MSI Special BIOS for for AMD 3 core to 4 core

Printable View

Show 100 post(s) from this thread on one page

08-11-2009, 10:39 PM
mav2000

Nope looks like its from MSI, anyway u have to flash using a USB stick in the bios or using afudos..in dos...I have found using the usb stick in bios to be really easy.
08-12-2009, 12:14 AM
Dopamin3

Quote:

Originally Posted by Cisco Kid

thanks for quick reply, is 1.8 a beta bios or direct from MSi, I have not followed bios much but now feel it is time to play around a bit and would not mind trying a X2 550 and see if I get lucky with a quad at 3.6 which will be same as my X2 920 basically

Second question is it work moving to the MSI AM3 board w 1333 or 1600 DDR3 over the DKA790GX Platinum I am now running w DDR2 1066 I am guessing that on eith platform I will hit a wall with a max overclock of the 550 at 3.9 just wondering how much faster it would be than the DDR2 platform running at 3.7 and would it be worth the little cost to move to. I would expect increased bandwidth but in day day usage would it be noticeable and would it be noticeable gaming w a pair of 3870's in Xfire at 1900x1200

IIRC 1.8 is a stable bios direct from MSI. You can find the 1.9 beta in the first post in the thread :up:
08-12-2009, 08:57 AM
lemonlime

Looking forward to trying the 1.5b4 BIOS. Thanks, Toppc!
08-12-2009, 11:36 AM
Cisco Kid

guys your thoughts

is it worth it at an extra cost after selling to go from my DDR2 based

dka79gx platinum
x4 920 at 3.6 (probably can do more have not bothered)
4gb Gskill PC8500

to a

790FX-GD70
AM3 X2 550 (hopes to unlock)
4gb 1600 DDR3

will the x2 550 perform as well at 3.6 vs the true quad overclocked to the same? second I guess there is the potential of no success unlocking depending on stepping I get for the 550 but being left with a dual core that will hopefully do 3.9

would it be smarter to leave what I have alone for a while and if anything drop a 955 into it later??

video card wise I will leave my crossfire 3870's in a bit longer before flogging them....
08-12-2009, 12:21 PM
shadow_419

Personally, I wouldn't do it if what you're looking for is increased performance. The increase you might gain (if the 550 unlocks) isn't worth any money you might have to add to make up the difference. If you need more speed try overclocking the cpu a little more. With what you have, I'd wait until the 8-series chipset boards roll out and then decide whether the move to AM3 is worth it.
08-12-2009, 05:43 PM
Dopamin3

http://img36.imageshack.us/img36/314/msiu.jpg

Keep up the good work MSI :up:
08-12-2009, 09:14 PM
MacClipper

Pardon me for not being up to date but which MSI AMD mobo can do both 550BE core unlocking and Prime95 Blend stable at the present moment? Seems all I see is the GD70.
08-12-2009, 09:27 PM
ah_khoo

Quote:

Originally Posted by MacClipper

Pardon me for not being up to date but which MSI AMD mobo can do both 550BE core unlocking and Prime95 Blend stable at the present moment? Seems all I see is the GD70.

790gx-g65 if i'm not mistaken. price wise just $SGD60 shy of GD70. :)
08-13-2009, 03:21 AM
RRunner

TOPPC,

I am waiting BIOS for 790gx-g65 !!

Coldboot also!:(
08-13-2009, 08:25 PM
Konjurer

Come on, Toppc, don't forget the 790GX-G65.... PLZ
08-14-2009, 08:04 AM
Cisco Kid

Quote:

Originally Posted by Konjurer

Come on, Toppc, don't forget the 790GX-G65.... PLZ

and the DKA790GX Platinum
08-14-2009, 07:31 PM
LittleKnown

Yes Please dont forget us ( owners of the DKA790GX Platinum )
I will be waiting
08-16-2009, 02:38 PM
Dopamin3

Quote:

Originally Posted by LittleKnown

Yes Please dont forget us ( owners of the DKA790GX Platinum )
I will be waiting

I sold my GD70 and am back on the DKA790GX Platinum.

How does 1.8 unlock? I saw it unlocked but didn't run any stability tests. Is this bios that Toppc has much better?
08-17-2009, 04:51 AM
LittleKnown

Quote:

Originally Posted by Dopamin3

I sold my GD70 and am back on the DKA790GX Platinum.

How does 1.8 unlock? I saw it unlocked but didn't run any stability tests. Is this bios that Toppc has much better?

I have no idea Dopamin3, I have just bought a DKA790GX Platinum and am waiting for a stable bios before I make my purchasing decision of either buying the Phenom II X3 720 BE or the II X2 550 BE.
Will decide on the proccy when I will see the successful unlocking of the 550 BE. till now I have unconfirmed reports that the DKA790GX Platinum 1.8 bios does unlock the cores.
Lets hope Toppc gives us some good news.
08-17-2009, 09:55 AM
Dopamin3

Quote:

Originally Posted by LittleKnown

I have no idea Dopamin3, I have just bought a DKA790GX Platinum and am waiting for a stable bios before I make my purchasing decision of either buying the Phenom II X3 720 BE or the II X2 550 BE.
Will decide on the proccy when I will see the successful unlocking of the 550 BE. till now I have unconfirmed reports that the DKA790GX Platinum 1.8 bios does unlock the cores.
Lets hope Toppc gives us some good news.

1.8 no good for unlocking. Did a quick test on 1.9b2, no coldboot issue with changing NB speed (problem similar on early beta of GD70). I will be testing for stability today, but it seems like it should be good :D

http://img22.imageshack.us/img22/1833/capturesvr.png
08-18-2009, 06:10 AM
Bredband

Quote:

Originally Posted by Dopamin3

1.8 no good for unlocking. Did a quick test on 1.9b2, no coldboot issue with changing NB speed (problem similar on early beta of GD70). I will be testing for stability today, but it seems like it should be good :D

http://img22.imageshack.us/img22/1833/capturesvr.png

What stepping you have on the 550BE?
My stepping is CACYC AC 0920GPMW. In Windows XP it work as X4, but in Windows 7 64-bit the computer reboot when it´s come to Windows logo. :-(
08-19-2009, 07:30 PM
Cisco Kid

Quote:

Originally Posted by Dopamin3

I sold my GD70 and am back on the DKA790GX Platinum.

How does 1.8 unlock? I saw it unlocked but didn't run any stability tests. Is this bios that Toppc has much better?

Between the 2 boards how do you find the 790GX compares? I have found it to be a good overclocker, I have my 920 at 3.6 but I have a X2 550 on way and already some great Mushkin DDR3 1600 so I have been giving thought to getting that board and selling off the 920 and 790GX Platinum but possibly opting for a 955 over the X2 550, gotta make mind up this eve as the cpu ships tommorrow from a contact...........
08-20-2009, 08:49 AM
Toppc

Quote:

Originally Posted by RRunner

TOPPC,

I am waiting BIOS for 790gx-g65 !!

Coldboot also!:(

790GX-G65 V144

http://www.coolaler.com.tw/toppc/BIOS/A7576144.rar

770-C35/C45 V142 (NEW 142.... )

http://www.coolaler.com.tw/toppc/BIOS/A7599142.rar

FLASH UTILITY

http://www.coolaler.com.tw/toppc/BIOS/AFUD4281.RAR
08-20-2009, 08:51 AM
Toppc

Quote:

Originally Posted by Cisco Kid

and the DKA790GX Platinum

DKA790GX PLATINUM 1.92 IN FAST PAGE
08-20-2009, 12:16 PM
WSP

Quote:

Originally Posted by Toppc

770-C35/C45 V142 (NEW 142.... )

http://www.coolaler.com.tw/toppc/BIOS/A7599142.rar

I will try it out soon....

thanks man...you've been a great help for us all!!! :up: :up: :up:
08-20-2009, 02:18 PM
oc550be

Quote:

Originally Posted by Toppc

FLASH UTILITY

http://www.coolaler.com.tw/toppc/BIOS/AFUD4281.RAR

Why old AFUD4281.EXE and not the new AFUD4310.EXE
08-20-2009, 11:43 PM
Toppc

Quote:

Originally Posted by oc550be

Why old AFUD4281.EXE and not the new AFUD4310.EXE

4310 IS FIX I5 MEFU...
AMD DON'T NEED ~
08-21-2009, 12:49 AM
LittleKnown

But a user here has unlocked the X2 550BE and here is the link, http://www.overclock.net/amd-cpus/53...ml#post6979358
It is the 1.8 bios, so I am wondering what went wrong with you.
Please tell me about the cold boot? what is it I am not getting it at all.

Quote:

Originally Posted by Dopamin3

1.8 no good for unlocking. Did a quick test on 1.9b2, no coldboot issue with changing NB speed (problem similar on early beta of GD70). I will be testing for stability today, but it seems like it should be good :D

http://img22.imageshack.us/img22/1833/capturesvr.png
08-22-2009, 09:08 AM
beta

new gd70 bios 1.55b @msi-forum.de
08-22-2009, 09:47 PM
mav2000

Any one used this one???

Show 100 post(s) from this thread on one page