[Build Log] Schuhart's Jar

http://i51.tinypic.com/2mnm80g.jpg

Alright guys. This is my first build log, so be gentle. :D



Name:
I adopted this seemingly strange name, Schuhart's Jar, after I came aross the name in a book entitled Roadside Picnic / Tale of the Troika. If you are familiar, you'll soon see why. If not, I'll give a little background.
This short novel is the inspiration for the game, Stalker: Shadow of Chernobyl. Why I picked the name specifically is I've decided to do all copper fittings. The "jar" in the book is solid copper. If you want to know more, just go read the book. :up:

Parts:
CPU: i7 2600K
Motherboard: ASRock Extreme4
Memory: G.Skill DDR3 2x2gb 2133mhz or G.Skill DDR3 2x4gb 1600mhz
Video Cards: MSI N570GTX Twin Frozr III Power Edition/OC
SSD: Samsung 470 256gb
Case: Silverstone FT02BW
PSU: Corsair HX850W

Watercooling:
CPU Block: Aqua Computer Cuplex Kryos HF
Pump: MCP 655
Radiator: XSPC RX320
Fans: Scythe Gentle Typhoon 1850RPM
Resevior: Koolance RP-452X2
Fittings: Alphacool Copper
Tubing: 10' of Masterleeker 7/16" ID / 5/8" OD

Here's the first two items I bought for the build which have arrived. One all the way from Canada!

I didn't pay $370 for the CPU, don't worry. ;)

More importantly, what's in the box?
http://i52.tinypic.com/2co4zyf.jpg

And here's what I've been searching for all over the US and ended up ordering all the way from Canada! Very fast shipping from Daz Mode! :up:
http://i55.tinypic.com/1htr2q.jpg

Here's an upclose shot of the CPU Block. That's a LOT of copper. This is a heavy block!
http://i53.tinypic.com/1jqp7q.jpg


Please forgive my poor photography skills, rather, lack thereof. I really need a DSLR. Point and Shoot doesn't cut it in low light conditions.


Edit:

Here's a picture of everything I have so far.
http://i51.tinypic.com/1179vzp.jpg

I'm going to post a few pics of the block itself. Some will go in the parts section (unless they kick me out for horrible photography :D)
http://i52.tinypic.com/am9oyd.jpg
http://i51.tinypic.com/mb07c9.jpg
http://i56.tinypic.com/332yyhz.jpg

Here's the block disassembled.
http://i53.tinypic.com/juua0p.jpg

The next four pictures are for anyone out there wondering about the O-ring. This block comes with two, a normal and thick ring.

The normal ring is on the left, thick ring on the left. Notice the texture differences between the two.
http://i54.tinypic.com/mmaa8g.jpg'

Another shot showing the thickness of the rings:
http://i51.tinypic.com/9fwqi0.jpg

I forgot to take shots of the original O-Ring, but it sits flat.

Here's two shots of the Thick O-Ring. As you can see, it obviously sticks up out of the valley in which it resides.
http://i56.tinypic.com/fxv7nr.jpg
http://i52.tinypic.com/2hyz9yc.jpg

New parts come in tomorrow!

Reserved 4

Game imho is too different to be related to book. Imho closer to book's mood is Andrei Tarkovsky's '79 movie Stalker. (vid for some taste of it). For anybody who haven't seen it or read brothers Strugatsky book Roadside Picknick - i strongly advise to do so. A bit deeper then average pop/consumerism culture products.

Where did Dazmode ship from? Curious where their warehouse is?

Quote:

---

Originally Posted by churchy

Game imho is too different to be related to book. Imho closer to book's mood is Andrei Tarkovsky's '79 movie Stalker. (vid for some taste of it). For anybody who haven't seen it or read brothers Strugatsky book Roadside Picknick - i strongly advise to do so. A bit deeper then average pop/consumerism culture products.

---

I agree. This book is extremely different, although you'll say, "AH-HA!" when you come across a concept in the book that was used in the game.

No one wants to wander around "The Zone" without kill something, right? :D

Quote:

---

Originally Posted by Kenjiwing

Where did Dazmode ship from? Curious where their warehouse is?

---

Oakville, Ontario, Canada.

I ordered last Tuesday. Opted for 2 Week delivery. Recieved it today. I'm just out of New Orleans, Lousiana, so that's fairly far to ship something. I'm impressed w/ the speed considering it was delivered via USPS. :up:

Honestly, I tried NOT to buy from him since I didn't want to import and "wait" a long time. There just isn't anyone in the US right now stocking this cooler for 1155 sockets. AM3 is easy to find though.

Shipping wasn't nice ($11 or $12) and his price was a tad higher, but it arrived very quickly.

Some stuff is priced very affordably, but other items are $25 or more expensive than where I can find stuff in the US.

He seems to get stuff you can't find, including some frozenq rads I had been eyeing for a while.

I'd order from the guy again, especially for a niche product. :up:

You must have really wanted that block if you were willing to buy from Canada. Dazmode FTW though.

Quote:

---

Originally Posted by lowfat

You must have really wanted that block if you were willing to buy from Canada. Dazmode FTW though.

---

Everyone has an EK. It's a basic, square block. So boring to me. Heatkiller is not top dog anymore either. I wanted something somewhat unique. I don't see many of these around here, or anywhere else.

The more I look at the block, the more I like it. I have 0 buyers remorse. :up:

Quote:

---

Originally Posted by [XC] Synthetickiller

.. No one wants to wander around "The Zone" without kill something, right? :D ..

---

Actually many had initially expected for it to be less of an FPS, more of survival rpg, as in ten times less NPCs & shootouts, but more area to explore (and preferably one big stich-less map), more anomalies, more realism.
As for what's close to book .. i'd count that as less then 5%. Few arcade way simplicised anomalies and "happiness for everyone, for free" in one of endings doesn't make it close to book. Game had it's pros too (and i still like it a lot :)) as bringing enjoyable to play fallout-ish post-apocalyptic setting with great immersion and good plot, also featuring lot of small details that are easily recognizable by and easily pulls in nostalgia post-soviet-union citizens (fireplace stories, level design, overall feel), but like book it was not.
P.S.
If you like the game, i suggest you to try out AKM mod (sleeping with sleeping bag, dynamic anomalies, offline AI, artifact transmutation, and so on), greatly changing gaming experience in this particular one.
P.P.S.
sorry for sidetracking from your build itself. It's just that i like book, movie, game, so i wished to share some of that when i noticed references to them :)

Case arrived today. Fed Ex usually gets stuff out in the morning which is really nice.

Boy this is a HUGE box!
http://i53.tinypic.com/24yp76h.jpg

So here's another picture of everything I currently have, including my PSU.
http://i51.tinypic.com/2zyhlhv.jpg

PSU & Radiator w/ stock fans.
http://i55.tinypic.com/a3ccg2.jpg

USB 2.0? This is 2011. I'll fix this...
http://i54.tinypic.com/117tw1k.jpg
http://i56.tinypic.com/14l1xyx.jpg
http://i56.tinypic.com/297o04.jpg

DB Drive won't fit in the top slot. I knew this, but wanted to confirm. ALMOST fits!
http://i52.tinypic.com/35an21u.jpg
http://i51.tinypic.com/29mb0xu.jpg

I'll have to do something about this ugly grey housing the DB player has. :D

I got the board today. I'm really impressed w/ the quality of this ASRock board.

http://i52.tinypic.com/117z2px.jpg

I've never had a board packaged as securely as this. I didn't plan on taking a picture of htis, but I was just astounded they'd go so far to protect the board.
http://oi53.tinypic.com/2vv9yjr.jpg



So here's the USB 3.0 bracket. It's 3.5". I'm now having an issue w/ how to attach the header. The two headers are held together with a waxy substance. I've read it'll melt off. I'm trying to figure out how to mount these guys to that pcb after desodering the USB 2.0 connections. :shrug:

If anyone has any ideas, I''d be more than happy to hear from you guys. I'm still new to this. :D

http://i53.tinypic.com/9lh5xh.jpg
http://i56.tinypic.com/2n6t6ad.jpg




Here's two pics of the board in case. There's exaclty 10" of space between the rad and the top of the case. This set up would let me isntall my two cards in SLI, but I'll be ripping out the two fans and running 3 120s in their place.
http://i51.tinypic.com/2ylkx9u.jpg
http://i55.tinypic.com/2ziaqkx.jpg

Why not move disk enclosure to 5.25 bays, rip all the 180mm fans and put 4x120 rad down there? (IIRC there was one FT02 build with even 4x140 rad in it, don't remember how much moding that required though)

There's a few builds like that. I've seen with both 480 and 560 rads. It would rock, but for now, I can't really buy another rad. It's more than enough for a CPU alone and I can't justify the cost. The GPUs will stay on air.

You're refering to this build:
http://www.xtremesystems.org/forums/...d.php?t=266579
And this buid:
http://www.xtremesystems.org/forums/...1&postcount=58

So far, I only plan on mounting one SSD on the side, so I don't need the 3.5" bays, but tearing it out won't buy me a lot of extra air flow. I might also buy some drives, so I'd rather keep it there for future expandability.

The USB 3.0 issue is bugging me right now.

Update:
More updates:
http://i55.tinypic.com/2cq1kc1.jpg
http://i52.tinypic.com/2dhv2nr.jpg
http://i55.tinypic.com/2uzz98g.jpg
http://i52.tinypic.com/vwfoh.jpg
http://i54.tinypic.com/331zixf.jpg
http://i56.tinypic.com/15n6q6t.jpg
http://i55.tinypic.com/25euwqb.jpg

So this should be the final loop.

A few things:

The alphacool copper fittings are amazing. They are closer to rose gold than copper. Pictures do not do them justice.

I'll be adding a copper SB to go along w/ the copper theme. I wanted a TT true spirit or some other elaborate sink, but anything tall will interfere with SLI. I'm stuck w/ a shorter block.

The Koolance res is absolutely beautiful, but I'm finding it impossibly hard to bleed. The remaining air in the loop doesn't bleed. I can prime the pump for and hour, on and off, but the air stays put and the pump will not find silence.

I have some other pics, but I can't find the memory card. :rolleyes:

I'll post those when I come across it.

glad to see you putting it together :D looks good.

i have HK block and love it.but i love that kryos block more!

THanks buddy.

I wish I was doing some incredible stuff, but I don't have the time/skill like a lot of the other guys on here.

I've never seen an FT02 w/ WCing behind the board so cards are easily installed. The panel should fit fine. I'll just have to do wire management, but that's fairly easy.



So I pulled my GTX 470 and put it in the case before creating the loop. I wanted to see what fans will fit...
http://i54.tinypic.com/2h4bbd5.jpg
http://i51.tinypic.com/1255oh0.jpg
http://i54.tinypic.com/112d8o3.jpg

I'll probably go with the GT 1850s as they quieter, but it's nice to know I can throw a few San Ace fans on there if I feel like it.

Too bad I can't do push pull with those 38mm beasts. :rofl::ROTF:

i like seeing normal builds.

all these crazy builds make me sad. as i will never have the money.. or the time to do said crazy builds.

i like seeing normal builds.

all these crazy builds make me sad. as i will never have the money.. or the time to do said crazy builds.

Well, my 2600k seems to be a bust.

The first thread stays at 100% due to interups (not sure if it's hardware or software, but most likely software as it does this w/o drivers installed). I'll have to deal w/ getting it replaced unless it's the motherboard. Either way, this set's my build back.

I'll be posting a few pics tomorrow. I have some new stuff I can install in the PC anyways. :up:

The board is being RMA'd as I'm 99.99% sure there's something wrong with it.

I installed a fan controller, but I want to do some cable management first. Also, the radiator grill I bought won't fit, so I'm looking into getting at least another one or 3 single ones.

If anyone need a Phobya radiator mount (looks to fit 120mm or 140mm rad) let me know!

Small update...

A few surprises in store either by Friday or Monday. Depends on how fast UPS is. :up:

Subscribed

I'm keeping my EYE on you....
lol

I'm keeping my EYE on you....
lol

Tinypic has been giving me hell. I have no idea how to use flicker to simply link to a picture.


Anyways.... ASRock p67 Extreme4 is RMA'd.... Here's what I'm replacing it with:
http://i56.tinypic.com/i1init.jpg


Sorry for the pic size guys. Tinypic fails about 95% of the time when I upload a file. I'm not resizing lol. Anyways, the board is amazing. I'm running 4.9ghz (still have to figure out how to get 5ghz stable). I'll need to find another project to use my Extreme4 for.


I also wanted to post a pic of the I/O shield plate; it's insulated!
http://i54.tinypic.com/2vsls0y.jpg




I'll take some more pics when I have a chance. I should be getting my new video cards this week, so I'll post pics then. I don't feel like moving the rig back and forth for pics since it's running.

http://imageshack.us/
copy/paste "forum link"

Update!

Got a few new things in!
http://img690.imageshack.us/img690/598/p1010564mw.jpg

Uploaded with ImageShack.us

TWO GTX 570 Twin Frozr III and Samsung 64gb SSD (for another project).

Alright, so I have the cards in, but the 3way sli bridge will not work in the configuration I want:
http://farm6.static.flickr.com/5265/...7d9d0a85_b.jpg

This is what I actually wanted to do:
http://farm3.static.flickr.com/2176/...64eb74c8_b.jpg


The first card was hitting 102C in Metro 2033. I need 1 slot worth of space. I'll be ordering an SLI bridge tonight. :rolleyes:

I also purchased a lampron touch. I absolutely love this thing. I wanted the Aquaero x5, but for my needs, I just wanted to control fan speed. I have big fingers and this touch screen is super easy to use and fast. :up:
http://farm4.static.flickr.com/3397/...534121b4_b.jpg

I also have more work to do. There's no cable management so far, so I'll have to spend an hour or two tidying it up:
http://farm6.static.flickr.com/5148/...0b424f30_b.jpg

Don't know if it's lights, but tubing seems looking bad / not too clear. Maybe it's worth to use some colored one eg. black? And do you have to use those 90deg fittings on res? Some pre-bent with hot water and spring tubing won't work there?

Yeah, the masterleeker tubing is not super clear. I wasn't sure what to get. I needed 16/10mm tubing and it was easier to order this stuff.

I just wanted to shiny copper finish throughout. I just think it looks nicer. I might end up replacing the tubing, but not anytime soon. I really don't feel like breaking the loop down. Bleeding the res was a real pain.

Can you recommened any good tubing? Tygon perhaps?

WC the vga cards too bro :>

Quote:

---

Originally Posted by [XC] Synthetickiller

Yeah, the masterleeker tubing is not super clear. I wasn't sure what to get. I needed 16/10mm tubing and it was easier to order this stuff.

I just wanted to shiny copper finish throughout. I just think it looks nicer. I might end up replacing the tubing, but not anytime soon. I really don't feel like breaking the loop down. Bleeding the res was a real pain.

Can you recommened any good tubing? Tygon perhaps?

---

All clear tubing will cloud up.
I'd say use black or maybe white tubing to bring out the shiny copper :up:

Quote:

---

Originally Posted by hillywav

WC the vga cards too bro :>

---

I'd like to, but not enough money. I can't justify spending really anymore. I made one last big purchase and that's basically all I can spend, lol. I actually wanted these cards to be on air.

Maybe I'll do WCing cards next time... the cost is just so high. :(

Quote:

---

Originally Posted by schoolslave

All clear tubing will cloud up.
I'd say use black or maybe white tubing to bring out the shiny copper :up:

---

The white would look nice, although it wouldn't fit with the theme of the board (black and red). The ASRock would look sweet w/ white tubing though.

Maybe I'll use nano XP to make the water milky white? That has crossed my mind a few times.

universal VGA kinda cheap today.. come on :D lol

Here's the reason I didn't WC the cards. I wanted to spend my money here instead!
http://farm6.static.flickr.com/5143/...89742307_b.jpg


I need to organize my desk better,but its ok for now. Fitting two 30" monsters is difficult. I may wallmount them when all is said and done.

I need to do some wire management and maybe get some dye, not sure yet.

Quote:

---

Originally Posted by [XC] Synthetickiller

Here's the reason I didn't WC the cards. I wanted to spend my money here instead!

---

very smart. Beer and milk is important

It's actually NO-Xplode w/ water. :p:

That's good beer though. I had a bottle of Krostrizer, but I drank that, so had to bring out my second fav.

http://farm4.static.flickr.com/3551/...aacdd409_b.jpg

Here's a little wire management I finally got around to doing. Not the best, but never claimed to be! :p:

http://i54.tinypic.com/2cwtmow.jpg
(I did plug in that other moxel after taking the shot, don't worry.)

Here's a shot of the inside. Almost done. I need to paint the Bluray drive.
http://i56.tinypic.com/2ir7tw7.jpg

That extra moxel went to my now half dead Lamptron FC Touch. RMAing tomorrow.

I finally finished the build. I'll be taking a few pics later to show you how it looks.

I was also thinking of buying some dye for the water. I am not sure if I even should bother or what type. The white milk looking nano fluid XP was on my mind. I just don't know yet.

and we are still waiting them.... lol

I finally got around to taking pics.

I also decided to weigh the case. I knew it was heavy. The cause is not easy to carry, despite having a hole in the back. It weighs 57.8 lbs, about 25.25 kg!

Here's what you've been waiting for:
http://i54.tinypic.com/24l4o6b.jpg
http://i54.tinypic.com/n6cd9d.jpg
http://i54.tinypic.com/1z2jgb8.jpg

Here's my helper, who's usually behind the scenes.
http://i51.tinypic.com/r1y490.jpg

I have no idea how she can sit on the portch all day. It's well over 100F out there!

Well, that's it, project over. Well, not quite. I am considering adding dye to the loop. Still not sure.

Have a happy 4th of July everyone!

Nice build dude :). Rad at the bottom looks a tight fit!


Know what you mean about the dye - you need to do something to hide the discoloured tube. Everything else matches in really well. Looks almost stock :up:

Nice build dude :). Rad at the bottom looks a tight fit!


Know what you mean about the dye - you need to do something to hide the discoloured tube. Everything else matches in really well. Looks almost stock :up:

I lucked out with the blue cables matching the blue SLI bridges. I figured I have 2, why not use both!?

That's masterleeker tubing. Don't buy that. I can't believe they even sell it. Oh well.

I'm still thinking white nano fluid XP as it should really stop any cloudy look. A translucent dye might just look as bad. :shrug:

How about use some of that braid and sleeve the tubing? May fit in quite well with your build too.

I use Masterkleer black/uv blue and the plasticiser literally pours out of it. XSPC tubing (only used UV orange but theyre likely all the same) has been the best ive used for low leeching.

looks good bro!
if your gona get new tube just get the primoflex. its awesome and mine stayed clear for more than a year. untill i tore down to upgrade :up:

I've been benching my rig. Finally maxed it out w/ safe settings.

3DMark11 Performance: 12511

I'm beating 1366 hexcores w/ dual 5970s. :up:

http://hwbot.org/submission/2187156_...70_12511_marks