Printable View
http://www.nowpug.com/bbs/data/pc_cpu/fsfgg.jpg
http://www.nowpug.com/bbs/data/pc_cpu/529alpa5555.jpg
http://www.nowpug.com/bbs/view.php?i...esc=asc&no=159
yesterday, in Korea the Abit QUAD GT has been retailed.
so, I have tested it with E6300 on WaterChiller.
then I got this result.
though I didn't get any latency or Super Pi result.
but it's gorgeous. isn't it?
I'll try to transplant Crypton something. :bounce:
great job! wish my IN9 could to that!
nice nice! I'm anxiously awaiting Abit's new BIOS....
Oh~! :woot:
Excellent results. ;)
Give me cpu & Quad GT :D
Thank you ^^, maybe the master piece has been revived...
and I added the Pi & Latency shots...
yep!~Quote:
Originally Posted by LexLuther
great!
Good shot
what's ram test?
and, CPU, RAM how V?
Adata 8500 PE GMH 6XD22 right.Quote:
Originally Posted by Scretfeeling
and voltages are 1.565 Vcore on 3.8G, 2.55v 4-4-4-12 Trfc 20 Trrd 1 on 1086Mhz.
hope so your represent. :toast:
excellent result LexLuther - may I ask are you still using the stock cooler on the NB ?
Great run! Some extra cooling for nortbridge ro you did it on stock?
No, sirQuote:
Originally Posted by Johnny Bravo
Stock Heatsink is good, but I prefer the WaterChiller cooling ^^;
so, I'm using Koolance Water Blocks at all.
stock heat sink has some problem like a P5BD & ICFX3200.
they have a roof something. it does disturb the natural air circulation.
crab... :slapass:
Excellent job there, congtats !
What's safe boot fsb for max ss fsb(543MHz)?
As you knew, ^^; that is a limited thing...and unstable..Quote:
Originally Posted by Dekara
so, I tested super-pi on FSB 529.
You don't understand me:) , off course it's not stable at 543 fsb or 529 fsb but I want ask what is the boot fsb ;) ?Quote:
Originally Posted by LexLuther
is that clockgened or bios?
Clockgen and setfsb don't work with QuadGT, fully support is waiting for :( .Quote:
Originally Posted by VIctorj
There's abit guru OC software which is not "userfriendly" for oc like setfsb or clockgen.
543fsb....hey, they stole my mobo:D
Only got this mobo for two days, max bench is 535fsb.
Norz my old friend ;) I see u have manage to launch abit to atmosphere :D , can u tell me 32M Spi can you do it on 535 also?
:toast:
http://www.nowpug.com/bbs/data/pc_cpu/gg553.jpg
this is the FSB info
http://www.nowpug.com/bbs/data/pc_cpu/529piff.jpg
and this is the advanced PI result on 3.7G
4-4-3-4 Trfc 30 the others is normal setting.
what can I do for you ?
that's it. Crypton is also Great :bounce:
every FSB I posted is based on bios setting.Quote:
Originally Posted by Dekara
I don't use uGURU or Clockgen something.
....lol... I try for you my friend:D , but its tricky, only got this mobo for two days, no mods yet. When i can manage 550fsb on this Abit, its LN2 action.Quote:
Originally Posted by Misko82
There is a few vmods i have to do first, boot to win on 500fsb, then uguru up from there. Cooling is the key here, and lots of volt of course. Thik i need 2.0+vmch for higher fsb (550fsb+)
EDIT: Pic of spi32M@530fsb, 535 was no go. Will try later.
---cheers---
Hoho that's great result :clap:, congrats !!!
Give us vcore, vmch and cooling type(still water?).
:toast:
Threads Merged.
no need to post every single incremental OC you do.
its nice and all, but no need to post every increment OC you do, with a whole new post.
yeah what vmch? also if you could, what's max you can get with 1.55v?
Guy(s), what voltages are you using to hit 540fsb? I have the same board and am wondering what settings to use. A list of all voltages would be greatly appreciated. Also, which BIOS you are using would be helpful :D
10x my friend :clap: very good result, I see yours xeon is also very good ;) hope to see u soon on ln2 :)Quote:
Originally Posted by Norz
:toast:
vCore is up to just CPU. I had knew that GT need some more voltage because the 1066 strap give more Load than 1333 strap.Quote:
Originally Posted by Dekara
but it's not.
My vcore is 1.425v on 3.7. and 1.495v on FSB 553
vMCH is always 1.7v.
under vMch 1.7v, Could not start to XP. Cooling is also WaterChiller. temp -2 cellcious.
Though it is hard to belive and apply this, it is useless to be suspicious.Quote:
Originally Posted by Norz
and though somebody do not believe this, but I'm Ok.
just only the time after My Mobo had been working like this.
;) Be positive sir.
Great job!! Lex.
Go Go a higher fsb!!!
I want to see a sub-ramtiming.
Thank you very much for advice. ^^ very helpful.Quote:
Originally Posted by Kunaak
and the process is right.:)
on FSB 553,Quote:
Originally Posted by Burn
vcore : 1.495v
vdimm : 2.625v
vFsb : 1.5v
vmch : 1.7v
vICH : 1.2v
vICHIO : 1.7v actually everything is max value except vcore and vdimm.
and nothing moded.
ram timing is 4-4-4-12 trfc 30 and the others is basis on Mobo default.
No memset useing. just posting windows. Chiller setted to -2 cellcious.
and I ran Super pi on FSB 529, eventhough higher FSB is possible. for compare my older pi record on P5BD at same setting.
that's all.
and I added My Mobo Pic.
http://www.nowpug.com/bbs/data/pc_sys/070316_0002.jpg
you can see CPU, North Bridge & Heatsink and active cooling for Digital PWM.
http://www.nowpug.com/bbs/data/pc_sys/070316_0003.jpg
and you can see also North Bridge & South Bridge included My Cute X600 with VF-900 Cu.
http://www.nowpug.com/bbs/data2/pc_sys/070316_0004.jpg
finally, this is my WaterChiller contained Koolance Coolant and Hydo 40W inline/underwater Pump.
is this on 1333 strap guys or is Abit also using 1067 strap up to 400MHz FSB
what about RAM dividers how do they function
how high can you clock the RAM
nice boards
dinos, it's 1066 strap. no 1333 on abit qgt currently :)
QUAD GT is working only 533/800/1066 straps.Quote:
Originally Posted by dinos22
but there is "by CPU", too.
If the Cpu based onFSB1333 be retailed, or mod something Default FSB of CPU, then it maybe work on 1333Strap. but nobody knows that, yet.
thank a lot Ziddey ;)Quote:
Originally Posted by ziddey
memory frequency divider is 1 by 1. just Sync.Quote:
Originally Posted by dinos22
th memory frequency is 1106 on DDR2. right? yes.
http://www.nowpug.com/bbs/data/pc_cp.../540QuadGT.jpg
Super PI shot added on FSB 540 with E6300.
I Hope that Faster than Coolarer's with Infinity P965 :bounce:
congtats
nice FSB
:clap:
Awesome FSB :toast:
Temperatures on CPU&Nb are still -2C, and vmch also still 1.7V?
yes :) on that setting this is very stable.Quote:
Originally Posted by Misko
it does need max vMCH on 1066 strap high FSB.
I'm setting up windows server 2003 for advanced Pi value now :rolleyes:
10x for info :toast: , what do u think about max fsb for 32M run? Can u lower multi (if u can not change multi in BIOS with yours CPU, u can change it in win with crystalCPUID) on CPU and try 545, if it can't pass with default one? It would be very interesting info for me
how high can you OC the RAM on 4:5 and 2:3 ratios with CAS4 and CAS5
http://www.nowpug.com/bbs/data/pc_cpu/540nn.jpg
Now I added FSB 540 with E6300 renewal.
memset info and CPUZ memory info has been evaporated. I don't know. ^^;
so I tell you, 4-4-4-3-5 3-23-2-10-9-2-8-4 on memset.
almost near to coolarer's Infinity 965P.
but now My OS is still XP SP2, so I have tuned something.
If I have some stable condition on SERVER2003, then I'll let you see better result. thankyou.
and I have no 6400 or 6600 C2D, so I can't let you know 2:3 or 4:5 setting on High Clock,
If you want to know 2:3 or 4:5 result on Low Clocks, then I'll show you that.
have a nice day. buddies. :bounce:
uncheck lock mchbar and see if it helps. you'd need to do that first time around though before it vanishes.
I'm liking this board more and more....but I'm with Dinos: how well does it clock memory on 4:5 and 2:3 for you (cas 4, mostly)?
Also, how well does the 800 strap clock for you?
Thank you Ziddey ^^ very helpful I'l' try to do it on next time.Quote:
Originally Posted by ziddey
thanks again~
My Memory is not so good now...Quote:
Originally Posted by Vapor
so I want to test for you say, too.
but I'm not ready to do it.
I'm searching what is the nice memory.
sooner I try to do it you said. thank you for your concern.
that is not importantQuote:
Originally Posted by LexLuther
what is important is that 4:5 and 2:3 clock the RAM similar.............since you have done 540MHz with RAM with decent timings you should be able to do those clocks and better with those ratios
reason i ask for CAS5 as well is to see whether the board can manage really high MHz but if your RAM isn't capable it doesn't matter
i found out that the RAM subtimings on this board are not available through bios which is a real shame :slapass: >>> knowing Abit it will take a long time if ever for them to listen to end users and introduce things like that in the bios :(
Virtually its only shortcoming. :-/Quote:
Originally Posted by dinos22
not sure i understand the message here :confused:Quote:
Originally Posted by Gautam
What I mean is, the board's performance is excellent, and it does great 4:5, seems like they got just about everything put together, but not having secondary timings in BIOS completely gets in the way of letting it let memory stretch its legs. i.e. its a major flaw, but about its only one. No, I don't have one, and that's the reason why.
ah ok i actually just re-read your post again and see exactly what you mean.....not sure why i needed clarification;.....sorry about my brain fart there hehQuote:
Originally Posted by Gautam
hopefully abit can get that sorted out........................:(
i just have a negative view of Abit's bios teams since the AN8 Ultra days :(
OK, dearQuote:
Originally Posted by dinos22
I'll try to :bounce:
Impressive 553mhz with a E6600 on strap 1066 !!! great Overclocking :)
It is E6300, or am I wrong? anyway great result, Im working on it too :)Quote:
Originally Posted by boblemagnifique
Exactly , sorryQuote:
Originally Posted by Achill3uS
I have test at home : 6400 / 6600 / Q6600 with Abit Quad GT :
E6400 : 523mhz max
E6600 : 513mhz max (524mhz with Vmch @2.2v)
Q6600 : 423mhz max
np:)Quote:
Originally Posted by boblemagnifique
nice results you have, what kind of vmch mod did you done? I'v seen 2 ways.
the ways that I posted, the 2 are good (I measured but I prefer to weld directly on the pin)
http://boblemagnifique36.free.fr/Har...T/QuadGT11.jpg
What's nb and cpu cooling?Quote:
Originally Posted by boblemagnifique
Nice FSB you have. 553MHz:slobber:
Maybe I put vMCH today, I got only 516MHz @ 1.7V (no v-mod) with icewater (+8C) 3DMark stable. I really want FSB @ 530-540MHz for my E6600.:rolleyes:
so hard to decide.. quadgt or dfi 965-s
....what do you know,just pour some LN2 in the pot and my cpu and Abit was flying:D ...too bad the abit is dead now:( .....but fun, the Xeon 3060@5ghz at only 1.63vcore bios:cool: ......god damn, that chip got moore left.....
---cheers----
great result :clap:, congrats :toast:
Good Score NORZ !!!:clap:
I did some tests for max FSB @ 1.9 Volt mch :
MAX FSB Abit Quad GT Single Channel
[URL=http://imageshack.us]http://img518.imageshack.us/img518/1...ngleramrm3.jpg[/UR
http://valid.x86-secret.com/show_oc?id=183517
Regards
SPLMANN
Arrrrgggghhhhh, I can't get my AB9 QuadGT to work with high PSB (>400) on my E4300 and I've tried all multipliers. :mad: What could it be, the board or the CPU? :(
Great results guys.
Thanks guys, it was so much fun . Im at Norways biggest LAN right now, playing with hw together with aspstein and stoolman, we have broke a few wr this weekend, moore info later. Read moore here: http://gathering.org/tg07/
The Abit loved the LN2,and my Xeon, too bad about the mobo, but i will try again soon with new mobo:D
Pic of spi1M@10,297 ...... http://www.diskusjon.no/index.php?ac...post&id=141063
EDIT: splmann......wow,insane fsb mate:D
---cheers---
nassuz plz send me a Pm on diskusjon OC about the WR, aspsten hAva told some but maby you no more.
It could be the strap E4300 (800 not 1067)Quote:
Originally Posted by korby
No insulation on the blocks, what is the temp of NB and SB ?
that day's humidity was very low. so. nothing to need for insulating ^^; on -2 cellciousQuote:
Originally Posted by noobzed
and sorry to everybody my dears.
Just I'm looking for new Memory Module, so many things was postponed.
Now, I'll run. wait some days ^^
Tried 800 and 1066, didn't work. :(Quote:
Originally Posted by yotomeczek
I'll make a Aluminium NB pot for CO2 at work, just for fun. :rolleyes:
One question came in my empty stoopid mind, what's the distance of NB holes? I think it's about 58-60mm but does anyone know exactly the distance "mm"? I'm gonna do the 3mm spins with screwing tap on the bottom of the pot..or is it better to do straight "free" 4mm holes for long screws? :stick:
There you go mate ;)Quote:
Originally Posted by Boble76
http://www.xtremesystems.org/forums/...d.php?t=123299
PS make the overall diameter smaller as I had clearance issues with that design!
THNX J.B.!!!
I'll make the second pot like you. :)
I did some quick tests today with my brand new Quad GT.
These are results so far:
Max fsb (E6600)
http://valid.x86-secret.com/show_oc?id=188352
Max mem speed :mad: (600Mhz with cas 5 timings)
http://valid.x86-secret.com/show_oc?id=188354
This board is not good with my mushkin XP2 memory, it can do only 560MHz with 4-4-4-6.
vmch= 1.9V , cooled with water.
Nice SF3D, what block you have on NB? How cold the water was?
really temped to get one of these, and prob will do if DFI does not hurry up
Block is made by waterchill and water was only 14 degrees. My cpu is holding me back..hopefully. My cascade should be here in early may, so then I'm able to test it with subzero temps.Quote:
Originally Posted by Boble76