-
Celeron 430 @ 3ghz vs FX-57 @ 3160mhz , the new Celeron rocks
-
What would you say are the effects of DDR2 and P35 verses the FX-57 system?
At any rate nice performance for a $54 chip on the stock cooler verses $400+ chip (if you can find it) on water cooling.
-
the P35 is not fast as i975X or 680i but Gigabyte/Celly will beat DFI/FX-57 in games and compressions.
what to say? the old A64 needs more clock and AMD needs Phenom :)
Quote:
At any rate nice performance for a $54 chip on the stock cooler verses $400+ chip (if you can find it) on water cooling.
sry, i edited the post ,its not only water is water + ice
-
well, a conroe's a conroe, isn't it?
;)
thanks for the comparison.
-
So the new celerons are really good.
Thanks
-
my friend that celeron is just begging for extreme cooling.. bring on the LN2.
-
Thanks for sharing PcCI2iminal. :up:
You're as always "The Man" for us "budget clockers" with all your comprehensive testing of cheap iron. :)
One 440 ordered today.. <hnngg>. :D
PS.
Who would think a little over a year ago that a "celly" would whoup "FX ass". :)
-
Tried fsb wall on this?
I will get celly 420 today with 8x multi
-
Quote:
Originally Posted by
TL1000S
PS.
Who would think a little over a year ago that a "celly" would whoup "FX ass". :)
Those would have been fighting words back then. :D
-
Quote:
Originally Posted by
kiwi
Tried fsb wall on this?
I will get celly 420 today with 8x multi
here my friend
i got it on air a week ago
http://img378.imageshack.us/img378/4...y395fsbob3.jpg
http://img355.imageshack.us/img355/2...40cellyqj0.jpg
and today i was trying to get better scores under dry ice and i got only 399FSB on DFI RD600 :mad:
Quote:
my friend that celeron is just begging for extreme cooling.. bring on the LN2.
not that celly ,but i will try with a new one(420 or 440)
-
Quote:
Originally Posted by
TL1000S
Thanks for sharing PcCI2iminal. :up:
You're as always "The Man" for us "budget clockers" with all your comprehensive testing of cheap iron. :)
One 440 ordered today.. <hnngg>. :D
PS.
Who would think a little over a year ago that a "celly" would whoup "FX ass". :)
thx ;)
i like Celeron ,they are very funny on air and very cheap
and now they are so powerful hehehe
Quote:
Who would think a little over a year ago that a "celly" would whoup "FX ass"
:rofl:
-
Still very nice for a cheap chip, it is enough on air :) My 420 does 8x340 so far all stock. I am also testing new Asrock 1333 mobo but 945 is not so good for oc since I have to raise PCI-E freq > 120. But some user got it up to 420fsb. Need ATA HDD or PCI sata card :)
-
Ordering one of these now. I can't resist. With my Biostar P35 board coming tomorrow, this comes to $165 for the combo. Amazing!
-Collin-
-
Of course a conroe is a conroe, but a Celeron compared to a e6320 for example is no much.
The 3ghz on here is nothing compared to a PROPER conroe.
-
I'm pretty sure this thing can do A LOT more than 3.0ghz. It's a single core, probably runs WAY cooler, has less cache...that spells a dang good OC. While the performance obviously won't match a "real" conroe, I think this thing will be an absolute blast to play with.
This little chip has no idea what's about to hit it :)
-Collin-
-
I have a 430 incoming too, will post results here soon! :)
Are this new celerons based on a real single-core design, or maybe just one core or something disabled?
-
Quote:
Originally Posted by
funkflix
I have a 430 incoming too, will post results here soon! :)
Are this new celerons based on a real single-core design, or maybe just one core or something disabled?
I was going to ask the same thing. Seems like it would be more trouble than it's worth for Intel to completely design a Celeron from the ground up like that. Maybe it's a dual core with one core disabled? That would be a first.
-Collin-
-
Are those celerons (430,440) supported by chipsets such as 915P and the 925X? After all they only use a single core, very much like the celeron Ds.
Sorry for the OT D-:
-
Quote:
Originally Posted by
Zzzz
Are those celerons (430,440) supported by chipsets such as 915P and the 925X?
Sorry for the OT D-:
I doubt it, as they use the architecture of the core 2 duos. Hmm, then again, it's not a chipset limitation, but a limitation of the motherboard power regulation. I think any core 2 duo board will support these, but nothing else. I don't think the two chipsets you mentioned will though. A few generations too old.
-Collin-
-
Recieved my stuff today! I just install windows atm, results later. :)
http://www.abload.de/img/celi4n2.jpg
http://www.abload.de/img/testxpu.jpg
-
If they could hit 550FSB these could be fun chips, just throw 2 volts at them for the hell of it :D
-
muahahaha ordered my self a 440 celly yesterday.. im so gonna torture the living bejesus out of that chip.. i hope to hit over 3.1ghz with water. wish me luck ;)
-
woot, at least some fun stuff happening!!! way to go guys! :up: waiting on some results :clap:
-
Yeah, I think that is really cool to that with the new Celerons like that, but beating an FX-57, wow. I find it interesting how similar the overclockable Celerons of today compare with the OCable Cellys of yesteryear. Compare this Celeron the to the Tualatin Celerons of five years ago:
Both P6 Core Based
Both have half the Cache of their Pentium Counterpart (Either PIII-S or E2xxx)
Both of them have massive OC potential
Both of them when OCed beat out CPUs that nobody thought they would (Pentium4(A), FX-57)
Both of them were a tremendous value in their day.
Tualatin Celeron Overclock: http://valid.x86-secret.com/show_oc?id=166913
-
Some results:
Prime -
3000MHz stock Vcore
3300MHz ~ 1.37V
SuperPI 1M -
3420MHz 1.43V 19.861s
It seems that this CPU has a FSB limitation at ~ 385MHz, can't reach 35xxMHz.
-
Quote:
Originally Posted by
funkflix
Some results:
Prime -
3000MHz stock Vcore
3300MHz ~ 1.37V
SuperPI 1M -
3420MHz 1.43V 19.861s
It seems that this CPU has a FSB limitation at ~ 385MHz, can't reach 35xxMHz.
this screen is with P5K Vanilla
and i used the Intel cooler box and 1.45v
http://img386.imageshack.us/img386/4...430cpuzic6.jpg
http://valid.x86-secret.com/show_oc?id=210218
-
Are those Ballistix Fatbodies? I wonder if my problems with P5K are a result of using my Fatbodies?!
-
-
any one can change the multiplier ?
then my P5B Dlx seems can't good manage the CPU Vcore :confused:
i just can get this :
http://valid.x86-secret.com/show_oc.php?id=210648
http://valid.x86-secret.com/cache/210648.png
stock aircooled, vcore limited 1.68-1.7v :/
-
Imho fixed multiplier.
What batch u have and how high can u clock for some SPi stuff?
-
Quote:
Originally Posted by
funkflix
Imho fixed multiplier.
What batch u have and how high can u clock for some SPi stuff?
Q650A475
http://maxicrash.free.fr/Celery%2044...%2019.203s.PNG
1.74v : (over 1.74v my vmod = linked to ground :/ really bad vcore managment )
http://valid.x86-secret.com/show_oc.php?id=210662
http://valid.x86-secret.com/cache/210662.png
-
Nice CPU u got there! :toast:
Show us some better cooling with it. ;)
-
Quote:
Originally Posted by
funkflix
Nice CPU u got there! :toast:
Show us some better cooling with it. ;)
2 stage started :D
-
Quote:
Originally Posted by
overcrash86
2 stage started :D
:D
Hmm no way to get any higher here.. 9 x 387.0 stable, 9 x 387.7 instant freeze...
-
Quote:
Originally Posted by
funkflix
Are those Ballistix Fatbodies? I wonder if my problems with P5K are a result of using my Fatbodies?!
Micron D9G :)
and nice OC you got there ,temps on load?
-
-
Quote:
Originally Posted by
overcrash86
wow!!!! 4ghz on air is very impressive
congrats
give us some hughe scores :)
EDIT :rofl:
Quote:
Originally Posted by
overcrash86
sick!!!
-
it does work cooling less too :D
http://maxicrash.free.fr/Celery%2044...%20(Large).jpg
http://maxicrash.free.fr/Celery%2044...%20(Large).jpg
no FSB Wall for the moment, just vcore needed :/
any other guys got same problem with P5B Dlx ?
http://maxicrash.free.fr/Celery%2044...%2017.343s.PNG
i can boot at 4.6Ghz, but reboot or blue screen arrived to desktop during validation :/
-
damn overcrash86 now i REALLY cant wait for my 440 celeron to arrive.. :D
-
overcrash86
1.How is idle/load temp @ 4570MHz??
2.How is performance? its E6700? :d
-
Quote:
Originally Posted by
HamidFULL
overcrash86
2.How is performance? its E6700? :d
I don't think that idea comparing dualcore vs singlecore would be any good. Otherwise in superpi it should be about as fast as E6700.
Celeron are always great clockers because of less cache, less heat and this seems to be great chip for budget gaming system.
-
Quote:
Originally Posted by
HamidFULL
overcrash86
1.How is idle/load temp @ 4570MHz??
2.How is performance? its E6700? :d
around -106 idle and -104 load :D
never bench my E6700@4570Mhz ;) 5G+ only :) so is it for sale (the E6700)
-
Quote:
Originally Posted by
overcrash86
around -106 idle and -104 load :D
What!!?? 106C or 106F???
please tell me in C :confused: :confused:
How I can find one?
Quote:
Originally Posted by
Kasparz
I don't think that idea comparing dualcore vs singlecore would be any good. Otherwise in superpi it should be about as fast as E6700.
Celeron are always great clockers because of less cache, less heat and this seems to be great chip for budget gaming system.
you are right
-
Quote:
Originally Posted by
HamidFULL
What!!?? 106C or 106F???
please tell me in C :confused: :confused:
How I can find one?
you are right
°C of course
what find ? 2 stage cascade or celery 440 ? :)
-
wait a minute you have ran it so high without any hsf? OMG :D
-
Quote:
Originally Posted by
overcrash86
°C of course
what find ? 2 stage cascade or celery 440 ? :)
WOW! :shocked: 106C!!!!
When CPU will die?
I want celery 440 :cool:
-
Quote:
Originally Posted by
HamidFULL
WOW! :shocked: 106C!!!!
When CPU will die?
I want celery 440 :cool:
:rofl:
not to confuse my cooling less and my test under 2 stage cascade...
-106°C under 2 stage cascade ;) (evap temp)
cooling less it was around 80°C idle and 100°C full (core temp)
-
Quote:
Originally Posted by
overcrash86
it does work cooling less too :D
those Cellys are amazing :)
Quote:
no FSB Wall for the moment, just vcore needed :/
any other guys got same problem with P5B Dlx ?
more vcore on air will no help me :( (P5K and P35-DQ6)
i will try with Commando and RD600
and congrats
Quote:
Originally Posted by
overcrash86
around -106 idle and -104 load :D
never bench my E6700@4570Mhz ;) 5G+ only :) so is it for sale (the E6700)
hows your E6700 does on air?FSB?
i got a new E6700 52B yesterday -> 546FSB on air and 540 for benching
http://img171.imageshack.us/img171/1...stleitudg2.jpg
-
Quote:
Originally Posted by
Solarfall
damn overcrash86 now i REALLY cant wait for my 440 celeron to arrive.. :D
sweet
and share your scores plz ;)
-
celery cooling was really useless :rofl:
Duron 700 put on CPU + AMD fan
-
Quote:
Originally Posted by
PcCI2iminal
sweet
and share your scores plz ;)
i plan to... but it's gonna be with it with water or air. later on with icy water when i get another board..unfortunately not 2 stage rotary's here... well not yet anyways. :D
-
Quote:
Originally Posted by
overcrash86
:rofl:
not to confuse my cooling less and my test under 2 stage cascade...
-106°C under 2 stage cascade ;) (evap temp)
cooling less it was around 80°C idle and 100°C full (core temp)
i dont get it, cooling less means no hsf on top of your proc at all? and you got 80-100c? am i right?
-
Nice celeron there PC:toast:
Heres yonah celeron 420ES (from VW's awesome collection of early conroe/yonah) with DI and MM's Alumi pot...Evap. temp. idle @-72C and load won't budge @-69C
http://img485.imageshack.us/img485/3...shot1141jz.jpg
http://img485.imageshack.us/img485/8...shot1163vz.jpg
Not bad for Celeron:) ....Just need better ram..
http://img205.imageshack.us/img205/6182/1cely21yv.jpg
http://img155.imageshack.us/img155/6...shot1186hq.jpg
-
Solarfall, i'll be joining you on that 440 ;) Will be ordering mine this week sometime although i might have to look at getting a new mobo as well inorder to get anything decent done with it... :p: :p: :p: (and then the saga begins :D)
-
so how does the celeron affect performance in encoding and games ? some quicktest maybe ??
-
Dumo
very nice :)
Celeron M Yonah = respect
PS.i like any kind of Celly
-
Quote:
Originally Posted by
zerotol
so how does the celeron affect performance in encoding and games ? some quicktest maybe ??
i`m waiting for a new 440 and i will share some real games :)
-
Guys remeber celeron 300-366Mhz oced to 550Mhz ?
Thats all the same now
Old days.. :-D
-
-
insane Cellys heheheh
Pt1t
mobo?
-
Quote:
Originally Posted by
PcCI2iminal
insane Cellys heheheh
Pt1t
mobo?
P35 DQ6
-
Asus p5b, Celeron 420, Patriot 1 gb 800mhz, cant get over 320 fsb, can anyone help me.
Thanks
-
I got a Conroe-L ES 2.8GHz 1MB a couple months ago and what I noticed that it clocks very well one some boards and on other boards not good at all. I have no idea if thats a general problem for the Conroe Celerons or if the ES is troublesome.
On a Asus P5B-E Plus (same as P5B Deluxe) I hit a FSB wall at exaclty 266MHz on all multipliers from 6 to 14. Furthermore, voltage was wrong all the time. Setting something like 1.6V in bios resulted in 1.38V measured. On a Abit Quad GT I could not boot using that CPU for whatever reason.
Then I tried a Gigabyte 680i board and its behavior was completely different. FSB wall at 410Mhz and completely stable vcore. It was rockstable for running WCG (folding app) at 1.4375V set in bios with 3550MHz. Max I tested on air was 1m stable at 3910Mhz with 1.575V set in bios.
Unfortunately I only had the 680i board for a few days. After that I wanted to try to test the CPU on watercooling on a Asus P5W DH Deluxe and guess what, it was making trouble again. Vcore was very very unstable. Setting 1.45V in bios resulted in a Vcore between 1.3-1.5V. With other CPUs on the same board, its stable within +-0.01V. It overclocked like crap, which I think is because of the fluctuating Vcore. I will test the CPU on P35 as soon as I have a board.
Maybe Intel fixed some of those issues, but could not complete fix them, which might explain different behavior on different chipsets with the Celerons.
-
Quote:
Originally Posted by
Fr3ak
I got a Conroe-L ES 2.8GHz 1MB a couple months ago and what I noticed that it clocks very well one some boards and on other boards not good at all. I have no idea if thats a general problem for the Conroe Celerons or if the ES is troublesome.
On a Asus P5B-E Plus (same as P5B Deluxe) I hit a FSB wall at exaclty 266MHz on all multipliers from 6 to 14. Furthermore, voltage was wrong all the time. Setting something like 1.6V in bios resulted in 1.38V measured. On a Abit Quad GT I could not boot using that CPU for whatever reason.
Then I tried a Gigabyte 680i board and its behavior was completely different. FSB wall at 410Mhz and completely stable vcore. It was rockstable for running WCG (folding app) at 1.4375V set in bios with 3550MHz. Max I tested on air was 1m stable at 3910Mhz with 1.575V set in bios.
Unfortunately I only had the 680i board for a few days. After that I wanted to try to test the CPU on watercooling on a Asus P5W DH Deluxe and guess what, it was making trouble again. Vcore was very very unstable. Setting 1.45V in bios resulted in a Vcore between 1.3-1.5V. With other CPUs on the same board, its stable within +-0.01V. It overclocked like crap, which I think is because of the fluctuating Vcore. I will test the CPU on P35 as soon as I have a board.
Maybe Intel fixed some of those issues, but could not complete fix them, which might explain different behavior on different chipsets with the Celerons.
i got same problem with my P5B Dlx :
http://maxicrash.free.fr/Celery%20440/P5BD_Vcore_2.avi
asus known it ...
hope soon BIOS issue ;)
PS : Beta Bios 1205 doesn't solve this problem...
-
Do I need a vcore mod for my P5B. I really want to try the 1333 mod and see what happens. But where can I find some conductive paint.
Thanks
-
Quote:
Originally Posted by
Fr3ak
I got a Conroe-L ES 2.8GHz 1MB a couple months ago and what I noticed that it clocks very well one some boards and on other boards not good at all. I have no idea if thats a general problem for the Conroe Celerons or if the ES is troublesome.
On a Asus P5B-E Plus (same as P5B Deluxe) I hit a FSB wall at exaclty 266MHz on all multipliers from 6 to 14. Furthermore, voltage was wrong all the time. Setting something like 1.6V in bios resulted in 1.38V measured. On a Abit Quad GT I could not boot using that CPU for whatever reason.
Then I tried a Gigabyte 680i board and its behavior was completely different. FSB wall at 410Mhz and completely stable vcore. It was rockstable for running WCG (folding app) at 1.4375V set in bios with 3550MHz. Max I tested on air was 1m stable at 3910Mhz with 1.575V set in bios.
Unfortunately I only had the 680i board for a few days. After that I wanted to try to test the CPU on watercooling on a Asus P5W DH Deluxe and guess what, it was making trouble again. Vcore was very very unstable. Setting 1.45V in bios resulted in a Vcore between 1.3-1.5V. With other CPUs on the same board, its stable within +-0.01V. It overclocked like crap, which I think is because of the fluctuating Vcore. I will test the CPU on P35 as soon as I have a board.
Maybe Intel fixed some of those issues, but could not complete fix them, which might explain different behavior on different chipsets with the Celerons.
good to know about that issue,i just have tested on P35 and the new Celly flies on Bearlake
i will test my Celly on R600 and i will share all the results with you guys :)
R600 is not friendly with Celeron D ->top FSB is around 225
and i hope it works well with the new Celly
-
Quote:
Originally Posted by
overcrash86
thx for that video
-
Im confused. I switched my ram to Buffalo. Now I am able to boot at 390. Vcore 1.375. With the patriot ram max boot is 345. But the patriot is able to run at 880 at 1.9b when fsb is 340.
I wish I could go to 400. Someone clear my ram confusion.
Thanks
-
Here are my results with a 440:
Various CPUs around 3 GHz:
http://www.cons.org/cracauer/crabenc...leron.user.png.
Note that I only run it at 3.0 GHz there but it does 3.4 easily so far and I didn't have time to drive it up yet. Not bad for $66.
Celeron 440
SL9XL MALA
0651A368
-
I added a second stick of the buffalo (2x1gig) and now I get the bluescreen alot. I also put a fan ontop of the ram, the is certified for ddr800 at 4-4-4, I tried 5-5-5.
Thanks
-
-
Can someone please help me clock my celeron more, I need it for seti.
Thanks
-
Quote:
Originally Posted by
uOpt
Here are my results with a 440:
[url=http://www.cons.org/cracauer/crabench/core2celeron.user.html]Various CPUs around 3 GHz:
Note that I only run it at 3.0 GHz there but it does 3.4 easily so far and I didn't have time to drive it up yet. Not bad for $66.
Celeron 440
SL9XL MALA
0651A368
nice work :D
here my new 440 on air ->Intel cooler box (E6700)
http://img204.imageshack.us/img204/4...lyrd600bg1.jpg
this is not prime stable but i can play games for hours without any error :D
Quote:
Can someone please help me clock my celeron more, I need it for seti.
Thanks
elec999
try to use 1:1
-
Celeron 430?
Haven't they used that name before? For a Yonah, irrc.
-
nicely done PcCI2iminal those clocks remind me of my 440 there very similar.. how high can you you overclock that 440 that you have ???
the best that i was able to do was 3.8ghz with water... well you probably remember it ;)
next week planing to use some dry ice to cool the sucker down :D
-
Quote:
Originally Posted by
wwwww
Celeron 430?
Haven't they used that name before? For a Yonah, irrc.
there was a single core Merom based Celeron M 430 (and 420 and such)
-
Quote:
Originally Posted by
wwwww
Celeron 430?
Haven't they used that name before? For a Yonah, irrc.
Intel needs to find better names for the futures chips
http://img227.imageshack.us/img227/7...soquete7rg.jpg
http://www.xtremesystems.org/forums/...ad.php?t=97306
Quote:
the best that i was able to do was 3.8ghz with water... well you probably remember it
i remember well :)
mine does 4ghz on P5K-E
Quote:
next week planing to use some dry ice to cool the sucker down
more insane cellys hehehe
good luck ;)
-
My 440 seems to be FSB limited, not clockspeed limited. In two boards I can do 330-340x10 but then no post, even with the CPU multi to the minimum (x6).
Is there any known cure for this?
-
Anyone know if there any modded bios for Asus p5b to change the multi.
Thanks
-
Quote:
Originally Posted by
elec999
Anyone know if there any modded bios for Asus p5b to change the multi.
Thanks
im pretty sure that it cant be done cos Celeron doesnt Support intel speedstep/EIST
-
Quote:
Originally Posted by
Solarfall
im pretty sure that it cant be done cos Celeron doesnt Support intel speedstep/EIST
I can change the multiplier on my Celeron 440. 6-10. DS3.
-
Quote:
Originally Posted by
uOpt
I can change the multiplier on my Celeron 440. 6-10. DS3.
WHAT !!!!! seriously... when i had my celeron 440 on evga mobo there was no option that allowed me to change multiplier.. maybe thats a p35 thing or something.. actually just installing windows to a asus p5k deluxe.. have to check out is it possible with it...
-
Quote:
Originally Posted by
Solarfall
WHAT !!!!! seriously... when i had my celeron 440 on evga mobo there was no option that allowed me to change multiplier.. maybe thats a p35 thing or something.. actually just installing windows to a asus p5k deluxe.. have to check out is it possible with it...
Sorry, mixed up the boards. I can change it on th Asus P5W DH, I don't think I could on the DS3.
-
Quote:
Originally Posted by
overcrash86
problem solved with 1215 Beta BIOS :D
soon result under cascade + 1.9-2v :up:
-
eae criminal, me da uma luz ? :D
sei q eh meio off, mas tipo:
to com uma p5b deluxe e um 6400 nela...com umas kingston 667 micron d9hnl .... entao consigo estavel 8x400 com 1.462v (no windows) de vcore e memos @800 5-5-5-15....
consegui a muito custo colocar @8x425...mas tive q subir muito as voltagens... (nb@1.65 e fsb@1.45 , vcore@1.502 no windows) ...e mesmo assim congela na hora em aplicativos 3D... falta subir mais voltagem correto?...e vc saberia me dizer quais os limites seguros pras voltagens no dia-a-dia?? pq mesmo aki no XS ninguem parece saber...pq eu e outros ja perguntamos la no topico oficial da mobo e ninguem respondeu
-
Quote:
Originally Posted by
miesso
eae criminal, me da uma luz ? :D
sei q eh meio off, mas tipo:
to com uma p5b deluxe e um 6400 nela...com umas kingston 667 micron d9hnl .... entao consigo estavel 8x400 com 1.462v (no windows) de vcore e memos @800 5-5-5-15....
consegui a muito custo colocar @8x425...mas tive q subir muito as voltagens... (nb@1.45 e fsb@1.65 , vcore@1.502 no windows) ...e mesmo assim congela na hora em aplicativos 3D... falta subir mais voltagem correto?...e vc saberia me dizer quais os limites seguros pras voltagens no dia-a-dia?? pq mesmo aki no XS ninguem parece saber...pq eu e outros ja perguntamos la no topico oficial da mobo e ninguem respondeu
Eae criminal, me of the a light?
I know q eh half off, but kind:
It to you with a p5b deluxe and a 6400 in him. ..com some kingston 667 micron d9hnl.... entao with himself estavel 8x400 with 1.462v (in the windows) of vcore and memos @800 5-5-5-15...
I obtained to a lot cost put @8x425...mas I had q go up a lot the voltages... (nb@1.45 and fsb@1.65, vcore@1.502 in the windows) ...e even so freezes at the right moment in application 3D.. absence go up more correct voltage? ...e vc would know say me which the dependable limits pras voltages in the dia-a-dia?? pq same aki in the XS ninguem looks to know. ..pq I and others ja we ask her in the topico official of the mobo and ninguem answered
Translated from P to E.:D English please at XS.
-
Quote:
Originally Posted by
dogsx2
Eae criminal, me of the a light?
I know q eh half off, but kind:
It to you with a p5b deluxe and a 6400 in him. ..com some kingston 667 micron d9hnl.... entao with himself estavel 8x400 with 1.462v (in the windows) of vcore and memos @800 5-5-5-15...
I obtained to a lot cost put @8x425...mas I had q go up a lot the voltages... (nb@1.45 and fsb@1.65, vcore@1.502 in the windows) ...e even so freezes at the right moment in application 3D.. absence go up more correct voltage? ...e vc would know say me which the dependable limits pras voltages in the dia-a-dia?? pq same aki in the XS ninguem looks to know. ..pq I and others ja we ask her in the topico official of the mobo and ninguem answered
Translated from P to E.:D English please at XS.
lol....the translator u've used did not translate some words...:P
translated:
hi criminal, can u give me a hand?
i know it's off topic, but:
i have a p5b deluxe with an e6400 and 2gb kingston 667 (w/ chips micron d9hnl) and i can reach 8x400 with vcore = 1.462v (reported by everest in windows) and the memory @800 5-5-5-15
it was a hard duty, but i could finally reach 8x425, but to do so i had to increase the voltages a lot (nb@1.65, fsb@1.45, vcore@1.502 - windows) and even tough the system freezes under 3D applications...
i need to increase the voltages, right? and would u know what the safe limits for the voltages for 24/7 use? me and other users have asked it on p5b's topic but no one has answered.
-
-
Quote:
Originally Posted by
dogsx2
dia-a-dia = 24/7 :rofl:
lol...online translators suck
-
I had orthos run for 1 hour without fails.
Dunno if the temp sensor in this CPU is borked, my E6600 idled at 25C (stock) with the same cooler... this one idles at 43C at 1600MHz (stock).
http://img216.imageshack.us/img216/4...eron420wu7.png
-
Quote:
Originally Posted by
KMEI
I had orthos run for 1 hour without fails.
Dunno if the temp sensor in this CPU is borked, my E6600 idled at 25C (stock) with the same cooler... this one idles at 43C at 1600MHz (stock).
[/IMG]
Very nice, I think I will get one of these for a HTPC now rather than a 2140... dual loop water cooling system in a Lian Li G50. They seem to have a very low heat output so a single 120.1 should be plenty :D
-
i got a 420 and it wont clock higher than 2.4ghz. no matter what volts i guess my board sucks. refurbed msi p6n.
-
I have a 420 and the best I can do is 400x8 (3.2GHz)
I have tried al the way up to 1.5v and it just won't do greater than 405 stable.
It only needs 1.35v for 3.2GHz on air (AC Freezer 7 Pro which sits at 42c full load)
Fsb wall?
I am using a GA-P35-DS3L.
And my Multiplier option is LOCKED!
