clear bios and then try to start w/ one stick of memory.Quote:
Originally Posted by Elio
Printable View
clear bios and then try to start w/ one stick of memory.Quote:
Originally Posted by Elio
Well i RMA'ed my board...the bios went AWOL and the mobo was busted.
Edit :
So i got the new mobo back. same REV as the old one.
any way i got with Bios 906
is 1102 worth changing to?
Are there any differents 1013 and 1102 ? Which one is reach better fsb ?
1102 supports the E0 45nm. I needed it for my E0 E8500. As far as which clocks further - if you have an E0 you need to use this bios so it doesnt really matter. For my 65nm quad, 1102 clocks same as any other.Quote:
Originally Posted by vera
I tried the pencil mod, and I never seemed to get a result from it... I'm positive I penciled in the right one, I did it pretty dark after increasing the darkness a few times.
P5K-E WiFi is my favorite mobo, I'll never forget it :p::cool:
But the socket pins are s:banana::banana::banana::banana::banana:d, I don't know what happened :(:(:shrug:
http://i302.photobucket.com/albums/n...0_4395copy.jpg
This photo is not very good.. Now it's worse, much worse :(
:banana::banana::banana::banana: dude, that's mighty sucky!!!
No idea how it happened?
No idea man :shrug:
New photos :(
http://i302.photobucket.com/albums/n...C/100_5221.jpg
http://i302.photobucket.com/albums/n...C/100_5223.jpg
Did you do this?
No man:confused::(
Took the CPU out and it was like that? That's proper messed up! :(
Holy Snikies!!! Looks like the result of either etreme Heat, or 2 much strain in the center of the CPU socket, maybe from over tighting the cooling device?Quote:
Originally Posted by racergr
No no.. I put the mobo into the box, but I forgot to place the plastic cap (the one which is for security). I am an a:hump::hump:hole, I know :confused::(
:p:
I'll be getting this board hopefully this week; on it's way from Canada:) Nice to see a place to learn the ins and outs of it as I go!
Hello.
Does anyone now what could be the problem. I flashed my P5K-E with the 0602 bios and now the motherboard powers on, and that is all, the fans are spining, but no boot, i cant get into bios, nothing.
What can i do? It worked well until i flashed it with the 0602 bios, i did it becouse i hoped for a better OC, and now nothing.
any idea's?
Thanks.
Which CPU do you use?
E8500, do you thin that it dosen't support it?
Exactly :yepp:. You should find older CPU and use it to flash BIOS back to newer version.
you are right. I inserted in a Pentium 4 CPU and in works now. So i guess back to a newer version of bios. Thanks a lot, mate. :toast:
It turns out that with decent ram this P5K-E really shines. Currently Priming @ 485MHz FSB with my Quad and loving it.
Should be able to push for 500MHz+ for at least benching! Only thing over stock is MX2 on the Northbrige instead of the Asus goop.
Need at least 12xx bios for 45nm and for the absolute latest for the E0 45nm.
12xx bios? 1102 is the latest...Quote:
Originally Posted by dnottis
Hello many computer guru,
I am purchasing a 1.5TB HDD Seagate, and I am not sure if this mobo supports it. Does anyone know?
Also, this is OT, but I would set this additional drive as a slave? (compared to the 500GB i already have installed).
Thanks.
you're right, its 1102. 1102 is the only one that recognizes E0 wolfdales.Quote:
Originally Posted by EL RICHARDO
Well I got my board and am having trouble getting stable over 3.8. Does anyone have an e8400 that would be willing to share some stable settings they here? I know mileage vaires, but I'm still kinda new to OCing and would like some starting points.