God dam Tyke, can I have some seeds from your dollar trees? :D
Printable View
God dam Tyke, can I have some seeds from your dollar trees? :D
:)Quote:
Originally Posted by slim142
I do feel the pain of every expense I go to, it just becomes a bit of an obsession!! Interesting the difference those drives made though!!
I feel you brotherQuote:
Originally Posted by Tyke
But $600 for 2 drives seems a lot for me, with 1 I would be so happy :rolleyes:
How would the raptors even know to care about the chipset??Quote:
Originally Posted by Tyke
What numbers do you get running HD Tune or HDTach? I have 2 VR in Raid0 but they suck in my 780i. A week ago, when I used them on my DFI LT X48, I got a burst speed of 460MB/s. Now I get 390MB/s. The result in HD Tune is even worse.Quote:
Originally Posted by Tyke
Thank you for the reply.Quote:
Originally Posted by slim142
np:DQuote:
Originally Posted by golfjam
No idea, I'm just reporting what happened! However Toms Hardware did report problems with the Raptor, and stopped using them in their Vista test system.Quote:
Originally Posted by Natalia
Quote:
Originally Posted by golfjam
I have just ordered an Adaptec 5405 Raid Controller (with 256MB of onboard cache and a 1.2GHz dual core processor!!!), so I will post the figures I get with that later in the week. Look at the improvement MaximumPC got with four Raptors in Raid using this card!
http://www.maximumpc.com/sites/futur...chmarksBIG.gif
These HDTach results are using the long test, the short test gives 172MB/s average read, 340MB/s burst and 7.2ms random access.
Thats a good speed (well, not really into HDD performance, but it seems pretty high for me)
These are a lot faster than the raptors, and massively cooler and quieter! When I get the raid card tomorrow I will redo the benchmark!Quote:
Originally Posted by slim142
Have you tried the 0801 bios yet, I can run 1800/2000 unlinked for the first time with it. However it is not quite stable at the settings I had on 0704, back to those GTLS!!!
Quote:
Originally Posted by Tyke
Im going to run that app to see how fast my raptors run :) I would also love to try one of those VRaptors, but $300 is out of budget for me :(
Im on 0801, booted and surfing the web right now. Will leave it priming at night. Im also going to see if this BIOS fixed my SLI issues.
Overclockes better? Will check that as soon as I finish with the SLI stuff :)
EDIT: Im so annoyed that I still have the SLI issue that I dont have any reason to keep pushing my cpu/ram. Will wait for a BIOs that fixes SLI issues first, then keep pushing system.
Bah! I feel like I have a laundry list of what could be causing instability issues:Quote:
Originally Posted by Tyke
790i Chipset
Raptors
Quad-SLi Hardware
Quad-SLi Drivers
OCZ Memory on the 790i
I'm almost ready to give up and live with the occasional BSOD I get once a day.
:shrug:
so which boards is mainly free of corruption trouble?
Mainly the boards with Intel chipsets.Quote:
Originally Posted by trt740
Sorry couldn't resist :D
Actually I shouldn't be one to rip the Nvidia chipsets as I've been running 790i for about a month now and haven't had any corruptions issues. Or major issues at all for that matter (knock on wood).
Well yeah if you want to be 100% free of corruption go Intel or AMD
And just to answer your question, SIIE is fixed with 0704 and eVGA with P05, however, some people still suffering from corruption. Dont know what to say about that.
Ya sure? Dinos was saying no reports of corruption since P05 for the reference boards.Quote:
Originally Posted by slim142
Seems the Asus board has had more trouble then the references so far i think :shrug:
Well go to eVGA forums and see it by yourself. Not 1 but 1000.Quote:
Originally Posted by Xello
Keep in mind, eVGA is now in production 3 and some people still complain, some about corruption, some about OC etc
let's stick to some factual information...i've sifted through a few pages and it certainly doesn't look as bad as you are making it out to be :shrug:Quote:
Originally Posted by slim142
i bet that ppl that are having real issues are in minority now
also if i experienced issues in the past i would use a completely different hard drive to check now
i have been honest and upfront about my corruption from the get go and i definitely put my board aside as i just could not bother any more...........
with P05 i have now also purposefully tried booting with completely unstable settings to try and corrupt my OS without luck.....OS still loads when i back down a little
:shrug:
Thank you for the numbers. I think I'm going back to my X48 as soon as they release HD4870 cards. I subscribe MaximumPC and saw the review. The improvement is awesome but it's too expensive.Quote:
Originally Posted by Tyke
Quote:
Originally Posted by dinos22
Well for some reason, everytime I go and check I see people complaining about corruption still not fixed.
I dont know, they are probably doing something wrong because as you said, is not about just updating BIOS, but to do a fresh installation of OS too and format the drive just to make sure.
I also tried hard settings, windows wouldnt load or I would freeze in BIOS screen but never corrupted my system which makes me think that people are too lazy to start from the beggining. If you are experiencing corruption
1) format the drive
2) fresh install of OS
3) if 1 & 2 didnt work, OC from scratch
Same here.Quote:
Originally Posted by dinos22
If it's not going to corrupt my drive at Linked/Synch at QDR2100 / DDR3-2100 7-6-6-21 1T 1-1-5-20-1-1-1-52 I don't think it's bout to happen again.
S2E BIOS 0801 used.
Slim, fresh installs of OS itīs what iīve been doing almost daily in this DAMN board!!!!:mad:Quote:
Originally Posted by slim142
I STILL HAVE CORRUPTION with BIOS 0704 and 0801 when i run memory LINKED AND SINKED...
And itīs not the RAPTORīs, iīve been instaling the OS on my SEAGATEīs and have the very same problem.
When i mean CORRUPTION, i mean it fails the SFC test, the OS boots ok but it always fails the SFC test, iīve tried raising voltages in NB and SB, but made no diference.
A keep having windows dreamscenes artifacts with BIOS 0701,0702,0703,0704 and 0801 but not with 0603. This artifacts grow in number when the computer is doing memory intensive tasks. For example if i run everest ,and run the memory benchmark i see artifacts all over the screen.... :(
With BIOS 0603 i play Crysis for hours without any glitch, with later BIOS is just stops working after 1 or 2 minutes with the driver as stopped worked and was recovered...
Hello guys
I've been using the EVGA 790i SLI board for about 3 weeks. I wasn't aware of this corruption issue and tried with the shipping P03 bios first and corrupted my windows setup 3 times in 2 days. Then I found out about it and upgraded my Bios to P05. Even so it didn't solve all the problems but it sure helped the issue a lot. After the flash procedure I had corruption two more times in 2 weeks. And for now it seems to be stable for about a week or so. My setup is like this :
Evga 790i
Intel QX9650 and E8500 (sometimes)
2x1GB Super Talent 2000 MHz (9-9-9-26)
512 MB Zotac 9600GT AMP
WD Raptor 150 GB
Silverstone 850 Watt PSU
I am now using my E8500 cpu at 5200 mhz - 9.5x547 with vapochill. My ram are working in unlinked mode at 1790 MHz 8-7-6-20 at 2.0 volts. My vcore is 1.70 volts and SPP voltage is 1.45 volts. The others are set to auto. I am afraid to stress my sticks and try higher frequencies with CL7 timings because whenever I do it the windows setup can get corruptted after a numerous number of unsuccessful boot trials. You can say that it's bc of my trials but normally I didn't get this kind of behavior from other Intel chipsets.
I am now using the above settings and everything seems to be ok for a week like I said but the issue is not %100 solved. I just want to point out that P05 can still make these issues.
Silverstone
Maybe you should ask M@G!C for his settings because he is living a nightmare.Quote:
Originally Posted by BenchZowner
I understand how you feel. I hate to take 20 mins to install the OS and all that crap.Quote:
Originally Posted by M@G!C
Benchz said SFC should not be used as a source to indicate corruption. He mentioned long ago he got error with another board (x48 I believe).
Have you tried stock settings and see if you get those artifacts? Are you sure your sticks are 100% working? Maybe a defective video card?
The artifacts only happen if i run 1800Mhz on memory even unlinked and unsynked. If i run memory at 1600Mhz no problem at all. My sticks are 100%.
I would run at 1600Mhz until BIOS matures a little then...
sorry guys, dont have the time to catch up with this thread, but in case some of you still have corruption issues gary over at anandtech is kind enought to offer to forward your problems to nvidia.
thanks gary :toast:Quote:
However, we are still seeing reports on other forums with users having problems with the updated BIOS code. If you are one of the unlucky souls with this continuing problem then we would like for you to email us ( gary dot key at anandtech dot com ) with your configuration and settings. We will try to replicate your problem, but more importantly we will continue to work with NVIDIA to solve any remaining issues with this chipset in regards to data corruption.
I already emailed him about the SLI video freezes. Hopefully this will be solved soon.
Has anyone tried the new nvidia chipset drivers just released (version 15.17)? They are WHQL and I am trying to figure out what they changed.
i heard some issues about nvidia packaging the drivers incorrectly or something like that. apparently the installation would freeze in the middle when installing the ethernet drivers. i'm gonna wait a few days until it's confirmed nvidia has fixed whatever problem it was.
Quote:
Originally Posted by fadetoblack
You probably heard that from me or from the guy in the eVGA forums. Whatever the case is, the good side about this is that at least NVIDIA is updating their drivers. Remember 680i? We had 9.53 for like 2 years...
they have reposted the drivers for download on the nvidia site again (after pulling them for 2 days)
S2E BIOS 0801
link