Tanks a lot :)
I don't mind elbows, i got a laing, it has enough power ;)
Printable View
Tanks a lot :)
I don't mind elbows, i got a laing, it has enough power ;)
love DFI with UV light ;)
Just great Peter Burg :)
does anybody know the dimensions of one dual rad ? not the full rad but the part that we cut from the cases :p i want to put a dual in the roof of my stacker bat i have my dual on the bottom of my stacker and i cant take it out now because i need the pc running :(
the blue lines those dimensions i need if anyone has a spare dual rad please :(
http://img227.imageshack.us/img227/3835/gtx2rd3.jpg
Very neat. Very pleasing color scheme ! Congratulations .
Regards,
Bogdan
enjoying the Maximus Formula?Quote:
Originally Posted by aicjofs
I hate mine. 460 FSB. I've tinkered for a few hours and I'm betting if I tinker for a few more i can hit 470, but no magic 500 for me :(
thank you for doing what we were all thinking, NV, in your next Nforce board (which you should put soundstorm back on), please remove all the suck from your northbridge fan before you ship it.Quote:
Originally Posted by Carnaby
And just a word to the wise: I got a couple of really nasty pics of an absolutly astonishingly bad TIM application job on my 680i board. I heard its better now, but, if you're liquid cooling your CPU, I'd hate to see you get pulled down by your NB because its too hot. Putting on some decent paste got me 3C back. Heres the pic from the bottom of my 680i NB hs after removal:
http://i119.photobucket.com/albums/o...2869443201.jpg
Using all the TIM they supplied I made a nice message for all the folks responsable:
http://i119.photobucket.com/albums/o...673857_0_1.jpg
imapwnyou - skipping the 9800s all together? ;) seriously wish the 9800 didnt suck so hard. Oh well, GTX280 looks to cure our performance withdrawl problem :)
I have 2 actually. 440 is about the most stable for 45nm quad which I don't like. Otherwise a relatively solid board.Quote:
enjoying the Maximus Formula?
I hate mine. 460 FSB. I've tinkered for a few hours and I'm betting if I tinker for a few more i can hit 470, but no magic 500 for me
@Peter
Beautiful build. I like the UV, you didn't overkill it. Have a picture of the full case other angles? I'd like to take in the whole thing.
First liquid cooling build, took about 10x longer than I planned (and about 10x the budget x_x)
Used this site quite a bit for this project and learning about WC in general - much thanks for the amazing amount of helpful info!
Build is a Mountain Mods UFO Duality, left side is MB + blocks etc, right side is Hard drives, 2nd pump/fan controller/dvd + misc. Wedged between the 2 sides is the hidden PSU - tried to hide most of the cords in there. Still waiting on an RMA for one of the Enermax cluster case fans (led's not working) and need to tidy up some fingerprints and a bit more wire management, but finally closing in on the finish line for this project.
The colored loop is purple, though it looks a bit pinkish in the pics :mad:
Radiators are 2x PA120.3 each in a push/pull fan setup.
Waterblocks are Danger Den ~
Pic overload incoming :eek:
http://i5.photobucket.com/albums/y18...8/DSC00235.jpg
http://i5.photobucket.com/albums/y18...8/DSC01938.jpg
http://i5.photobucket.com/albums/y18...8/DSC01965.jpg
http://i5.photobucket.com/albums/y18...8/DSC01914.jpg
http://i5.photobucket.com/albums/y18...8/DSC01933.jpg
http://i5.photobucket.com/albums/y18...8/DSC01920.jpg
http://i5.photobucket.com/albums/y18...8/DSC01960.jpg
http://i5.photobucket.com/albums/y18...8/DSC01899.jpg
http://i5.photobucket.com/albums/y18...8/DSC01903.jpg
http://i5.photobucket.com/albums/y18...8/DSC01905.jpg
http://i5.photobucket.com/albums/y18...8/DSC01934.jpg
http://i5.photobucket.com/albums/y18...8/DSC01947.jpg
It is Don Quixote de La Mancha!
Nice build too, btw! :up:
I have a similar rad to that, an XSPC, although mine also has a tank. I cut a hole in the top of my lian-li, but not the same cut as that. Here's what I did:
http://meh-space.com/userfiles/blitz...ct/sm2Rads.JPG http://meh-space.com/userfiles/blitz.../smTopGood.jpg http://meh-space.com/userfiles/blitz...smFinalCut.JPG
So it's just a cut out for the 2 fan holes, but due to space limitations I had to fit the rad closer to the top anyway. I measured it all by hand, then cut, as the radiator mounts were just a pain in the ass to get right. If you like, I can give you the dimensions.
Good mornin'! :)
Of course. Sorry for the bad quality, it's shot with my mobile phone, my brother's got a better cam, but he's asleep and I don't want to wake him ;)
http://www.abload.de/thumb/dsc00608i61.jpg
http://www.abload.de/thumb/dsc00609o3w.jpg
Well, this is it. There is still some tuning to come.
You might ask yourself, why the tubes go into the case. Well, I didn't want them to be at the back, I had it like that a couple of times but I didn't really like it. I think this is much better.
Ah and yes, this is no mora 2 Pro, this is a mora2 core built into the fan-adapter so you can mount fans on it :)
Cheers,
Peter
I finished my window, changed fluid, added some coils and did some more sleeving and cable management,
http://img.photobucket.com/albums/v3...j/DSCF3272.jpg
Comments?
Thanks
Do you mean the cathodes or the camera's shutter speed??
Benching with water cooling but rad is dipped in iced water.
http://i275.photobucket.com/albums/j...p/DSCN6267.jpg
Redid wire management. Cant believe how :banana::banana::banana::banana:ty this case is for wire management...
http://i275.photobucket.com/albums/j...p/DSCN6272.jpg
http://i275.photobucket.com/albums/j...p/DSCN6273.jpg
The cathodes. A fairly low white light will have a more impact.
Thanks, but I went for the blue cathode because my case is black and blue. :)
He's referring to taylormsj's question above, whether he meant dimming the lights or the shutter speed of the camera.
And I agree, a dimmer effect would look sweet, even if it does look great now too.
l33t p1mp, lighting tends to work better if you hide the cathodes so that it simply shines onto the components and so that you can't see the cathode directly - indirect lighting.
Here you go:
http://i182.photobucket.com/albums/x...pgLip/Rad1.jpg
This is from a PA120.2 so the out dimensions are different and it has rounded inner edges like I marked out in red.
Thats not a PA120.2
http://www.thermochill.com/guides/PA120-2.pdf
I finally finished my TJ09 build. :)
http://img167.imageshack.us/img167/7937/66024929dh3.jpg
http://img167.imageshack.us/img167/3814/74623502ir3.jpg
http://i276.photobucket.com/albums/k...2008/Intro.jpg
http://i276.photobucket.com/albums/k...8/DSC_0219.jpg
http://i276.photobucket.com/albums/k...8/DSC_0225.jpg
http://i276.photobucket.com/albums/k...8/DSC_0222.jpg
http://i276.photobucket.com/albums/k...8/DSC_0240.jpg
http://i276.photobucket.com/albums/k...8/DSC_0231.jpg
http://i276.photobucket.com/albums/k...8/DSC_0218.jpg
http://i276.photobucket.com/albums/k...8/DSC_0233.jpg
http://i276.photobucket.com/albums/k...8/DSC_0238.jpg
http://i276.photobucket.com/albums/k...8/DSC_0104.jpg
http://i276.photobucket.com/albums/k...8/DSC_0111.jpg
just some pics maded quikly cause my camera's battery are gone!!
http://www.pctunerup.com/up/results/...any0450pl7.jpg
http://www.pctunerup.com/up/results/...any0452be3.jpg
http://www.pctunerup.com/up/results/...any0456xs2.jpg
@ XPatar Nice TJ07:D i like both versions im a sucker for that shade of blue.
@adidassler
great pics!
A few changes in my Lian Li... New 1000 Watt PSU and an aluminum/acrylic reservoir+two pumps (inside it)... No way to pull up BIOS bridge :rolleyes: Actually i have a new case; Cosmos 1000 and working on it now and hope to pick it up soon...
http://img238.imageshack.us/img238/3...031copyjo3.jpg
http://img214.imageshack.us/img214/7...032copynm6.jpg
http://img111.imageshack.us/img111/5...033copyyj5.jpg
http://img214.imageshack.us/img214/4...034copydl0.jpg
http://img214.imageshack.us/img214/7...035copypt9.jpg
Got bored and took some more pics!!!
adidassler srsly! awesome pics mate far out !
what the camera? i need to purchase it asap :)
Nikon D60 from .exif
so here is my pc just 2 pics right now :D
http://i184.photobucket.com/albums/x...8/DSC01343.jpg
http://i184.photobucket.com/albums/x...8/DSC01348.jpg
The rad wont fit inside the top of the case,because of the other graphics`s card .even with no fan`s on the inside..and don't really want to move the bottom lay out to much at the minute,so that`s why i have put the rad out side,till i decide what i`m doing with the motherboard and graphic`s card`s.all so will be changing the rubbish read sata cable`s`..lol
Made that looks sweet. I would change your loop order tho, i dont like the idea of the pump feeding the single rad and then the resevoir, i think your flow would be a lot better if your res fed your pump
Love the case
Work in progress .............
http://www.pctunerup.com/up/results/...e053Custom.jpg
http://www.pctunerup.com/up/results/...e051Custom.jpg
http://www.pctunerup.com/up/results/...e055Custom.jpg
http://www.pctunerup.com/up/results/...e050Custom.jpg
To be continued :D:D
@CarNabY.
Damn that looks sweet !
I really like the setup as it is right now. Nice green water and green fans, great SLI setup in a beautiful Lian-Li. Keep up the good work !
CarNabY, looks nice ;)
What pump do you use in your system(loop?)? I think it isn't laing, but which? What temperatures do you have?
That pump is a SANSO PDH 054
http://www.ybris-cooling.it/images/p...o/pict9196.jpg
Excellent for single loop and many Waterblock :yepp:
here's my stacker 831, first loop finished, will add a second loop for nb/sb/mosfet later :)
http://img217.imageshack.us/img217/5635/dsc00426dn0.jpg
http://img77.imageshack.us/img77/3307/dsc00473jw3.jpg
http://img217.imageshack.us/img217/7718/dsc00434zz5.jpg
http://img217.imageshack.us/img217/5668/dsc00436dj5.jpg
http://img366.imageshack.us/img366/3646/dsc00471px9.jpg
http://img257.imageshack.us/img257/7388/dsc00467wx4.jpg
http://img257.imageshack.us/img257/1683/dsc00468sp4.jpg
http://img257.imageshack.us/img257/8273/dsc00441qr0.jpg
http://img257.imageshack.us/img257/3028/dsc00437yo5.jpg
http://img257.imageshack.us/img257/9293/dsc00479ks5.jpg
!! I love the heatsink poking out of the IO shield and getting cooled by the exhaust! haha n1
inonefly where is PSU ?
Where is powercable?
yep the PSU is relocated at the bottom front. Used a right angled power cable, running from the front to the top of the psu then through the bottom vent ( the bottom fans ) to the outside of the case
http://img87.imageshack.us/img87/6838/dsc00423ls4.jpg
http://img87.imageshack.us/img87/6537/dsc00422hu7.jpg
http://img87.imageshack.us/img87/8840/dsc00421po9.jpg
thanks for your comment,i put it that way for a reason ,that pump i`m using is more than powerful enough, as you proberly well no,and if the water circulates slower the water move`s slower though the block and allowing the heat to transfer better from the block to the water,and with an idle temperature of 29c cpu @3.2 i dont think that is to bad
like the case looking clean and tidy,please check out mine on page 366 if you have the time
*scratches head*
The rate of heat transfer is dependent upon the delta. The greater the difference in temperature, the faster the transfer rate. Accordingly, the longer the water remains in contact with the CPU, the less efficient heat transfer will be, and the less heat-per-molecule is transferred to the coolant. There is absolutely no benefit to having your coolant in contact with your CPU for longer periods of time, in fact doing so will reduce the amount of heat transferred.
By all means, if you can't be bothered, leave the loop as it is. As you say, your temps are fine. But you aren't getting better temps by slowing down the flow of coolant.
http://www.atomic-modding.de/hwluxx/...8/DSCF8021.JPG
http://www.atomic-modding.de/hwluxx/...8/DSCF8024.JPG
http://www.atomic-modding.de/hwluxx/...8/DSCF8032.JPG
http://www.atomic-modding.de/hwluxx/...8/DSCF8035.JPG
http://www.atomic-modding.de/hwluxx/...8/DSCF8039.JPG
http://www.atomic-modding.de/hwluxx/...8/DSCF8041.JPG
yes i understand what you are saying,who is right and wrong about water cooling solution`s you hear so much this ways right this ways wrong.. i use to have the pump straight to the res before and it use to run on idle cpu@3.2ghz,about 35c.now it run`s around 29c as i said.I have a thermometer to keep an eye ambient temperature in th room,but it`s not that i cant be BOTHERED it work`s for me..p.s thought this thread was for showing water cooled case`s only:)
RADIUM...nice clean system
XPATAR..i have read most of the stickies before..i just try thing`s my own way,and this way my temperature has dropped what more can i say
Posting pics and giving advice/feedback. There wouldn't be much point to it otherwise, now would there.
Dude, this is basic science. It's not like a "vinegar vs tomato sauce" or "higher head vs higher flow rate" debate where there's ambiguity, it's just not open for debate without extensive controlled testing. Your watercooled rig is not immune to the laws of physics; if you're getting lower temps with a lower flow-rate, some other variable has changed.
thx for the positive feedback :cool:
And the 88gtx will be watercooled soon, but i dont know wich waterblock is the best.... EK or Watercool (cheaper) ?! My favourite at the moment is the EK Waterblock in the nickel plated version :D
When I get around finishing this project off and taking real photos, I'll post them here but for now I'm just going to post a link to a worklog for my Lian Li Cube setup. If it's against the rules to post links like this to other sites, just delete the post.
http://www.xcpus.com/forums/case-mod...-work-log.html
this is how my stacker is now :)
http://img221.imageshack.us/img221/3434/dsc02149gx7.jpg
Better pics of my waterloop :).
http://img171.imageshack.us/img171/5...g953cs8.th.jpg
http://img171.imageshack.us/img171/3...g955vu3.th.jpg
http://img80.imageshack.us/img80/3601/img956xa4.th.jpg
http://img171.imageshack.us/img171/4...g958wz2.th.jpg
http://img384.imageshack.us/img384/9...g959we9.th.jpg
http://img171.imageshack.us/img171/7...g963ov2.th.jpg
http://img384.imageshack.us/img384/5...g964pu8.th.jpg
http://img384.imageshack.us/img384/8...g970ky5.th.jpg
http://img80.imageshack.us/img80/7351/img960al3.th.jpg
http://img80.imageshack.us/img80/3264/img967oe9.th.jpg
http://img384.imageshack.us/img384/4...g969jr2.th.jpg
http://img384.imageshack.us/img384/5...g973xk4.th.jpg
http://img72.imageshack.us/img72/5733/img976hu4.th.jpg
http://img80.imageshack.us/img80/8281/img974ag9.th.jpg
Just a teaser of what is to come:
http://www.medonemedical.com/images/...s/top_view.jpg
Please come visit my worklog and share your opinion/advice: U2 UFO - Radium
@Tile: Drool:slobber: ...I love that block, great polish! btw what are the fittings?
Alphacool quick-connect fittings for 10/8 mm hose.
Where can i buy that pci slots cover? It looks good ...
Well here's my H20 Antec Nine Hundred - not the cleanest as the other PC's I've seen on here but it was tough working with the 900 and trying to make everything fit nicely.
Videos on my youtube channel (link in sig) as well as specs.
http://i282.photobucket.com/albums/k...g?t=1213145404
http://i282.photobucket.com/albums/k...g?t=1213145551
http://i282.photobucket.com/albums/k...g?t=1213145573
http://i282.photobucket.com/albums/k...g?t=1213145587
http://i282.photobucket.com/albums/k...6/DSCN1566.jpg
http://i282.photobucket.com/albums/k...6/DSCN1565.jpg
http://i282.photobucket.com/albums/k...6/DSCN1563.jpg
http://i282.photobucket.com/albums/k...6/DSCN1560.jpg
http://i282.photobucket.com/albums/k...6/DSCN1570.jpg
http://i282.photobucket.com/albums/k...6/DSCN1569.jpg
As I said, not the cleanest but the 900 was a challenge to work because it's quite small to fit a full size watercooling system inside.
I plan on getting a PC-P80 and a couple 4870X2's when they're released, with some other goodies as well.
FrozenCPU also has 2 brands of slot covers sets. Just incase you are wanting to buy some and can shop there. I am about to get me a set of the nicer ones like these >>>
Code:http://www.frozencpu.com/products/6304/ram-36/FrozenCPUcom_Advanced_Slot_Protector_Kit_-_UV_Blue.html
Waymon what is your temps?
@ Waymon3X6
That green really reminds me of the ooze from Teenage mutant hero turtles lol. Looks great.
I got the 2nd film on vhs somewhere :P
Haha, thats cool Timmy.
Begrip, the Quad @ 3.6 idles at around 38-40C, load is around 60C
GPU's idle at 34-36, load is around 44C
NB is pretty hot, I think I will remount it with some AS5 when I get some free time - temps are around 43C
Thanks for the comments!
is there any guide to pc photography here?
Some of you guys produce some amazing pics!
the closest one i've seen is here... :)
http://www.million-dollar-pc.com/
scroll to the bottom of the page for some tips
1st post.
Hi all!
http://farm3.static.flickr.com/2171/...538a0a22_b.jpg
:toast:
Woah, what case is that, Jois21?? and:welcome:
Thnx a lot Pedalmonkey.
Its a silverstone cw02. Plexi is my "mod", normally there's a simple black cover...
http://farm3.static.flickr.com/2239/...f92d5867c7.jpg
Thats one of the nicest blue liquid ive seen, what did you use