ASUS P5K Deluxe - Intel P35 Bearlake + E6600 B1 / Q6600 B3

Printable View

Show 100 post(s) from this thread on one page

08-23-2007, 10:04 AM
`danny

Quote:

Originally Posted by Supershanks

something like this is a good idea to try & even out the core temps on wc rgs.. Thermalright LGA775 Bolt-Thru-Kit reduces mobo warping across cpu area so that at least all cores are level & flush with heatsink.
Have seen many get more even temps by tweaking the tightness of their nuts:lol:

I guess my nuts on my hsf are pretty tight then lol
08-23-2007, 01:49 PM
monza1412

First, I would like to say thanks to Eva and all the gurus here for this complete thread. It has help me a lot.
But here is the reason of this post:
I was testing my beloved L629B when I come to this strange (at least for me) behavior on this motherboard.

Fsb at 413 x 9 I got 3717
Fsb at 414 x 9 I got 3312 :confused:
Fsb at 415 x 9 I got 3735

tested twice, fsb set in bios. For some reason at 414, the multi switchs to 8 by itself.
I need some feedback on this, Is anyone else getting this issue? Is this some kind of strap thing or something related?
Bios is 311, I have all the options at the cpu menu at disabled, only PECI is enabled.

I had a similar thing with a P5WDH.. at 414 and 416 it booted ok, but at 415 was a no go.
08-24-2007, 01:11 AM
Supershanks

Quote:

it has something to do with the tighness or the thermal grease

It's nothing to do with the tightness of the thermal grease, more the fact that it ensures that the board isn't warped, so that the whole of the CPU ICH is flush with the cooling block, not just a corner of it.

A bolt thru kit can have as much impoact as lapping, but fixes different raft of issues.

Quote:

`danny
I guess my nuts on my hsf are pretty tight then

Very likely:D
08-24-2007, 01:24 AM
chessman

Quote:

Originally Posted by monza1412

First, I would like to say thanks to Eva and all the gurus here for this complete thread. It has help me a lot.
But here is the reason of this post:
I was testing my beloved L629B when I come to this strange (at least for me) behavior on this motherboard.
Fsb at 413 x 9 I got 3717
Fsb at 414 x 9 I got 3312 :confused:
Fsb at 415 x 9 I got 3735
tested twice, fsb set in bios. For some reason at 414, the multi switchs to 8 by itself.

I need some feedback on this, Is anyone else getting this issue? Is this some kind of strap thing or something related?
Bios is 311, I have all the options at the cpu menu at disabled, only PECI is enabled.
I had a similar thing with a P5WDH.. at 414 and 416 it booted ok, but at 415 was a no go.

You are right monza1412 !

The same here :
Fsb at 413 x 9, I got 3717 with np
Fsb at 414 x 9, I got 3312 (9 x 368) !!!!
Fsb at 415 x 9, I got 3735 with np

Also at (414 x 9) = 3312 (9 x 368) with static read control enabled : not boot !
These trials with bios 311, later I will try with 501.

Very strange issue ! :confused:

Edit : exactly the same with 501 bios [at 414 x 9, I got 3312 (9 x 368)]
08-24-2007, 04:38 AM
bloodbanger

Is there a way to change the Fsb speed to 1333 on a Asus P5K Deluxe,when using a Q6600??
08-24-2007, 04:53 AM
chessman

Quote:

Originally Posted by bloodbanger

Is there a way to change the Fsb speed to 1333 on a Asus P5K Deluxe,when using a Q6600??

Have a look... ;)
08-24-2007, 10:50 AM
monza1412

Quote:

Originally Posted by chessman

You are right monza1412 !

The same here :
Fsb at 413 x 9, I got 3717 with np
Fsb at 414 x 9, I got 3312 (9 x 368) !!!!
Fsb at 415 x 9, I got 3735 with np

Also at (414 x 9) = 3312 (9 x 368) with static read control enabled : not boot !
These trials with bios 311, later I will try with 501.

Very strange issue ! :confused:

Edit : exactly the same with 501 bios [at 414 x 9, I got 3312 (9 x 368)]

yes, its a strange issue, maybe someone will come with a logic explanation.
Anyway, using only 414 of fsb its a shame in this motherboard :D
08-26-2007, 10:46 AM
Tommy L

What is this enable\disable ME on p5k deluxe board? it is missing the jumper pins. but it can be manipulated with conductive paint i belive. but what is it ?

it is placed above blue pci-e 16x port and end of DELUXE name.
08-26-2007, 03:20 PM
rbsmontemor

Quote:

Originally Posted by Tommy L

What is this enable\disable ME on p5k deluxe board? it is missing the jumper pins. but it can be manipulated with conductive paint i belive. but what is it ?

it is placed above blue pci-e 16x port and end of DELUXE name.

I'm curious about that too :confused:

Rbs.
08-26-2007, 09:08 PM
M Diddy

Quote:

Originally Posted by Pokerjo

i have been having a problem with opening control panel in vista when my rig is over clocked :shakes:

P5K, e6750@3600

When i try to open it it just flashes up and then goes in a second, i know others have had this prob but unless i missed somethng no one has found the answer, well if you type (control ncpa.cpl users) into CMD it will open up netwok connections in control panel and you can then select anything in contorl panel you like, not ideal but the best work around i have found.

hope this help someone as this has been @*#xing me right off :)

Actually, it's not stability.... I'm having the same issue as well. Have a look see here though! ;)

http://support.microsoft.com/kb/936686/en-us
08-27-2007, 01:32 PM
jagt

Is raid 0 working properly on this board? Any other issues I should know about before buying one?
08-27-2007, 02:34 PM
monza1412

Quote:

Originally Posted by jagt

Is raid 0 working properly on this board? Any other issues I should know about before buying one?

running vista64 in raid 0 (2 Seagate SATA1 drives), no problems so far. But some people had BSOD setting raids with this motherboard, I guess their were defective motherboards.
08-27-2007, 02:38 PM
CERO

Those peeps with SATA II, were having probs if I am correct.

*edit sorry I thought it was pointing the premium, so far I didnt experienced any SATA( raid) probs really on the deluxe
08-27-2007, 02:42 PM
DualCore

i have one of this mobo, but i'm using a e6850, overclock nice with stoc vcore, but my temps are too slows, anyone have a problem like this ? :s
08-27-2007, 02:44 PM
CERO

Quote:

Originally Posted by DualCore

i have one of this mobo, but i'm using a e6850, overclock nice with stoc vcore, but my temps are too slows, anyone have a problem like this ? :s

what u mean by your temps are too slow?
08-27-2007, 02:49 PM
DualCore

look this, it's a fresh instalation of vista, i try too in xp 'n have the same temps :confused:

http://img367.imageshack.us/img367/7...idlerv3.th.jpg

this is on xp @ 3.6

http://img521.imageshack.us/img521/7...0a36xt4.th.jpg
08-27-2007, 02:54 PM
crossg

Quote:

Originally Posted by DualCore

look this, it's a fresh instalation of vista, i try too in xp 'n have the same temps :confused:

http://img367.imageshack.us/img367/7...idlerv3.th.jpg

this is on xp @ 3.6

http://img521.imageshack.us/img521/7...0a36xt4.th.jpg

You need to down load the latest core temp Beta 0.95.4 or add 15 deg to your current core temp. See here. Downlaod core temp 0.95.4 Or here I think the link is broken though.:(
08-27-2007, 02:56 PM
Severance

Quote:

Originally Posted by DualCore

look this, it's a fresh instalation of vista, i try too in xp 'n have the same temps :confused:

http://img367.imageshack.us/img367/7...idlerv3.th.jpg

this is on xp @ 3.6

http://img521.imageshack.us/img521/7...0a36xt4.th.jpg

I had the same problem with E6850. Use AI Siute for temps It seems to be correct.
08-27-2007, 03:03 PM
monza1412

I was bored today and I did some spi runs just to see the DRAM Static Read Control / Transaction Booster options influence in memset and in the superpi score. All test were done with 5.5.5.15 timings at 1:1 (the others sub-timings at AUTO - Command Rate at 2T - bios 311).

first run: DRAM Static Read Control DISABLED / Transaction Booster DISABLED (Relax0)

http://www.subirimagenes.com/imagene...00disabled.JPG

second run: DRAM Static Read Control DISABLED / Transaction Booster ENABLED (Boost level 1)

http://www.subirimagenes.com/imagene...00 trans 1.JPG

At boost level 0, the performance level went to 11

third run: DRAM Static Read Control ENABLED / Transaction Booster DISABLED (Relax0)
* leaving DRAM Static Read Control AUTO / Transaction Booster AUTO gave the same results

http://www.subirimagenes.com/imagene...073800auto.JPG

Also changing the relax options shows changes in the performance level in memset, the others subtimings remains the same

Relax 0 - Performance level 8
Relax 1 - Performance level 9
Relax 2 - Performance level 10
Relax 3 - Performance level 11

So, as it has been said before, the Dram Static Read Control option has more influence in performance/bandwith gains than the transaction booster option.
08-27-2007, 03:04 PM
DualCore

ok tnks Crossg i try this version, but this link are broke, i try to download later, and tnks Severance i go to install AI Suite now...... :up:
08-28-2007, 12:38 AM
chessman

Quote:

Originally Posted by monza1412

I was bored today and I did some spi runs just to see the DRAM Static Read Control / Transaction Booster options influence in memset and in the superpi score. All test were done with 5.5.5.15 timings at 1:1 (the others sub-timings at AUTO - Command Rate at 2T - bios 311).
Also changing the relax options shows changes in the performance level in memset, the others subtimings remains the same
Relax 0 - Performance level 8
Relax 1 - Performance level 9
Relax 2 - Performance level 10
Relax 3 - Performance level 11
So, as it has been said before, the Dram Static Read Control option has more influence in performance/bandwith gains than the transaction booster option.

I also made this
08-28-2007, 05:44 AM
monza1412

Quote:

Originally Posted by chessman

I also made this

nice work chessman :up: . I was shocked with the vdrop in this board, from 1.3 in bios to 1.208 load. The voltage damper option should come enabled by default and not at auto that its the same as disabled.
But I really dont have any serious complain about this mobo, it has all that I didnt find in my P5WDH.
08-28-2007, 11:30 PM
chessman

Quote:

Originally Posted by monza1412

nice work chessman :up: . I was shocked with the vdrop in this board, from 1.3 in bios to 1.208 load. The voltage damper option should come enabled by default and not at auto that its the same as disabled. But I really dont have any serious complain about this mobo, it has all that I didnt find in my P5WDH.

Thanks ! You are right about the board.
I 'm wondering about #1208 Tommy's L post...
08-29-2007, 07:18 AM
Pokerjo

Quote:

Originally Posted by M Diddy

Actually, it's not stability.... I'm having the same issue as well. Have a look see here though! ;)

http://support.microsoft.com/kb/936686/en-us

Thanks M Diddy :up: i didnt think it was a stability issue, i have installed the hotfix and all seems well

Top man
08-29-2007, 09:51 AM
hornet

Quote:

Originally Posted by Pokerjo

Thanks M Diddy :up: i didnt think it was a stability issue, i have installed the hotfix and all seems well

Top man

Where is the hotfix for download??

Do not I find link.

Show 100 post(s) from this thread on one page