ASUS P8P67 Pro/Evo/Deluxe OC discussion thread

A not 100% stable OC ?

Out of nowhere my board does the double boot again.Anyone else have that happen?

Quote:

---

Originally Posted by ChanceCoats123

1866 cas 9 = 1600 cas 8. Go with whichever you want. :)

---

Finally got 1600 8 8 8 24.

1600 8 8 8 24 is the same performance that 1866 9 10 9 28 ?

Quote:

---

Originally Posted by yenclas

Finally got 1600 8 8 8 24.

1600 8 8 8 24 is the same performance that 1866 9 10 9 28 ?

---

8 cycles @ 800MHz (the command clock is not doubled like the data rate) = 10ns
9 cycles @ 933Mhz = 9,65ns

So 1866 wins in both absolute latency and bandwidth. But better than teorizing is running some benchs yourself.

Quote:

---

Originally Posted by danielkza

8 cycles @ 800MHz (the command clock is not doubled like the data rate) = 10ns
9 cycles @ 933Mhz = 9,65ns

So 1866 wins in both absolute latency and bandwidth. But better than teorizing is running some benchs yourself.

---

Thank you very much, but I don't get stable 1866 9 10 9 28 2T

I test with 1,1 VCCIO and 1,5625 VDIMM and nothing helps. Prime cause bsod at seconds to begin.

(Sorry for my bad English)

Quote:

---

Originally Posted by yenclas

Thank you very much, but I don't get stable 1866 9 10 9 28 2T

I test with 1,1 VCCIO and 1,5625 VDIMM and nothing helps. Prime cause bsod at seconds to begin.

(Sorry for my bad English)

---

You'll probably need some more RAM voltage to get beyond 1600MHz. Everything up to 1.65V is most likely (do your research to be sure) fine for both memory and the IMC.

Quote:

---

Originally Posted by Leeghoofd

A not 100% stable OC ?

---

I can do 50 passes with LinX but fail in Blend test in Prime95

for me prime needs a little more vcore than linx

Quote:

---

Originally Posted by Sauron_Vie

for me prime needs a little more vcore than linx

---

LinX + AVX?
Got LinX stable for 5hours @4700, my 24/7 speeds

Quote:

---

Originally Posted by Bullu$

LinX + AVX?
Got LinX stable for 5hours @4700, my 24/7 speeds

---

no, still @vista 64bit :)

Have anyone tried the 1606 bios for P8P67 deluxe ? any impressions ?

Thanks ,

Anyone can share bios 1301 for WS revolution?

How is the new 1608 bios doing for people?

I've updated bios to 1606 and now pc hangs while windows logo comes up. Lights on keyboard and mouse flicker then go out. Forced to reboot and then the same again. Tried going back to an earlier bios but it's still the same? anyone any ideas?

Got it sorted. Got so bogged down today, at some stage did not power 2nd gfx card! Doh.. Seems okay now.. next to overclocking!!

guys anyone knows if Asus has ever stated if this mobo series will be able to work with the future IvyBridge?

AFAIK it just requires a BIOS update for support.

Quote:

---

Originally Posted by orion23

Thanks again everyone.

Downloaded CPU-Z 1.562 and it shows the speed @ 1.6ghz but when launching IE it changed to 4.5ghz briefly, so I guess that works. I then disabled Speed step in the bios and CPU-Z continues to report 1.6ghz and it jumps to 4.5 ghz when the PC is used.
Also, system properties with my Q6600 would show my CPU @ the overclocked speed of 3.6ghz...with this 2600K it does not.



Is there a way to have the PC run @ 4.5ghz 24/7?
My temperatures idle right now are 28 - 30 using an Ultra Extreme 120 single fan with the bolt thru KIT REV B.

---

Can u resolve this problem ? I have same problem with my new mobo ?

disable c1 c3 c6 and u will be happy ;)

Is there any way to roll back to a previous bios?

running 1202 (ws revolution)

New bios for the deluxe was just uploaded to the FTP : 1702 ,
could`nt find a changelog , it was yet to be updated in the site .

Anyone care to try ?

Quote:

---

Originally Posted by Bullu$

Is there any way to roll back to a previous bios?

running 1202 (ws revolution)

---

I downgraded sucessfully from 1502 to 1305 by using AMI's utility:

http://hardforum.com/showpost.php?p=...postcount=2343

Quote:

---

Originally Posted by dany74q

New bios for the deluxe was just uploaded to the FTP : 1702 ,
could`nt find a changelog , it was yet to be updated in the site .

Anyone care to try ?

---

Yep, working so far , so good...no problems @all here;)

http://img88.imageshack.us/img88/724...newbios.th.jpg
http://img861.imageshack.us/img861/2...nch5007.th.jpg
http://img88.imageshack.us/img88/724...newbios.th.jpg

Quote:

---

Originally Posted by danielkza

I downgraded sucessfully from 1502 to 1305 by using AMI's utility:

http://hardforum.com/showpost.php?p=...postcount=2343

---

Thanks, will try that out :up:

edit;
Got it done :), running 1103 again

Hello.

you guys squeak coil power processor? at high voltage in the order of 1.45v is this phenomenon?

particular model, I mean pro p8p67 rev.3

thanks in advance