info thread

Printable View

Show 100 post(s) from this thread on one page

06-04-2007, 01:04 AM
zsamz_

Quote:

Originally Posted by Richard Dower

Detailed P35-DQ6 review, they only reached 482FSB:

http://www.pcstats.com/articleview.cfm?articleID=2118

I'm staring to think it could veyr well be CPU limitations.

i hit 500fsb still testing
my e6400 hit 3.5 i'm sure can go even higher temps 46 idle
memory @1000mhz 5-5-5-15
16 seconds in superpi 1m
sweet board
06-04-2007, 02:07 AM
Tutti-frutti

Quote:

Originally Posted by gooface

i have a question, other than the DDR3 what does the DDR3 ver of the DS3R have over the non DDR3 version? because theres like a $50 difference in price, or is the DS3P worth getting over the DS3R performance and OC wise?

DDR3 is the only difference. Here are the differences between all the P35-boards (Dutch). The P35T-boards are not in it, but the only differences with the non-T versions are the DDR3-slots instead of DDR2-slots.

I think the DS3P will be a little better in overclocking, because it has better cooling.
06-04-2007, 02:30 AM
yenclas

Quote:

Originally Posted by hiwa

Gigabyte GA-P35-DS4
E6600 B2 L6 28
G.skill HZ 6400
Ybris cooling

3600 400x9 vcore 1.4
http://i16.tinypic.com/52yfx8y.png

3780 430x9 vcore 1.5

http://i13.tinypic.com/624r05z.png
4000 444x9 vcore 1.6
http://i13.tinypic.com/62r89ci.png

fsb 500 OCLABS KIT

http://i18.tinypic.com/6gu16yc.png

FSB 505 CON YBRIS KIT (YBRIS ONE,120 X2)
http://i7.tinypic.com/52kmrv5.png

Sandra Memory Tests
5-5-5-5 1000 3600

http://www.pctuner.info/up/results/_...5510003600.jpg

4-4-4-4 1000 3600

http://www.pctuner.info/up/results/_...4410003600.jpg

5-5-5-5 1100 3520

http://www.pctuner.info/up/results/_...5511003520.jpg

4-4-4-4 1100 3520

http://www.pctuner.info/up/results/_...4411003520.jpg

EVEREST MEMORY LATENCY TESTS

5-5-5-5 1000 3600

http://www.pctuner.info/up/results/_...5100036000.jpg

4-4-4-4 1000 3600

http://www.pctuner.info/up/results/_...4410003600.jpg

5-5-5-5 1100 3520

http://www.pctuner.info/up/results/_...5511003520.jpg

4-4-4-4 1100 3520

http://www.pctuner.info/up/results/_...4411003520.jpg

5-5-5-5 1000 500x7 1.55 vcore

http://www.pctuner.info/up/results/_...5510003500.jpg

4-4-4-4 1000 500x7 1.55 vcore

http://www.pctuner.info/up/results/_...4410003500.jpg

5-5-5-5 1000 500x7 1.55 vcore sandra cpu bench

http://www.pctuner.info/up/results/_...5551000cpu.jpg

Hello Hiwa.

Can you post all your memory timmings to do 500 FSB with GSKILL HZ's ?

Thank you very much !
06-04-2007, 05:13 AM
hiwa

Quote:

Originally Posted by yenclas

Hello Hiwa.

Can you post all your memory timmings to do 500 FSB with GSKILL HZ's ?

Thank you very much !

Last 3 tests
06-04-2007, 05:54 AM
megatron

Since this is an "bios/info" thread I will post my findings here. I read a review at legionhardware that the xp-120 fitted with the crazy cool stuff. It does after u remove the backplate and twist the crazy cool heatpipe to clear the heatsink:http://img504.imageshack.us/img504/7...1279dh5.th.jpg
06-04-2007, 06:36 AM
yenclas

Quote:

Originally Posted by hiwa

Last 3 tests

Thanks Hiwa,

but I refer to advanced timmings in Bios when Press Ctrl+F1.

Can you post your voltage settings in bios too ?

Sorry, but I can't do more than 490 FSB.

Do you think that 2,45 of vdimm isn't dangerous ?

Thanks !!!
06-04-2007, 09:52 AM
hiwa

Quote:

Originally Posted by yenclas

Thanks Hiwa,

but I refer to advanced timmings in Bios when Press Ctrl+F1.

Can you post your voltage settings in bios too ?

Sorry, but I can't do more than 490 FSB.

Do you think that 2,45 of vdimm isn't dangerous ?

Thanks !!!

http://www.pctuner.info/up/results/_...5_DSCN0396.jpg
http://www.pctuner.info/up/results/_...4_DSCN0397.jpg

http://www.pctuner.info/up/image.php...04195411_1.gif
06-04-2007, 10:09 AM
lowfat

2.45Vdimm is a lot, definately for 24/7.
06-04-2007, 10:18 AM
hiwa

Quote:

Originally Posted by lowfat

2.45Vdimm is a lot, definately for 24/7.

hmmfor daily yes , gkill hz with aircooling for bench, i tried 1200 with 2.45

on giga boards +0.50 mean 2.30 vdimm yenclas
06-04-2007, 11:57 AM
megatron

Quote:

Originally Posted by hiwa

http://www.pctuner.info/up/results/_...5_DSCN0396.jpg
http://www.pctuner.info/up/results/_...4_DSCN0397.jpg

http://www.pctuner.info/up/image.php...04195411_1.gif

Hi Hiwa, does high vcore help with fsb speeds? Since your core clock is relatively modest (3Ghz) and you use 1.6v vcore.
06-04-2007, 01:14 PM
hiwa

Quote:

Originally Posted by megatron

Hi Hiwa, does high vcore help with fsb speeds? Since your core clock is relatively modest (3Ghz) and you use 1.6v vcore.

I think i can't boot at 500x7 with 1.5 vcore but i can boot 420x9 with same vcore :up:
06-04-2007, 02:15 PM
lowfat

Here is what i use for 24/7 for my FSB.
http://i18.photobucket.com/albums/b1...isc/515MHz.jpg
This is 4 sticks of ram too. I quite enjoy this motherboard.
06-04-2007, 05:32 PM
Richard Dower

Two new reviews of the P35-DS3R:

http://www.legitreviews.com/article/513/1/

http://www.bit-tech.net/hardware/200..._ga-p35-ds3r/1
06-04-2007, 05:33 PM
Richard Dower

Lowfat....why not use a 7x multi?...your SuperPi score would go way up.
06-04-2007, 06:22 PM
lowfat

Quote:

Originally Posted by Richard Dower

Lowfat....why not use a 7x multi?...your SuperPi score would go way up.

I do use a 7X multi generally. I was just testing to make sure that FSB was stable first.
06-04-2007, 08:03 PM
dt744190

I just recently got P35 DQ6 and Ballistix Tracer 8500. But having alot troubles with the memory.
BIOS F3: Default settings 800 2:3 5-5-5-18 1.8 volt
BIOS F4: Default settings 1066 1:2 5-7-7-24 2.2 volt

I can't run Memtest86+ v1.70, Memtest 3.2, Orthos Blendtest without my computer hangs up.
With F3 BIOS at default settings, I can run all the tests without problem, but when set manually to 1:2 to run it at 1066 Mhz 2.2-2.40 volt and the freezing came back.

Can stresstest the CPU, even with OC to 3.2 Ghz without any problem and it's the Tracer I having alot problem with.

Thought I got faulty modules, but with BIOS F3: Default settings 800 2:3 5-5-5-18 1.8 volt and 4 Pass without any errors reported. It doesn't lokes like it's faulty modules I got and I got no idea what's wrong here.

Everything in BIOS is set to default settings, all Eist etc is disabled and trying with both Auto/manual set the RAM settings too find the problem with all the freezings.

With Everest BETA 4.0.0 it reports:
Northbridge: 1.25 volt
Southbridge: 1.05 volt

Aren't this too low?
06-05-2007, 04:40 AM
KoeiNL

Anyone knows if the Tuniq fits on the mobo? (The DS4)
06-05-2007, 11:58 AM
dcode2006

P35 DQ6 owners on here are saying that the F4 bios is crap compared to F3 in mem scores, how much worse off is it ? and anyone know whats improved in F4 over F3 according to Gigabyte. Thanx.
06-05-2007, 01:16 PM
megatron

Quote:

Originally Posted by KoeiNL

Anyone knows if the Tuniq fits on the mobo? (The DS4)

Pretty sure Ive seen a pic with the Tuniq facing up and fitting with the crazy cool heatsinks.
06-05-2007, 03:52 PM
megatron

Why cant I install the intel storage matrix driver? It says my system is not up to spec. When I change the bios options from IDE mode to AHCI or Raid mode, I get blue screen on boot up. Catch 22?
06-05-2007, 04:15 PM
CERO

Quote:

Originally Posted by megatron

Why cant I install the intel storage matrix driver? It says my system is not up to spec. When I change the bios options from IDE mode to AHCI or Raid mode, I get blue screen on boot up. Catch 22?

Are u running vista? if so take a look at this, got this from Asus P5k deluxe thread:

Quote:

Originally Posted by Tommy L

About that ich9r raid issue.. I found out that it is the intel matrix driver issue. it is a fix\workaround awailable @ http://www.station-drivers.com/telec...el/msm7.5.html

mid page... Possible Issues with Intel® RAID and Window Vista....

read and do the reg modification. worked for me. i have not installed the intel matrix windows app. just the chipset driver.
06-05-2007, 04:22 PM
megatron

Quote:

Originally Posted by mc2k

Are u running vista? if so take a look at this, got this from Asus P5k deluxe thread:

Im running windows xp pro 64-bit atm. Just wanted to test if there was any speed benifit or else with installing the intel matrix storage driver.
06-05-2007, 11:44 PM
AcUaViVa

one noob question

is posible tu insert ICH9R Driver in windows xp? without floppy of curse.

thanks
06-06-2007, 09:37 AM
Richard Dower

Quote:

Originally Posted by AcUaViVa

one noob question

is posible tu insert ICH9R Driver in windows xp? without floppy of curse.

thanks

Yes, slipstream using nlite...Google :)
06-06-2007, 09:38 AM
Richard Dower

New Realtek 8111B LAN driver, June 4th 2007:

http://www.realtek.com.tw/downloads/...&GetDown=false

Show 100 post(s) from this thread on one page