Ok i'm tearing down my tri-loop system for a full clean out (due to dye buildup)
While it's down i'm changing out my masterkleer 7/16 tubing for tygon r3400 3/8 5/8 tubing.Using straight distilled no dye this time.
Ok i'm contemplating getting a 120.3 taking 1 loop out, running 2 loop and putting my q6600 @ 3.6 1.48v on it as well as my gtx (A 120.3 can handle both these components well?) I will be using the same fans (which are scythe kaze ultras 2000rpm 88cfm)
Keeping my nb sb and vrm's on the mcr120.Ok now i need help planning how i will be routing the 2 loops
I was thinking doing something similar to rockfordfosgate pictured here:
But using my ddc 3.2 instead of the d5.Thinking a way to get it mounted on the bottom section front bit where the 120mm fan sits.
Maybe i can whip up a bracket of some sort. I will have to move the psu high to get the 120.3 down there so i will need to move hd's in there current location.I could put them back in the drive bays or maybe above the radiator in the bottom section.
I'm favoring the hd location above the rad apposed to the drive bays.I would like to keep my drive bays spare for other things.
here's a better pic to show what i want to do
Taking the one res out giving me 3 free drive bays...
using the top 2 for a alphacool lcd having a spare one underneath that for whatever i may get maybe a multiswitch.Then the 2 res's,dvd burner and then fan controller.
what do you rekon guys? ideas? anything i should do differently?
cheers
Bookmarks