** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P

Here it is. Just find this on your everest, and you will be able to configure your OSD (I don't know if on english versions, it is called OSD too...)

http://img413.imageshack.us/img413/7120/osdvo1.jpg

Hope it helps,

[]'s
Simps

Thanks

The only bad thing is that the Everest I have doesn't read the volts on the UD3P :(

That is strange. It should. Go to OSD items or so. There are a lot of OSD items you can add. Maybe your voltages are just not selected there...

I found the place were I select what I want to display, but it doesn't detect my volts, it doesn't detect them in the senors tab either :(. I could get a BETA version that does, but its a trail edition.

Your version is probably old, or limited. Everest is cheap, you can go for the 4.60 ultimate version. That is a must. That is the only program I use to monitor my pc / overclock. I does everything.

I have version 4.6.

how do you manually set pl level? is there a way besides changing that one setting from turbo to extreme?

545 seems stable at 1.22cpu term and 1.26nb but its pl 11 lol.. help !

here are some results with my ud3r.....im selling this e8400 pm me if you want it http://www.xtremesystems.org/forums/...1&d=1227678191

Why are u selling ur E8400?

Quote:

Originally Posted by fatguy1992

Why are u selling ur E8400?

im just thinking of going quad or maybe i7 got a few p4,s lying around to hold me over till i decide what im doing....remember those 2 sticks of cellshocks i was selling..ask radaja about em he put em side by side with his other 2 sticks cellshocks on his ud3p and all 4 sticks booted to 1200mhz with out any change of the bios......i only sell good stuff just like this cpu i can give any one the bios settings i used on my ud3r and this bad boy will fire up at 4.45 ghz at 3.44 volts on any ud3r or p...and with only 3.44.v theres more overclocking head room left in this chip and could be good for bench marking

I'd buy ur E8400 but...

I have a E8500 on its way (with my phase change) and I had to borrow the money for that so...

Quote:

Originally Posted by Jor3lBR

Hi Guys,

Decided to bench on AIR with a normal priced air cooler (below$35) to keep peoples hopes up on this amazing cpu.

All low volts for people that want 24/7 use: 1.376vcore, 1.400vtt, 1.57pll, 1.40vnb, 1.20vsb (except ram that I needed more juice to keep tight timings and 5:6 strap).

[System Setup]
CPU: Q9650@4400Mhz 489x9 1.376vcore on load and idle 1.40vtt
Mobo: Gigabyte EP45-UD3P
Cooler: Sunbeam Core Contact Freezer
Ram: 4gb G.Skill Pi 9600
Video: X1300
PSU: OCZ Powerstream 520w Adj

[Setup Pics]
http://i44.tinypic.com/1zzt3ld.jpg**************http://i44.tinypic.com/2aj5s2c.jpg

[BIOS Template for Gigabyte Users]

Code:

******Gigabyte EP45 UD3P****** Q9650 489 X 9 4401MHz Robust Graphics Booster.........................[ Auto ] CPU Clock Ratio.................................[ 9 ] Fine CPU Clock Ratio............................[ 0 ] CPU Frequency 4.35GHz...........................[ 489 x 9 ] ******Clock Chip Control****** CPU Host Clock Control..........................[ Enabled ] CPU Host Frequency (Mhz)........................[ 489 ] PCI Express Frequency (Mhz).....................[ 100 ] C.I.A 2 [Disabled] ******Advanced Clock Control****** CPU Clock Drive.................................[ 1000mv ] PCI Express Clock Drive.........................[ 1000mv ] CPU Clock Skew..................................[ 0ps ] MCH Clock Skew..................................[ 50ps ] ******DRAM Performance Control****** Performance Enhance [Standard] Extreme Memory Profile (XMP)....................[ Disabled ] (G) MCH Frequency Latch.........................[ 333MHz ] System Memory Multipler.........................[ 2.40 ] Memory Frequency 1066...........................[ 1174 ] DRAM Timing Selectable..........................[ Manual ] CAS Latency Time................................[ 5 ] tRCD............................................[ 5 ] tRP.............................................[ 5 ] tRAS............................................[ 15 ] ******Advanced Timing Control****** tRRD............................................[ Auto ] tWTR............................................[ Auto ] tWR.............................................[ Auto ] tRFC............................................[ 52 ] tRTP............................................[ Auto ] Command Rate (cmd)..............................[ Auto ] ******Channel A Timing Settings****** Static tRead Value [ 7 ] ................[ 8 ] tRD Phase0 Adjustment [ 0 ] ................[ Auto ] tRD Phase1 Adjustment [ 0 ] ................[ Auto ] tRD Phase2 Adjustment [ 0 ] ................[ Auto ] tRD Phase3 Adjustment [ 0 ] ................[ Auto ] tRD 2rd (Differnt Rank) [ 8 ] ................[ Auto ] tWR 2wr (Differnt Rank) [ 8 ] ................[ Auto ] tWR 2rd (Differnt Rank) [ 7 ] ................[ Auto ] tRD 2wr (Same/Difft Rank) [ 9 ] ................[ Auto ] Dimm 1 Clock Skew Control.......................[ Auto ] Dimm 2 Clock Skew Control.......................[ Auto ] DDR Write Training..............................[ Auto ] ******Channel A Driving Settings****** Drive Strength Profile..........................[ OC-1333 ] Data Driving Pull Up Level......................[ Auto ] cmd Driving Pull Up Level.......................[ Auto ] ctrl Driving Pull Up Level......................[ Auto ] clk Driving Pull Up Level.......................[ Auto ] Data Driving Pull Down Level....................[ Auto ] cmd Driving Pull Down Level.....................[ Auto ] ctrl Driving Pull Down Level....................[ Auto ] clk Driving Pull Down Level.....................[ Auto ] ******Channel B Timing Settings****** Static tRead Value [ 6 ] ................[ 8 ] tRD Phase0 Adjustment [ 0 ] ................[ Auto ] tRD Phase1 Adjustment [ 0 ] ................[ Auto ] tRD Phase2 Adjustment [ 0 ] ................[ Auto ] tRD Phase3 Adjustment [ 0 ] ................[ Auto ] tRD 2rd (Differnt Rank) [ 8 ] ................[ Auto ] tWR 2wr (Differnt Rank) [ 8 ] ................[ Auto ] tWR 2rd (Differnt Rank) [ 7 ] ................[ Auto ] tRD 2wr (Same/Difft Rank) [ 9 ] ................[ Auto ] Dimm 1 Clock Skew Control.......................[ Auto ] Dimm 2 Clock Skew Control.......................[ Auto ] DDR Write Training..............................[ Auto ] ******Channel B Driving Settings****** Drive Strength Profile..........................[ OC-1333 ] Data Driving Pull Up Level......................[ Auto ] cmd Driving Pull Up Level.......................[ Auto ] ctrl Driving Pull Up Level......................[ Auto ] clk Driving Pull Up Level.......................[ Auto ] Data Driving Pull Down Level....................[ Auto ] cmd Driving Pull Down Level.....................[ Auto ] ctrl Driving Pull Down Level....................[ Auto ] clk Driving Pull Down Level.....................[ Auto ] ******Motherboard Voltage Control****** Load-Line Calibration [Enabled] CPU Vcore [ 1.23750 ]...................[ 1.41250 ] CPU Termination [ 1.20 ]...................[ 1.40 ] CPU PLL [ 1.50 ]...................[ 1.570 ] CPU Reference [ 0.766 ]...................[ 0.871 OR 0.886 ] MCH Core [1.1 ]...................[ 1.400 ] MCH Reference [0.760 ]...................[ 0.926 ] MCH/DRAM Refernce [0.900 ]...................[ 1.150 ] ICH I/O [1.500 ]...................[ 1.570 ] ICH Core [1.100 ]...................[ 1.200 ] DRAM Voltage [1.800 ]...................[ 2.300 ] DRAM Termination [0.900 ]...................[ 1.150 ] Channel A Ref [0.900 ]...................[ 1.150 ] Channel B Ref [0.900 ]...................[ 1.150 ] ******Advanced BIOS Features****** CPU Multithreading..............................[ Disabled ] Limit CPUID Max to 3............................[ Disabled ] No-Execute memory Protect.......................[ Disabled ] CPU Enhance Halt (CIE)..........................[ Disabled ] C2/C2E State Support............................[ Disabled ] C4/C4E State Support............................[ Disabled ] CPU Thermal Monitor.............................[ Disabled ] CPU EIST Function...............................[ Disabled ] Virtualization Technology.......................[ Disabled ]

[Stability Test Prime95 Blend]

3 hrs Load:
http://i40.tinypic.com/2iusrhv.jpg

11 hrs Idle:
http://i40.tinypic.com/302ti04.jpg

Hope this helps Q9650 and Gigabyte UD3P users! :up:

Nice work! What bios are you using?

Quote:

Originally Posted by Rattle

how do you manually set pl level? is there a way besides changing that one setting from turbo to extreme?

545 seems stable at 1.22cpu term and 1.26nb but its pl 11 lol.. help !

Static tRead Value = PL level on these boards

Quote:

Originally Posted by Jor3lBR

Thanks for looking into this panging :up: I tried everything but it's a still no go, probably I need 1Gb sticks it may be ram related.

Using 333/2:40b strap if I boot with NORMAL on MCH volts it will get in Windows with 1.1vmch :ROTF: and if I try to raise to 1.5vmch on ET6 = Instant OS Freeze. Again if I raise in increments to 1.440vmch everything will go fine but after that freeze in OS or no boot in DOS :shakes:

If I boot on AUTO (Mch core) it will double boot and restore defaults, probably because it's trying to set it above 1.440mch.

Funny thing is nobody on Gigabyte seams to have an answer for this.

Oh before I forget I have 2 boards and tried this on like 4 boards. Versions 1.0rev and 1.1rev.

I will try 1Gb sticks and see.

You're welcome and thanks for the info.

i personally never think these UD3P/R boards overvolt the vdimm settings so i never checked it with a DMM, but this mostly because one of my friend has already checked it and told me back when we first got our first boards.

as for vdimm voltage that are reported by software, which i use Everest's or ET6's HW monitor,
one of my UD3R has, for example, if i set vdimm 2.28V at bios i will see during idle in Windows 2.26xxV,
but my another UD3R will be 2.30V in Windows. and since i believe the boards don't overvolt the vdimm settings i really don't concern much on the real vdimm voltage value.

anyways, i'm still interested to know about the G.Skill 9600 PI kit under this UD3P or R board,
can you please check and see if you can overclock this ram kit to DDR1200 and using its rated voltage spec (or lower) and if possible, please try it all, at 375fsb, 400fsb, 450fsb and 480fsb?

I just woke up, stop priming and got this on my Maximus II Formula.
Anyway, can some of you guys with quads help on the comparison?

quadcore 500FSB
7h prime blend + 20 IBT loops on max stress
http://img80.imageshack.us/img80/5244/new50013wu3.jpg

[]'s
Simps

i supposed that's looking good.
but why you post that in here? lol.

Can't get past 3.8???

The following settings give me a BSOD before entering Windows:

I am using BIOS F7c
Now, if I just change the the FSB to 400 and manualy enter my RAM timings and keep everything else on auto. I can boot into Windows and am prime stable for 3 hours...?

What do you think?

There are so many variables.

I also tried the settings listed a page or so back and could not get it to POST.

Code:

MB Intelligent Tweaker(M.I.T.) Robust Graphics Booster ...............: FAST CPU Clock Ratio .......................: 9 Fine CPU Clock Ratio...................: 0.5 CPU Frequency .........................: 3.80GHz (400X9.5) Clock Chip Control Standard Clock Control CPU Host Clock Control.................: [Enabled] CPU Host Frequency (Mhz) ..............: 400 PCI Express Frequency (Mhz) ...........: 100 C.I.A.2 ...............................: [Disabled] Advanced Clock Control [Press Enter] CPU Clock Drive........................: 800mV PCI Express Clock Drive................: 900mV CPU Clock Skew (ps)....................: 0ps MCH Clock Skew (ps)....................: 0ps DRAM Performance Control Performance Enhance....................: [STANDARD] Extreme Memory Profile (X.M.P.)........: [Disabled] (G)MCH Frequency Latch.................: [AUTO] System Memory Multiplier ..............: 2.66D Memory Frequency (Mhz) ................: 1066 DRAM Timing Selectable ................: [Manual] Standard Timing Control CAS Latency Time.......................: 5 tRCD ..................................: 5 tRP'...................................: 5 tRAS...................................: 15 Advanced Timing Control tRRD...................................: 4 tWTR...................................: 4 tWR....................................: 5 tRFC...................................: 62 tRTP...................................: 4 Command Rate (CMD) ....................: 2 Driving Strength Profiles Driving Strength ......................: 1066 Channel A Static tRead Value.....................: 10 tRD Phase0 Adjustment..................: 0 [AUTO] tRD Phase1 Adjustment..................: 0 [AUTO] tRD Phase2 Adjustment .................: 0 [AUTO] tRD Phase3 Adjustment..................: 0 [AUTO] Trd2rd(Different Rank).................: 8 [AUTO] Twr2wr(Different Rank).................: 8 [AUTO] Twr2rd(Different Rank).................: 7 [AUTO] Trd2wr(Same/Diff Rank).................: 9 [AUTO] Dimm1 Clock Skew Control...............: [AUTO] Dimm2 Clock Skew Control...............: [AUTO] DDR Write Training.....................: [AUTO] Channel B Static tRead Value.....................: 10 tRD Phase0 Adjustment..................: 0 [AUTO] tRD Phase1 Adjustment..................: 0 [AUTO] tRD Phase2 Adjustment .................: 0 [AUTO] tRD Phase3 Adjustment..................: 0 [AUTO] Trd2rd(Different Rank).................: 8 [AUTO] Twr2wr(Different Rank).................: 8 [AUTO] Twr2rd(Different Rank).................: 7 [AUTO] Trd2wr(Same/Diff Rank).................: 9 [AUTO] Dimm1 Clock Skew Control...............: [AUTO] Dimm2 Clock Skew Control...............: [AUTO] DDR Write Training.....................: [AUTO] Motherboard Voltage Control CPU Load-Line Calibration..................: [Disabled] CPU Vcore..............................: 1.250v CPU Termination........................: 1.240V CPU PLL................................: 1.570V CPU Reference..........................: 0.760V [AUTO] MCH/ICH MCH Core...............................: 1.240V MCH Reference..........................: 0.760v [AUTO] MCH/DRAM Ref...........................: 0.900V [AUTO] ICH I/O................................: 1.570V ICH Core...............................: 1.200V DRAM DRAM Voltage...........................: 1.9v DRAM Termination ......................: 0.900V [AUTO] Channel A Reference....................: 0.900V [AUTO] Channel B Reference ...................: 0.900V [AUTO] Advanced Settings Limit CPUID Max. to 3..................: [Disabled] No-Execute Memory Protect..............: [Enabled] CPU Enhanced Halt (C1E)................: [Disabled] C2/C2E State Support...................: [Disabled] x C4/C4E State Support.................: [Disabled] CPU Thermal Monitor 2(TM2) ............: [Disabled] CPU EIST Function......................: [Disabled] Virtualization Technology..............: [Disabled] Integrated Peripherals Legacy USB Storage Detect .............:[Enabled]

Quote:

Originally Posted by nugzo

Static tRead Value = PL level on these boards

thanks, i ran 545 for 8 hours blend, at 11 which was auto'd, set it to 9 on both dimms and its flying again in blend :up:

will run it tonight at pl 9, 1.26 nb and 1.22vtt

Quote:

Originally Posted by Jsunn

The following settings give me a BSOD before entering Windows:

I am using BIOS F7c
Now, if I just change the the FSB to 400 and manualy enter my RAM timings and keep everything else on auto. I can boot into Windows and am prime stable for 3 hours...?

What do you think?

There are so many variables.

I also tried the settings listed a page or so back and could not get it to POST.

Code:

MB Intelligent Tweaker(M.I.T.) Robust Graphics Booster ...............: FAST CPU Clock Ratio .......................: 9 Fine CPU Clock Ratio...................: 0.5 CPU Frequency .........................: 3.80GHz (400X9.5) Clock Chip Control Standard Clock Control CPU Host Clock Control.................: [Enabled] CPU Host Frequency (Mhz) ..............: 400 PCI Express Frequency (Mhz) ...........: 100 C.I.A.2 ...............................: [Disabled] Advanced Clock Control [Press Enter] CPU Clock Drive........................: 800mV PCI Express Clock Drive................: 900mV CPU Clock Skew (ps)....................: 0ps MCH Clock Skew (ps)....................: 0ps DRAM Performance Control Performance Enhance....................: [STANDARD] Extreme Memory Profile (X.M.P.)........: [Disabled] (G)MCH Frequency Latch.................: [AUTO] System Memory Multiplier ..............: 2.66D Memory Frequency (Mhz) ................: 1066 DRAM Timing Selectable ................: [Manual] Standard Timing Control CAS Latency Time.......................: 5 tRCD ..................................: 5 tRP'...................................: 5 tRAS...................................: 15 Advanced Timing Control tRRD...................................: 4 tWTR...................................: 4 tWR....................................: 5 tRFC...................................: 62 tRTP...................................: 4 Command Rate (CMD) ....................: 2 Driving Strength Profiles Driving Strength ......................: 1066 Channel A Static tRead Value.....................: 10 tRD Phase0 Adjustment..................: 0 [AUTO] tRD Phase1 Adjustment..................: 0 [AUTO] tRD Phase2 Adjustment .................: 0 [AUTO] tRD Phase3 Adjustment..................: 0 [AUTO] Trd2rd(Different Rank).................: 8 [AUTO] Twr2wr(Different Rank).................: 8 [AUTO] Twr2rd(Different Rank).................: 7 [AUTO] Trd2wr(Same/Diff Rank).................: 9 [AUTO] Dimm1 Clock Skew Control...............: [AUTO] Dimm2 Clock Skew Control...............: [AUTO] DDR Write Training.....................: [AUTO] Channel B Static tRead Value.....................: 10 tRD Phase0 Adjustment..................: 0 [AUTO] tRD Phase1 Adjustment..................: 0 [AUTO] tRD Phase2 Adjustment .................: 0 [AUTO] tRD Phase3 Adjustment..................: 0 [AUTO] Trd2rd(Different Rank).................: 8 [AUTO] Twr2wr(Different Rank).................: 8 [AUTO] Twr2rd(Different Rank).................: 7 [AUTO] Trd2wr(Same/Diff Rank).................: 9 [AUTO] Dimm1 Clock Skew Control...............: [AUTO] Dimm2 Clock Skew Control...............: [AUTO] DDR Write Training.....................: [AUTO] Motherboard Voltage Control CPU Load-Line Calibration..................: [Disabled] CPU Vcore..............................: 1.250v CPU Termination........................: 1.240V CPU PLL................................: 1.570V CPU Reference..........................: 0.760V [AUTO] MCH/ICH MCH Core...............................: 1.240V MCH Reference..........................: 0.760v [AUTO] MCH/DRAM Ref...........................: 0.900V [AUTO] ICH I/O................................: 1.570V ICH Core...............................: 1.200V DRAM DRAM Voltage...........................: 1.9v DRAM Termination ......................: 0.900V [AUTO] Channel A Reference....................: 0.900V [AUTO] Channel B Reference ...................: 0.900V [AUTO] Advanced Settings Limit CPUID Max. to 3..................: [Disabled] No-Execute Memory Protect..............: [Enabled] CPU Enhanced Halt (C1E)................: [Disabled] C2/C2E State Support...................: [Disabled] x C4/C4E State Support.................: [Disabled] CPU Thermal Monitor 2(TM2) ............: [Disabled] CPU EIST Function......................: [Disabled] Virtualization Technology..............: [Disabled] Integrated Peripherals Legacy USB Storage Detect .............:[Enabled]

you can try this and post back.

MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............: Auto <===
CPU Clock Ratio .......................: 9 <===
Fine CPU Clock Ratio...................: 0.0 <===
CPU Frequency .........................: 4.05 GHz (450X9)

Clock Chip Control
Standard Clock Control
CPU Host Clock Control.................: [Enabled]
CPU Host Frequency (Mhz) ..............: 450
PCI Express Frequency (Mhz) ...........: Auto <===
C.I.A.2 ...............................: [Disabled] <===

Advanced Clock Control [Press Enter]
CPU Clock Drive........................: 700mV <===
PCI Express Clock Drive................: 700mV <===
CPU Clock Skew (ps)....................: 0ps
MCH Clock Skew (ps)....................: 0ps

DRAM Performance Control
Performance Enhance....................: [Turbo] <===
Extreme Memory Profile (X.M.P.)........: [Auto] <===
(G)MCH Frequency Latch.................: [333MHz] <===
System Memory Multiplier ..............: 2.4B <===
Memory Frequency (Mhz) ................: 1080
DRAM Timing Selectable ................: [Manual] <===

Standard Timing Control
CAS Latency Time.......................: 5 <===
tRCD ..................................: 5 <===
tRP'...................................: 5 <===
tRAS...................................: 15 <===

Advanced Timing Control
tRRD...................................: 4 <===
tWTR...................................: 4 <===
tWR....................................: 12 <===
tRFC...................................: 68 <===
tRTP...................................: 4 <===
Command Rate (CMD) ....................: Auto <===

Driving Strength Profiles
Driving Strength ......................: Auto <===

Channel A
Static tRead Value.....................: 8 <=== or [AUTO]
tRD Phase0 Adjustment..................: [AUTO]
tRD Phase1 Adjustment..................: [AUTO]
tRD Phase2 Adjustment .................: [AUTO]
tRD Phase3 Adjustment..................: [AUTO]
Trd2rd(Different Rank).................: [AUTO]
Twr2wr(Different Rank).................: [AUTO]
Twr2rd(Different Rank).................: [AUTO]
Trd2wr(Same/Diff Rank).................: [AUTO]
Dimm1 Clock Skew Control...............: [AUTO]
Dimm2 Clock Skew Control...............: [AUTO]
DDR Write Training.....................: [Disable] <=== or [AUTO]

Channel B
Static tRead Value.....................: 8 <=== [AUTO]
tRD Phase0 Adjustment..................: 0 [AUTO]
tRD Phase1 Adjustment..................: 0 [AUTO]
tRD Phase2 Adjustment .................: 0 [AUTO]
tRD Phase3 Adjustment..................: 0 [AUTO]
Trd2rd(Different Rank).................: [AUTO]
Twr2wr(Different Rank).................: [AUTO]
Twr2rd(Different Rank).................: [AUTO]
Trd2wr(Same/Diff Rank).................: [AUTO]
Dimm1 Clock Skew Control...............: [AUTO]
Dimm2 Clock Skew Control...............: [AUTO]
DDR Write Training.....................: [Disable] <=== or [AUTO]

Motherboard Voltage Control
CPU
Load-Line Calibration..................: [Enable]
CPU Vcore..............................: 1.250v <===> 1.325v then try lowering this value down
CPU Termination........................: 1.26V <=== then try lowering this value down to 1.24, 1.22, 1.20
CPU PLL................................: 1.50V <===
CPU Reference..........................: [AUTO] <===

MCH/ICH
MCH Core...............................: 1.26V <=== then try lowering this value down to 1.24, 1.22.
MCH Reference..........................: 0.740v <===
MCH/DRAM Ref...........................: [AUTO] <===
ICH I/O................................: 1.500V <===
ICH Core...............................: 1.100V <===

DRAM
DRAM Voltage...........................: 1.9v <===
DRAM Termination ......................: [AUTO] <===
Channel A Reference....................: [AUTO] <===
Channel B Reference ...................: [AUTO] <===

open box

I have ordered a few motherboards 'open-box'. The only problem with openbox boards is sometimes you get an early revision of the boards. Does this board have any early revisions, and were they terrible? i'll only save $40 bux; but hey, $40 bux is $40 bux.Ive always had good luck; but I would hate to get a crappy overclocker or something like that.
I will be getting a q9650 to put on it. I would appreciate any feedback. Thanks

Quote:

Originally Posted by pangingIII

i supposed that's looking good.
but why you post that in here? lol.

Sorry, it is about a comparison between Maximus II Formula and UD3P.
Please read post #1337.

[]'s
Simps

Has anyone tried the UD3 with a 9800GX2? If so, please can they post up 3DM03 screenies with score breakdowns and clockspeeds?

Ideally around 4GHz 720/1100. I can interpolate the scores a bit if they're close to those levels.

Cheers!

@Simps

Yesterday I gave 500FSB a go, but I couldn't get it to load Windows :(

I'v run 515FSB before, so I don't know what setting I had wrong, but i'll give it another go in a few hours when I wake up.

I was just running Intel Burn test at 3.6GHz (400x9) and my NB temp was 65C, is that to high?

Thanks

About the 500FSB not booting, it is probably related to:

mem speed (lack of vdimm)
strap
vPLL
vFSB (vtt)
vNB

About 65C NB, yes I think it is hot. Try to add a fan to the NB heatsink. Don't let it run passive. What was your vNB for that?