anyone with a newer Conroe batch please post your Overclock, voltage under load and batch please
anyone with a newer Conroe batch please post your Overclock, voltage under load and batch please
newer batches have been bad for me, other people have had good ones, but most are bad.
So, from when is it called a new batch? a little more specific plz
Intel core i7 920 @ 3.5GHz undervolted
Scythe Mugen II
[RAID0] 2x Intel X-25M 80GB Postville
Gigabyte X58 UD4P
9GB DDR3 1333MHz
EVGA 670GTX 2GB
Lian Li v2010b
Antec Truepower Quattro 850Watt
MacBook Pro 13" 2013
iPad Air
Well I don`t know anything over 35 maybe .. my brother`s 32 is good but I do not know when they started getting worse
E6600 L636A229:
3.5GHz @ 1.413V ORTHOS 10h+ @ 52ºC.
3.6GHz @ 1.47V ORTHOS 8h+ @ 58ºC.
Watercooling.
vCore measured with DMM.
You were not supposed to see this.
E6600 L644G280
3.8ghz @ 1.60 (Vdroop) 51c
4.0ghz @ 1.70 (vdroop) not stable at all
think maximum is somewhere between 3.8 - 3.9 ghz
all is on watercooling, i will by a Striker board soon and will see how it works on that, with some more vcore!
Intel i7 920@ ???| Inno3D 8800GT OC Edition | 3x1 Corsair 1600 DHX | DFI UT-X58 | TT ToughPower 850W
Watercooling: D-Tek FuZion V2, DDC Ultra Plexi top, PA120.3, MCW60, Ek's Res.
Infa,
I assume that 51ºC @ 3.8ghz 1.6v is an idle temp?
You were not supposed to see this.
my new E6300 is pretty bad. cant really get more than 2.91
Rig:
Q6600
Intel BadAxe2
Tuniq 120 Tower
G.Skill HZ 4x1GB
BFG 7900 GS OC (558/675) now MSI HD 7770
WD Raptor 150GB (Primary)
2 x Seagate 320Gb 7200.10 (Storage; No RAID)
Corsair 620Watt
Samsung SH-W183 SATA drive
AuzenTech X-Meridian
Antec A900 Case
I have a Tuniq 120 Tower in my new pc. The size, in relation to others on the market, is directly proportional to the size of my penis. Therefore it is large.
and thick.
That's very impressive temps you got there.
What's your ambient?
You using Coretemp or what for the temp readings?
You were not supposed to see this.
The "G" batches seem to be very good
SB Rig:
| CPU: 2600K (L040B313T) | Cooling: H100 with 2x AP29 | Motherboard: Asrock P67 Extreme4 Gen3
| RAM: 8GB Corsair Vengeance 1866 | Video: MSI gtx570 TF III
| SSD: Crucial M4 128GB fw009 | HDDs: 2x GP 2TB, 2x Samsung F4 2TB
| Audio: Cantatis Overture & Denon D7000 headphones | Case: Lian-Li T60 bench table
| PSU: Seasonic X650 | Display: Samsung 2693HM 25,5"
| OS: Windows7 Ultimate x64 SP1
+Fanless Music Rig: | E5200 @0.9V
+General surfing PC on sale | E8400 @4Ghz
You must be running in 10c ambient and have ice water in your loop for those temps with 1.6 vcore.
Main Rig
i7 2600k l Asus P8P67 l 2x2gb Gskill l GTS450 l Venomous X l XClio 680
[XC] 4X4N,
OR he's using an inaccurate temp monitor software.
You were not supposed to see this.
nah 1.6v 50c load seems right on the spot with good watercooling gear.
Im running 1.655v and idle around 36/40 core1/core2 (coretemp or intel tat)
with load @ 55-58c this with fairly low ambients though 19-20c running dual sp2004 blend prio 9 or 100% load with intel tat for 12hours+
wc gear in sig
Q6600 | P35 DQ6 | 4x1GB Ballistix8500 | 8800GT 512 | PC P & P 750w | WC Mcp655, D-tek Fuzion, Maze 4, Bip3 |
E6600 | Abit AB9 QuadGT | 3x1GB D9GMH | 7900GTO | Silverstone Zeus 850W | Aircooled |
E2160 | Giga 965 Ds3 | 3x1GB D9HNL | 7600GS Silent |Seasonic s12 600w | Aircooled |
Last edited by mascaras; 04-14-2007 at 12:21 PM.
[Review] Core i7 920 & UD5 » Here!! « .....[Review] XFX GTX260 216SP Black Edition » Here!! «
[Review] ASUS HD4870X2 TOP » Here!! « .....[Review] EVGA 750i SLi FTW » Here!! «
[Review] BFG 9800GTX 512MB » Here!! « .....[Review] Geforce 9800GX2 1GB » Here!! «
[Review] EVGA GTX280 1GB GDDR3 » Here!! « .....[Review] Powercolor HD4870 512MB GDDR5 » Here!! «
largon vcore.dk has the d-tek fuzion a little closer to where you live = ) about 100$ though
Q6600 | P35 DQ6 | 4x1GB Ballistix8500 | 8800GT 512 | PC P & P 750w | WC Mcp655, D-tek Fuzion, Maze 4, Bip3 |
E6600 | Abit AB9 QuadGT | 3x1GB D9GMH | 7900GTO | Silverstone Zeus 850W | Aircooled |
E2160 | Giga 965 Ds3 | 3x1GB D9HNL | 7600GS Silent |Seasonic s12 600w | Aircooled |
L64F040 SL9ZL Malay from newegg about 2 weeks old
about 3.2ghz max with 1.5v vcore (ty)
I broke the good e6600 in my sig while removing the IHS, just got this, 7638A760 and it does 3600 at 1.46vcore (bios). temps are good, idles 25 deg and 40 load
Water cooled TJ-07
PA 120.3 + BlackIce extreme 3 2*DCC rev2
fuzion
Striker Extreme
E6600 L629 B365
2*7900gtx
I recently bought a xeon 3060 . The batch number if i recall right is 7640A .
I really had a hard time finding a stable OC . and with stable i mean stable .
Lots of times i've seen orthos small fft crash after 12 -16h or more .
I can post at very high frequencies (3.9ghz) with a 'passive' cooled scythe ninja . The cpu never reboots or blue screens and almost always posts . but to get it orthos stable is just not possible and requires crazy voltages .
I'm now at 3290mhz (470x7) with 1.4 in bios . (1.329 load)
the board is a DS3 rev 3.3 .
anyway , to get like lets say 100-200mhz more out of it , i have to up voltage to 1.5 in bios . and even then it will error after 15+ hours orthos .
really hard to find a stable freq .
my E6300 L629B was alot easier and did 3430 mhz with 1.475 in bios (1.39 load). when it wasn't stable it would just blue screen/reboot or not post at all .
Main rig 1: Corsair Carbide 400R 4x120mm Papst 4412GL - 1x120mm Noctua NF-12P -!- PC Power&Cooling Silencer MK III 750W Semi-Passive PSU -!- Gigabyte Z97X-UD5H -!- Intel i7 4790K -!- Swiftech H220 pull 2x Papst 4412 F/2GP -!- 4x4gb Crucial Ballistix Tactical 1866Mhz CAS9 1.5V (D9PFJ) -!- 1Tb Samsung 840 EVO SSD -!- AMD RX 480 to come -!- Windows 10 pro x64 -!- Samsung S27A850D 27" + Samsung 2443BW 24" -!- Sennheiser HD590 -!- Logitech G19 -!- Microsoft Sidewinder Mouse -!- Fragpedal -!- Eaton Ellipse MAX 1500 UPS .
yeeep, iam having good gear, look at my sign.
and no , not faulty monitoring programs, iam using Coretemp 0.95 (latest)
and TAT and everest, tat is showing a TAD bit higher temps, but also lower LOAD temps, soo iam just trusting coretemp. and idle is at TOTAL idle 20c, and surfing and usual use its about 25.
my ambient is 20c soo .. and its lapped, dont think it did so much..but anyway cant hurt
but i want to get higher, can boot and load windows at 4ghz, but it needs more vcore! and p5b is not giving any more than 1.7....soo striker is coming up!
Regards
Intel i7 920@ ???| Inno3D 8800GT OC Edition | 3x1 Corsair 1600 DHX | DFI UT-X58 | TT ToughPower 850W
Watercooling: D-Tek FuZion V2, DDC Ultra Plexi top, PA120.3, MCW60, Ek's Res.
Wow, very nice temps and overclock Infa. It would be amazing if you could hit over 4.0 on the Striker with your setup.
Hmm.. I got a week 32 chip, so I don't know.. :P
Hasn't Intel made any in 2007? If they have made E6600 chips will the stepping then be L7xxx?
Bookmarks