Hi all!
So as you see in the title, I'll be doing a rev.1 of my watercooling system. I chose the LL PC-P80 because of its gorgeous size and design.
I'll obviously be modding this case, as it has a lot of possibilities.
I have access to a laser cutter and engraver, so I would like to do a nice design for the side panel, but no ideas as for now!
Computer hardware:
> ASUS P6T6 WS Revolution
> i7 920 @ 4GHz
> Corsair 12Gb 1600MHz CL8
> EVGA (obviously! ) GTX 285 (later an SLI)
> Be Quiet DPP 1200W
> 3 HDD
Watercooling equipment:
> 2x Swiftech MCP-350 w/ Ek topv v2
> 2x TC PA120.3
> EK Supreme plexi CPU block
> EK FC-GTX285 plexi GPU blocks
> TFC red, purple, black and green cooling fluid (still don't know which one I'ma gonna use )
> TFC 10/13 Clear non-UV and white hose
> Koolance 10/13 fittings
> Some Tacens Ventus 120
||| UPDATE 1 |||
my favorite
sorry for the dust
and some sleeving
||| UPDATE 2 |||
polishing of the clamp for the CPU block
||| UPDATE 3 |||
Finally got the case!!!
some pics.... (as always)
...
||| UPDATE 4 |||
dead Dremel....
||| UPDATE 5 |||
rez mounting test (thanks SNiiPE for the idea! )
||| UPDATE 6 |||
aaahhhh!!!!
Don't know how it happened, but the TC isn't straight! I measured like 10 times, and it was all OK, but only after the cut (of course, the action had to be done), I realized the error. Anyway, you don't see it from the side
||| UPDATE 7 |||
||| UPDATE 8 |||
Again a big update
Lightroom
P6T6
Finally Xonar D2X!!!!
||| UPDATE 9 |||
||| UPDATE 10 |||
Only 2 pixes of ma new 45° swiveling Koolance fittings for the moment
||| UPDATE 11 |||
Some pictures of my order from Performance-PCs
Special pix for mib
Thanks for reading!
Bookmarks