** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P

Quote:

Originally Posted by fatguy1992

Everest and ET6 both report NB temps, but they are different :confused:

sorry fatguy, but where can i find on ET6 or everest?

ET6 is easy tune 6 it comes with the mobo and just google "download everest" and download a trail of the latest version.

Quote:

Originally Posted by redrumy3

hmm right now im trying 3.6ghz on Q6600 i know i can do it just trying different voltage, now is Load-Line Calibration bad to have on enabled?

Heres my template for a Q6600 on a UD3P.

Code:

MB Intelligent Tweaker(M.I.T.) Robust Graphics Booster ...............: Auto CPU Clock Ratio .......................: 9 CPU Frequency .........................: 3.6GHz (400X9) Clock Chip Control Standard Clock Control CPU Host Clock Control.................: [Enabled] CPU Host Frequency (Mhz) ..............: 400 PCI Express Frequency (Mhz) ...........: 100 C.I.A.2 ...............................: [Disabled] Advanced Clock Control CPU Clock Drive........................: Default PCI Express Clock Drive................: Default CPU Clock Skew (ps)....................: 0ps MCH Clock Skew (ps)....................: 0ps DRAM Performance Control Performance Enhance....................: Standard Extreme Memory Profile (X.M.P.)........: Disabled (G)MCH Frequency Latch.................: 400MHz System Memory Multiplier ..............: 2.0D Memory Frequency (Mhz) ................: 800MHz DRAM Timing Selectable ................: Standard Timing Control CAS Latency Time.......................: 5 tRCD ..................................: 5 tRP'...................................: 5 tRAS...................................: 15 Advanced Timing Control Everything In Advanced Timing Control on auto. Motherboard Voltage Control CPU Load-Line Calibration..................: [Enabled] CPU Vcore..............................: 1.45 CPU Termination........................: 1.3V CPU PLL................................: 1.50V CPU Reference..........................: 0.823 to 0.863 MCH/ICH MCH Core...............................: 1.2V Reference..........................: 0.823 to 0.863 MCH/DRAM Ref...........................: 1.0v ICH I/O................................: 1.5V ICH Core...............................: 1.100V DRAM DRAM Voltage...........................: 2.0v DRAM Termination ......................: 1.0v Channel A Reference....................: 1.0v Channel B Reference ...................: 1.0v

Let me know if that works.

Quote:

Originally Posted by fatguy1992

Heres my template for a Q6600 on a UD3P.

Code:

MB Intelligent Tweaker(M.I.T.) Robust Graphics Booster ...............: Auto CPU Clock Ratio .......................: 9 CPU Frequency .........................: 3.6GHz (400X9) Clock Chip Control Standard Clock Control CPU Host Clock Control.................: [Enabled] CPU Host Frequency (Mhz) ..............: 400 PCI Express Frequency (Mhz) ...........: 100 C.I.A.2 ...............................: [Disabled] Advanced Clock Control CPU Clock Drive........................: Default PCI Express Clock Drive................: Default CPU Clock Skew (ps)....................: 0ps MCH Clock Skew (ps)....................: 0ps DRAM Performance Control Performance Enhance....................: Standard Extreme Memory Profile (X.M.P.)........: Disabled (G)MCH Frequency Latch.................: 400MHz System Memory Multiplier ..............: 2.0D Memory Frequency (Mhz) ................: 800MHz DRAM Timing Selectable ................: Standard Timing Control CAS Latency Time.......................: 5 tRCD ..................................: 5 tRP'...................................: 5 tRAS...................................: 15 Advanced Timing Control Everything In Advanced Timing Control on auto. Motherboard Voltage Control CPU Load-Line Calibration..................: [Enabled] CPU Vcore..............................: 1.45 CPU Termination........................: 1.3V CPU PLL................................: 1.50V CPU Reference..........................: 0.823 to 0.863 MCH/ICH MCH Core...............................: 1.2V Reference..........................: 0.823 to 0.863 MCH/DRAM Ref...........................: 1.0v ICH I/O................................: 1.5V ICH Core...............................: 1.100V DRAM DRAM Voltage...........................: 2.0v DRAM Termination ......................: 1.0v Channel A Reference....................: 1.0v Channel B Reference ...................: 1.0v

Let me know if that works.

awesome, going to give it a try now, i know i can do 3.6 did it on ip35 but this board bios is really different :P
thanks

Quote:

Originally Posted by redrumy3

hmm right now im trying 3.6ghz on Q6600 i know i can do it just trying different voltage, now is Load-Line Calibration bad to have on enabled?

Better to leave it disabled if you can.

Quote:

Originally Posted by Phunky Phish

Hey
Anyone had a chance to look over my settings on page 72?

Its the big post as I dont know how to use frames!

Cheers guys, I just need a little help :)

I've answered that one. As for the temperatures, many new Core 2 CPUs have stuck sensors up until certain temp. You can use Tcase temp instead (HWMonitor, OCCT, Everest...).

i have an e8600 well capable of excess of 5.9ghz....

what bios is best for 24/7 and which is best for high fsb?? i havent checked out all the bios, and was wondering id one was better as i am presently on F5

Quote:

Originally Posted by Touche

Better to leave it disabled if you can.

LLC is fine to use on 65nm.

hmm well for now i will leave it off to see what happens cause right now i have 1.55v in bios in windows it shows 1.50v under load it goes to 1.440v-1.45v so if this is stable then im fine, on my ip35 pro it took 1.45v for 3.6 so i hope this is fine :) i do like the board though over my abit :D i also put mch to 1.3v figured i might since im using 4 sticks of ram which is 8gb

but i think i need to ditch my ocz psu and grab a single rail corsair, just need to wait for money ocz is about 3 years old =]

Quote:

Originally Posted by Touche

I've answered that one. As for the temperatures, many new Core 2 CPUs have stuck sensors up until certain temp. You can use Tcase temp instead (HWMonitor, OCCT, Everest...).

Sorry Touche, I had 2 posts on that page.

Should have said look at my Bios settings!

Will edit now :up:

Page 72 #1799

Try LLC disabled and adjust vcore a bit if necessary.

Maybe set these yourself, instead of auto:

MCH/DRAM Ref...........................: [0.96] <===
ICH I/O................................: [1.500] <===
ICH Core...............................: [1.100] <===

You could try tweaking memory a bit with performance enhance Turbo and 266/333 memory straps, but it's not that important and you can leave it as it is if you want.

If you want to push it to its limits, look at Jor3lBR's template and go from there.

got a question,in prime95,if core 4 fails after one minute of blend what is the most likely cause?is it more vcore?or would it be mch? or something else? thanks

Quote:

Originally Posted by Touche

Try LLC disabled and adjust vcore a bit if necessary.

Maybe set these yourself, instead of auto:

MCH/DRAM Ref...........................: [0.96] <===
ICH I/O................................: [1.500] <===
ICH Core...............................: [1.100] <===

You could try tweaking memory a bit with performance enhance Turbo and 266/333 memory straps, but it's not that important and you can leave it as it is if you want.

If you want to push it to its limits, look at Jor3lBR's template and go from there.

So you recommend taking them off auto and locking them to std values? I am at work so if those are higher a little I am sorry.

You mean these settings?
http://www.xtremesystems.org/forums/...postcount=1308
It being a 9650 wont make to much difference as mines a 9550 right?

in prime95 which fft size is cpu related and which is memory and NB related? thanks

Quote:

Originally Posted by Phunky Phish

So you recommend taking them off auto and locking them to std values?

Yes.

Quote:

You mean these settings?
http://www.xtremesystems.org/forums/...postcount=1308
It being a 9650 wont make to much difference as mines a 9550 right?

Those are the settings people have success with, but yours is 9550 an C1, so it maybe can't go as high.

Quote:

Originally Posted by radaja

in prime95 which fft size is cpu related and which is memory and NB related? thanks

Small : CPU
Blend : CPU, Ram and all the rest

so when first start prime95 using blend mode,the first set of test are small fft's?and if it fails right away,i need to up the vcore right? sorry for these stupid questions .thanks

Nope when you start blend it tests the rams and co first ( 1024K) when it passes there it goes to small and so on... first test the cpu with small ( as it can lead to fail the large test too ) and if the cpu is stable move on...

and mate there are no stupid questions, just stupid answers (and I'm the king of those lol)

thanks lee,that helps out alot.

Linpack is probably better for quick CPU testing. If it passes Linpack, go for Prime/OCCT blend/mix.

Quote:

Originally Posted by Touche

Those are the settings people have success with, but yours is 9550 an C1, so it maybe can't go as high.

I am happy with around 4Ghz.

Do you think with the multi on 7.5 I might make 533fsb and run the ram 1:1, or is that asking to much?

Currently using Arctic Ceramique with my ZeroTherm Zen120 right now. I just got a Scythe SFF21G fan to replace ZeroTherm stock fan and some Arctic Silver 5. Anyone think it will make a difference? Also, any tips for applying/using the AS5 paste? Thanks!

Quote:

Originally Posted by xbiusx

Hi, i need some advices to reach over 500 FSB, now i`m stable at 500x8 but my intentions are reach 530x8 or the max as i can. But my first attempts were frustrating. With 510x8 i got my CPU stable ran ORTHOS 1h small FTT and no errors. But blend test gave error before 1min, so there is some wrong with my settings about the memory. And please take a look and let me know what can i do.

http://i11.photobucket.com/albums/a1..._orthos_3h.jpg

Bios F7 settings

Code:

****** Gigabyte EP45 UD3P Bios F7 ****** E8500 500 X 8 4000MHz Robust Graphics Booster.........................[ Auto ] CPU Clock Ratio.................................[ 8 ] Fine CPU Clock Ratio............................[ 0 ] CPU Frequency 4.0GHz...........................[ 500 x 8 ] ******Clock Chip Control****** CPU Host Clock Control..........................[ Enabled ] CPU Host Frequency (Mhz)........................[ 510 ] PCI Express Frequency (Mhz).....................[ 100 ] C.I.A 2 [Disabled] ******Advanced Clock Control****** CPU Clock Drive.................................[ 800mv ] PCI Express Clock Drive.........................[ 900mv ] CPU Clock Skew..................................[ 0ps] MCH Clock Skew..................................[ 0ps ] ******DRAM Performance Control****** Performance Enhance.............................[ Standard ] Extreme Memory Profile (XMP)....................[ Disabled ] (G) MCH Frequency Latch.........................[ 400MHz ] System Memory Multipler.........................[ 2.00D ] Memory Frequency 1066...........................[ 1000 ] DRAM Timing Selectable..........................[ Manual ] CAS Latency Time................................[ 5 ] Tried auto tRCD............................................[ 5 ] Tried auto tRP.............................................[ 5 ] Tried auto tRAS............................................[ 18 ] Tried auto ******Advanced Timing Control****** tRRD............................................[ 4 ] [Auto] tWTR............................................[ 4 ] [Auto] tWR.............................................[ 8 ] [Auto] tRFC............................................[ 68 ] [Auto] Tried 54 ~ 72 tRTP............................................[ 4 ] [Auto] Command Rate (cmd)..............................[ 2T ] ******Channel A Timing Settings****** Static tRead Value [ 11 ] ................[ 9 ] Tried 9,10,11,12 tRD Phase0 Adjustment [ 1 ] ................[ Auto ] tRD Phase1 Adjustment [ 0 ] ................[ Auto ] tRD Phase2 Adjustment [ 0 ] ................[ Auto ] tRD Phase3 Adjustment [ 0 ] ................[ Auto ] tRD 2rd (Differnt Rank) [ 6 ] ................[ Auto ] tWR 2wr (Differnt Rank) [ 6 ] ................[ Auto ] tWR 2rd (Differnt Rank) [ 5 ] ................[ Auto ] tRD 2wr (Same/Difft Rank) [ 8 ] ................[ Auto ] Dimm 1 Clock Skew Control.......................[ Auto ] Dimm 2 Clock Skew Control.......................[ Auto ] DDR Write Training..............................[ Auto ] ******Channel A Driving Settings****** Drive Strength Profile..........................[ Auto ] Data Driving Pull Up Level......................[ Auto ] cmd Driving Pull Up Level.......................[ Auto ] ctrl Driving Pull Up Level......................[ Auto ] clk Driving Pull Up Level.......................[ Auto ] Data Driving Pull Down Level....................[ Auto ] cmd Driving Pull Down Level.....................[ Auto ] ctrl Driving Pull Down Level....................[ Auto ] clk Driving Pull Down Level.....................[ Auto ] ******Channel B Timing Settings****** Static tRead Value [ 11 ] ................[ 9 ] tRD Phase0 Adjustment [ 0 ] ................[ Auto ] tRD Phase1 Adjustment [ 0 ] ................[ Auto ] tRD Phase2 Adjustment [ 0 ] ................[ Auto ] tRD Phase3 Adjustment [ 0 ] ................[ Auto ] tRD 2rd (Differnt Rank) [ 6 ] ................[ Auto ] tWR 2wr (Differnt Rank) [ 6 ] ................[ Auto ] tWR 2rd (Differnt Rank) [ 5 ] ................[ Auto ] tRD 2wr (Same/Difft Rank) [ 8 ] ................[ Auto ] Dimm 1 Clock Skew Control.......................[ Auto ] Dimm 2 Clock Skew Control.......................[ Auto ] DDR Write Training..............................[ Auto ] ******Channel B Driving Settings****** Drive Strength Profile..........................[ Auto ] Data Driving Pull Up Level......................[ Auto ] cmd Driving Pull Up Level.......................[ Auto ] ctrl Driving Pull Up Level......................[ Auto ] clk Driving Pull Up Level.......................[ Auto ] Data Driving Pull Down Level....................[ Auto ] cmd Driving Pull Down Level.....................[ Auto ] ctrl Driving Pull Down Level....................[ Auto ] clk Driving Pull Down Level.....................[ Auto ] ******Motherboard Voltage Control****** Load-Line Calibration...........................[ Disabled ] CPU Vcore [ 1.25000 ]...................[ 1.36250 ] Tried 1.37500~1.38250 CPU Termination [ 1.20 ]...................[ 1.28 ] Tried 1.30 CPU PLL [ 1.50 ]...................[ 1.5000 ] CPU Reference [ 0.760 ]...................[Normal ] MCH Core [1.100 ]...................[ 1.400 ] Tried 1.420 MCH Reference [0.760 ]...................[ ? ] Tried 0.700 ~0.760 (ET6) MCH/DRAM Refernce [0.900 ]...................[ Normal ] ICH I/O [1.500 ]...................[ 1.500 ] ICH Core [1.100 ]...................[ 1.100 ] DRAM Voltage [1.800 ]...................[ 2.060 ] Tried ~ 2.200 DRAM Termination [0.900 ]...................[ Normal ] Channel A Ref [0.900 ]...................[ Normal ] Channel B Ref [0.900 ]...................[ Normal ] ******Advanced BIOS Features****** Limit CPUID Max to 3............................[ Disabled ] No-Execute memory Protect.......................[ Enabled ] CPU Enhance Halt (CIE)..........................[ Disabled ] C2/C2E State Support............................[ Disabled ] C4/C4E State Support............................[ Disabled ] CPU Thermal Monitor.............................[ Disabled ] CPU EIST Function...............................[ Disabled ] Virtualization Technology.......................[ Enabled ] *******Integraed Peripherals****** Legacy USB Storage Detect.......................[ Disabled ]

Thanks!

Keeping my post to help understand my problem.

Quote:

Originally Posted by Touche

Try this and then go for lower volts/timings if it's stable:

Code:

****** Gigabyte EP45 UD3P Bios F7 ****** E8500 510 X 8 4080MHz Robust Graphics Booster.........................[ Auto ] CPU Clock Ratio.................................[ 8 ] Fine CPU Clock Ratio............................[ 0 ] CPU Frequency 4.0GHz...........................[ 510 x 8 ] ******Clock Chip Control****** CPU Host Clock Control..........................[ Enabled ] CPU Host Frequency (Mhz)........................[ 510 ] PCI Express Frequency (Mhz).....................[ 100 ] C.I.A 2 [Disabled] ******Advanced Clock Control****** CPU Clock Drive.................................[ 800mv ] PCI Express Clock Drive.........................[ 900mv ] CPU Clock Skew..................................[ 0ps] MCH Clock Skew..................................[ 0ps ] ******DRAM Performance Control****** Performance Enhance.............................[ Standard ] Extreme Memory Profile (XMP)....................[ Disabled ] (G) MCH Frequency Latch.........................[ 400MHz ] System Memory Multipler.........................[ 2.00D ] Memory Frequency 1066...........................[ 1000 ] DRAM Timing Selectable..........................[ Manual ] CAS Latency Time................................[ 5 ] tRCD............................................[ 5 ] tRP.............................................[ 5 ] tRAS............................................[ 18 ] ******Advanced Timing Control****** tRRD............................................[ 4 ] [Auto] tWTR............................................[ 4 ] [Auto] tWR.............................................[ 8 ] [Auto] tRFC............................................[ 54 ] [Auto] tRTP............................................[ 4 ] [Auto] Command Rate (cmd)..............................[ 2T ] ******Channel A Timing Settings****** Static tRead Value [ 11 ] ................[ Auto ] Try 12 also tRD Phase0 Adjustment [ 1 ] ................[ Auto ] tRD Phase1 Adjustment [ 0 ] ................[ Auto ] tRD Phase2 Adjustment [ 0 ] ................[ Auto ] tRD Phase3 Adjustment [ 0 ] ................[ Auto ] tRD 2rd (Differnt Rank) [ 8 ] ................[ Auto ] tWR 2wr (Differnt Rank) [ 8 ] ................[ Auto ] tWR 2rd (Differnt Rank) [ 7 ] ................[ Auto ] tRD 2wr (Same/Difft Rank) [ 9 ] ................[ Auto ] Dimm 1 Clock Skew Control.......................[ Auto ] Dimm 2 Clock Skew Control.......................[ Auto ] DDR Write Training..............................[ Auto ] ******Channel A Driving Settings****** Drive Strength Profile..........................[ Auto ] Data Driving Pull Up Level......................[ Auto ] cmd Driving Pull Up Level.......................[ Auto ] ctrl Driving Pull Up Level......................[ Auto ] clk Driving Pull Up Level.......................[ Auto ] Data Driving Pull Down Level....................[ Auto ] cmd Driving Pull Down Level.....................[ Auto ] ctrl Driving Pull Down Level....................[ Auto ] clk Driving Pull Down Level.....................[ Auto ] ******Channel B Timing Settings****** Static tRead Value [ 11 ] ................[ Auto ] Try 12 also tRD Phase0 Adjustment [ 0 ] ................[ Auto ] tRD Phase1 Adjustment [ 0 ] ................[ Auto ] tRD Phase2 Adjustment [ 0 ] ................[ Auto ] tRD Phase3 Adjustment [ 0 ] ................[ Auto ] tRD 2rd (Differnt Rank) [ 8 ] ................[ Auto ] tWR 2wr (Differnt Rank) [ 8 ] ................[ Auto ] tWR 2rd (Differnt Rank) [ 7 ] ................[ Auto ] tRD 2wr (Same/Difft Rank) [ 9 ] ................[ Auto ] Dimm 1 Clock Skew Control.......................[ Auto ] Dimm 2 Clock Skew Control.......................[ Auto ] DDR Write Training..............................[ Auto ] ******Channel B Driving Settings****** Drive Strength Profile..........................[ Auto ] Data Driving Pull Up Level......................[ Auto ] cmd Driving Pull Up Level.......................[ Auto ] ctrl Driving Pull Up Level......................[ Auto ] clk Driving Pull Up Level.......................[ Auto ] Data Driving Pull Down Level....................[ Auto ] cmd Driving Pull Down Level.....................[ Auto ] ctrl Driving Pull Down Level....................[ Auto ] clk Driving Pull Down Level.....................[ Auto ] ******Motherboard Voltage Control****** Load-Line Calibration...........................[ Disabled ] CPU Vcore [ 1.25000 ]...................[ 1.41250 ] CPU Termination [ 1.20 ]...................[ 1.30 ] CPU PLL [ 1.50 ]...................[ 1.5000 ] CPU Reference [ 0.760 ]...................[0.823 ] MCH Core [1.100 ]...................[ 1.400 ] MCH Reference [0.760 ]...................[ 0.783 ] Try 0.783-0.823 + step or two up MCH/DRAM Refernce [0.900 ]...................[ 1.100 ] ICH I/O [1.500 ]...................[ 1.500 ] ICH Core [1.100 ]...................[ 1.100 ] DRAM Voltage [1.800 ]...................[ 2.200 ] DRAM Termination [0.900 ]...................[1.100 ] Channel A Ref [0.900 ]...................[ 1.100 ] Channel B Ref [0.900 ]...................[ 1.100 ]

Didn`t work. I tried change one by one and when i changed DRAM termination i coundn`t boot... But i got better results than my first attemps, before i even ran 1 min on ORTHOS and now i run 7 min and got BSOD... So, there is something wrong yet

Quote:

Originally Posted by SpeedEuphoria

Its likely MCH ref or even MCH core that is holding you back. Run memtest and loop test #7. If you see tons of errors, raise the MCH core or even raise PL(static tRead) or your mem timings. If you get 1-2 errors in each pass then change the mch reff.

I just got my Q9650:up:, So far I need different MCH ref settings and likely cpu reff settings for sure. I dont have much time tonight but will be looking back through this thread to try some settings.

Memtest passed 5 loops and no errors with updated settings (view settings above) Rised MCH core, and PL and loose some mem timings but ORTHOS Blend dosent work...

And now what can i try?

@ Bluestang RE Artic 5 paste.

Check out the website for good instructions on how to apply

I clean both cpu and heatsink with Isopropyl 1st
Then apply some to the heat sink, spread it and wipe it off with a lint free cloth
Then apply a very small amount to heat sink and spread it using the edge of a clean credit card or similar so even amount over top of cpu
Then fit heat sink!

If its a new cpu/heatsink combo I always remove the heatsink after fitting to check contact over entire cpu surface. If not then its time to lap something!!
If good, refit. You wont need to apply anymore paste, but I always clean and start from scratch.

Quote:

Originally Posted by Phunky Phish

I am happy with around 4Ghz.

Do you think with the multi on 7.5 I might make 533fsb and run the ram 1:1, or is that asking to much?

Your ram and the board are definitely capable of 533 1:1. You can try it, but there won't be noticable performance difference compared to your current settings, especially if you tweak your memory timings a bit.

xbiusx:
Lower DRAM termination and refferences (incl. MCH dram ref) to 1.000. Change CPU Thermal Monitor to Enabled. Have you tried all of the MCH ref.? If so (incl. those two steps up), try even lower settings. Then try to lower your memory divider so it works around 800 MHz and see if it's stable then.

Quote:

Originally Posted by Phunky Phish

So you recommend taking them off auto and locking them to std values? I am at work so if those are higher a little I am sorry.

You mean these settings?
http://www.xtremesystems.org/forums/...postcount=1308
It being a 9650 wont make to much difference as mines a 9550 right?

Right, tried changing to these settings, wont boot into windows. It does the green bar then BSOD.

But the strange thing is I set it to the last clock that worked and all settings as post on pg 72 and it will not load windows, BSOD just after green bar.

Anyone any ideas?