Micron D9 GMH\GKX\JKH etc club

Printable View

Show 100 post(s) from this thread on one page

05-07-2009, 10:29 PM
Slyr7.62

Quote:

Originally Posted by zsamz_

they need 2.3v for 1200+ cas5
2.3 cas3 850mhz
2.45 1200 cas4
max speed is 1320 2.45v
they dont even boot below 2.1 lol

Thnx for the info. I guess for you that somewhat high voltage is ok as long as the ram still works, right. :yepp:
Lol, I cherish this Kingston GKX I have so I don't exactly ever want to burn it up. :shrug: :rofl:

Quote:

Originally Posted by Mafio

thx

1200 cas5 with 1.85 for everest test, with 1.92 it was stable for memtest

oooo, good to know. I just run 1.9V 24/7 but haven't taken my GKX past 1100mhz yet. :rolleyes:.
I suppose I should actually (try to) do a lower Vdimm like 1.84-1.88V (@ least for 5-5-5-15 1066).

Quote:

Originally Posted by Blue Storm

very nice Cell Shocks:up:Micron D9GKX are god's chips:yepp:

Oh, yes they sure are. That's to both sentences there. :D

Quote:

Originally Posted by Don_Dan

Thanks! :)

Will try to break 11k tonight with some settings I want to try!
I'm getting my first Cellshock kit ( 1066 CL5 ) soon, eagerly awaiting what they can do.

Have fun and Good luck. :up:
05-10-2009, 10:51 PM
Ender17

hey guys, sorry if this isn't allowed, but I have some Crucial 2 x 1GB PC2-8000 Ballistix Tracer BL12864AL1005.16FD3 Micron D9GMH for sale $50
http://www.xtremesystems.org/forums/...d.php?t=222621
05-11-2009, 08:29 AM
Don_Dan

Quote:

Originally Posted by Slyr7.62

Have fun and Good luck. :up:

Thanks, I'm sure I will have fun when I finally got the time to do it, my new job is eating up my free time...
BUT I got my Cellshock kit :)

Quote:

Originally Posted by Ender17

hey guys, sorry if this isn't allowed, but I have some Crucial 2 x 1GB PC2-8000 Ballistix Tracer BL12864AL1005.16FD3 Micron D9GMH for sale $50
http://www.xtremesystems.org/forums/...d.php?t=222621

Selling and trading isn't allowed in normal threads as far as I know, please keep it to PM and dedicated threads.
05-12-2009, 10:21 AM
Drix

Here are my results with Team Xtreem PC2-9600

I managed to get it Pi32M stable at 1333MHz C5/PL8
http://images3.hiboox.com/images/200...d267f56be5.bmp

:D
05-12-2009, 11:00 AM
elmysterio

Quote:

Originally Posted by zsamz_

i done that
compared gigabut x38 and p35 with all my saved runs
the dfi utx38 beat em both clock for clock and doesnt kill harware lol
and the dfi ut p35 beat the dfi ut-x38
i boxin my ut-p35 this week cause i gonna crossfire 2 4870s
yes the gigabut has ram clockin wr but i wanna see everest bandwidth lol

simone you 1000% wrong
utp35=utp45
do u know dfi got fsb wr

UTP 35 = DFI LP LT P35-T2R HEATSINK the performance ?
05-12-2009, 11:40 AM
zsamz_

Quote:

Originally Posted by elmysterio

UTP 35 = DFI LP LT P35-T2R HEATSINK the performance ?

i think so but not too sure
first thing i did was take the heatpipe crap off:rofl:
05-16-2009, 05:54 AM
Don_Dan

As I said, I got my Cellshock kit and tried what I could get on PL8.

The results I made are a bit frustrating, to say the least, not very happy with my kit. I was also testing the latest BIOS but I tried everything to get them higher. The system would bluescreen at 520MHz FSB and 624MHz RAM already...

http://img33.imageshack.us/img33/450...8cellshock.jpg

Any suggestions or something I overlooked that could hold me back?

It cost my >3 hours to do this already, so I pulled them out again, will try to do a good result on PL8 with another kit.

For now I will test something new, that a lot of you guys will like. Watch out for a new thread! :)
05-16-2009, 06:03 AM
tool_462

Quote:

Originally Posted by Don_Dan

For now I will test something new, that a lot of you guys will like. Watch out for a new thread! :)

Hope its OCZ Low Voltage :up:
05-16-2009, 08:23 AM
Don_Dan

Quote:

Originally Posted by tool_462

Hope its OCZ Low Voltage :up:

:wasntme:

http://img268.imageshack.us/img268/6623/4teaser1.jpg
05-21-2009, 05:00 PM
radaja

well it's been awhile since i posted here.so i got a great new cpu and another kit of cellshock pc8000's
that are turning out to be pretty decent.ddr1200 w/2.08v
http://i43.tinypic.com/kf1f2d.jpg

and heres some Pi run and everest scores

8x545@4360 ddr1308 pl8 32m Pi
http://i42.tinypic.com/b5nprp.jpg

8x545@4360 ddr1308 pl8 1m Pi
http://i42.tinypic.com/158baxz.jpg

everest
http://i43.tinypic.com/e9ulj8.jpg
05-24-2009, 01:02 AM
kagula323

nice results radaja . those d9 gkx chips are pure gold just like u'r new cpu :D
I have the oportunity to buy Mushkin Redline 2Gb (2x1Gb) DDR2-1000 (996525) (4-5-4-11) with D9GMH.
I wanna know if they are modules capable of 1200-1300MHZ with good voltages for dailly use? I have a pair of thermalright hr-07 memory heatspreaders that I could use on them in case they get hot :)
05-24-2009, 01:42 AM
WaterFlex

Who else has Red CellShock like me?
05-24-2009, 07:39 AM
radaja

kagula323,i bought the same kit but one module was bad.but i put the good one in with my cellshock pc8000's for 3GB and they all did 1200 easy
so i would guess you shouldnt have a problem doing 1200 24/7

waterflex,your the only person i know of that has this kit.are you sure they didnt just make one kit:D
05-24-2009, 08:22 AM
kagula323

I think he painted them :P

Edit: 10x radaja ... hope I'll buy them :)
05-24-2009, 08:34 AM
WaterFlex

radaja, dunno... but i love my red sexy shocks, i want more 2GB. :(
05-24-2009, 08:40 AM
radaja

i remember when i first got my cellshock pc8000's and i saw yours and you posted some results
then i looked and looked but nothing,and then someone said they could be found easy in germany so i looked and no luck.
i wanted them so bad and your right the heatspreaders are a big factor in my wanting them.they are awesome looking:D
05-24-2009, 10:26 AM
Don_Dan

WaterFlex, you are the only one I know who has those sticks, even in Germany they are rare, and I'm watching ebay very carefully...
05-24-2009, 10:42 AM
WaterFlex

I`m looking for the red Shocks of 25/07 manufacturing date. All sticks manufuctered later are bad.
Mine are 25/07(week/year)
05-25-2009, 04:21 AM
radaja

heres my latest.ddr1200 5-5-4-12-30 pl8 w/2.14 bios 2.10 load
http://i40.tinypic.com/21jpz02.jpg

everest score
http://i42.tinypic.com/28bu0eq.jpg
06-02-2009, 08:16 AM
Ket

Hopefully I can throw a new CPU in soon and mess around properly, my E7200 has not been kind to me.
06-03-2009, 03:46 PM
radaja

came across this pic i took awhile back
d9 micron :banana::banana::banana::banana:.
http://i39.tinypic.com/2cz4htk.jpg
06-04-2009, 09:36 PM
User111

Quote:

Originally Posted by Drix

Here are my results with Team Xtreem PC2-9600

I managed to get it Pi32M stable at 1333MHz C5/PL8
http://images3.hiboox.com/images/200...d267f56be5.bmp

:D

vdimm?
06-06-2009, 05:13 PM
radaja

got this today with my cellshock pc 8000cl4's
8x550@4400 w/1.29v ddr1320 pl8 w/2.28v
http://i44.tinypic.com/xbbmzb.jpg

http://i40.tinypic.com/4qmyrd.jpg
http://i40.tinypic.com/fo14pt.jpg

going to try for 8x563@4504 ddr1351.but i doubt i can do it.
06-07-2009, 06:26 AM
Drix

Quote:

Originally Posted by User111

vdimm?

'Only' 2.45v so it's their rated voltage (2.35-2.45v) with a good old 80mm HZ's fan on it. :)
And it doesn't work better with more juice if i remember well
06-07-2009, 03:44 PM
radaja

well i couldnt seem to get 560x8 stable(orthos blend) so i just ran 1mPi and
took and everest SS.this is at pl9.im going to see if i can get 560fsb ddr1340 pl8
and run 32m Pi.because at 556x8 ddr1333 pl8 i got 12019 copy score.
http://i42.tinypic.com/359g3l4.jpg
http://i39.tinypic.com/2gy2gjt.jpg

556x8 ddr1333 pl8
http://i44.tinypic.com/147920.jpg

Show 100 post(s) from this thread on one page