@Crysis_gamer - thanks for that reply. I've been thinking next time around I should just change the wire colors themselves, but how do you keep track of all the different wires if they are all the same color? Also, are you building extensions for people, or are they the sleeving straight from the PSU?
I've always wondered about extensions as it seems more practical without needing to mod the PSU, but then what do you do with the massive cabling from the PSU, like where do you hide that? It seems the most efficient way is to mod directly the PSU, but then that raises another issue - if you custom length the PSU, what do you do later when you switch cases ? Get a new PSU? Or just do it all over again?
They say the definition of madness is doing the same thing and expecting a different result.
Howlin' Pelle Almqvist
Project Log Completed: all internal v1000
Not all the mouse, keyboard are in the middle small connector
sometimes need to unsolder wires directly to the plate Here begins the stairs because not everyone wants to do it
@The Viking spin the mouse, keyboard and see if the ends are plug-ins if you have a plug that can be easily dismantled to facilitate sleeve
5D II |14 2.8 |Σ 35 1.4|You Dont Need Telescope
Flickr
Nice
5D II |14 2.8 |Σ 35 1.4|You Dont Need Telescope
Flickr
We need some purple heatshrink for that beautiful purple sleeving
purple sleeving this should become standard not special i love it
proud to be from Belguim ^^
Lightpainting and hardware are my life!
They say the definition of madness is doing the same thing and expecting a different result.
Howlin' Pelle Almqvist
Project Log Completed: all internal v1000
-------------------------------
Not From Concentrate
All Projects
Previous Projects:
S3 Mini ITX Chassis
The ArK
Uriel
Israfel
Veritas
Eldritch
Nice shots Janik
8pin for 3dchipset:
Enjoy
Regards,
Martin Simpson
I'm loving it... :-)
Glad to hear it!
Regards,
Martin Simpson
Regards,
Martin Simpson
nice
proud to be from Belguim ^^
Lightpainting and hardware are my life!
Excellent guide, I totally screwed up my first psu lol, after applying the heatshrink i couldnt put the cables back in.. grrrr
Another thing I find funny is AMD/Intel would snipe any of our Moms on a grocery run if it meant good quarterly results, and you are forever whining about what feser did?
Im on the verge of ordering a sleeving kit from MDPC (going for a red, black, with a hint of grey theme) to match the ASUS IV Formula.
Cant wait to have a crack at sleeving, hope it goes well as i only settle for perfection. fingers crossed.
With help, I will eventually build a PC. Hopefully.
-------------------------------
Not From Concentrate
All Projects
Previous Projects:
S3 Mini ITX Chassis
The ArK
Uriel
Israfel
Veritas
Eldritch
Janik: Really nice pics! The purple is growing on me
Regards,
Martin Simpson
Bookmarks