Clock Generator @Intel D975XBX 304?!
old
http://www.iamxtreme.net/coolaler/304_1.JPG
new
http://www.iamxtreme.net/coolaler/304.JPG
we must update clockgen now:D
Printable View
Clock Generator @Intel D975XBX 304?!
old
http://www.iamxtreme.net/coolaler/304_1.JPG
new
http://www.iamxtreme.net/coolaler/304.JPG
we must update clockgen now:D
new revision?
better or worse?
ooooooooooh rev 305 ?
when u option host burn in 50%Quote:
Originally Posted by zbogorgon
just got 30%:mad:
My 955 board used the same PLL as the normal Bad axe clockgen ICS9541. The new one, the CV115 is what I use in my current 945G Intel board, all I can tell you is that my 945G can't clock for :banana::banana::banana::banana:.
maybe intel dumbing down rev 305 badaxe, so they can use the better PLL for badaxe 2 ?
They wouldn't do that, would they?
I use this
http://www13.plala.or.jp/setfsb/down...15a4_IG-80.zip
to overclock, setfsb. It probably won't work on the badaxe tho.
Does that clock generator generate alot of heat?...is it nesscary to heatsink it?
that zip file sets off my anti virus immediately when i try to install. it says it has tr/killwin.c.20 trojan horse.
very truly yours,
politenessman
Quote:
Originally Posted by politenessman
It does for me too. I have to turn mine off than use it. For some reason all my anti viruses pick it up as a trojan even though it isnt...
I got the file from
http://www13.plala.or.jp/setfsb/
New board from Frys has ICS.
Nice find, looking forward to seeing clocks from that version.
Rev. 305?
New boards from Fry's now have IDT, clock gen been made yet?
I can confirm that the new retail Rev 304 I just received from Scan here in the UK has the IDT chip as well.
SysTool works for me on increasing the FSB beyond 30% on a D975xbx with the IDT clockgen.
Thanks a ton Charleski! I have the IDT and i've been stuck at 30%
Was stuck at 3.46 Ghz, currently priming away at 3.65 Ghz, yay.
Let us know how it goes. Even with watercooling I've been having probs with the temps (62degC @Vcore 1.488 fsb 380MHz, didn't push the volts beyond that). I think I need to fix the airflow over my radiator though, and probably reseat the water block.
[edit]temp measured with CoreTemp, Vcore is that reported in HWmonitor in BIOS
Please test the 1333FSB, if your board fails to post with 1333 enabled we need the numbers off the white sticker between the CPU and memory slots.
Post the numbers in this thread.
Nice find on the clockgen, lets see what this IDT can do.
My sticker reads:
BQBX62702258 AA D27094-304
I'm using the 1334 BIOS and have the OC DEBUG mod. I tried altering the fsb strap to 1333 in BIOS and it did nothing to the fsb, but the board still POSTed.
I have heard that 1334 BIOS doesn't work with 1333 strap.
I was using 1304 bios and couldn't use 1333 strap anyway tho.
Yes, I should really try reflashing to 1304 again. I had a load of problems on getting the board to POST at all initially that I described here. I initially flashed to 1304 after getting the board to reset, but that gave me no OC options at all (just the warning text, no modifications), and flashing to 1334 fixed that.
I have 2 D975XBX rev 305, one among it has a chip ICS and the other a IDT. The ICS goes up to 444 MHz to super pi 1M, the IDT holds about 432 MHz. I do not know if it is the chip which makes this difference.
http://perso.mweb.fr/sugeknight/PC/D.../Fouge/idt.png
Systool blocks to 399 MHz, after I must use Set FSB.
>charleski: I have same the problems that you, I had the rev 305 flashed with the bios 1304 and I was obliged to flash to 1334 to have the option of overclocking. Some people say that the 1034 are worse than the 1334 but we can't flash rev 305 with bios 1034. It was similar with my old rev 304, obliged to flash the motherboard.
any word on when the bad axe II will be out?
rev 305 went to distributers (if they place orders from intel) on 08/01/2006. Here are the changes:
http://intel.pcnalert.com/content/eo...N106391-00.pdf
"Description of Change to the Customer:
1. Updating BIOS to version 1304.
2. Adding new SPI BIOS chip vendor option for ATMEL.
3. Updating the lead-free label."
AA = D27094-305
Retail Box = BOXD975XBXLKR
Can anything be done about the new 304 boards with the new clock generator not allowing settings above "30" under CPU burn in ?
guys try these tweaks listed at http://www.xtremesystems.org/forums/...d.php?t=111400 loosening tRD and tRFC on my bad axes allowed me to jump from 433fsb max to 440fsb max which for E6600 means going from 3898mhz to 3962mhz :D
433 FSB is a 63% OC. :woot: I thought the Bad Axe was limited to 50% OC. Is there a mod that allows this? Where is it documented? You could end up being my hero, eva2000. :)Quote:
Originally Posted by eva2000
Kango
past 400fsb on 1067fsb strap use clockgen ;)
Which clockgen do you use? IDT or the older one?Quote:
Originally Posted by eva2000
both my boards are ICS based
For IDT boards use systools for clockgenning.
Can anyone tell if the IDT is worse than the ICS? And is an issue of these chips that >30% in BIOS options doesn't work?
edit: I just took a look at my RETAIL 305 board (received it yesterday). I've got an ICS Chip on that board...
on a friend's bulk 305 board, an IDT Chip is used!
I received this morning 3 Bad Axe rev 305, the 3 were equipped with the clock generator ICS (like the first), it seems that Intel did not modify all D975 with Chip IDT but only some.
The chip ICS is:
660141
0606
954108CFLF
I have BAD AXE 304 and my chip ICS is:
660141
0606
954108CFLF
MY question is hove much is max FSB with this chip?At strap 1066 I have this http://valid.x86-secret.com/show_oc?id=112930 (I use clock gen)