Printable View
I flashed my Powercolor 3850 512MB with the sapphire bios from "the-strokes" but my voltage remains the same (1.28v 3D) :( the BIOS does nothing but creat an 2D profile with 297Mhz core and 1.24v. With the stock bios, the card runs constantly at 720MHz and 1.28v for both 2D and 3D.
i just flashed to the bios from the-strokes.Quote:
Originally Posted by eva2000
i had to installed the drivers again, meh...
well for once, the original bios i used had much higher 2d volts and it had the same clocks in 2d as in 3d.
same as on the powercolor card from ken. it seems powercolor and club3d cards are the same, except for some powercolor cards using quimonda mem... well maybe some club3d cards also use quimonda?
here is how i meassured vgpu:
http://www.abload.de/thumb/vgpuerf.jpg
with the attached sapphire 512mb bios i get:
IDLE:
with the first one i get 1.251v
with the second one i get 1.280v
with the third one i get 1.252v
LOAD:
with the first one i get 1.298v
with the second one i get 1.323v
with the third one i get 1.298v
with my original bios i had 1.33v/1.40v vgpu under load!
so much better than this.
here ken, try this bios, im sure itll give you a little gpu boost since it has higher vgpu :)
thanks for uploading saaya but your bios completely messed up my card, got corrupted screen after flashing so I had to do a blind flash :p:Quote:
Originally Posted by saaya
I think its the difference in ram parameters that caused the problem since your Clud3D uses samsung and my powercolor uses quimonda :(
Dam, wish that worked, I want that extra vgpu! Well maybe Ill just hardmod..
check out the techpowerup vga bios database, there are a few 3850 512mb bioses with different voltages :)
the weird thing is... i am stuck at the same gpu clocks with this bios with lower vpgu as with my original bios with higher vgpu! 0_o
so does my gpu suck THAT bad? :D
I couldnt wait so I decided to mod the bios myself as below:
http://img57.imageshack.us/img57/3831/kmodox6.png
I now have separate 2D(300MHz) and 3D(720MHz) clock but the voltage still remains at 1.28V in 3D :(
did you check the voltage values in my bios?
maybe you can copy paste them into your bios? :D
I checked up your BIOS and found this patternQuote:
Originally Posted by saaya
http://img227.imageshack.us/img227/4507/sayaaal7.png
the core and mem clock seems to follow the findings of "Janchu88" here: http://www.xtremesystems.org/forums/...d.php?t=167966
(40 19 01 = 72000 = 720MHz ; 90 5F 01 = 90000 = 900MHz )
but the voltages are just weird :p
CE 03 = 974 = 0.974v
FC 03 = 1020 = 1.020v
C4 04 = 1220 = 1.220v
so I have no clue how you got over 1.3v when measured :confused: from table it seems your 3D voltage is only 1.220v, maybe thats why you cant go over 760? :p:
in my modded BIOS, i have 2F 05 = 1327 = 1.327v but it only gives me 1.28v in 3D for some reasons:(
i used the same value (2F 05) in my sapphire bios and it's also giving me 1.274vQuote:
Originally Posted by ken
weird... can you mod my bios to 1.327v and post it here?
id like to try it and see if i get higher vgpu readings.
im starting to think the vgpu reading spot is wrong... or maybe it only works properly on the reference design? or maybe the card layout adds a certain voltage to the voltage programmed in bios?
i meassured the smd caps on the back of the gpu and im reading roughly the same voltage as at the vgpu reading spots...
I use the same spot to measure the vcore and it reads 1.28v with all the bios Ive tried.Quote:
Originally Posted by saaya
btw, here your modded bios, I only changed the 3D voltage (to 1.327v - 2F 05) and the clock of the first set to match with your current clock. Please dont blame me if anything happen to your card because Im new at this as well :p:
hex compare of your stock and modded bios
http://img149.imageshack.us/img149/7493/saayaiw3.png
Saaya did you try this mod yet?
Ken did you try it?
Ive tried every possible way but none has worked so far :( voltage stucks at 1.28v for 3D. Maybe hardmod is the way to go :p:Quote:
Originally Posted by MsB
I just need a bios that will allow it to oc past 760/1850 and I will use the pencil mod. I tried it on one of my cards and with riva got it easly to 800/1800 but Im stuck at 760 with CF
MsB, tried my stock HIS HD3850 IceQ 3 Turbo bios stock is 715/909 and out of the box i am running 2x of these in CF a 783/1100
Bios http://fileshosts.com/videocards/HIS...iceq3_bios.rar
i guy sorry for my bad english,i'm a frogman
i have a problem i have testing x bios and zero good
atiflsh=error 0fl01 and atiwinflash error subsystemID for all bios:confused:
fairdell hexcmp is hard for me:(
one pro for look my bios and mod for clok the vlt for over 800/1000 please?
it's possible? thanks you very much!!:up:
sapphire HD3850 512
http://www.fileshost.com/en/file/233...k3850-rar.html
hey chabalou,
Welcome to XtremeSystems :toast:
frogman? you mean your french? heheheh dont be so hard on yourself! :D
Im going to try the modded bios now, thanks a lot ken! :toast:
tanks saaya for your "accueille" :D
yes i'm french,no kick my ass,no kick my ass please!! :slapass:
i looooove the queeeeen...or...not :D joke
happy christmas thanksgiving and co all :toast:
oh guys, you're starting to play hard I see....i can't understand a number or a letter in that bios.....:D:D
0FL01 Error programming ROM (from atiflash troubleshooting guide)Quote:
Originally Posted by chabalou
----------------------------
- Check that the command line arguments you passed are correct.
- Check that the BIOS image file specified exists and isn't corrupted.
- Check that the ROM isn't write protected.
- If a parameter in the BIOS image file differs from a parameter in the
current ROM image (e.g. SSID), and you're sure you want to program
the image, specify the -f (force) flag on the command line.
did you use the " -f " when flash to force flash? I got the same error when I didnt use it. There is modded Sapphire BIOS in saaya's few posts back you can try :)
p/s: I can have a look at your BIOS and see what I can do but I cant download your file, where to click to download on that filehost site?
@saaya: how the modded BIOS? I hope everything is still working :p:
hi ken thx for look my problem:)
atiflash -f -p 0 newbios is not good..
atiflash -f -p 0 newbios -f not good
yes i testing bios saaya's but not good (sapphire,his,club3d)
There is not a single good for my card :rolleyes:
look for DL my bios
http://img144.imageshack.us/img144/6...ilesic9.th.png
Did you try this one?
hiQuote:
Originally Posted by chabalou
I just downloaded your bios and compared it with the "sapphire3850_124v_133v.zip" and they are identical apart from the voltages
http://img236.imageshack.us/img236/8817/compareqy4.png
so if it doesnt work for you then nothing we can do atm, have to wait for a new solution or do the hardmod
ok ken tanks for your reponse!!
i have test hexcmp huhu^^
go tutorial :D but hard^^
http://img183.imageshack.us/img183/1...rrores9.th.pngQuote:
they are identical apart from the voltages
i not understand /cry