EP45-UD3P

Printable View

Show 100 post(s) from this thread on one page

02-10-2009, 12:58 PM
fatguy1992

Its working so far :)

I don't think its stable.

BTW I forgot to say i have a C0 E8500.
02-10-2009, 02:11 PM
Touche

Quote:

Originally Posted by Leeghoofd

Sure mate :

PHP Code:

Intelligent Tweaker(M.I.T.) Robust Graphics Booster ...............: Auto CPU Clock Ratio .......................: 8 CPU Frequency .........................: 4.0GHz (500X8) Clock Chip Control Standard Clock Control CPU Host Clock Control.................: [Enabled] CPU Host Frequency (Mhz) ..............: 500 PCI Express Frequency (Mhz) ...........: 100 C.I.A.2 ...............................: [Disabled] Advanced Clock Control CPU Clock Drive........................: 700 PCI Express Clock Drive................: 700 CPU Clock Skew (ps)....................: 100ps MCH Clock Skew (ps)....................: 50ps DRAM Performance Control Performance Enhance....................: Turbo Extreme Memory Profile (X.M.P.)........: Disabled (G)MCH Frequency Latch.................: AUTO System Memory Multiplier ..............: 3.20B Memory Frequency (Mhz) ................: 1600MHz Standard Timing Control CAS Latency Time.......................: 8 tRCD ..................................: 8 tRP'...................................: 8 tRAS...................................: 24 Advanced Timing Control Everything In Advanced Timing Control on auto besides PL at 8 Motherboard Voltage Control CPU Load-Line Calibration..................: [Enabled] CPU Vcore..............................: 1.33125 CPU Termination........................: 1.24 CPU PLL................................: 1.50 CPU Reference..........................: 0.785 MCH/ICH MCH Core...............................: 1.34 Reference..............................: 0.745 MCH/DRAM Ref...........................: 0.860 ICH I/O................................: 1.5 ICH Core...............................: 1.1 DRAM DRAM Voltage...........................: 1.720 DRAM Termination ......................: 0.860 Channel A Reference....................: 0.860 Channel B Reference ...................: 0.860

CPU has a FSB wall at 540FSB, rig posts ( till 560FSB) but after the bios, all goes black lol Tried it on the the Asus mobo same story... but not a bad CPU for 100 euro's...

It's official, my e7300 is a dud :) I just can't get it IBT stable at 4 GHz. :( I've tried vcore up to 1.45625v but still no success. I'll have to settle with 3.75 GHz.

Quote:

Originally Posted by fatguy1992

Could someone please tell me whats wrong with these settings? I'm not looking for it to be stable, but able to run some benchmarks.

Code:

Robust Graphics Booster ...............: Auto CPU Clock Ratio .......................: 9.5 CPU Frequency .........................: 4.5GHz (475X9.5) Clock Chip Control Standard Clock Control CPU Host Clock Control.................: [Enabled] CPU Host Frequency (Mhz) ..............: 475 PCI Express Frequency (Mhz) ...........: 100 C.I.A.2 ...............................: [Disabled] Advanced Clock Control CPU Clock Drive........................: Default PCI Express Clock Drive................: Default CPU Clock Skew (ps)....................: 0ps MCH Clock Skew (ps)....................: 0ps DRAM Performance Control Performance Enhance....................: Turbo Extreme Memory Profile (X.M.P.)........: Disabled (G)MCH Frequency Latch.................: 400MHz System Memory Multiplier ..............: 2.00D Memory Frequency (Mhz) ................: 950MHz Standard Timing Control CAS Latency Time.......................: 5 tRCD ..................................: 5 tRP'...................................: 5 tRAS...................................: 15 Advanced Timing Control Everything In Advanced Timing Control on auto. Motherboard Voltage Control CPU Load-Line Calibration..................: [Enabled] CPU Vcore..............................: 1.525v CPU Termination........................: 1.30v CPU PLL................................: 1.57v CPU Reference..........................: 0.823 or 0.863 MCH/ICH MCH Core...............................: 1.3 Reference..............................: 0.823 or 0.863 MCH/DRAM Ref...........................: 1 ICH I/O................................: 1.5 ICH Core...............................: 1.1 DRAM DRAM Voltage...........................: 2.0 DRAM Termination ......................: 1 Channel A Reference....................: 1 Channel B Reference ...................: 1

I'v never used a dual before, so i'm having trouble getting it work. BTW my BIOS is F4.

Try lower MCH ref with those settings and 1.26 MCH.
02-10-2009, 02:39 PM
Leeghoofd

Quote:

Originally Posted by Touche

It's official, my e7300 is a dud :) I just can't get it IBT stable at 4 GHz. :( I've tried vcore up to 1.45625v but still no success. I'll have to settle with 3.75 GHz.

I don't run IBT on this CPU, it's far too hot ( already in the 60°C with just prime ) IBT is nice for a few runs, but people exagerate and hardware will fail in due time to just get a lousy screenshot that it is/was stable

Look here one of the victims ( the programmer himself ), now we need to find out what has happened ( TIM or Core/IHS issue)

IBT is NOT GOOD FOR YA HARDWARE
02-10-2009, 03:29 PM
radaja

well i dont know if its my new power supply or if i was just rushing when i first started trying to clock my 9650 but now i am able to lower these volts even more.so either way i am happy.
http://i40.tinypic.com/2nsc13p.jpg
02-10-2009, 04:30 PM
Touche

Quote:

Originally Posted by Leeghoofd

I don't run IBT on this CPU, it's far too hot ( already in the 60°C with just prime ) IBT is nice for a few runs, but people exagerate and hardware will fail in due time to just get a lousy screenshot that it is/was stable

IBT is good for a quick stability test. I don't want to Prime for hours every time I change a setting. Couple of minutes for 10 run IBT and if it passes that I can leave it overnight priming. I've saved days this way.

Quote:

Look here one of the victims ( the programmer himself ), now we need to find out what has happened ( TIM or Core/IHS issue)

IBT is NOT GOOD FOR YA HARDWARE

Why do you think his problem is IBT related? Isn't Core architecture quite resistant to abuse, throttling when needed and such?
02-10-2009, 04:39 PM
clo007

Quote:

Originally Posted by Oztopher

Ok, thanks guys :)

Only thing is, i'm getting the UD3R version of the board, which is only the on the F4 BIOS. But looking at the description (which isn't alot) It's the same as the F5 for the UD3P... Hmmm, either way i'll get the UD3R, hoping they'll come out with better BIOS'es in the near future.

My only guess to why they're bringing out BIOS'es faster for the UD3P, is 'cos they know it's more popular?

Cheers,
Oz

EDIT: oh, and i'm gona have a PC3-12800 CAS7 OCZ kit, hopefully i'll be able to run 1800 with CAS8 :S

Actually the latest bios is f6 for the UD3R
02-10-2009, 05:06 PM
Oztopher

Quote:

Originally Posted by clo007

Actually the latest bios is f6 for the UD3R

I was talking about EP45T-UD3R, the DDR3 version of the board ;)
02-10-2009, 06:55 PM
clo007

aaah gotcha.
02-10-2009, 09:31 PM
mattlyall06

LLC - load line calibration

whats the deal? safe or unsafe? is it just a matter of personal opinion, or are there people who have actually fried their chip from voltage spikes under load? if i understand correctly, llc compensates for vdroop, basically by spiking voltage.... ?

thoughts?
02-10-2009, 09:47 PM
fatguy1992

I have LLC enabled and personally I like it, it makes it way easier to stabilize the OC (well for me it does).
02-10-2009, 10:01 PM
Mean Machine

I'm through with this board now.
http://valid.canardpc.com/cache/screenshot/504368.png

Even one MHz FSB higher and it shuts down...

http://valid.canardpc.com/show_oc.php?id=504368
02-10-2009, 10:07 PM
fatguy1992

Nice work :clap:

Is that stable?

Could u please post ur settings?
02-10-2009, 10:12 PM
radaja

very nice mean machine.but has it occured to you that the cpu wont go any higher(hit its limit).i bet if you set the multiplier to 8.5 or 9 you could get a little higher fsb.hell even 8 and you could probally go alot higher.any ways great job with that clock
02-10-2009, 10:31 PM
Mean Machine

Quote:

Originally Posted by radaja

very nice mean machine.but has it occured to you that the cpu wont go any higher(hit its limit).i bet if you set the multiplier to 8.5 or 9 you could get a little higher fsb.hell even 8 and you could probally go alot higher.any ways great job with that clock

I have the same limit with three separate CPU's regardless of multipliers. I'll see if I can give you my settings later on, but I promise you, they aren't pretty. It was 1.52V MCH and 0.93 in MCH ref or so.

550MHz FSB isn't particularly stable (once again, regardless of CPU frequency, multiplier, MCH voltage, straps, you name it I tried it), but it works for Pi 1M if you're lucky. If you need stability, about 525 is where I need to be. It just doesn't work well enough for me, the board keeps :banana::banana::banana::banana::banana:ing all the time, I've spent tens of hours getting it stable, but over 525 it's just not that.
02-10-2009, 11:48 PM
Leeghoofd

What's so fab on 552FSB and a CPU-Z screenie ? His CPU speed is mad for air or water ( but with extreme cooling is average ) Would love to see a 32MB run... as taking a CPU-Z, 1Mb run screenie takes one minute of stability in windows... don't get too easily arroused guys lol
02-11-2009, 02:39 AM
Mean Machine

Quote:

Originally Posted by Leeghoofd

What's so fab on 552FSB and a CPU-Z screenie ?

My thoughts exactly. That's why I wrote "I'm through with this board", since it doesn't do anything better than the 552MHz FSB no matter how I try. :)
02-11-2009, 02:44 AM
Rattle

try a diff cpu dude, only take me 1.3625 cpu volts, 1.26 vtt, 1.3 NB with refs at .768 and .758 to do 550 prime blend and 3d stable....
02-11-2009, 04:18 AM
Mean Machine

Already tried an E7200 which behaved exactly the same on the board, regardless of voltages.
02-11-2009, 04:24 AM
BuGjAE

@ Rattle ,What's your board Revision? 1.0 or 1.1 550x8 is the greastest clock that my Cpu can do but seem no possible with this board ??
Any way could you post yr full BIOS setting ?
02-11-2009, 06:36 AM
radaja

well i was able to get it somewhat stable a while back at 556fsb.so it can be done
http://www.xtremesystems.org/forums/...&postcount=991
02-11-2009, 07:22 AM
xbiusx

Quote:

Originally Posted by radaja

well i was able to get it somewhat stable a while back at 556fsb.so it can be done
http://www.xtremesystems.org/forums/...&postcount=991

Nice OC, left only the ET6 settings or BIOS settings, could you post it?
02-11-2009, 07:51 AM
BuGjAE

Very Nice radaja, ask some Question I notice that my 12+ Volt Rail is alway below 12.00 It's around 11.87-11.92 in ET6 And never go above 12.00
. Is this something wrong with my mobo? I see you have alway over 12.00 that u show ur post in the past.

Note: I use Enermax 460 Watt for my system and everything run up as usual.
02-11-2009, 10:10 AM
radaja

BuGjAE,from what i understand its better to have a single rail psu.with my antec 550W psu it was multiple rails and my 12v would always go from 12.30 to 11.30 under load,it seem to stay in the 12.49 to11.98 while doing large fft's but when it got to the small fft's it would drop to 11.98 to 11.39 area.but now that ive change my psu to the PC-Power&cooling 500W with a single 12v rail,even using my quad i have yet to see my 12v line drop below 12.11,its usually at 12.51 to 12.49 under load.and it seems that having a very stable single 12v rail with high amperage allows me to run my quad with much lower vcore.i assume it because there are less flucuations in the vcore that is being supplied.
02-11-2009, 10:42 AM
Navigator1

Hello...

...is some new bios out there for the EP45T-UD3P DDR3 Board???

I have now F4

...thx
02-11-2009, 10:45 AM
Leeghoofd

F5 mate : EP45T UD3P F5 Bios

Show 100 post(s) from this thread on one page

** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P

Official Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P