?id=239875
I am waiting the top of the case to finish it. I will update when it is ready.
The color will be a very nice red. It is called "Rocky red" and it is paint for expensive cars. Also i have to insulate many pipes and tune the cascade for quad cores.
Thanks for looking-reading and sorry for my really bad english.
Christos
Really nice, what about first stage temps idle/load?
Regards
Idle -62c and load -57c to the exit of the hx. High pressure is at load ~14bar at ~25c ambient.Quote:
Originally Posted by LittleDevil
Nice but erm
As in 0.78 inches? Thats like 2cm, they don't look that. Is it 0.078? So almost 2mm? If so, wow thats some big capillary. Ever thought of experimenting with 3 or maybe even 4 capillaries?Quote:
TWO capillaries in parallel. 1,8m x2 0,78 type
0,78mm is 0.031 inch
....Quote:
Originally Posted by LittleDevil
Also: Ooooooh I thought you meant 0.78 inches :P That would be overly extremeQuote:
Originally Posted by Unseen
That is some Crazy :banana::banana::banana::banana:.
SUBSCRIBING TO SHOW THIS TO ALL WHO I KNOW
you are crazy!!!! my air-conditioner is 11000btu!!!!
but....
very very very nice work!!! :eek: :up:
i love that condencer its perfect
1.87v it has alot of power to take that your friend must be very happy
Nice and clean looking unit and great performance :up:
What temps do you hope for after tuning? Also, you don't appear to have any subcooling on your 1st stage cap tubes, is there aynthing you could wrap them round? It may help get even lower tempsQuote:
Originally Posted by Unseen
I hope u took into account the amount of power this system will draw and if a standard household circuit can handle this power draw and also that theres usually 2 to 4 wall plugs on a single breaker so anything else thats drawing power from that breaker is gonna add to the total amount the circuit can handle! :stick: :stick:
Clean job :)
But lets see that quad perfomance :up: