Yes plz a list of what you disabled , it will make also my OS faster for sure
I refuse to remove it so by now must have sent 300+ app crash reports to MS.
Installing high end watercooling tomorrow morning
Last edited by Ghigo; 11-28-2008 at 12:36 AM.
can anyone of you confirm that Dual channel is better than tri channel on this mobo for 3d benchies??
TQ
Tested every version for x58 of easytune with every bios from F2 to F4e and nothing changed.
Did also 3 clean installs of vista 64 ultimate with 2 different releases of the dvd , an integrated to october and origianl first sp1 release.
Only hardware that i have that probably other miss is a blue ray/HD dvd burner
Your from down under so I guess sentences works abckwards.
Noted, as you gracefully asked, I went back and checked to make sure what was the proper numbers, and you are right, you shouldnt belive me.
In bios set as 1.425vcore,cpu-z shows with prime running 1.392 and idle 1.408.
Was in a frenzy last day due to my newly arrived waterblock.
Which works tremendously btw.
4670k 4.6ghz 1.22v watercooled CPU/GPU - Asus Z87-A - 290 1155mhz/1250mhz - Kingston Hyper Blu 8gb -crucial 128gb ssd - EyeFunity 5040x1050 120hz - CM atcs840 - Corsair 750w -sennheiser hd600 headphones - Asus essence stx - G400 and steelseries 6v2 -windows 8 Pro 64bit Best OS used - - 9500p 3dmark11 (one of the 26% that isnt confused on xtreme forums)
My multiplier keeps going from 21 to 20 when on full load, what setting in the bios is causing this?
Core i7-920 @ 3,8GHz 24/7 1,30v watercooled
Gigabyte X58 UD5
3x1GB G.Skill DDR3-1333
MSI 7900GTO
Corsair HX520W
Yeah the issue I believe with Easy Tune and Vista 64 is ATI drivers..
Okay my board died from some bios mishap and I can't decide if I should get this board again or go for the P6T Deluxe Gar what do you think you have had both.. More importantly are the temps better on the Gigabyte???
Also I wasn't a big fan of the F4f bios it didn't give you much control over the Vcore it went from like 1.375 to say 1.4375 not really much control...
Last edited by Guacamole; 11-28-2008 at 08:46 AM.
Current:
Asus P6T-Deluxe
Core i-7 920 (do) at 4.2Ghz
6 GB Kingston 2000
Fatality Titanium X-fi
Antec Quattro Pro 1000W
Diamond 5970
Asus 5870 (reference)
MM Duality-EK-Thermochill
The board has dual bios, it shouldnt give out like that, also a new bios is out, F4G
http://www.jzelectronic.de/jz2/board...ze=1&suchwort=
It's not bug with ati drivers cos i tried install easytune before videocard drivers
Installed only chipset ones and after easytune but still no go, miss one piece of the watercooling so cant boot till tomorrow morning /sigh
Maybe is that my vista cds are rather new builds, will try maybe to install a vista no sp1
Last edited by Ghigo; 11-28-2008 at 12:58 PM.
[Review] Core i7 920 & UD5 » Here!! « .....[Review] XFX GTX260 216SP Black Edition » Here!! «
[Review] ASUS HD4870X2 TOP » Here!! « .....[Review] EVGA 750i SLi FTW » Here!! «
[Review] BFG 9800GTX 512MB » Here!! « .....[Review] Geforce 9800GX2 1GB » Here!! «
[Review] EVGA GTX280 1GB GDDR3 » Here!! « .....[Review] Powercolor HD4870 512MB GDDR5 » Here!! «
hi
how manypeople are using the on board sound
have a S B xfi music card which i have not install
is where chaging
now at 195 x20 with cpu @1.325
still waiting for fuzion 1366 back plate
cheers
Coolermaster 700D
Water cooled CPU & graphic card
Thermocill 320 & 240 Rad , DDC ultra pump
I5 2500K L046B582 @4.8
asrock Z77 Extreme 6
4 gig Ripsaw 1600
Corsair C300 128 SSD Boot Drive
Samsung F3 1TG
5870 W/C @ 1000 & 1250
These are my settings for a Prime stable i7 920 system at 200 x 20 with Turbo and HT Enabled.
VCore set to 1.46xx in Bios (VDroop brings it down to 1.408) And I believe I have Loadline Enabled. I'll look to confirm on my Reboot.
QPI/Vtt set to 1.375v
Dram Set to 1.66v
Everything else on Auto.
Nice cpu man, well 3.8ghz for daily use is perfect for me, requires very low voltages and performs great, i have settled at 3.8ghz and will stay here, anymore is just for benchmarks.
Nice overclocking Kensek, what are you using for cooling?
So finally all my parts have been ordered to complete my I7 Rig, hoping that it will arrive by Dec 5th.
My Rig : I7 920 - EX58-UD5 - 6Gb Corsair Dominator 1600Mhz - XFX 8800GTS G92 - CM 850W PSU.
I7 - Batch - Overclocking Sheet
Current Rig Specs :
I7 920 @ (19x205) 3.89 Ghz @ 1.26 Idle & 1.248 Load - Batch 3841A431
Gigabyte UD5 on F5e
Corsair Dominator 3 x 2GB (1600 Mhz)
Evga GTX 260 216 SP
Coolermaster RP-850Watt
WD 500GB SATAII 3.0GBPS
Scythe Mugen 2(Server specs for Online Dating)
http://www.xtremesystems.org/Forums/...d.php?t=209334
The Gig is 4 sale.
I'm using a Swiftech GTZ with a 1366 adaptor sent to me from Gabe himself.
What bios are you using?
I think the Vcore is a little high IMHO what cooling solution are you using?? Also what are your temps over the long term? I ran prime at 5 minute intervals for 3 hours but it would always fail.. How long is prime stable?? Also I see your using XP I can always OC better on XP always I wonder i that would translate to Vista??
Current:
Asus P6T-Deluxe
Core i-7 920 (do) at 4.2Ghz
6 GB Kingston 2000
Fatality Titanium X-fi
Antec Quattro Pro 1000W
Diamond 5970
Asus 5870 (reference)
MM Duality-EK-Thermochill
Bios is F4c. The board can run BClk up to 196-197 at 1.36v. But then to go higher requires voltage increases in leaps and bounds.
Intel has published, and it is in the 100+ page booklet that comes in the i7 retail box, that the i7 can safely go to 1.55v.
I've also ran an Asus' P6T and a R2E.
Last edited by Guacamole; 11-29-2008 at 08:16 PM.
Current:
Asus P6T-Deluxe
Core i-7 920 (do) at 4.2Ghz
6 GB Kingston 2000
Fatality Titanium X-fi
Antec Quattro Pro 1000W
Diamond 5970
Asus 5870 (reference)
MM Duality-EK-Thermochill
Bookmarks