Now, is that 8k for the card or for the single gpu? If its the latter thats great! If its the former, my GTX260 gets a little over 7k, so thats sad. :(Quote:
Originally Posted by WFO
Printable View
Now, is that 8k for the card or for the single gpu? If its the latter thats great! If its the former, my GTX260 gets a little over 7k, so thats sad. :(Quote:
Originally Posted by WFO
Two gpu's ;)
300W is gaming draw, folding draw is quite a bit lower. Still, I don't feel inclined to fold on the GPU if I don't get credited accordingly. A 4870X2 should do something in the 11-12k range, and here I am, slouching along at below 3k (according to FAHmon) on GPU :(Quote:
Originally Posted by Marvin_The_Martian
The 8800 Ultra made close to 6k. A little 3d comparison? Vantage GPU score is 6800 for the Ultra, 15k for the X2 (both at stock clocks). Go figure :down:
Hmm, I got my 4870x2 to folding with 2 clients on xp, could not get it to work on both in vista and was only getting 2500 ppd each client 5000 ppd total one card. That is why they are in the drawer and I have 8800s making over 5000 ppd each...
Seriously, this is the only place where people have $500 graphics cards just laying around in drawers....insanity.Quote:
Originally Posted by road-runner
@catawalks, receive your present yet?? :)
Hell I got 2 of them and 2 3870x2 along with 2 2900s in the drawer, all bought new when they came out. I figured I would use them for folding also, that did not last long nvidia came out with a folding client... :shakes:Quote:
Originally Posted by catawalks
Maybe you should sell them to recoup some of the money :shrug:Quote:
Originally Posted by road-runner
Yeah RR they might not fold well relatively speaking, but they game well. Get some of your money back. never hurts to have money in the pocket instead of unused hw in a drawer ( xcept.. you'll hit yourself if the Ati client in a month get's a special surprise 100% speed boost or something :rofl: ) :yepp:
I did indeed. Just got it yesterday. Haven't hooked it up yet but I think that'll have to wait until early next week. I'm barely gonna be home until monday or tuesday night. :(Quote:
Originally Posted by sniperbob
:eek2: Amazing, I think I'm either insanely in love with your drawers or insanely jealous of you. I wish I had parts like that laying around. Instead I have ISA sound/network cards and old P/2/3 machines just chilling.Quote:
Originally Posted by road-runner
If you were to get rid of some of those cards, what kinda prices would you be looking to get for them? Although I did just buy 2 3870's from WFO, who knows, maybe I should get a couple 3870x2's? Or maybe 4870x2's? lol....I gotta stop spending money.....nah.
I have the 1950xt left laying in there from the GPU1 folding episode :shakes: I will hang onto them, I use them in forum wars and have been running 2 rigs each time, and like you say they may get the client working better someday...Quote:
Originally Posted by Marvin_The_Martian
What are forum wars if you don't mind me asking?
Quote:
Originally Posted by catawalks
Link I played for OCC a couple times and the TRP this last time. I dont know why XS does not participate...Quote:
Forum Wars is an overclocking competition between forums who choose to take part. Each forum has it's own players competing against the other forums players in a series of Benchmarks or PC tests. These tests determine a point value for your systems performance level. To try and make this a balanced contest, competing systems are divided into classes / teams.
x1xxx will never fold again afaik?Quote:
Originally Posted by road-runner
No I doubt it will, I just never have really got rid of anything. I have all kinds of old hardware. I read about people getting taken all the time buying and selling, I dont have that problem...:up:Quote:
Originally Posted by Marvin_The_Martian
Lol it's a rather subjective matter, most of those people I think actually need to sell things before then buy the new one's :up:Quote:
Originally Posted by road-runner
For them ( us.. if I still had things of worth laying around unused ) it's not the time going into it which matters, but the money we get back by doing so which is the most important. It's simple math, the time it costs to sell them and get their worth back, even when spend at labour would usually net us less then the money we earn with the reselling.
Consider yourself a lucky man :up: idk how your lovelife looks like though so luck is also subjective.. ;)
No, they are all burned up and dead anyways, like my X1900XTX :shakes:Quote:
Originally Posted by Marvin_The_Martian
I know enough people still gaming on those cards though, good cards still :)
Though I keep telling them a 4850 would improve their experience so much for so litle money in comparison to what they paid for those 1900xtx's or xt's.
And nope they're not a member here, or atleast not of the kind that likes to burn hardware hehe. Can't afford that myself now :( *eyes 9600gt... keep living you hear.. no more memory corruption when I come downstairs ok :mad:
It's actually a good thing they don't fold anymore, don't think their performance/watt would be all that great :rofl:
Thinking of running 2 instances of smp but haven't used it since GPU on nVidia happened. Can I do this with 3*gpu running on one core? can I just copy the first instance into another folder and re-config? Can someone remind me how to set the cores this would run on?
Uhm... linkage? That'd be a very interesting read to see these PPD on an ATI card. Additionally I only heard about trouble with setting up two instances on an X2, never saw someone actually do this. :eek:Quote:
Originally Posted by WFO
For assigning cores and setting affinities you should go have a read over in this thread. I think it would be possible to set this up, even though I can only speak for two GPU and SMP's. I would setup one, then two, then three and let each configuration run a day or a bit more to see what gets you the most ppd. Keep us updated. :up:Quote:
Originally Posted by OldChap
Edit: Oh, and I forgot, copying over for SMP installs doesn't work, you need to install each of them, in your user directory. And you need to run the MPI install steps on each of them, just check what coo-coo-clocker linked one post down. The only thing you can copy over are the cfg's, just set them up accordingly.
For XP-based systems, the GPU client will need a lot of CPU (and my experience is that with these lastest GPU cores that Stanford has been sending, this is getting worse)... so unless you're running vista you won't really be able to run dual-SMP and multiple GPU clients effectively.Quote:
Originally Posted by OldChap
Assuming you are running vista, and you have quad-core (or better! new i7's are available at retail starting tomorrow :D), you can do dual-SMP and still have enough horsepower for GPU clients.
Best way to do this is
1) consult Scoop's most excellent SMP setup guide,
2) consult PG's multi-GPU setup guide,
3) run WinAFC to keep the PIDs from stepping all over each other,
4) and of course come here and ask for help (and/or give some to others in need :))
Left the GPU's running, and put SMP on q6600 stock clocks. GPU's are on core 3, other processes on 0,1,2. output with SMP roaming free 1360ppd.
Moved SMP to cores 0,1 and other processes to core 2 output dropped to 1199
added second instance of SMP useing method in my first post on this and set it to cores 2,3. output about 733ppd
Not so impressive but better than nothing I have run this overclocked to get 1920 ppd on 1 SMP but the ram I use now is different so I don't have the time to get a stable overclock. I already have set affinity 2 on my machine not the best for this but it is working.
Can anyone tell me what output they get for running a single instance of gromacs (the non smp version of 6.23)
I haven't really followed the threads over in the ATI section since I pulled the 3870s. Now you have to go to about page 3 to find people talking about it. Some still claim they have their cards working yet I have yet to see mhouston say the cards are full supported for 2 instances. :shrug: My bet is that RR couldn't get his cards working satisfactorily, those that claim they do are blowing smoke. :shrug:Quote:
Originally Posted by p2501
http://onemansblog.com/wp-content/up...owingSmoke.jpgQuote:
Originally Posted by WFO
Do you mean this comment?
mhouston wrote:
The 3870 X2 should work if you disable crossfire in the control panel. It's the 4870X2 we are having issues with in Vista. In XP it works just fine, but the CPU utilization doesn't drop as drastically as it does in Vista.
Hadn't seen that one OC. Thanks for posting it. :)Quote:
Originally Posted by OldChap
On this page:- http://foldingforum.org/viewtopic.ph...&sd=a&start=30
Well, even if they're blowing smoke, 7-8k PPD for 300w per card is no match for say a GTX260 216 at 180w. :(
Agreed. Even with the larger WUs Nvidia still rules for folding. If I was a gamer and I'm not, I'd want dual or triple 4870 X2s and take whatever points I could get for folding. ;)Quote:
Originally Posted by p2501
if only the fah bench tech could learn to throw darts a little better,Quote:
Originally Posted by WFO
then we'd be in business. :yepp:
What do I need to get to start folding? never done it before :)
nm, think I found it...
ok, up and running
Nice to have you aboard. :wtf:
As soon as they update go to http://folding.extremeoverclocking.com/?nav=IMAGES and get your sig in your forum signature. :up::up::up:
There something else you can run that runs off your gpu and not cpu?
meaning is there something else i can run along with folding@home that will utilize my video card
** just noticed when I checked my status it shows this for my team
Default (includes all those WU returned without valid team number) (0)
I put in the 36362 for team though in the config... I need to do something else?
Quote:
Originally Posted by doox00
Not at the moment, well there is gpugrid on boinc tbh, but it's no way close to being as usefull as f@h ( new project, has to proof itself imo ).
That's the wrong team, keep it running just create a new shortcut with the -configonly flag, then change team number, close client and restart ( just to be sure.. it should pick it up without restart but I'm not sure when, might be after turning in the current wu :shrug: )
With those Nvidia GTX260 video cards you could disable the SLI and then run the FAH GPU2 folding client one on each card they should generate more than 10K ppd per day. I am sure one of the windows folders could help get you going with the multiple GPU 2 clients being a Linux guy my windows folding setup knowledge is very limited and quite out of date have not folding on Windows in over a year.Quote:
Originally Posted by doox00
yeah I am dumb.. I musta folded once a couple years ago as it showed those results also.. it shows me folding for XS under that :)Quote:
Originally Posted by Shadowtester
http://folding.extremeoverclocking.c...00CC&c5=FFFFFF
Code:http://folding.extremeoverclocking.com/sigs/sigimage.php?u=408308&c1=FFFFFF&c2=000000&c3=000000&c4=0000CC&c5=FFFFFF
I'm asking advice here about moving to folding other than within windows. I've only ever used windows, unless you count stuff like dos which was so long ago....
Now the race is over I want to try to learn the other ways.
Would anyone like to recommend an order of learning eg try notfred first then xxx then xxx then ......
The aim here is to end up with the most productive setup on a q6600 with 4gig and 3 gpu but along the way learn a little about linux and vm's etc.
linux is good for smp...although I could never get the GPU's running..
I just completed a fresh install of Kubuntu 8.04 and then did the wine GPU2 client setup the big thing is getting the Nvidia drivers installed and setup correctly after that the rest is easy. There is a pretty good setup guide on this forum for doing this in Ubuntu.
http://www.xtremesystems.org/forums/...d.php?t=199660
And the custom wine cuda wrapper can be downloaded from this website
http://www.altechnative.net/download.php?list.1
I need to try this also, how are the ppd on the gpu2?Quote:
Originally Posted by Shadowtester
With the Nvidia Linux 177 drivers on my 8800gt 512mb pny card running stock clocks on the 480 pt projects I was get around 4.6k ppd times around 1min 25 to 30 sec. Most Linux wine gpu2 folders have been reporting ppd as good if not better then Windows.Quote:
Originally Posted by road-runner
So do you think there is no need to do this in steps? Just go for it?
I have very similar rig to you but am thinking of putting this on an older asrock MB. I am waiting on rma of max formula for my main rig so am a little limited in having no spare just now
I wanted to try this in a vm to practise but I'm afraid it won't work that way. Xp under vm also doesn't expose the real gpu so am I right to assume I really need to install it as a native os?
Don't have a spare hdd to, and the one with the most space on it is a external usb hdd, don't think that's a good idea...
Thanks for the link :)Quote:
Originally Posted by MaK2000
it normal my cpu is only about 10-15 percent utilized by folding? figured it would use more.
**yeah something is not right.. its been running since I downloaded it yesterday and it shows 183 for today... I see others have in the thousands for today.
Did you follow the guides? 183points for 3 wu's is indicating your client is eue'ing. Post your fahlog.txt in [ code ] [ / code ] tags :up:
Here is my log file. Not sure what eue'ing is :)
Code:--- Opening Log file [November 25 01:55:44 UTC]
# Windows CPU Systray Edition #################################################
###############################################################################
Folding@Home Client Version 6.20
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\Users\admin\AppData\Roaming\Folding@home-x86
[01:55:44] - Ask before connecting: No
[01:55:44] - User name: doox00 (Team 36362)
[01:55:44] - User ID: 6F57BB2A7BDCF1E6
[01:55:44] - Machine ID: 1
[01:55:44]
[01:55:44] Loaded queue successfully.
[01:55:44] Initialization complete
[01:55:44]
[01:55:44] + Processing work unit
[01:55:44] Core required: FahCore_81.exe
[01:55:44] Core found.
[01:55:44] Working on queue slot 04 [November 25 01:55:44 UTC]
[01:55:44] + Working ...
[01:55:44]
[01:55:44] *------------------------------*
[01:55:44] Folding@Home Gromacs Simulated Tempering Core
[01:55:44] Version 1.10 (Oct 4, 2007)
[01:55:44]
[01:55:44] Preparing to commence simulation
[01:55:44] - Looking at optimizations...
[01:55:44] - Files status OK
[01:55:45] - Expanded 563919 -> 2772113 (decompressed 491.5 percent)
[01:55:45]
[01:55:45] Project: 4102 (Run 39, Clone 17, Gen 11)
[01:55:45]
[01:55:45] Assembly optimizations on if available.
[01:55:45] Entering M.D.
[01:56:05] (Starting from checkpoint)
[01:56:05] Protein: p4102_ww_folded_Amber03_Native
[01:56:05]
[01:56:05] Writing local files
[01:56:05] Completed 945000 out of 1500000 steps (63%)
[01:56:05] Extra SSE boost OK.
[02:07:41] Writing local files
[02:07:41] Completed 960000 out of 1500000 steps (64%)
[02:19:16] Writing local files
[02:19:16] Completed 975000 out of 1500000 steps (65%)
[02:30:51] Writing local files
[02:30:51] Completed 990000 out of 1500000 steps (66%)
that can't be the complete logfile .. is it? post fahlog-prev as well if you got it. If you don't have the prev log, and this is all you got, you made a mistake with the install, as I said, did you read the guides? Sli disabled, clients in the right place? You got two cards, you should have two clients running and thus post two logs ( each client in a seperate folder ).
If you didn't do all that, delete your current client and disable sli, then run www.mtm78.nl/maxfah/publish.htm, install the gpu clients and just enter your name ( team number should already be 36362 ), don't mess with the other options and after install go to c:\maxfah\clients there will be a folder for each instance and you can run them from there ( if you want to create shortcuts be sure to change the start folder for each shortcut ).
nope did not read any guides.. not sure I saw em.. its probably stickied somewhere :) I do not have sli right now.. other card is on its way and it won't be installed until I get my wc all done in the next week or two. suppose I should find the guide and read it. I thought this used your cpu too lol.. the folding I have right now just uses my cpu, just downloaded the folding client from http://folding.stanford.edu/. What does http://www.mtm78.nl/maxfah/publish.htm do exactly?Quote:
Originally Posted by Marvin_The_Martian
install clients ;) but you still need to read the guides :)
You are correct you will not be able to fold with the gpu using VMware you will need to do a native Linux install and then use wine. No you could do a dual boot install so you could boot into Linux when you wanted to fold and then boot into windows when you needed to use your computer for other things that you can not do in Linux. and you could use a usb hdd but it would be a little slow.Quote:
Originally Posted by Marvin_The_Martian
That core and wu is for a standard CPU client you forgot the -smp flag that is the problem. You need to add the -smp flag to get a smp wu and download the smp core.Quote:
Originally Posted by doox00
@doox00 the High Performance Clients are here
http://folding.stanford.edu/English/DownloadWinOther
For your gpu the sys tray client will work. its easy to set up and for your cpu use the smp with MPICH
Guide for smp in Vista
http://www.stanford.edu/group/pandeg...nSMPGuideMPICH
okay, now I have my gpu and all 4 cores of my cpu working
still only using about 12 percent of each core though.. this normal?
:up: and welcome to the team...Quote:
Originally Posted by doox00
not normal at all. Is this still happening?Quote:
Originally Posted by doox00
yeah, it has an instance open for each core.. each core is using 12-14 percent at all times. I read this guideQuote:
Originally Posted by catawalks
http://www.stanford.edu/group/pandeg...nSMPGuideMPICH
Pretty sure did all that right...
Show us a ss for taskmanager procceses tab :)
Did you add "-smp" to the desktop shortcut?
Check the core version in your log is it core_78 or core_a1?
yep, added -smp... here is my logQuote:
Originally Posted by ThunderDuck
Code:
--- Opening Log file [November 25 03:36:26 UTC]
# Windows CPU Console Edition #################################################
###############################################################################
Folding@Home Client Version 6.22 SMP Beta2
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\folding
Executable: fah6
Arguments: -configonly
[03:36:26] Configuring Folding@Home...
[03:37:43] - Ask before connecting: No
[03:37:43] - User name: doox00 (Team 36362)
[03:37:43] - User ID: 6F57BB2A7BDCF1E6
[03:37:43] - Machine ID: 1
[03:37:43]
[03:37:43] -configonly flag given, so exiting.
--- Opening Log file [November 25 03:40:15 UTC]
# Windows SMP Console Edition #################################################
###############################################################################
Folding@Home Client Version 6.22 SMP Beta2
http://folding.stanford.edu
###############################################################################
###############################################################################
Launch directory: C:\folding
Executable: fah6
Arguments: -smp
[03:40:15] - Ask before connecting: No
[03:40:15] - User name: doox00 (Team 36362)
[03:40:15] - User ID: 6F57BB2A7BDCF1E6
[03:40:15] - Machine ID: 1
[03:40:15]
[03:40:15] Work directory not found. Creating...
[03:40:15] Could not open work queue, generating new queue...
[03:40:15] - Preparing to get new work unit...
[03:40:15] + Attempting to get work packet
[03:40:15] - Connecting to assignment server
[03:40:16] - Successful: assigned to (171.64.65.64).
[03:40:16] + News From Folding@Home: Welcome to Folding@Home
[03:40:16] Loaded queue successfully.
[03:40:26] + Closed connections
[03:40:26]
[03:40:26] + Processing work unit
[03:40:26] Work type a1 not eligible for variable processors
[03:40:26] Core required: FahCore_a1.exe
[03:40:26] Core not found.
[03:40:26] - Core is not present or corrupted.
[03:40:26] - Attempting to download new core...
[03:40:26] + Downloading new core: FahCore_a1.exe
[03:40:28] + 10240 bytes downloaded
[03:40:28] + 20480 bytes downloaded
[03:40:28] + 30720 bytes downloaded
[03:40:28] + 40960 bytes downloaded
[03:40:28] + 51200 bytes downloaded
[03:40:28] + 61440 bytes downloaded
[03:40:28] + 71680 bytes downloaded
[03:40:28] + 81920 bytes downloaded
[03:40:28] + 92160 bytes downloaded
[03:40:28] + 102400 bytes downloaded
[03:40:28] + 112640 bytes downloaded
[03:40:28] + 122880 bytes downloaded
[03:40:28] + 133120 bytes downloaded
[03:40:28] + 143360 bytes downloaded
[03:40:28] + 153600 bytes downloaded
[03:40:28] + 163840 bytes downloaded
[03:40:28] + 174080 bytes downloaded
[03:40:28] + 184320 bytes downloaded
[03:40:28] + 194560 bytes downloaded
[03:40:28] + 204800 bytes downloaded
[03:40:28] + 215040 bytes downloaded
[03:40:28] + 225280 bytes downloaded
[03:40:28] + 235520 bytes downloaded
[03:40:28] + 245760 bytes downloaded
[03:40:28] + 256000 bytes downloaded
[03:40:28] + 266240 bytes downloaded
[03:40:28] + 276480 bytes downloaded
[03:40:28] + 286720 bytes downloaded
[03:40:28] + 296960 bytes downloaded
[03:40:28] + 307200 bytes downloaded
[03:40:28] + 317440 bytes downloaded
[03:40:28] + 327680 bytes downloaded
[03:40:28] + 337920 bytes downloaded
[03:40:28] + 348160 bytes downloaded
[03:40:28] + 358400 bytes downloaded
[03:40:28] + 368640 bytes downloaded
[03:40:28] + 378880 bytes downloaded
[03:40:28] + 389120 bytes downloaded
[03:40:28] + 399360 bytes downloaded
[03:40:28] + 409600 bytes downloaded
[03:40:28] + 419840 bytes downloaded
[03:40:28] + 430080 bytes downloaded
[03:40:28] + 440320 bytes downloaded
[03:40:28] + 450560 bytes downloaded
[03:40:28] + 460800 bytes downloaded
[03:40:28] + 471040 bytes downloaded
[03:40:28] + 481280 bytes downloaded
[03:40:28] + 491520 bytes downloaded
[03:40:28] + 501760 bytes downloaded
[03:40:28] + 512000 bytes downloaded
[03:40:28] + 522240 bytes downloaded
[03:40:28] + 532480 bytes downloaded
[03:40:28] + 542720 bytes downloaded
[03:40:28] + 552960 bytes downloaded
[03:40:28] + 563200 bytes downloaded
[03:40:28] + 573440 bytes downloaded
[03:40:28] + 583680 bytes downloaded
[03:40:28] + 593920 bytes downloaded
[03:40:28] + 604160 bytes downloaded
[03:40:28] + 614400 bytes downloaded
[03:40:28] + 624640 bytes downloaded
[03:40:29] + 634880 bytes downloaded
[03:40:29] + 645120 bytes downloaded
[03:40:29] + 655360 bytes downloaded
[03:40:29] + 665600 bytes downloaded
[03:40:29] + 675840 bytes downloaded
[03:40:29] + 686080 bytes downloaded
[03:40:29] + 696320 bytes downloaded
[03:40:29] + 706560 bytes downloaded
[03:40:29] + 716800 bytes downloaded
[03:40:29] + 727040 bytes downloaded
[03:40:29] + 737280 bytes downloaded
[03:40:29] + 747520 bytes downloaded
[03:40:29] + 757760 bytes downloaded
[03:40:29] + 768000 bytes downloaded
[03:40:29] + 778240 bytes downloaded
[03:40:29] + 788480 bytes downloaded
[03:40:29] + 789667 bytes downloaded
[03:40:29] Verifying core Core_a1.fah...
[03:40:29] Signature is VALID
[03:40:29]
[03:40:29] Trying to unzip core FahCore_a1.exe
[03:40:29] Decompressed FahCore_a1.exe (2035712 bytes) successfully
[03:40:34] + Core successfully engaged
[03:40:39]
[03:40:39] + Processing work unit
[03:40:39] Work type a1 not eligible for variable processors
[03:40:39] Core required: FahCore_a1.exe
[03:40:39] Core found.
[03:40:39] Using generic mpiexec calls
[03:40:39] Working on queue slot 01 [November 25 03:40:39 UTC]
[03:40:39] + Working ...
[03:40:39]
[03:40:39] *------------------------------*
[03:40:39] Folding@Home Gromacs SMP Core
[03:40:39] Version 1.74 (March 10, 2007)
[03:40:39]
[03:40:39] Preparing to commence simulation
[03:40:39] - Ensuring status. Please wait.
[03:40:42] - Starting from initial work packet
[03:40:42]
[03:40:42] Project: 2665 (Run 3, Clone 522, Gen 70)
[03:40:42]
[03:40:42] Assembly optimizations on if available.
[03:40:42] Entering M.D.
[03:41:00] al work packet
[03:41:00]
[03:41:00] Project: 2665 (Run 3, Clone 522, Gen 70)
[03:41:00]
[03:41:00] 65 (Run 3, Clone 522, Gen 70)
[03:41:00]
[03:41:01] Entering M.D.
[03:41:07] Rejecting checkpoint
[03:41:09] Protein: HGG in water
[03:41:09] Writing local files
[03:41:12] Extra SSE boost OK.
[03:41:12] Writing local files
[03:41:12] Completed 0 out of 250000 steps (0 percent)
[03:54:09] Writing local files
[03:54:09] Completed 2500 out of 250000 steps (1 percent)
[04:07:07] Writing local files
[04:07:07] Completed 5000 out of 250000 steps (2 percent)
[04:20:08] Writing local files
[04:20:08] Completed 7500 out of 250000 steps (3 percent)
[04:33:06] Writing local files
[04:33:06] Completed 10000 out of 250000 steps (4 percent)
[04:46:07] Writing local files
[04:46:07] Completed 12500 out of 250000 steps (5 percent)
[04:59:08] Writing local files
[04:59:08] Completed 15000 out of 250000 steps (6 percent)
[05:12:08] Writing local files
[05:12:09] Completed 17500 out of 250000 steps (7 percent)
[05:25:09] Writing local files
[05:25:09] Completed 20000 out of 250000 steps (8 percent)
[05:38:10] Writing local files
[05:38:10] Completed 22500 out of 250000 steps (9 percent)
[05:51:21] Writing local files
[05:51:21] Completed 25000 out of 250000 steps (10 percent)
[06:04:28] Writing local files
[06:04:28] Completed 27500 out of 250000 steps (11 percent)
[06:17:30] Writing local files
[06:17:30] Completed 30000 out of 250000 steps (12 percent)
[06:30:34] Writing local files
[06:30:34] Completed 32500 out of 250000 steps (13 percent)
[06:43:33] Writing local files
[06:43:33] Completed 35000 out of 250000 steps (14 percent)
[06:56:32] Writing local files
[06:56:32] Completed 37500 out of 250000 steps (15 percent)
[07:09:32] Writing local files
[07:09:32] Completed 40000 out of 250000 steps (16 percent)
[07:22:32] Writing local files
[07:22:32] Completed 42500 out of 250000 steps (17 percent)
[07:35:33] Writing local files
[07:35:33] Completed 45000 out of 250000 steps (18 percent)
[07:48:37] Writing local files
[07:48:37] Completed 47500 out of 250000 steps (19 percent)
[08:01:41] Writing local files
[08:01:41] Completed 50000 out of 250000 steps (20 percent)
[08:14:35] Writing local files
[08:14:35] Completed 52500 out of 250000 steps (21 percent)
[08:27:31] Writing local files
[08:27:31] Completed 55000 out of 250000 steps (22 percent)
[08:40:26] Writing local files
[08:40:26] Completed 57500 out of 250000 steps (23 percent)
[08:53:24] Writing local files
[08:53:24] Completed 60000 out of 250000 steps (24 percent)
[09:06:21] Writing local files
[09:06:21] Completed 62500 out of 250000 steps (25 percent)
[09:19:19] Writing local files
[09:19:19] Completed 65000 out of 250000 steps (26 percent)
[09:32:14] Writing local files
[09:32:14] Completed 67500 out of 250000 steps (27 percent)
[09:45:12] Writing local files
[09:45:13] Completed 70000 out of 250000 steps (28 percent)
[09:58:16] Writing local files
[09:58:16] Completed 72500 out of 250000 steps (29 percent)
[10:11:15] Writing local files
[10:11:15] Completed 75000 out of 250000 steps (30 percent)
[10:24:14] Writing local files
[10:24:14] Completed 77500 out of 250000 steps (31 percent)
[10:37:10] Writing local files
[10:37:10] Completed 80000 out of 250000 steps (32 percent)
[10:50:09] Writing local files
[10:50:09] Completed 82500 out of 250000 steps (33 percent)
[11:03:04] Writing local files
[11:03:04] Completed 85000 out of 250000 steps (34 percent)
[11:16:02] Writing local files
[11:16:02] Completed 87500 out of 250000 steps (35 percent)
[11:28:59] Writing local files
[11:28:59] Completed 90000 out of 250000 steps (36 percent)
[11:41:57] Writing local files
[11:41:57] Completed 92500 out of 250000 steps (37 percent)
[11:54:53] Writing local files
[11:54:53] Completed 95000 out of 250000 steps (38 percent)
[12:07:57] Writing local files
[12:07:57] Completed 97500 out of 250000 steps (39 percent)
[12:20:56] Writing local files
[12:20:56] Completed 100000 out of 250000 steps (40 percent)
[12:33:56] Writing local files
[12:33:56] Completed 102500 out of 250000 steps (41 percent)
[12:46:53] Writing local files
[12:46:53] Completed 105000 out of 250000 steps (42 percent)
[12:59:48] Writing local files
[12:59:49] Completed 107500 out of 250000 steps (43 percent)
[13:12:49] Writing local files
[13:12:49] Completed 110000 out of 250000 steps (44 percent)
[13:25:46] Writing local files
[13:25:46] Completed 112500 out of 250000 steps (45 percent)
[13:38:45] Writing local files
[13:38:45] Completed 115000 out of 250000 steps (46 percent)
[13:51:40] Writing local files
[13:51:40] Completed 117500 out of 250000 steps (47 percent)
[14:04:36] Writing local files
[14:04:36] Completed 120000 out of 250000 steps (48 percent)
[14:17:32] Writing local files
[14:17:33] Completed 122500 out of 250000 steps (49 percent)
[14:30:30] Writing local files
[14:30:30] Completed 125000 out of 250000 steps (50 percent)
[14:43:28] Writing local files
[14:43:28] Completed 127500 out of 250000 steps (51 percent)
[14:56:25] Writing local files
[14:56:25] Completed 130000 out of 250000 steps (52 percent)
[15:09:19] Writing local files
[15:09:20] Completed 132500 out of 250000 steps (53 percent)
[15:22:17] Writing local files
[15:22:17] Completed 135000 out of 250000 steps (54 percent)
[15:35:15] Writing local files
[15:35:15] Completed 137500 out of 250000 steps (55 percent)
[15:48:15] Writing local files
[15:48:15] Completed 140000 out of 250000 steps (56 percent)
[16:01:16] Writing local files
[16:01:16] Completed 142500 out of 250000 steps (57 percent)
[16:14:14] Writing local files
[16:14:14] Completed 145000 out of 250000 steps (58 percent)
[16:27:09] Writing local files
[16:27:09] Completed 147500 out of 250000 steps (59 percent)
[16:40:09] Writing local files
[16:40:09] Completed 150000 out of 250000 steps (60 percent)
[16:53:08] Writing local files
[16:53:09] Completed 152500 out of 250000 steps (61 percent)
[17:06:10] Writing local files
[17:06:10] Completed 155000 out of 250000 steps (62 percent)
[17:19:06] Writing local files
[17:19:06] Completed 157500 out of 250000 steps (63 percent)
Edit you know what nevermind.. have fun :wave:
http://westmichiganmoms.net/files/xs/taskmanager.jpgQuote:
Originally Posted by Marvin_The_Martian
jeez...Run another beside this one and show us those numbers...go on you know you want to :)
Wait wait.. you're running a nelly.. that's 4 real cores but 8 with ht enabeld. That's the problem there.
Think MM ran with HT off, and got about 6K ppd iirc.
Two options, reboot without ht on and check cpu usage, should definetly work I think. Or run multiple instances!
Idk how the ht cores are mapped, otherwise I would advice to use AFC but I'm not even sure that supports nelly already :(
Not even sure how affinity changer would work with a nelly.
Shortest solution I got is running with ht off. But idk if it's the most effective. I wonder how a nelly does under linux with the -smp 8 flag though, if it's an improvement over running normal a2 cores without ht. Man I whish I had your system :rofl:
@ oldchap MM had troubles runing dual instances so either fah doesn't like him or nelly doesn't like dual fah's. I'm going to check the thread on the folding forums about AFC maybe there is some nelly info there :up:
Hey guys, forgive me if this has been answered 100 times already but I just wanted to make sure there isnt anything else I need to do.
I pretty much just installed the F@H GPU client, made a user name and then put 36362 in the team number spot and then let her rip, been folding for about a week and a half non stop. Is there anything else I need to do? I am folding with the rig on the sight side of my Sig.
Welcome to the party!
you're in like flynn...
here's your sig image...
http://folding.extremeoverclocking.c...arowah&t=36362
Jason still is blocking me.. think he got scared by my email.. hey do you mind if I make about 700 xml queries to your export functions.. per update :sofa:
He says there is a script blocking ip's when they make to many queries, but my loop ran through 200 queries with atleast a second delay between them and the morning I came down I could still browse there and check stats, it was only in the afternoon after he read the mail I guess that I got blocked :rotf:
It's not like I can't use a proxy but I'd rather have him just unblock me :)
Kakao is to slow for my liking :horse:
Why I bring it up... because all I see is a red X where all those sig images are supposed to be :rofl:
Thanks MikeB12, how do I go about getting that sig image into my sig and keep it updating? I know I can just copy the image to my drive but wont that just be the static image with no updates?
Quote his post and put the entire [ url = xxxx ] [ img ] url [ /img ] [/url ] in your sig that will autoupdate as it linkes to a webservice :)
Many thanks, I guess I need to work on getting my sig smaller now hehe, I would like to move the Image to the center of the sig area but I couldnt get it to work, I will work on that this weekend.
Thank you for the help and the Welcome guys =)
[ center ] the thing you pasted already [ /center ]
or select the text and press the allign option in the wysiwyg editor. There are a few good guides for bbcode on the web if you want to learn, but as it's a subclass of html you might as well skip it and go right to the good stuff :)
Got something against big sigs? :rofl::ROTF::shocked:
Mak's huge image or Marvins wall of text ... what's the difference ? :hehe:
Hey I can link to 10 members with more sig space ( yes... I did have to look for em :sofa: )
I already removed a line because I was told it was getting to big, and the wfo quote I think will wear off in a few days seeing the graph :cord: ;)
I just wish the sig edit box was wider, I have so much coding for my sig it is so hard to figure out exactly where I am in that dinky little sig edit box :p:
Quote:
Originally Posted by MaK2000
It is actually three images. The top and then the folding sig and then the lower part of my bandwidth sig. I need to brush it up but I will wait till I get new hardware and then update the 3DM6 and 3DMV scores on it.Quote:
Originally Posted by Kondik
pfft, who needs pictures. Text is where it's at.
Quick Question....What is an A2 core? Linux only?
Yes - Fahcore_a1 is Windows SMP and Fahcore_a2 is Linux SMP.
Thanks Russ, Thought so but just wanted to make sure I wasn't missing points somehow. :)
He forgot one though, macOS :P
I'm running a q6600 @ 3.6 with g-skills @ 1066 on x38 and XP sp3. My previous runs with SMP were with 5.91 on lesser equipment at lower speeds.
I am trialing 180.60 for the GPU's now and WinAFC too.
What I need is ppd figures for single and dual instances of SMP. BOTH Vista and XP either with or without GPU running too. Can anyone help?
*Q6600@3330mhz 1.35v | Abit IP35pro | 2x2GB Gskil pc8000@925mhz | Asus 9800GT 700/1783/900 | Corsair HX520 | CM690 | TRUE 120Quote:
Originally Posted by OldChap
Vista 64 w/ the old AC http://distributed.org.ua/forum/inde...showtopic=1149
SETUP A: Q6600@3.33ghz on a single smp client...
SETUP B: Q6600@3.33ghz on dual smp clients with affinity changer...Quote:
Project : 2665
Core : SMP Gromacs
Frames : 100
Credit : 1920
-- X4-smp1-Vista64-Q6600-3330mhz-6.23 --
Min. Time / Frame : 13mn 15s - 2086.64 ppd
Avg. Time / Frame : 13mn 20s - 2073.60 ppd
Cur. Time / Frame : 13mn 26s - 2058.16 ppd
R3F. Time / Frame : 13mn 22s - 2068.43 ppd
Quote:
Project : 2665
Core : SMP Gromacs
Frames : 100
Credit : 1920
-- X4-smp1-Vista64-Q6600-3330mhz-6.23 --
Min. Time / Frame : 16mn 15s - 1701.42 ppd
Avg. Time / Frame : 16mn 32s - 1672.26 ppd
Cur. Time / Frame : 16mn 37s - 1663.87 ppd
R3F. Time / Frame : 16mn 37s - 1663.87 ppd
-- X4-smp2-Vista64-Q6600-3330mhz-6.23 --
Min. Time / Frame : 16mn 14s - 1703.16 ppd
Avg. Time / Frame : 17mn 00s - 1626.35 ppd
Cur. Time / Frame : 16mn 29s - 1677.33 ppd
R3F. Time / Frame : 16mn 29s - 1677.33 ppd
Thanks Mike, For us XP types preliminary results look good....Very good in fact. Keep an eye on the WinAFC thread if you are interested.
Anyone got these figures beat?
I've got a question about memory on a fold only rig
Is it worth using 1066 or better ram? anyone got any info? ppd versus ramspeed?
from what I've heard ram makes almost no difference in ppd... in fact 2 of mine are using ddr2800, and with my cpu oc I have them at 740.... because the only dividers were below or above 800, and I didn't really care about ram oc's on dedicated folders..
would anyone have a problem with me trying to fold for this team ,if not how would i set it up,i dont want it to run in the Background i want it to run in my taskbar and i can view what going on i also will be running it on this PC the spec's are in my Sig
Please join us. You should install "Windows XP/2003/VistaQuote:
Originally Posted by XRogerX
System tray client installer with viewer"
http://folding.stanford.edu/English/Download#ntoc1
ok ty im now folding ty
Awesome and :welcome:Quote:
Originally Posted by XRogerX
its showing team 32, why is that i changed it but it not taken
Right click the system tray and go to configuration. You can reenter the team number. It is 36362.
ok i changed it but on the site its still showing that other team, oncei finish one it should change to this team right?
Quote:
Originally Posted by XRogerX
you need to stop and restart the client after you change the team number. then the next wu turned in will start going to the new team #... whatever you turned in already under that other team # is not going to change, it's already turned in. whwerever you turned it in, it's there for good. all you can do is change how your client turns in.. you can't go back and change wu's that have already been uploaded and counted.
start and stop your client.. it needs to restart with the new team #, it will not change it on the fly. it needs a restart to reread the client.cfg file where that info is stored, and it only reads it on start.
ok done ty
:up::welcome:Quote:
Originally Posted by XRogerX
well i dont know whats going on i had two going and they have been delete , i dont know if i did it or if there is a problem , is it what the log is saying
--- Opening Log file [December 12 19:20:25 UTC]
# Windows CPU Systray Edition #################################################
################################################## #############################
Folding@Home Client Version 6.23
http://folding.stanford.edu
################################################## #############################
################################################## #############################
Launch directory: C:\Documents and Settings\Roger\Application Data\Folding@home-x86
[19:21:31] - Ask before connecting: No
[19:21:31] - User name: XRogerX (Team 36362)
[19:21:31] - User ID not found locally
[19:21:31] + Requesting User ID from server
[19:21:31] - Machine ID: 1
[19:21:31]
[19:21:31] Work directory not found. Creating...
[19:21:31] Could not open work queue, generating new queue...
[19:21:32] Initialization complete
[19:21:32] - Preparing to get new work unit...
[19:21:32] + Attempting to get work packet
[19:21:32] - Connecting to assignment server
[19:21:32] - Successful: assigned to (171.64.122.136).
[19:21:32] + News From Folding@Home: Welcome to Folding@Home
[19:21:32] Loaded queue successfully.
[19:21:34] + Closed connections
[19:21:34]
[19:21:34] + Processing work unit
[19:21:34] Core required: FahCore_78.exe
[19:21:34] Core not found.
[19:21:34] - Core is not present or corrupted.
[19:21:34] - Attempting to download new core...
[19:21:34] + Downloading new core: FahCore_78.exe
[19:21:35] + 10240 bytes downloaded
[19:21:35] + 20480 bytes downloaded
[19:21:35] + 30720 bytes downloaded
[19:21:35] + 40960 bytes downloaded
[19:21:35] + 51200 bytes downloaded
[19:21:35] + 61440 bytes downloaded
[19:21:35] + 71680 bytes downloaded
[19:21:35] + 81920 bytes downloaded
[19:21:35] + 92160 bytes downloaded
[19:21:35] + 102400 bytes downloaded
[19:21:35] + 112640 bytes downloaded
[19:21:35] + 122880 bytes downloaded
[19:21:35] + 133120 bytes downloaded
[19:21:35] + 143360 bytes downloaded
[19:21:35] + 153600 bytes downloaded
[19:21:35] + 163840 bytes downloaded
[19:21:35] + 174080 bytes downloaded
[19:21:35] + 184320 bytes downloaded
[19:21:35] + 194560 bytes downloaded
[19:21:35] + 204800 bytes downloaded
[19:21:35] + 215040 bytes downloaded
[19:21:36] + 225280 bytes downloaded
[19:21:36] + 235520 bytes downloaded
[19:21:36] + 245760 bytes downloaded
[19:21:36] + 256000 bytes downloaded
[19:21:36] + 266240 bytes downloaded
[19:21:36] + 276480 bytes downloaded
[19:21:36] + 286720 bytes downloaded
[19:21:36] + 296960 bytes downloaded
[19:21:36] + 307200 bytes downloaded
[19:21:36] + 317440 bytes downloaded
[19:21:36] + 327680 bytes downloaded
[19:21:36] + 337920 bytes downloaded
[19:21:36] + 348160 bytes downloaded
[19:21:36] + 358400 bytes downloaded
[19:21:36] + 368640 bytes downloaded
[19:21:36] + 378880 bytes downloaded
[19:21:36] + 389120 bytes downloaded
[19:21:36] + 399360 bytes downloaded
[19:21:36] + 409600 bytes downloaded
[19:21:36] + 419840 bytes downloaded
[19:21:36] + 430080 bytes downloaded
[19:21:36] + 440320 bytes downloaded
[19:21:36] + 450560 bytes downloaded
[19:21:36] + 460800 bytes downloaded
[19:21:36] + 471040 bytes downloaded
[19:21:36] + 481280 bytes downloaded
[19:21:36] + 491520 bytes downloaded
[19:21:36] + 501760 bytes downloaded
[19:21:36] + 512000 bytes downloaded
[19:21:36] + 522240 bytes downloaded
[19:21:36] + 532480 bytes downloaded
[19:21:36] + 542720 bytes downloaded
[19:21:36] + 552960 bytes downloaded
[19:21:36] + 563200 bytes downloaded
[19:21:36] + 573440 bytes downloaded
[19:21:36] + 583680 bytes downloaded
[19:21:36] + 593920 bytes downloaded
[19:21:36] + 604160 bytes downloaded
[19:21:36] + 614400 bytes downloaded
[19:21:36] + 624640 bytes downloaded
[19:21:36] + 634880 bytes downloaded
[19:21:36] + 645120 bytes downloaded
[19:21:36] + 655360 bytes downloaded
[19:21:36] + 665600 bytes downloaded
[19:21:36] + 675840 bytes downloaded
[19:21:36] + 686080 bytes downloaded
[19:21:36] + 696320 bytes downloaded
[19:21:36] + 706560 bytes downloaded
[19:21:36] + 716800 bytes downloaded
[19:21:36] + 727040 bytes downloaded
[19:21:36] + 737280 bytes downloaded
[19:21:36] + 747520 bytes downloaded
[19:21:36] + 757760 bytes downloaded
[19:21:36] + 768000 bytes downloaded
[19:21:36] + 778240 bytes downloaded
[19:21:36] + 788480 bytes downloaded
[19:21:36] + 798720 bytes downloaded
[19:21:36] + 808960 bytes downloaded
[19:21:36] + 819200 bytes downloaded
[19:21:36] + 825633 bytes downloaded
[19:21:36] Verifying core Core_78.fah...
[19:21:36] Signature is VALID
[19:21:36]
[19:21:36] Trying to unzip core FahCore_78.exe
[19:21:36] Decompressed FahCore_78.exe (2338816 bytes) successfully
[19:21:41] + Core successfully engaged
[19:21:46]
[19:21:46] + Processing work unit
[19:21:46] Core required: FahCore_78.exe
[19:21:46] Core found.
[19:21:46] Working on queue slot 01 [December 12 19:21:46 UTC]
[19:21:46] + Working ...
[19:21:46]
[19:21:46] *------------------------------*
[19:21:46] Folding@Home Gromacs Core
[19:21:46] Version 1.90 (March 8, 2006)
[19:21:46]
[19:21:46] Preparing to commence simulation
[19:21:46] - Looking at optimizations...
[19:21:46] - Created dyn
[19:21:46] - Files status OK
[19:21:46] - Expanded 238665 -> 1191289 (decompressed 499.1 percent)
[19:21:46] - Starting from initial work packet
[19:21:46]
[19:21:46] Project: 2527 (Run 88, Clone 84, Gen 6)
[19:21:46]
[19:21:47] Assembly optimizations on if available.
[19:21:47] Entering M.D.
[19:21:53] Protein: p2527_Am22-43
[19:21:53]
[19:21:53] Writing local files
[19:21:53] Extra SSE boost OK.
[19:21:53] Writing local files
[19:21:53] Completed 0 out of 2000000 steps (0%)
[19:23:52] Opening http://fah-web.stanford.edu/cgi-bin/...&teamnum=36362...
[19:25:48] Opening C:\Documents and Settings\Roger\Application Data\Folding@home-x86\MyFolding.html...
[19:26:58] Opening http://fah-web.stanford.edu/cgi-bin/...ername=XRogerX...
[19:32:25] Opening http://fah-web.stanford.edu/cgi-bin/...ername=XRogerX...
[19:35:09] Writing local files
[19:35:09] Completed 20000 out of 2000000 steps (1%)
[19:35:45] Opening C:\Documents and Settings\Roger\Application Data\Folding@home-x86\MyFolding.html...
[19:48:24] Writing local files
[19:48:24] Completed 40000 out of 2000000 steps (2%)
[19:51:27] Opening C:\Documents and Settings\Roger\Application Data\Folding@home-x86\MyFolding.html...
[20:01:43] Writing local files
[20:01:43] Completed 60000 out of 2000000 steps (3%)
[20:15:01] Writing local files
[20:15:01] Completed 80000 out of 2000000 steps (4%)
[20:28:18] Writing local files
[20:28:18] Completed 100000 out of 2000000 steps (5%)
[20:41:36] Writing local files
[20:41:36] Completed 120000 out of 2000000 steps (6%)
[20:54:53] Writing local files
[20:54:53] Completed 140000 out of 2000000 steps (7%)
[21:08:10] Writing local files
[21:08:10] Completed 160000 out of 2000000 steps (8%)
[21:21:27] Writing local files
[21:21:27] Completed 180000 out of 2000000 steps (9%)
[21:34:45] Writing local files
[21:34:45] Completed 200000 out of 2000000 steps (10%)
[21:41:06] Opening http://fah-web.stanford.edu/cgi-bin/...ername=XRogerX...
[21:41:40] Opening C:\Documents and Settings\Roger\Application Data\Folding@home-x86\MyFolding.html...
[21:48:00] Writing local files
[21:48:00] Completed 220000 out of 2000000 steps (11%)
[21:52:46] Opening http://fah-web.stanford.edu/cgi-bin/...ername=XRogerX...
[21:54:40] + Paused
[22:06:26] + Working ...
[22:06:26] Suspending work thread...
[22:06:26] Resuming work thread...
[22:13:03] Writing local files
[22:13:03] Completed 240000 out of 2000000 steps (12%)
--- Opening Log file [December 12 22:21:07 UTC]
# Windows CPU Systray Edition #################################################
################################################## #############################
Folding@Home Client Version 6.23
http://folding.stanford.edu
################################################## #############################
################################################## #############################
Launch directory: C:\Documents and Settings\Roger\Application Data\Folding@home-x86
[22:21:07] - Ask before connecting: No
[22:21:07] - User name: XRogerX (Team 36362)
[22:21:07] - User ID: 51E19A292C3F3E86
[22:21:07] - Machine ID: 1
[22:21:07]
[22:21:07] Loaded queue successfully.
[22:21:07] Initialization complete
[22:21:07]
[22:21:07] + Processing work unit
[22:21:07] Core required: FahCore_78.exe
[22:21:07] Core found.
[22:21:07] Working on queue slot 01 [December 12 22:21:07 UTC]
[22:21:07] + Working ...
[22:21:07]
[22:21:07] *------------------------------*
[22:21:07] Folding@Home Gromacs Core
[22:21:07] Version 1.90 (March 8, 2006)
[22:21:07]
[22:21:07] Preparing to commence simulation
[22:21:07] - Ensuring status. Please wait.
[22:21:24] - Looking at optimizations...
[22:21:24] - Working with standard loops on this execution.
[22:21:24] - Previous termination of core was improper.
[22:21:24] - Files status OK
[22:21:25] - Expanded 238665 -> 1191289 (decompressed 499.1 percent)
[22:21:25]
[22:21:25] Project: 2527 (Run 88, Clone 84, Gen 6)
[22:21:25]
[22:21:25] Entering M.D.
[22:21:45] (Starting from checkpoint)
[22:21:45] Protein: p2527_Am22-43
[22:21:45]
[22:21:45] Writing local files
[22:21:45] Completed 240000 out of 2000000 steps (12%)
Folding@Home Client Shutdown.
--- Opening Log file [December 13 01:02:19 UTC]
# Windows CPU Systray Edition #################################################
################################################## #############################
Folding@Home Client Version 6.23
http://folding.stanford.edu
################################################## #############################
################################################## #############################
Launch directory: C:\Documents and Settings\Roger\Application Data\Folding@home-x86
[01:02:19] - Ask before connecting: No
[01:02:19] - User name: XRogerX (Team 36362)
[01:02:19] - User ID: 51E19A292C3F3E86
[01:02:19] - Machine ID: 1
[01:02:19]
[01:02:19] Loaded queue successfully.
[01:02:19] Initialization complete
[01:02:19]
[01:02:19] + Processing work unit
[01:02:19] Core required: FahCore_78.exe
[01:02:19] Core found.
[01:02:19] Working on queue slot 01 [December 13 01:02:19 UTC]
[01:02:19] + Working ...
[01:02:19]
[01:02:19] *------------------------------*
[01:02:19] Folding@Home Gromacs Core
[01:02:19] Version 1.90 (March 8, 2006)
[01:02:19]
[01:02:19] Preparing to commence simulation
[01:02:19] - Looking at optimizations...
[01:02:19] - Files status OK
[01:02:20] - Expanded 238665 -> 1191289 (decompressed 499.1 percent)
[01:02:20]
[01:02:20] Project: 2527 (Run 88, Clone 84, Gen 6)
[01:02:20]
[01:02:20] Assembly optimizations on if available.
[01:02:20] Entering M.D.
Folding@Home Client Shutdown.
--- Opening Log file [December 13 01:10:46 UTC]
# Windows CPU Systray Edition #################################################
################################################## #############################
Folding@Home Client Version 6.23
http://folding.stanford.edu
################################################## #############################
################################################## #############################
Launch directory: C:\Documents and Settings\Roger\Application Data\Folding@home-x86
[01:10:46] - Ask before connecting: No
[01:10:46] - User name: XRogerX (Team 36362)
[01:10:46] - User ID: 51E19A292C3F3E86
[01:10:46] - Machine ID: 1
[01:10:46]
[01:10:47] Loaded queue successfully.
[01:10:47] Initialization complete
[01:10:47]
[01:10:47] + Processing work unit
[01:10:47] Core required: FahCore_78.exe
[01:10:47] Core found.
[01:10:47] Working on queue slot 01 [December 13 01:10:47 UTC]
[01:10:47] + Working ...
[01:10:47]
[01:10:47] *------------------------------*
[01:10:47] Folding@Home Gromacs Core
[01:10:47] Version 1.90 (March 8, 2006)
[01:10:47]
[01:10:47] Preparing to commence simulation
[01:10:47] - Looking at optimizations...
[01:10:47] - Files status OK
[01:10:47] - Expanded 238665 -> 1191289 (decompressed 499.1 percent)
[01:10:47]
[01:10:47] Project: 2527 (Run 88, Clone 84, Gen 6)
[01:10:47]
[01:10:47] Assembly optimizations on if available.
[01:10:47] Entering M.D.
[01:11:07] (Starting from checkpoint)
[01:11:07] Protein: p2527_Am22-43
[01:11:07]
[01:11:07] Writing local files
[01:11:07] Completed 245845 out of 2000000 steps (12%)
[01:11:07] Extra SSE boost OK.
[01:11:13] Opening C:\Documents and Settings\Roger\Application Data\Folding@home-x86\MyFolding.html...
--- Opening Log file [December 13 01:20:23 UTC]
# Windows CPU Systray Edition #################################################
################################################## #############################
Folding@Home Client Version 6.23
http://folding.stanford.edu
################################################## #############################
################################################## #############################
Launch directory: C:\Documents and Settings\Roger\Application Data\Folding@home-x86
[01:20:23] - Ask before connecting: No
[01:20:23] - User name: XRogerX (Team 36362)
[01:20:23] - User ID: 51E19A292C3F3E86
[01:20:23] - Machine ID: 1
[01:20:23]
[01:20:23] Loaded queue successfully.
[01:20:23] Initialization complete
[01:20:23]
[01:20:23] + Processing work unit
[01:20:23] Core required: FahCore_78.exe
[01:20:23] Core found.
[01:20:23] Working on queue slot 01 [December 13 01:20:23 UTC]
[01:20:23] + Working ...
[01:20:23]
[01:20:23] *------------------------------*
[01:20:23] Folding@Home Gromacs Core
[01:20:23] Version 1.90 (March 8, 2006)
[01:20:23]
[01:20:23] Preparing to commence simulation
[01:20:23] - Ensuring status. Please wait.
[01:20:40] - Looking at optimizations...
[01:20:40] - Working with standard loops on this execution.
[01:20:40] - Previous termination of core was improper.
[01:20:40] - Files status OK
[01:20:41] - Expanded 238665 -> 1191289 (decompressed 499.1 percent)
[01:20:41]
[01:20:41] Project: 2527 (Run 88, Clone 84, Gen 6)
[01:20:41]
[01:20:41] Entering M.D.
[01:21:01] (Starting from checkpoint)
[01:21:01] Protein: p2527_Am22-43
[01:21:01]
[01:21:01] Writing local files
[01:21:01] Completed 245845 out of 2000000 steps (12%)
[01:41:42] Opening http://fah-web.stanford.edu/cgi-bin/...ername=XRogerX...
[01:56:59] Writing local files
[01:56:59] Completed 260000 out of 2000000 steps (13%)
[02:48:36] Writing local files
[02:48:36] Completed 280000 out of 2000000 steps (14%)
[03:40:02] Writing local files
[03:40:02] Completed 300000 out of 2000000 steps (15%)
[04:31:37] Writing local files
[04:31:37] Completed 320000 out of 2000000 steps (16%)
[05:07:07] Opening http://fah-web.stanford.edu/cgi-bin/...ername=XRogerX...
[05:14:33] Opening C:\Documents and Settings\Roger\Application Data\Folding@home-x86\MyFolding.html...
[05:15:59] Opening C:\Documents and Settings\Roger\Application Data\Folding@home-x86\MyFolding.html...
[05:22:46] Writing local files
[05:22:46] Completed 340000 out of 2000000 steps (17%)
[06:14:13] Writing local files
[06:14:13] Completed 360000 out of 2000000 steps (18%)
[07:04:55] Writing local files
[07:04:55] Completed 380000 out of 2000000 steps (19%)
[07:20:23] + Working...
[07:56:12] Writing local files
[07:56:12] Completed 400000 out of 2000000 steps (20%)
[08:46:59] Writing local files
[08:46:59] Completed 420000 out of 2000000 steps (21%)
[09:37:29] Writing local files
[09:37:29] Completed 440000 out of 2000000 steps (22%)
[10:27:57] Writing local files
[10:27:57] Completed 460000 out of 2000000 steps (23%)
[11:18:16] Writing local files
[11:18:17] Completed 480000 out of 2000000 steps (24%)
[12:07:34] Writing local files
[12:07:34] Completed 500000 out of 2000000 steps (25%)
[12:57:09] Writing local files
[12:57:09] Completed 520000 out of 2000000 steps (26%)
[13:20:23] + Working...
[13:22:08] Opening http://fah-web.stanford.edu/cgi-bin/...ername=XRogerX...
[13:27:21] Opening C:\Documents and Settings\Roger\Application Data\Folding@home-x86\MyFolding.html...
[13:47:10] Writing local files
[13:47:10] Completed 540000 out of 2000000 steps (27%)
[14:38:09] Writing local files
[14:38:09] Completed 560000 out of 2000000 steps (28%)
[15:29:05] Writing local files
[15:29:05] Completed 580000 out of 2000000 steps (29%)
[16:20:09] Writing local files
[16:20:09] Completed 600000 out of 2000000 steps (30%)
[17:11:26] Writing local files
[17:11:26] Completed 620000 out of 2000000 steps (31%)
[18:02:39] Writing local files
[18:02:39] Completed 640000 out of 2000000 steps (32%)
[18:53:53] Writing local files
[18:53:53] Completed 660000 out of 2000000 steps (33%)
[19:20:23] + Working...
[19:45:01] Writing local files
[19:45:01] Completed 680000 out of 2000000 steps (34%)
[20:36:08] Writing local files
[20:36:08] Completed 700000 out of 2000000 steps (35%)
[20:36:22] + Paused
--- Opening Log file [December 13 21:05:45 UTC]
# Windows CPU Systray Edition #################################################
################################################## #############################
Folding@Home Client Version 6.23
http://folding.stanford.edu
################################################## #############################
################################################## #############################
Launch directory: C:\Documents and Settings\Roger\Application Data\Folding@home-x86
[21:05:45] - Ask before connecting: No
[21:05:45] - User name: XRogerX (Team 36362)
[21:05:45] - User ID: 51E19A292C3F3E86
[21:05:45] - Machine ID: 1
[21:05:45]
[21:05:45] Loaded queue successfully.
[21:05:45] Initialization complete
[21:05:45]
[21:05:45] + Processing work unit
[21:05:45] Core required: FahCore_78.exe
[21:05:45] Core found.
[21:05:45] Working on queue slot 01 [December 13 21:05:45 UTC]
[21:05:45] + Working ...
[21:05:45]
[21:05:45] *------------------------------*
[21:05:45] Folding@Home Gromacs Core
[21:05:45] Version 1.90 (March 8, 2006)
[21:05:45]
[21:05:45] Preparing to commence simulation
[21:05:45] - Looking at optimizations...
[21:05:45] - Files status OK
[21:05:46] - Expanded 238665 -> 1191289 (decompressed 499.1 percent)
[21:05:46]
[21:05:46] Project: 2527 (Run 88, Clone 84, Gen 6)
[21:05:46]
[21:05:46] Assembly optimizations on if available.
[21:05:46] Entering M.D.
[21:06:06] (Starting from checkpoint)
[21:06:06] Protein: p2527_Am22-43
[21:06:06]
[21:06:06] Writing local files
[21:06:06] Completed 700000 out of 2000000 steps (35%)
[21:06:06] Extra SSE boost OK.
[21:20:03] Writing local files
[21:20:03] Completed 720000 out of 2000000 steps (36%)
[21:33:58] Writing local files
[21:33:58] Completed 740000 out of 2000000 steps (37%)
[21:45:00] Opening http://fah-web.stanford.edu/cgi-bin/...ername=XRogerX...
[21:47:55] Writing local files
[21:47:55] Completed 760000 out of 2000000 steps (38%)
[22:01:51] Writing local files
[22:01:51] Completed 780000 out of 2000000 steps (39%)
[22:15:46] Writing local files
[22:15:46] Completed 800000 out of 2000000 steps (40%)
[22:29:40] Writing local files
[22:29:40] Completed 820000 out of 2000000 steps (41%)
[22:43:33] Writing local files
[22:43:33] Completed 840000 out of 2000000 steps (42%)
[22:57:18] Writing local files
[22:57:18] Completed 860000 out of 2000000 steps (43%)
[23:11:01] Writing local files
[23:11:01] Completed 880000 out of 2000000 steps (44%)
[23:24:41] Writing local files
[23:24:41] Completed 900000 out of 2000000 steps (45%)
--- Opening Log file [December 13 23:43:58 UTC]
# Windows CPU Systray Edition #################################################
################################################## #############################
Folding@Home Client Version 6.23
http://folding.stanford.edu
################################################## #############################
################################################## #############################
Launch directory: C:\Documents and Settings\Roger\Application Data\Folding@home-x86
[23:43:58] - Ask before connecting: No
[23:43:58] - User name: XRogerX (Team 36362)
[23:43:58] - User ID: 51E19A292C3F3E86
[23:43:58] - Machine ID: 1
[23:43:58]
[23:43:58] Loaded queue successfully.
[23:43:58] Initialization complete
[23:43:58]
[23:43:58] + Processing work unit
[23:43:58] Core required: FahCore_78.exe
[23:43:58] Core found.
[23:43:58] Working on queue slot 01 [December 13 23:43:58 UTC]
[23:43:58] + Working ...
[23:43:58]
[23:43:58] *------------------------------*
[23:43:58] Folding@Home Gromacs Core
[23:43:58] Version 1.90 (March 8, 2006)
[23:43:58]
[23:43:58] Preparing to commence simulation
[23:43:58] - Ensuring status. Please wait.
[23:44:15] - Looking at optimizations...
[23:44:15] - Working with standard loops on this execution.
[23:44:15] - Previous termination of core was improper.
[23:44:15] - Files status OK
[23:44:15] - Expanded 238665 -> 1191289 (decompressed 499.1 percent)
[23:44:15]
[23:44:15] Project: 2527 (Run 88, Clone 84, Gen 6)
[23:44:15]
[23:44:15] Entering M.D.
[23:44:35] (Starting from checkpoint)
[23:44:35] Protein: p2527_Am22-43
[23:44:35]
[23:44:35] Writing local files
[23:44:35] Completed 900000 out of 2000000 steps (45%)
[00:23:37] Writing local files
[00:23:37] Completed 920000 out of 2000000 steps (46%)
[01:02:41] Writing local files
[01:02:41] Completed 940000 out of 2000000 steps (47%)
--- Opening Log file [December 14 02:15:54 UTC]
# Windows CPU Systray Edition #################################################
################################################## #############################
Folding@Home Client Version 6.23
http://folding.stanford.edu
################################################## #############################
################################################## #############################
Launch directory: C:\Documents and Settings\Roger\Application Data\Folding@home-x86
[02:15:54] - Ask before connecting: No
[02:15:54] - User name: XRogerX (Team 36362)
[02:15:54] - User ID: 51E19A292C3F3E86
[02:15:54] - Machine ID: 1
[02:15:54]
[02:15:54] Loaded queue successfully.
[02:15:54] Initialization complete
[02:15:54]
[02:15:54] + Processing work unit
[02:15:54] Core required: FahCore_78.exe
[02:15:54] Core found.
[02:15:54] Working on queue slot 01 [December 14 02:15:54 UTC]
[02:15:54] + Working ...
[02:15:55]
[02:15:55] *------------------------------*
[02:15:55] Folding@Home Gromacs Core
[02:15:55] Version 1.90 (March 8, 2006)
[02:15:55]
[02:15:55] Preparing to commence simulation
[02:15:55] - Looking at optimizations...
[02:15:55] - Files status OK
[02:15:55] - Expanded 238665 -> 1191289 (decompressed 499.1 percent)
[02:15:55]
[02:15:55] Project: 2527 (Run 88, Clone 84, Gen 6)
[02:15:55]
[02:15:55] Assembly optimizations on if available.
[02:15:55] Entering M.D.
[02:16:15] (Starting from checkpoint)
[02:16:15] Protein: p2527_Am22-43
[02:16:15]
[02:16:15] Writing local files
[02:16:15] Completed 946414 out of 2000000 steps (47%)
[02:16:15] Extra SSE boost OK.
[02:25:20] Writing local files
[02:25:20] Completed 960000 out of 2000000 steps (48%)
[02:38:42] Writing local files
[02:38:42] Completed 980000 out of 2000000 steps (49%)
[02:52:04] Writing local files
[02:52:04] Completed 1000000 out of 2000000 steps (50%)
[03:05:30] Writing local files
[03:05:30] Completed 1020000 out of 2000000 steps (51%)
[03:18:54] Writing local files
[03:18:54] Completed 1040000 out of 2000000 steps (52%)
[03:32:14] Writing local files
[03:32:14] Completed 1060000 out of 2000000 steps (53%)
[03:45:42] Writing local files
[03:45:42] Completed 1080000 out of 2000000 steps (54%)
[03:59:13] Writing local files
[03:59:13] Completed 1100000 out of 2000000 steps (55%)
[04:12:39] Writing local files
[04:12:39] Completed 1120000 out of 2000000 steps (56%)
[04:26:01] Writing local files
[04:26:01] Completed 1140000 out of 2000000 steps (57%)
[04:39:26] Writing local files
[04:39:26] Completed 1160000 out of 2000000 steps (58%)
[04:52:49] Writing local files
[04:52:49] Completed 1180000 out of 2000000 steps (59%)
[05:06:14] Writing local files
[05:06:14] Completed 1200000 out of 2000000 steps (60%)
[05:06:31] Opening C:\Documents and Settings\Roger\Application Data\Folding@home-x86\MyFolding.html...
[05:06:58] Opening http://fah-web.stanford.edu/cgi-bin/...ername=XRogerX...
[05:19:42] Writing local files
[05:19:42] Completed 1220000 out of 2000000 steps (61%)
[05:33:37] Writing local files
[05:33:37] Completed 1240000 out of 2000000 steps (62%)
[05:47:36] Writing local files
[05:47:36] Completed 1260000 out of 2000000 steps (63%)
[06:01:39] Writing local files
[06:01:39] Completed 1280000 out of 2000000 steps (64%)
[06:15:42] Writing local files
[06:15:42] Completed 1300000 out of 2000000 steps (65%)
[06:29:44] Writing local files
[06:29:44] Completed 1320000 out of 2000000 steps (66%)
[06:43:50] Writing local files
[06:43:50] Completed 1340000 out of 2000000 steps (67%)
[06:57:52] Writing local files
[06:57:52] Completed 1360000 out of 2000000 steps (68%)
[07:11:53] Writing local files
[07:11:53] Completed 1380000 out of 2000000 steps (69%)
[07:25:53] Writing local files
[07:25:53] Completed 1400000 out of 2000000 steps (70%)
[07:39:56] Writing local files
[07:39:56] Completed 1420000 out of 2000000 steps (71%)
[07:53:58] Writing local files
[07:53:58] Completed 1440000 out of 2000000 steps (72%)
[08:08:00] Writing local files
[08:08:00] Completed 1460000 out of 2000000 steps (73%)
--- Opening Log file [December 14 08:22:02 UTC]
# Windows CPU Systray Edition #################################################
################################################## #############################
Folding@Home Client Version 6.23
http://folding.stanford.edu
################################################## #############################
################################################## #############################
Launch directory: C:\Documents and Settings\Roger\Application Data\Folding@home-x86
[08:22:02] - Ask before connecting: No
[08:22:02] - User name: XRogerX (Team 36362)
[08:22:02] - User ID: 51E19A292C3F3E86
[08:22:02] - Machine ID: 1
[08:22:02]
[08:22:02] Loaded queue successfully.
[08:22:02] Initialization complete
[08:22:02]
[08:22:02] + Processing work unit
[08:22:02] Core required: FahCore_78.exe
[08:22:02] Core found.
[08:22:02] Working on queue slot 01 [December 14 08:22:02 UTC]
[08:22:02] + Working ...
[08:22:02]
[08:22:02] *------------------------------*
[08:22:02] Folding@Home Gromacs Core
[08:22:02] Version 1.90 (March 8, 2006)
[08:22:02]
[08:22:02] Preparing to commence simulation
[08:22:02] - Looking at optimizations...
[08:22:02] - Files status OK
[08:22:02] - Expanded 238665 -> 1191289 (decompressed 499.1 percent)
[08:22:03]
[08:22:03] Project: 2527 (Run 88, Clone 84, Gen 6)
[08:22:03]
[08:22:03] Assembly optimizations on if available.
[08:22:03] Entering M.D.
[08:22:23] (Starting from checkpoint)
[08:22:23] Protein: p2527_Am22-43
[08:22:23]
[08:22:23] Writing local files
[08:22:23] Completed 1460000 out of 2000000 steps (73%)
[08:22:23] Extra SSE boost OK.
[08:35:48] Writing local files
[08:35:48] Completed 1480000 out of 2000000 steps (74%)
[08:49:28] Writing local files
[08:49:28] Completed 1500000 out of 2000000 steps (75%)
[09:03:08] Writing local files
[09:03:08] Completed 1520000 out of 2000000 steps (76%)
[09:16:47] Writing local files
[09:16:47] Completed 1540000 out of 2000000 steps (77%)
[09:30:34] Writing local files
[09:30:34] Completed 1560000 out of 2000000 steps (78%)
[09:40:54] Opening C:\Documents and Settings\Roger\Application Data\Folding@home-x86\MyFolding.html...
[09:41:23] Opening http://fah-web.stanford.edu/cgi-bin/...ername=XRogerX...
[09:42:14] Opening C:\Documents and Settings\Roger\Application Data\Folding@home-x86\MyFolding.html...
[09:44:16] Writing local files
[09:44:16] Completed 1580000 out of 2000000 steps (79%)
[09:57:59] Writing local files
[09:57:59] Completed 1600000 out of 2000000 steps (80%)
[10:11:35] Writing local files
[10:11:35] Completed 1620000 out of 2000000 steps (81%)
[10:25:12] Writing local files
[10:25:12] Completed 1640000 out of 2000000 steps (82%)
[10:38:44] Writing local files
[10:38:44] Completed 1660000 out of 2000000 steps (83%)
[10:52:12] Writing local files
[10:52:12] Completed 1680000 out of 2000000 steps (84%)
[10:54:34] Opening http://fah-web.stanford.edu/cgi-bin/...ername=XRogerX...
[10:54:50] Opening C:\Documents and Settings\Roger\Application Data\Folding@home-x86\MyFolding.html...
[11:05:48] Writing local files
[11:05:48] Completed 1700000 out of 2000000 steps (85%)
--- Opening Log file [December 14 11:12:25 UTC]
# Windows CPU Systray Edition #################################################
################################################## #############################
Folding@Home Client Version 6.23
http://folding.stanford.edu
################################################## #############################
################################################## #############################
Launch directory: C:\Documents and Settings\Roger\Application Data\Folding@home-x86
[11:12:25] - Ask before connecting: No
[11:12:25] - User name: XRogerX (Team 36362)
[11:12:25] - User ID: 51E19A292C3F3E86
[11:12:25] - Machine ID: 1
[11:12:25]
[11:12:25] Loaded queue successfully.
[11:12:26] Initialization complete
[11:12:26]
[11:12:26] + Processing work unit
[11:12:26] Core required: FahCore_78.exe
[11:12:26] Core found.
[11:12:26] Working on queue slot 01 [December 14 11:12:26 UTC]
[11:12:26] + Working ...
[11:12:26]
[11:12:26] *------------------------------*
[11:12:26] Folding@Home Gromacs Core
[11:12:26] Version 1.90 (March 8, 2006)
[11:12:26]
[11:12:26] Preparing to commence simulation
[11:12:26] - Ensuring status. Please wait.
[11:12:43] - Looking at optimizations...
[11:12:43] - Working with standard loops on this execution.
[11:12:43] - Previous termination of core was improper.
[11:12:43] - Going to use standard loops.
[11:12:43] - Files status OK
[11:12:43] - Expanded 238665 -> 1191289 (decompressed 499.1 percent)
[11:12:43]
[11:12:43] Project: 2527 (Run 88, Clone 84, Gen 6)
[11:12:43]
[11:12:43] Entering M.D.
[11:13:03] (Starting from checkpoint)
[11:13:03] Protein: p2527_Am22-43
[11:13:03]
[11:13:03] Writing local files
[11:13:03] Completed 1700000 out of 2000000 steps (85%)
[11:52:54] Writing local files
[11:52:54] Completed 1720000 out of 2000000 steps (86%)
[12:32:48] Writing local files
[12:32:48] Completed 1740000 out of 2000000 steps (87%)
[13:12:49] Writing local files
[13:12:49] Completed 1760000 out of 2000000 steps (88%)
[13:52:17] Writing local files
[13:52:17] Completed 1780000 out of 2000000 steps (89%)
[14:31:37] Writing local files
[14:31:37] Completed 1800000 out of 2000000 steps (90%)
[15:11:01] Writing local files
[15:11:01] Completed 1820000 out of 2000000 steps (91%)
[15:50:27] Writing local files
[15:50:27] Completed 1840000 out of 2000000 steps (92%)
[16:29:45] Writing local files
[16:29:45] Completed 1860000 out of 2000000 steps (93%)
[16:46:51] Opening C:\Documents and Settings\Roger\Application Data\Folding@home-x86\MyFolding.html...
[17:09:00] Writing local files
[17:09:00] Completed 1880000 out of 2000000 steps (94%)
[17:12:26] + Working...
[17:48:12] Writing local files
[17:48:12] Completed 1900000 out of 2000000 steps (95%)
[17:48:12] - Checksums don't match (work/wudata_01.xtc)
[17:48:13] Premature end of file when checksumming (54308 bytes left)
[17:48:13] - Could not calculate checksum (work/wudata_01.xtc)
[17:48:14] Checksum not what expected.
[17:48:14]
[17:48:14] Folding@home Core Shutdown: FILE_IO_ERROR
[17:48:18] CoreStatus = 75 (117)
[17:48:18] Error opening or reading from a file.
[17:48:18] Deleting current work unit & continuing...
[17:48:22] - Preparing to get new work unit...
[17:48:22] + Attempting to get work packet
[17:48:22] - Connecting to assignment server
[17:48:25] - Successful: assigned to (171.64.65.111).
[17:48:25] + News From Folding@Home: Welcome to Folding@Home
[17:48:25] Loaded queue successfully.
[17:48:25] - Couldn't send HTTP request to server
[17:48:25] (Got status 503)
[17:48:25] + Could not connect to Work Server
[17:48:25] - Attempt #1 to get work failed, and no other work to do.
Waiting before retry.
[17:48:43] + Attempting to get work packet
[17:48:43] - Connecting to assignment server
[17:48:46] - Successful: assigned to (171.64.65.111).
[17:48:46] + News From Folding@Home: Welcome to Folding@Home
[17:48:46] Loaded queue successfully.
[17:48:50] + Closed connections
[17:48:55]
[17:48:55] + Processing work unit
[17:48:55] Core required: FahCore_81.exe
[17:48:55] Core not found.
[17:48:55] - Core is not present or corrupted.
[17:48:55] - Attempting to download new core...
[17:48:55] + Downloading new core: FahCore_81.exe
[17:48:57] + 10240 bytes downloaded
[17:48:57] + 20480 bytes downloaded
[17:48:57] + 30720 bytes downloaded
[17:48:57] + 40960 bytes downloaded
[17:48:58] + 51200 bytes downloaded
[17:48:58] + 61440 bytes downloaded
[17:48:58] + 71680 bytes downloaded
[17:48:58] + 81920 bytes downloaded
[17:48:58] + 92160 bytes downloaded
[17:48:59] + 102400 bytes downloaded
[17:48:59] + 112640 bytes downloaded
[17:48:59] + 122880 bytes downloaded
[17:48:59] + 133120 bytes downloaded
[17:48:59] + 143360 bytes downloaded
[17:48:59] + 153600 bytes downloaded
[17:48:59] + 163840 bytes downloaded
[17:48:59] + 174080 bytes downloaded
[17:48:59] + 184320 bytes downloaded
[17:48:59] + 194560 bytes downloaded
[17:49:00] + 204800 bytes downloaded
[17:49:00] + 215040 bytes downloaded
[17:49:00] + 225280 bytes downloaded
[17:49:00] + 235520 bytes downloaded
[17:49:00] + 245760 bytes downloaded
[17:49:00] + 256000 bytes downloaded
[17:49:00] + 266240 bytes downloaded
[17:49:00] + 276480 bytes downloaded
[17:49:00] + 286720 bytes downloaded
[17:49:00] + 296960 bytes downloaded
[17:49:00] + 307200 bytes downloaded
[17:49:00] + 317440 bytes downloaded
[17:49:00] + 327680 bytes downloaded
[17:49:00] + 337920 bytes downloaded
[17:49:00] + 348160 bytes downloaded
[17:49:01] + 358400 bytes downloaded
[17:49:01] + 368640 bytes downloaded
[17:49:01] + 378880 bytes downloaded
[17:49:01] + 389120 bytes downloaded
[17:49:01] + 399360 bytes downloaded
[17:49:01] + 409600 bytes downloaded
[17:49:01] + 419840 bytes downloaded
[17:49:01] + 430080 bytes downloaded
[17:49:01] + 440320 bytes downloaded
[17:49:01] + 450560 bytes downloaded
[17:49:01] + 460800 bytes downloaded
[17:49:01] + 471040 bytes downloaded
[17:49:01] + 481280 bytes downloaded
[17:49:01] + 491520 bytes downloaded
[17:49:01] + 501760 bytes downloaded
[17:49:01] + 512000 bytes downloaded
[17:49:01] + 522240 bytes downloaded
[17:49:01] + 532480 bytes downloaded
[17:49:01] + 542720 bytes downloaded
[17:49:01] + 552960 bytes downloaded
[17:49:01] + 563200 bytes downloaded
[17:49:01] + 573440 bytes downloaded
[17:49:01] + 583680 bytes downloaded
[17:49:01] + 593920 bytes downloaded
[17:49:02] + 604160 bytes downloaded
[17:49:02] + 614400 bytes downloaded
[17:49:02] + 624640 bytes downloaded
[17:49:02] + 634880 bytes downloaded
[17:49:02] + 645120 bytes downloaded
[17:49:02] + 655360 bytes downloaded
[17:49:02] + 665600 bytes downloaded
[17:49:02] + 675840 bytes downloaded
[17:49:02] + 686080 bytes downloaded
[17:49:02] + 696320 bytes downloaded
[17:49:02] + 706560 bytes downloaded
[17:49:02] + 716800 bytes downloaded
[17:49:02] + 727040 bytes downloaded
[17:49:02] + 737280 bytes downloaded
[17:49:02] + 747520 bytes downloaded
[17:49:02] + 757760 bytes downloaded
[17:49:02] + 768000 bytes downloaded
[17:49:02] + 778240 bytes downloaded
[17:49:02] + 788480 bytes downloaded
[17:49:02] + 798720 bytes downloaded
[17:49:02] + 808960 bytes downloaded
[17:49:02] + 819200 bytes downloaded
[17:49:02] + 825684 bytes downloaded
[17:49:02] Verifying core Core_81.fah...
[17:49:02] Signature is VALID
[17:49:02]
[17:49:02] Trying to unzip core FahCore_81.exe
[17:49:02] Decompressed FahCore_81.exe (2396160 bytes) successfully
[17:49:07] + Core successfully engaged
[17:49:12]
[17:49:12] + Processing work unit
[17:49:12] Core required: FahCore_81.exe
[17:49:12] Core found.
[17:49:12] Working on queue slot 02 [December 14 17:49:12 UTC]
[17:49:12] + Working ...
[17:49:12]
[17:49:12] *------------------------------*
[17:49:12] Folding@Home Gromacs Simulated Tempering Core
[17:49:12] Version 1.10 (Oct 4, 2007)
[17:49:12]
[17:49:12] Preparing to commence simulation
[17:49:12] - Looking at optimizations...
[17:49:12] - Previous termination of core was improper.
[17:49:12] - Files status OK
[17:49:13] - Expanded 468011 -> 2292782 (decompressed 489.8 percent)
[17:49:13] - Starting from initial work packet
[17:49:13]
[17:49:13] Project: 4105 (Run 36, Clone 2, Gen 24)
[17:49:13]
[17:49:13] Entering M.D.
[17:49:19] Protein: p4105_villinwt_unf_Amber03_Extended
[17:49:19]
[17:49:19] Writing local files
[17:49:19] Writing local files
[17:49:19] Completed 0 out of 1500000 steps (0%)
[17:58:05] Writing local files
[18:02:06] Completed 15000 out of 250000 steps (6%)
[18:13:15] Writing checkpoint files
[18:20:23] Writing local files
[18:20:23] Completed 17500 out of 250000 steps (7%)
[18:28:24] Writing checkpoint files
[18:38:38] Writing local files
[18:38:38] Completed 20000 out of 250000 steps (8%)
[18:43:34] Writing checkpoint files
[18:52:43] Opening C:\Documents and Settings\Roger\Application Data\Folding@home-x86\MyFolding.html...
[18:52:56] Opening http://fah-web.stanford.edu/cgi-bin/...ername=XRogerX...
[18:56:18] Opening http://fah-web.stanford.edu/cgi-bin/...ername=XRogerX...
[18:56:53] Writing local files
[18:56:53] Completed 22500 out of 250000 steps (9%)
[18:58:45] Writing checkpoint files
[19:02:01] Opening http://fah-web.stanford.edu/cgi-bin/...&teamnum=36362...
[19:13:53] Writing checkpoint files
[19:15:10] Writing local files
[19:15:10] Completed 25000 out of 250000 steps (10%)
[19:26:13] Opening C:\Documents and Settings\Roger\Application Data\Folding@home-x86\MyFolding.html...
[19:29:20] Opening http://fah-web.stanford.edu/cgi-bin/...ername=XRogerX...
[20:06:36] Opening http://fah-web.stanford.edu/cgi-bin/...ername=XRogerX...
[20:22:37] Opening http://fah-web.stanford.edu/cgi-bin/...&teamnum=36362...
[20:22:48] Opening http://fah-web.stanford.edu/cgi-bin/...ername=XRogerX...
[21:05:37] Opening C:\Documents and Settings\Roger\Application Data\Folding@home-x86\MyFolding.html...
[21:05:46] Opening http://fah-web.stanford.edu/cgi-bin/...ername=XRogerX...
[21:49:23] Opening C:\Documents and Settings\Roger\Application Data\Folding@home-x86\MyFolding.html...
[23:12:26] + Working...
Folding@Home Client Shutdown.
--- Opening Log file [December 15 07:50:38 UTC]
# Windows CPU Systray Edition #################################################
################################################## #############################
Folding@Home Client Version 6.23
http://folding.stanford.edu
################################################## #############################
################################################## #############################
Launch directory: C:\Documents and Settings\Roger\Application Data\Folding@home-x86
[07:50:38] - Ask before connecting: No
[07:50:38] - User name: XRogerX (Team 36362)
[07:50:38] - User ID: 51E19A292C3F3E86
[07:50:38] - Machine ID: 1
[07:50:38]
[07:50:38] Loaded queue successfully.
[07:50:38] Initialization complete
[07:50:38]
[07:50:38] + Processing work unit
[07:50:38] Core required: FahCore_82.exe
[07:50:38] Core not found.
[07:50:38] - Core is not present or corrupted.
[07:50:38] - Attempting to download new core...
[07:50:38] + Downloading new core: FahCore_82.exe
[07:50:40] + 10240 bytes downloaded
[07:50:40] + 20480 bytes downloaded
[07:50:40] + 30720 bytes downloaded
[07:50:40] + 40960 bytes downloaded
[07:50:40] + 51200 bytes downloaded
[07:50:40] + 61440 bytes downloaded
[07:50:40] + 71680 bytes downloaded
[07:50:40] + 81920 bytes downloaded
[07:50:40] + 92160 bytes downloaded
[07:50:40] + 102400 bytes downloaded
[07:50:40] + 112640 bytes downloaded
[07:50:40] + 122880 bytes downloaded
[07:50:40] + 133120 bytes downloaded
[07:50:41] + 143360 bytes downloaded
[07:50:41] + 153600 bytes downloaded
[07:50:41] + 163840 bytes downloaded
[07:50:41] + 174080 bytes downloaded
[07:50:41] + 184320 bytes downloaded
[07:50:41] + 194560 bytes downloaded
[07:50:41] + 204800 bytes downloaded
[07:50:41] + 215040 bytes downloaded
[07:50:41] + 225280 bytes downloaded
[07:50:41] + 235520 bytes downloaded
[07:50:41] + 245760 bytes downloaded
[07:50:41] + 256000 bytes downloaded
[07:50:41] + 266240 bytes downloaded
[07:50:41] + 276480 bytes downloaded
[07:50:41] + 286720 bytes downloaded
[07:50:41] + 296960 bytes downloaded
[07:50:41] + 307200 bytes downloaded
[07:50:41] + 317440 bytes downloaded
[07:50:41] + 327680 bytes downloaded
[07:50:41] + 337920 bytes downloaded
[07:50:41] + 348160 bytes downloaded
[07:50:41] + 358400 bytes downloaded
[07:50:41] + 368640 bytes downloaded
[07:50:41] + 378880 bytes downloaded
[07:50:41] + 389120 bytes downloaded
[07:50:41] + 399360 bytes downloaded
[07:50:41] + 409600 bytes downloaded
[07:50:41] + 419840 bytes downloaded
[07:50:41] + 430080 bytes downloaded
[07:50:41] + 440320 bytes downloaded
[07:50:41] + 450560 bytes downloaded
[07:50:41] + 460800 bytes downloaded
[07:50:41] + 471040 bytes downloaded
[07:50:41] + 481280 bytes downloaded
[07:50:41] + 491520 bytes downloaded
[07:50:41] + 501760 bytes downloaded
[07:50:41] + 512000 bytes downloaded
[07:50:41] + 522240 bytes downloaded
[07:50:41] + 532480 bytes downloaded
[07:50:41] + 542720 bytes downloaded
[07:50:41] + 552960 bytes downloaded
[07:50:41] + 563200 bytes downloaded
[07:50:41] + 573440 bytes downloaded
[07:50:41] + 583680 bytes downloaded
[07:50:41] + 593920 bytes downloaded
[07:50:41] + 604160 bytes downloaded
[07:50:41] + 614400 bytes downloaded
[07:50:41] + 624640 bytes downloaded
[07:50:41] + 634880 bytes downloaded
[07:50:41] + 645120 bytes downloaded
[07:50:41] + 655360 bytes downloaded
[07:50:41] + 665600 bytes downloaded
[07:50:41] + 675840 bytes downloaded
[07:50:41] + 686080 bytes downloaded
[07:50:41] + 696320 bytes downloaded
[07:50:41] + 706560 bytes downloaded
[07:50:41] + 716479 bytes downloaded
[07:50:41] Verifying core Core_82.fah...
[07:50:41] Signature is VALID
[07:50:41]
[07:50:41] Trying to unzip core FahCore_82.exe
[07:50:41] Decompressed FahCore_82.exe (1683456 bytes) successfully
[07:50:46] + Core successfully engaged
[07:50:52]
[07:50:52] + Processing work unit
[07:50:52] Core required: FahCore_82.exe
[07:50:52] Core found.
[07:50:52] Working on queue slot 03 [December 15 07:50:52 UTC]
[07:50:52] + Working ...
[07:50:52]
[07:50:52] *------------------------------*
[07:50:52] Folding@Home PMD Core
[07:50:52] Version 1.03 (September 7, 2005)
[07:50:52]
[07:50:52] Preparing to commence simulation
[07:50:52] - Looking at optimizations...
[07:50:52] - Files status OK
[07:50:52] - Expanded 600981 -> 4231059 (decompressed 704.0 percent)
[07:50:52]
[07:50:52] Project: 897 (Run 2, Clone 347, Gen 6)
[07:50:52]
[07:50:52] Assembly optimizations on if available.
[07:50:52] Entering M.D.
[07:50:59] Protein: p897_NIFKcomplex_p897
[07:50:59]
[07:50:59] Completed 0 out of 250000 steps (0%)
[08:05:54] Writing checkpoint files
[08:11:56] Writing local files
[08:11:56] Completed 2500 out of 250000 steps (1%)
[08:21:00] Writing checkpoint files
[08:32:55] Writing local files
[08:32:55] Completed 5000 out of 250000 steps (2%)
[08:36:04] Writing checkpoint files
[08:51:09] Writing checkpoint files
[08:53:53] Writing local files
[08:53:53] Completed 7500 out of 250000 steps (3%)
[09:06:17] Writing checkpoint files
[09:14:54] Writing local files
[09:14:54] Completed 10000 out of 250000 steps (4%)
[09:21:30] Writing checkpoint files
[09:36:08] Writing local files
[09:36:08] Completed 12500 out of 250000 steps (5%)
[09:36:33] Writing checkpoint files
[09:45:29] Opening C:\Documents and Settings\Roger\Application Data\Folding@home-x86\MyFolding.html...
[09:51:39] Writing checkpoint files
[09:57:18] Writing local files
[09:57:18] Completed 15000 out of 250000 steps (6%)
[10:06:40] Writing checkpoint files
[10:18:39] Writing local files
[10:18:39] Completed 17500 out of 250000 steps (7%)
[10:21:51] Writing checkpoint files
[10:36:52] Writing checkpoint files
[10:40:05] Writing local files
[10:40:05] Completed 20000 out of 250000 steps (8%)
--- Opening Log file [December 15 14:44:27 UTC]
# Windows CPU Systray Edition #################################################
################################################## #############################
Folding@Home Client Version 6.23
http://folding.stanford.edu
################################################## #############################
################################################## #############################
Launch directory: C:\Documents and Settings\Roger\Application Data\Folding@home-x86
[14:44:27] - Ask before connecting: No
[14:44:27] - User name: XRogerX (Team 36362)
[14:44:27] - User ID: 51E19A292C3F3E86
[14:44:27] - Machine ID: 1
[14:44:27]
[14:44:27] Loaded queue successfully.
[14:44:27] Initialization complete
[14:44:27]
[14:44:27] + Processing work unit
[14:44:27] Core required: FahCore_82.exe
[14:44:27] Core found.
[14:44:27] Working on queue slot 03 [December 15 14:44:27 UTC]
[14:44:27] + Working ...
[14:44:28]
[14:44:28] *------------------------------*
[14:44:28] Folding@Home PMD Core
[14:44:28] Version 1.03 (September 7, 2005)
[14:44:28]
[14:44:28] Preparing to commence simulation
[14:44:28] - Ensuring status. Please wait.
[14:44:45] - Looking at optimizations...
[14:44:45] - Working with standard loops on this execution.
[14:44:45] - Previous termination of core was improper.
[14:44:45] - Files status OK
[14:44:45] - Expanded 600981 -> 4231059 (decompressed 704.0 percent)
[14:44:45]
[14:44:45] Project: 897 (Run 2, Clone 347, Gen 6)
[14:44:45]
[14:44:45] Entering M.D.
[14:44:52] Protein: p897_NIFKcomplex_p897
[14:44:52]
[14:44:52] Completed 19625 out of 250000 steps (7%)
[14:47:35] Writing local files
[14:47:35] Completed 20000 out of 250000 steps (8%)
[14:59:46] Writing checkpoint files
[15:04:16] Opening http://fah-web.stanford.edu/cgi-bin/...ername=XRogerX...
[15:05:47] Writing local files
[15:05:47] Completed 22500 out of 250000 steps (9%)
[15:14:53] Writing checkpoint files
[15:24:01] Writing local files
[15:24:01] Completed 25000 out of 250000 steps (10%)
[15:30:02] Writing checkpoint files
[15:42:16] Writing local files
[15:42:16] Completed 27500 out of 250000 steps (11%)
[15:45:11] Writing checkpoint files
[16:00:17] Writing checkpoint files
[16:00:28] Writing local files
[16:00:28] Completed 30000 out of 250000 steps (12%)
--- Opening Log file [December 15 17:44:50 UTC]
# Windows CPU Systray Edition #################################################
################################################## #############################
Folding@Home Client Version 6.23
http://folding.stanford.edu
################################################## #############################
################################################## #############################
Launch directory: C:\Documents and Settings\Roger\Application Data\Folding@home-x86
[17:44:50] - Ask before connecting: No
[17:44:50] - User name: XRogerX (Team 36362)
[17:44:50] - User ID: 51E19A292C3F3E86
[17:44:50] - Machine ID: 1
[17:44:50]
[17:44:50] Loaded queue successfully.
[17:44:50] Initialization complete
[17:44:50]
[17:44:50] + Processing work unit
[17:44:50] Core required: FahCore_82.exe
[17:44:50] Core found.
[17:44:50] Working on queue slot 03 [December 15 17:44:50 UTC]
[17:44:50] + Working ...
[17:44:50]
[17:44:50] *------------------------------*
[17:44:50] Folding@Home PMD Core
[17:44:50] Version 1.03 (September 7, 2005)
[17:44:50]
[17:44:50] Preparing to commence simulation
[17:44:50] - Ensuring status. Please wait.
[17:45:07] - Looking at optimizations...
[17:45:07] - Working with standard loops on this execution.
[17:45:07] - Previous termination of core was improper.
[17:45:07] - Going to use standard loops.
[17:45:07] - Files status OK
[17:45:07] - Expanded 600981 -> 4231059 (decompressed 704.0 percent)
[17:45:07]
[17:45:07] Project: 897 (Run 2, Clone 347, Gen 6)
[17:45:07]
[17:45:07] Entering M.D.
[17:45:14] Protein: p897_NIFKcomplex_p897
[17:45:14]
[17:45:14] Completed 29975 out of 250000 steps (11%)
[17:45:25] Opening http://fah-web.stanford.edu/cgi-bin/...ername=XRogerX...
[17:45:27] Writing local files
[17:45:27] Completed 30000 out of 250000 steps (12%)
New to folding, got the GPU running but have not joined a team.
How can i join the XS team?
My OS is Vista 64bit, what SMP client can be used?
Also can the GPU and SMP run at the same time?
Thanks,