Tsource, your mch volts are probably due to running 1:1. I found it less cooperative by alot, than 5:6. Same thing, I just wanted to use more ram. P/L may be related to that too. Looking good though 4.5 1:1. Damn. Good luck, some big numbers on blend around 7hr50+ min. at that speed.
Quote:
Originally Posted by Jor3lBR
Bios F6 right? Werent you using F4 for the most part? Also have you played around with the 8f bios at all?
Anybody know if the new UD3P beta 8f fixes resume from sleep yet? I wonder why its soo hard to fix. Sleep is awesome. My System really needs some sleep..... Do the UD3R's suffer from that bug as well? Thanks.
Ah, thanks man, I didn't know 1:1 made a difference as far as NB load goes. So what is the consensus on the RAM then, try and stick with 1:1 or get the highest FSB possible? i.e. stick with what I have or go DDR1200 with the 5:6 divider?Quote:
Originally Posted by coop
hey gys
just scored a ud3r 1.1 today . i installed f6 and ill start benching tommrow .
ive read through some of the thread great info and results.
just wanted to know hows f6 so far for benching?
whats the best divider to use for 500fsb + ?
im starting with 2b strap to see how i go for now .
Jor3lBR, TSource nice results, waiting my UD3P now...
Jor3lBR, are u serious? Wanna see your 5 GHz stable results :rolleyes:
Thanks stasio...
dam Jor3lBR, your chip is a beast. :D
its the same i thingQuote:
Originally Posted by WhiteFireDragon
Why not BIOS F7a,posted on Giga site?
Waiting mine too :D
So long to get some hardware from France to Africa :/
With 2x1gb Crucials BallistiX 16000 is it good or I should find something else ?
well got mine installed today what things should i dl ? also bios is unknow for me lol from P965 to P45 lol
got my X3350 to 4GHz with less volts then my old mobo at 3.8 @1.55+ lol
but what are some safe volts to start off on idk what some even do so
so i take it that flashing the bios to newest version is the best thing to do? i ask this because i shall have the UD3R soon. hurry up tax return~!Quote:
Originally Posted by stasio
Just make sure you flash the right bios for your board. The 'P'and the 'R' have different versionsQuote:
Originally Posted by mattlyall06
I run Orthos Blend for 5+ hours @ 8x525 FSB with RAM 1:1 and now I am getting random BSOD's on startup in the morning after I shut down for the night. Some days fine, other days BSOD. Any suggestions? I was think of upping PLL from 1.5 to 1.57v, VTT from 1.26 to 1.28-1.3v, and setting mch to get .68-.66 in ET6. Also, what's the best test #'s in MemTest to run and for how many passes? Thanks.
http://img17.imageshack.us/img17/488...blend5huv9.jpg
Test #7 in memtest
you may need .785 for cpu ref
From my point of view, this Beta bios shouldn't have left the alpha stage... totally messed up again like F2... F5 remains the best bios for the EP45T and my CPU's/RAM combo...Quote:
Originally Posted by stasio
Better NOT give it a try... :down:
I'll see if .785 help. Thanks!Quote:
Originally Posted by SpeedEuphoria
bluestang, nice result! :)
try to get Linpack stable and i am sure that you don't get BSOD anymore.
*maybe you will need little bit more Vcore for Linpack stable ;)
and raise PLL to 1.56V and VTT to 1.30V, that's may help you get more stable.
bluestang,first try setting vtt to 1.28 and vmch to 1.36-1.38, and leave mch ref at 0.70.if that dont work try messing with cpu ref from 0.74-0.80.good luck
Yes! had to shut it off to go to work but got 6hrs in @4500 with 1.37vcore. and Tsource, it is just easier at least on mine. Better pi times iir also.
[IMG]http://img14.imageshack.us/img14/6219/137p95fw8.jpg[/IMG]
For the UD3P, is F7a the best BIOS for 45nm quads? I heard F8a wasn't too hot.
ok if test it its goodQuote:
Originally Posted by stasio
http://www.abload.de/img/520fsb5is5.jpg
hey guys got my system running nice ish just need help i carnt get acronis image restore to work i can make a backup and ervything but when i go to use it to restore my system at the boot screen it says press f11 but it then says it carnt find any hard drives? never had this problem on my 790i this is the first time i have ever see this happen
is there any thing i can change in the bios to get it to work i have me first boot device as my hard drive
Anyone else get bad freezing instead of just the normal prime failing? Prime never fails, the board just hangs. While I have enjoyed learning this motherboard it may be the fist piece of hardware I intentionally do physical damage to.
check this out.ive got a 9650/8500 core processor.
http://i44.tinypic.com/66jdb4.jpg