Yes, you'll lose the array.
Printable View
Yes, you'll lose the array.
:(. I could always make an image from the current but, I don't know if I want to do that because I see issues al day with images here at work.Quote:
Originally Posted by Richard Dower
If my board is a x48 board covoered up as a ex38 then I would try flashing to the x48 bios.
I don't advice you to do that ... The mobos are identical for X48 and X38 but the chipsets not. X48 doesn't have ECC, and it's possible that your mainboard will not boot with X48 bios ...Quote:
Originally Posted by truehighroller
Well that would suck now wouldn't it lol.
Does anybody know what the max FSB I can use on this board and still be able to resume from S3 standby mode?
Which board the ex38 dq6 or the x38 dq6? I have the ex and the bios is far from perfect at this point with it. The ex38 I have, is having issues with all the memory settings but, 2.66d and 2.50a. I am on the 2.5a right now with a clock of 3.9Ghz~ "right now". I am trying to beat my old #1 record for single card score on 3dmark which is documented/ my highest clock on my Q6600 with my ramed right now p35 dq6 rev. 1.0 of 4.16Ghz~ with Air which I achived in the Gigabyte Overclocking contest not to long ago...
wow those puppies are fast...Quote:
Originally Posted by Richard Dower
G.SKILL 4GB kit is now at it's lowest price:
http://www.newegg.com/Product/Produc...82E16820231145
Anyone wanting a 4GB kit that overclocks easily to 1066MHz should get this!
just sold one of those kits today :D my old one. they are really very good kits. highly recommended. will buy g.skills again, anytime.Quote:
Originally Posted by Richard Dower
Anyone with a 45nm CPU be careful if using AUTO voltages in the bios because i just tried it while testing a small overclock and the motherboard set it to 1.59 VOLTS!!!. Way more than it needs and in the dangerous zone.
I settled on 1.28v
GA-Ex38-ds4 cycle rebooting problem. Ran mushkin ddr2-1066 would cycle reboot without posting to bios every 5 seconds- tried patriot ddr2 800 same effect. With the patriot ddr2 667 it booted and set memory voltage and all is well with any memory. Flashed Back from flaky f3 bios to f2 and mushkin 1066 was seen correctly and booted timings were high 5-7-7-18 instead of 5-5-4-15, but it booted. ALLEN
I have X38-DQ6 with Xeon 3350 (45 nm) , BIOS F8. No problem with the voltage set to auto.Vcore set to 1.14 (no OC 2.66 GHz ) or 1.18 (3.2 GHz OC) - on Auto.Quote:
Originally Posted by Buggalugs
Anyone with a 45 nm CPU, use RealTemp from here:
http://www.xtremesystems.org/forums/....php?p=2809778
For checking temperature (works now in Vista x64). CoreTemp and Everest shows 10 C more ( wrong Tjmax most likely, as intel keeps this "secret").
Thanks, now my temperatures seem "normal"
Quote:
Originally Posted by adit
OK, must be something with my board.
My setting (for now).
I need some suggestions here.
I can do 4.3Ghz at 1.36v (1.40v in bios) stable. I have water cooling now, i need to update my sig.
However, i can't seem to get anything above that. I tried 4.39ghz up to 1.5v in bios, still a no-go. I have set the FSB and MCH voltage to +0.1v. Nothing helps.
Anyone think of something i can try?
Quote:
Originally Posted by ThatGuy16
Other than changing straps etc i dont know but how is performance with Xfire 3870? I have 1 3870 and im thinking about getting another. How does it perform in Crysis etc? I'm so impressed with the image quality of 3870 vs Nvidia cards, but it struggles in Crysis a little so does the second card really make a difference.?
i think the drivers still need improving for Crysis, but on High, DX10, 1680X1050, i get 45fps i think on the benchmark. I'm very impressed, i get about 80-90% increase in FPS in most of my games.
Wow im going back for a second one then. X38 and 2 3870's is a cheap way to get high end performance and the image quality is so much better, i was surprised how much better it looks than a Nvidia card.Quote:
Originally Posted by ThatGuy16
WOW, Nvidia plan to charge for drivers:
http://www.tweaktown.com/articles/13...ion/index.html
The new drivers work for ATI 38XX series to but $50 US a year for drivers??. The price we pay for the cards should cover that.
HAHA nevrmind its an April fools thing apparently...wow they did 10 pages for this
Are you kidding?Everyone says there's a«practically no difference between ATI and Nvidia and you say that?What we're you previous GeForce?Since the 8 series the image quality is basically the sameQuote:
Originally Posted by Buggalugs
Thats BS mate. Ive had 8800's and the 3870 looks waaaay better. I thought so to until i got one.Quote:
Originally Posted by DMH
8800 GT is definately faster though. I guess its the payoff for extra speed.
Realtek 889A codec drivers, version 1.90 (not April Fools):
http://www.realtek.com.tw/downloads/...&GetDown=false
Quote:
Originally Posted by ThatGuy16
try looser ram timings. to get up to 4.6 i needed 1.575 in bios (1.52 actual) so you may acutally need a bit more voltage. If your on water I wouldnt worry about putting bios setting a little above 1.5 (up to 1.55 max for 24/7 i would say)