Water Cooled Case Gallery

Printable View

Show 100 post(s) from this thread on one page

08-07-2007, 12:28 PM
SaII

Quote:

Originally Posted by The Nemesis

http://i203.photobucket.com/albums/a..._000300011.jpg

http://i203.photobucket.com/albums/a..._000500031.jpg

Q6600 G0
DFI 680iLT
2 X BFG 8800TX SLI
OCZ DDR2 PC2-8000 Titanium Alpha VX2
Creative Sound Blaster Live Platnium
OCZ ProXStream 1000w
Tagan /\ Plus Black Pearl
Apogee GT, MCW30, MCP355 w/Petra'sTech DDCT-01s Top,
Thermochill PA120.2

was the picture taken at quake con or something? :D
08-07-2007, 01:18 PM
Ad1tya

That tube next to the Fan, over the CPU, looks like its badly kinked :O.
08-07-2007, 01:53 PM
trouble2000

Quote:

Originally Posted by Waterlogged

The flow may look OK with the small round interior of the res but I wouldn't be the least bit surprised if it was under 200 LPH. I sure hope that's a 18W pump, otherwise, your probably under 150 LPH.

The AGB res has been shown to hurt flow as shown in this topic here. The BI GTS is also known to hurt flow, mixed with 2 other rads (which are basically 4 90° elbows with thin tubing between them) as well as the blocks and you have a low flow/low pressure system. I recommend you add another pump of the same wattage and remove the AGB and add a Swiftech micro res (<-preferred recommendation) or lose at least one of the rads (preferably the GTS) and shorten the loop a little.

IMO, the best setup would be a single rad using either a TC PA120.3 or a Swifty MCR320 up top, but I'm not suggesting either of those because I know LL's aren't cheap and I'd hate to see it cut up any further, as it may look fugly if you do.

Thanks for all the information!:up:
08-07-2007, 02:55 PM
Leadslinger

Quote:

Originally Posted by funkflix

Thx! :)

It is a Chieftec Mesh Big Tower, which i varnished with black paint.

Thx!

I like the free room in the case, because i work a lot on my system! And sometimes i get called Mr. External.. :p: It is my passion to make the radiators external.

Me too! :D

Thx for the warning, but as stormshadow already said, it is reflection.

http://www.gravedigga.de/gravedigga/PC1/5.jpg

Thx!

Tubing is close to perfect imho, tried a lot of variations. :)

Yes, they are from www.mips-computer.de.

Thx! :)

Northbridge --> MIPS Freezer

Southbridge --> MIPS Freezer

CPU --> Alphacool NexXxos XP

GFX --> D-Tek FuZion GFX

Mosfet --> Heattrap

:toast:

http://www.gravedigga.de/gravedigga/PC1/6.jpg

Hey funkflix, nice work man! what fittings are those and is that 10mm tubing?
08-07-2007, 04:19 PM
The Nemesis

Quote:

Originally Posted by SaII

was the picture taken at quake con or something? :D

Yes:) Pic was taken by Benson from Tagan.

@Ad1tya

That kink was temporary to hold the fan over the PWM area. They were heating pretty bad from overclocking. Cpu temp never went over 36'c even overclocked.
08-07-2007, 06:29 PM
1badhabit

Quote:

Originally Posted by Ad1tya

That tube next to the Fan, over the CPU, looks like its badly kinked :O.

I think so too, might want to take a closer look at that....:shrug:
08-07-2007, 07:57 PM
ikeenen

Quote:

Originally Posted by Steffen

New Case. Still there has to be done a lot. Waiting for an order from my modding dealer ;)

http://www.abload.de/img/neues_gehuseteil2ckb.jpg

http://www.abload.de/img/img_20654nx.jpg

where did you stash the h/d's with that monster taking up all that room in the bottom?
08-07-2007, 07:59 PM
after

oke
08-07-2007, 08:06 PM
funkflix

Quote:

Originally Posted by Leadslinger

Hey funkflix, nice work man! what fittings are those and is that 10mm tubing?

Thanks! Tubing is Tygon 11/8mm and fittings are 1/4" 11/8mm.
08-08-2007, 10:07 AM
Fr4nk

Here's my new loop, cooling my 3800 X2 @ 2.8ghz and 8800 GTS:

http://img167.imageshack.us/img167/8...7072031fo8.jpg

http://img254.imageshack.us/img254/3...7072030vr2.jpg

http://img361.imageshack.us/img361/1...7072027ep0.jpg

EK 8800 and a DTEK Fuzion and a D5 :D

-Fr4nk
08-08-2007, 02:02 PM
sick_g4m3r

wow frank thats sick!
08-08-2007, 02:26 PM
deepsilver

Quote:

Originally Posted by Fr4nk

Here's my new loop, cooling my 3800 X2 @ 2.8ghz and 8800 GTS:

http://img167.imageshack.us/img167/8...7072031fo8.jpg

http://img254.imageshack.us/img254/3...7072030vr2.jpg

http://img361.imageshack.us/img361/1...7072027ep0.jpg

EK 8800 and a DTEK Fuzion and a D5 :D

-Fr4nk

i love that watercolor and the big tubes, they are awesome. :up:
08-08-2007, 02:41 PM
Ssilencer

Awesome setup Fr4nk
What are you using for the red color?
08-08-2007, 04:24 PM
mjassbong

I guess it's time for me to hang up my rig in the gallery. Some of you may have already seen it here:

http://www.xtremesystems.org/forums/...d.php?t=151109

Here are 3 main pics for your viewing pleasure. You can see alot more of it at the above link.

http://i211.photobucket.com/albums/b...3_IMG_1462.jpg

http://i211.photobucket.com/albums/b...1_IMG_1418.jpg

http://i211.photobucket.com/albums/b...1_IMG_1493.jpg
08-08-2007, 08:02 PM
A101Sugar

some nice watercooled rigs in here :)
08-09-2007, 02:46 AM
Concept 5000-FX

three loops ? That's Awsome !
08-09-2007, 03:33 AM
kinghong1970

even my wife was in awe...
08-09-2007, 08:28 AM
DarthBeavis

Quote:

Originally Posted by mjassbong

I guess it's time for me to hang up my rig in the gallery. Some of you may have already seen it here:

http://www.xtremesystems.org/forums/...d.php?t=151109

Here are 3 main pics for your viewing pleasure. You can see alot more of it at the above link.

http://i211.photobucket.com/albums/b...3_IMG_1462.jpg

http://i211.photobucket.com/albums/b...1_IMG_1418.jpg

http://i211.photobucket.com/albums/b...1_IMG_1493.jpg

If only you had one of these bud: http://img461.imageshack.us/img461/7...2187ip3.th.jpg

Perfect to multiloop . . .it is a TribalEvolution res

But, lemme say, i LOVE ur rig. Love love love love love.
08-09-2007, 08:35 AM
Rob_B

2 Attachment(s)

Here is my first try at watercooling.
I wanted it to all fitt inside the case and started with a to small radiator.
Now I switched to a PA120.2 and had to lift the case a bit. Still need to make some feet or wheels for it.
The next project will be building my own case.
I like the MM cases I see here, but they are just to big to have on my desk.
08-09-2007, 10:23 AM
Grinch

Quote:

Originally Posted by Rob_B

Here is my first try at watercooling.
I wanted it to all fitt inside the case and started with a to small radiator.
Now I switched to a PA120.2 and had to lift the case a bit. Still need to make some feet or wheels for it.
The next project will be building my own case.
I like the MM cases I see here, but they are just to big to have on my desk.

excellent 1st try.....awesome!:clap: :up: :)
08-09-2007, 10:41 AM
Patriote

Very clean build Rob_B! I like it!
08-09-2007, 12:45 PM
The_Beast

looks really clean Rob_B
08-09-2007, 07:59 PM
rdmty

Old loop:
http://farm2.static.flickr.com/1025/...fb0e9b12_b.jpg
http://farm2.static.flickr.com/1205/...3dab42f5_b.jpg

New loop:
http://farm2.static.flickr.com/1169/...094b03cc_o.jpg
http://farm2.static.flickr.com/1392/...f3ed61e0_o.jpg

Anyone know why this camera is so f'ing grainy? It's supposed to be 7megapixel.

That fan extension shouldn't be there, but my fan power slot isn't working in the rear :/
08-09-2007, 08:52 PM
Sparky

For the dark shot it is cranking the ISO speed way up which allows more light in for a faster shutter (less blur) but makes it grainy. What camera is it? If you can set the camera on something steady so it won't shake and manually drop the ISO down to 100 or 200 it would be much cleaner looking.
08-09-2007, 09:07 PM
rdmty

Quote:

Originally Posted by SparkyJJO

For the dark shot it is cranking the ISO speed way up which allows more light in for a faster shutter (less blur) but makes it grainy. What camera is it? If you can set the camera on something steady so it won't shake and manually drop the ISO down to 100 or 200 it would be much cleaner looking.

it's a casio exilim
08-10-2007, 11:46 AM
Typhon

5 Attachment(s)

MM UFO white powdercoat

Hi Everyone!

It was time to transfer the guts out of my P180b and stuff them into a Mountain Mod UFO. I had a tough time choosing between the black and the white powdercoat. This case was very easy to work with, I only had to drill holes to mount the pump and reservoir. The blue acrylic 3.5 -> 5.25 adapter had to be filed to get the USB port to fit. Thanks to the guys at Mountain Mods, Petra's and Crazy PC for their awesome customer service. What's next? Maybe a quadcore? A second loop? Hmmmm....

Let's get on with the pics:
08-10-2007, 12:13 PM
Patriote

W00t! Me like Typhon! Yet one more awesome U2-UFO :)
08-10-2007, 03:35 PM
Typhon

Thanks Patriote! I got the blade style fan guard idea from your MM build.
08-10-2007, 03:50 PM
Patriote

Quote:

Originally Posted by Typhon

Thanks Patriote! I got the blade style fan guard idea from your MM build.

Oh yeah ? Thats cool. :)
08-11-2007, 12:36 AM
Rob_B

Quote:

Originally Posted by Typhon

Hi Everyone!

It was time to transfer the guts out of my P180b and stuff them into a Mountain Mod UFO. I had a tough time choosing between the black and the white powdercoat. This case was very easy to work with, I only had to drill holes to mount the pump and reservoir. The blue acrylic 3.5 -> 5.25 adapter had to be filed to get the USB port to fit. Thanks to the guys at Mountain Mods, Petra's and Crazy PC for their awesome customer service. What's next? Maybe a quadcore? A second loop? Hmmmm....

I love that case in white.:up:

The only thing I noticed was the top fan grill.
You should rotate it 180deg, so it sits the same as the bottom 2.
08-11-2007, 01:24 AM
djstudio

Amateur Watercooling PC DJSTUDIO – Beta Version 0.85a
Foto – Panasonic Lumix DMC-LZ7EG-K Black 7.2 Mpx

CPU Blocks Swiftech Apogee GT Extréme
Pumpa Swiftech MCP655 12v DC Pump
VGA Blocks Swiftech MCW60-R
Black ICE-Xtreme III 360 mm
Black ICE-Xtreme II 240 mm
5x Noctua FAN 120mm NF-S12-1200
Cape Coolplex Plexi 25
Tygon R3603 7/16in. ID 5/8in. OD Laboratory Tubing

Hardware:
CPU: E6600@3645MHz - 9x405
MB: ASUS P5W DH-DELUXE
RAM: 2x1GB CORSAIR DDR2 800 CL4-4-4-10 Dual ch.
GPU: GIGABYTE 8800GTX @ 675/2090 Watercooled MCW60 + Ram Heatsing
HDD: WDC 74GB Raptor 16MB Cache
CASE:Yeong Yang Case BigTower 1271

http://members.chello.cz/dj_studio/p...r/P1010011.jpg

http://members.chello.cz/dj_studio/p...r/P1010014.jpg

http://members.chello.cz/dj_studio/p...r/P1010021.jpg

http://members.chello.cz/dj_studio/p...r/P1010037.jpg

ALL Foto Download 36 pictures:
http://www.djstudio.host.sk/dj.zip
08-11-2007, 06:21 AM
PilatuS

This week i upgraded my WC system with a full motherboard set from MIPS. Took me about 4 hours to rebuild the system. I really like the end result.

http://img171.imagevenue.com/loc849/..._122_849lo.jpg http://img179.imagevenue.com/loc71/t...9_122_71lo.jpg http://img40.imagevenue.com/loc692/t..._122_692lo.jpg http://img46.imagevenue.com/loc1040/...122_1040lo.jpg
08-11-2007, 07:12 AM
Typhon

Quote:

Originally Posted by Rob_B

I love that case in white.:up:

The only thing I noticed was the top fan grill.
You should rotate it 180deg, so it sits the same as the bottom 2.

Good catch Rob_B. Will do.

Thanks!

Typhon
08-11-2007, 07:34 AM
Aldy402

@typhon

im really diggin the gloss white
08-11-2007, 08:37 AM
[XC] Synthetickiller

Quote:

Originally Posted by Fr4nk

Here's my new loop, cooling my 3800 X2 @ 2.8ghz and 8800 GTS:

http://img167.imageshack.us/img167/8...7072031fo8.jpg

http://img254.imageshack.us/img254/3...7072030vr2.jpg

http://img361.imageshack.us/img361/1...7072027ep0.jpg

EK 8800 and a DTEK Fuzion and a D5 :D

-Fr4nk

So, did anyone ever establish what this blood red colored dye is? I WANT SOME!:up:
08-11-2007, 09:24 AM
Rob_B

Quote:

Originally Posted by Synthetickiller

So, did anyone ever establish what this blood red colored dye is? I WANT SOME!:up:

I don't know what he used.
But I can get it like that in my loop when I add more food coloring.
See my pc in the first post on this page.
08-11-2007, 01:13 PM
sbinh

Red tubing perhaps ....
Like this :Red Tube
08-11-2007, 01:28 PM
Garrett

djstudio what kind of ramsinks are those?
I've never seen them...
08-11-2007, 01:34 PM
Waterlogged

Quote:

Originally Posted by sbinh

Red tubing perhaps ....
Like this :Red Tube

Nope, you can see the fittings clearly.

It's blood red coolant or dye, easily found in almost any online shop.

Garret, they look like Tt's to me.
08-11-2007, 01:40 PM
Rob_B

@Typhon. Now it is looking even better.:up:
08-11-2007, 05:59 PM
pvtdonuts

http://i104.photobucket.com/albums/m...505/photo2.jpg
http://i104.photobucket.com/albums/m...t505/photo.jpg
Sorry for the bad quality, they were taken with my phone. After seeing Lasse.J's build, it compelled me to sell my 2 8800GTS's and the p5n320e sli and get rid of the stacker t01 and get a p182, p5k deluxe, and a 8800GTX. BTW I still need to paint the interior of the side panels.
08-11-2007, 06:19 PM
YugenM

Nice loop, Pilatus :)
08-11-2007, 09:23 PM
ItAm

Well, after many hours of research, a fair bit of cash, and a lot of time spent, this is what I've come up with...

(The pictures that were taken in the dark came out blurry, and I didn't want to pull it out again tonight to take new pictures... I dislike this camera.)

Case without side panel on (fear my lack of cable management skills):
http://74.86.106.128/~madskill/madskillz/sIMG_7174.jpg
http://74.86.106.128/~madskill/madskillz/sIMG_7152.jpg
http://74.86.106.128/~madskill/madskillz/sIMG_7160.jpg

Case without side panel on, in the dark (with blurry goodness):
http://74.86.106.128/~madskill/madskillz/sIMG_7170.jpg

Case with side panel on:
http://74.86.106.128/~madskill/madskillz/sIMG_7198.jpg

Case with side panel on, in the dark (blurry again):
http://74.86.106.128/~madskill/madskillz/sIMG_7196.jpg

I'm probably going to replace the rad grill, and get at least a few new PSU cables so that I can conceal everything better and have less clutter.
08-11-2007, 09:53 PM
Ad1tya

More pics??^^

wheres the Rad? Lol... On the top?
08-11-2007, 11:29 PM
Mad_Man

Quote:

Originally Posted by Garrett

djstudio what kind of ramsinks are those?
I've never seen them...

they'r from Tt imho
08-12-2007, 01:21 AM
sssf

Wow, those Red tubing are really cool !
08-12-2007, 01:30 AM
Fr4nk

Quote:

Originally Posted by Synthetickiller

So, did anyone ever establish what this blood red colored dye is? I WANT SOME!:up:

Hehe, yeah it's just red food colouring ^^ ooks alot better in persen too, just I need a new cam ^^
08-12-2007, 01:38 AM
SoulsCollective

Food colouring? Blergh. Sediment, here we come.
08-12-2007, 04:46 AM
Ambro

Quote:

Originally Posted by mjassbong

I guess it's time for me to hang up my rig in the gallery. Some of you may have already seen it here:

http://www.xtremesystems.org/forums/...d.php?t=151109

Here are 3 main pics for your viewing pleasure. You can see alot more of it at the above link.

http://i211.photobucket.com/albums/b...3_IMG_1462.jpg

http://i211.photobucket.com/albums/b...1_IMG_1418.jpg

http://i211.photobucket.com/albums/b...1_IMG_1493.jpg

That has to be one of the more thorough w/c rig I've seen here - hats off to you :up:
08-12-2007, 06:09 AM
AndyM

I think I'll put this month's version of 'finished' up :p: ...

http://i80.photobucket.com/albums/j1...luminum023.jpg

All the stuff in my sig put into a TJ07.

Sort of a worklog...http://www.xtremesystems.org/forums/...d.php?t=149265
08-12-2007, 06:21 AM
SoulsCollective

Very clean build, nice except for the manky tubing.
08-12-2007, 06:32 AM
►GIЯΛFFE◄™

There sure are some great looking setups in here.

I can't wait to get my setup, which will be in an Antec 900.

With the UV die(blue in this case, pun not intended), how many UV light/light sources are really needed to really show off the UV die? I don't want to much purple light in my system, lol.
08-12-2007, 12:41 PM
Sparky

I'm using just a dual 12" UV CCFL setup in mine. One in the lower part of the case, one above. Works well.
08-14-2007, 05:33 AM
4Qman

A little Update to my G70..

120.3 + 120.1, 2x DDC Ultra's" GTX Block MCW60 And a EK Res.

http://i19.photobucket.com/albums/b1...n/DSCF0558.jpg

Still testing and sorting cables.
08-14-2007, 11:41 AM
giorgos th.

2 Attachment(s)

new primoflex tubing came in today and i thought to try and see what stuff the Soprano can keep inside...
well,it was hell but everything except the 3ple rad went inside..
08-14-2007, 06:30 PM
MaStA

Very nice setups guys. One day I hope to have a nice watercooling setup...I think getting it setup is what scares me out of it lol.

Jared
08-15-2007, 12:28 AM
Gimmpy224

hey gior, what is holding that rad up? and is it blocking that middle fan from blowing? AND, are you pushing or pulling on that setup?
08-15-2007, 12:53 AM
giorgos th.

1 Attachment(s)

They are some thin foam pads.i now have them in front an in the end of the rad.
the fans are pushing.
08-15-2007, 02:25 PM
rjblanke

New setup. MCR 220 in the top, GTX w/ bowed base, DDC w/ Alphacool top and res attachment. Really wanted to keep things simple with this setup, which is why I went with the res attachment.
http://img365.imageshack.us/img365/9854/img0860rj6.jpg
http://img365.imageshack.us/img365/1092/img0862hk9.jpg
08-15-2007, 03:27 PM
Grinch

Quote:

Originally Posted by rjblanke

New setup. MCR 220 in the top, GTX w/ bowed base, DDC w/ Alphacool top and res attachment. Really wanted to keep things simple with this setup, which is why I went with the res attachment.
http://img365.imageshack.us/img365/9854/img0860rj6.jpg
http://img365.imageshack.us/img365/1092/img0862hk9.jpg

very nice simple setup...I like it alot!..:up:
08-16-2007, 12:22 AM
MF Traum

About a month ago I had to make a temporary setup without case, but seems like it's here to stay. Have to learn to save money since I'm starting my studies again :rolleyes:

Hmm this doesn't really fit in to the "case gallery" category but what a heck...
http://koti.mbnet.fi/vkontio/Kuva%20013.jpg

Rad
Hidden mess :D
08-16-2007, 05:47 AM
pranko1

This looks cool:up:
08-16-2007, 08:14 AM
1badhabit

Quote:

Originally Posted by MF Traum

About a month ago I had to make a temporary setup without case, but seems like it's here to stay. Have to learn to save money since I'm starting my studies again :rolleyes:

Hmm this doesn't really fit in to the "case gallery" category but what a heck...
http://koti.mbnet.fi/vkontio/Kuva%20013.jpg

Rad
Hidden mess :D

The cleanest "Out of the Case" setup I've seen. I like it, hows the cooling?
08-16-2007, 08:36 AM
Enoc

Quote:

Originally Posted by MF Traum

About a month ago I had to make a temporary setup without case, but seems like it's here to stay. Have to learn to save money since I'm starting my studies again :rolleyes:

Hmm this doesn't really fit in to the "case gallery" category but what a heck...

dude looks great..i have something like this going on in wood...but made something extra to grab the radiator...your rad is..BIG....nice MF traum...:D
08-16-2007, 09:47 AM
Ad1tya

OMG, Poor D5.

Great setup though!
08-16-2007, 08:51 PM
ItAm

I had a chance to retake some pictures, so I have a few more taken with the lights out... this time with less blurriness (they're still poor quality, but close enough), so here goes:

http://madskillz.netnuke.net/sIMG_7198.jpg

http://madskillz.netnuke.net/sIMG_7174.jpg

http://madskillz.netnuke.net/sSTJ_7230.jpg

http://madskillz.netnuke.net/sSTA_7221.jpg

http://madskillz.netnuke.net/sSTD_7224.jpg

http://madskillz.netnuke.net/sSTC_7223.jpg
08-16-2007, 11:52 PM
K_O

my new case

http://img167.imageshack.us/img167/4580/p8172753tl3.jpg

http://img329.imageshack.us/img329/1210/p8172745zz5.jpg

http://img329.imageshack.us/img329/4662/p8172747iv1.jpg

http://img166.imageshack.us/img166/8074/p8172748uj1.jpg

http://img150.imageshack.us/img150/7858/p8172750el2.jpg

http://img165.imageshack.us/img165/9204/p8172751fw4.jpg

http://img165.imageshack.us/img165/9412/p8172752mq0.jpg
08-17-2007, 12:00 AM
Garrett

No cooling on the vregs of the 8800GTS? :eek:
08-17-2007, 12:02 AM
K_O

yes :).
08-17-2007, 09:55 AM
Patriote

Quote:

Originally Posted by phelan1777

:shakes:

Indeed. Hope you don't mind RMAing it sometime in the future.

No additives as well ? And there still a lot of bubbles in there!
08-17-2007, 10:39 AM
ANP !!!

Thats bad really bad :eek:.. Everything else looks perfectly good to me
08-17-2007, 12:24 PM
mjassbong

Quote:

Originally Posted by Ambro

That has to be one of the more thorough w/c rig I've seen here - hats off to you :up:

Thanks! :)
08-18-2007, 12:32 AM
Freebo

Not finished yet but should be today!

http://i2.photobucket.com/albums/y32...tion/case1.jpg

http://i2.photobucket.com/albums/y32.../caseangle.jpg

http://i2.photobucket.com/albums/y32...lation/cpu.jpg

http://i2.photobucket.com/albums/y32...alation/gpu.jp

Note this is my ever WC loop so im pritty nervous about it all especialy all my hardware n all, its alot of money to me :(
08-18-2007, 12:48 AM
funkflix

Awesome paintjob mate! :up:

Hope for some final pictures soon!
08-18-2007, 01:20 AM
Movieman

Quote:

Originally Posted by MaStA

Very nice setups guys. One day I hope to have a nice watercooling setup...I think getting it setup is what scares me out of it lol.

Jared

Read this:
http://www.xtremesystems.com/modules...wcontent&id=48
If I can do my first WC setup at age 55, you can!:up:
It's take your time and go step by step, and that manual takes you step by step..
08-18-2007, 01:42 AM
leoftw

Quote:

Originally Posted by Movieman

Read this:
http://www.xtremesystems.com/modules...wcontent&id=48
If I can do my first WC setup at age 55, you can!:up:
It's take your time and go step by step, and that manual takes you step by step..

Nice system Movieman !!!!

I hope to have 8 cores one day , come on Barcelonas :P
08-18-2007, 01:57 AM
MKM

My 1st watercooling build, was a pain in the ass to put it together and fill it up, it better be worth it now, once I've replaced the mainboard I corrupted 6 hours after starting up the system for the first time :banana:

http://img244.imageshack.us/img244/1139/pict23mw5.jpg
08-18-2007, 02:20 AM
leoftw

looking good
08-18-2007, 02:34 AM
Mekrel

Quote:

Originally Posted by Freebo

Not finished yet but should be today!

Note this is my ever WC loop so im pritty nervous about it all especialy all my hardware n all, its alot of money to me :(

It will be ok!

If you're nervous then I would recommend some fesser one non conductive coolant. WJA96 on OcUK has a small leak through some cracked acrylic once but his motherboard was fine. The coolant just left some scum on a USB header on the motherboard which he cleaned off with IPA.

Just take your time to do a proper leak test with tissue paper.

A few things about your loop:

I don't see the need for the delrin 90 degree fitting before the video card block. Tubing should be able to go from your processor block to the VGA block without kinking.

7/16th tubing seals much better than 1/2". Look at your second picture and see how badly the tubing needs to be squished to the barb with a hose clamp.
08-18-2007, 03:39 AM
Family man 72

Quote:

Originally Posted by Freebo

Not finished yet but should be today!

http://i2.photobucket.com/albums/y32...tion/case1.jpg

http://i2.photobucket.com/albums/y32.../caseangle.jpg

http://i2.photobucket.com/albums/y32...lation/cpu.jpg

http://i2.photobucket.com/albums/y32...alation/gpu.jp

Note this is my ever WC loop so im pritty nervous about it all especialy all my hardware n all, its alot of money to me :(

Could we get some more pictures of the case (outside)? Lookin' good m8 :up:
08-18-2007, 09:44 AM
Section8

http://img.photobucket.com/albums/v4...s/100_0406.jpg

http://img.photobucket.com/albums/v4...s/100_0405.jpg

http://img.photobucket.com/albums/v4...s/100_0400.jpg

http://img.photobucket.com/albums/v4...s/100_0391.jpg

http://img.photobucket.com/albums/v4...s/100_0392.jpg

http://img.photobucket.com/albums/v4...s/100_0407.jpg
08-18-2007, 10:48 AM
Psycho_eddie

Now thats a system to be proud of!, what temps you get with vapo on load?
08-18-2007, 01:10 PM
bundymania

lil´ Update - now with lights in the Front :)

http://www.abload.de/img/img_3557ep7.jpg

http://www.abload.de/img/img_3561734.jpg
08-19-2007, 05:39 AM
dnb#

4 Attachment(s)

Changed hoses from 1/2" tygon to ID 8mm OD 11,2mm. Also changed the watercolor and did some cablesleeving to black.

The picture in my avatar is how it looked before. Give me some thoughts! :yepp:
Attachment 63081

Attachment 63087

Attachment 63088

Attachment 63089
08-19-2007, 06:17 AM
Freebo

She be alive :D

Oh and it is Orange UV dye so ill get some night shots tonight.

http://i2.photobucket.com/albums/y32...g/IMG_7401.jpg

http://i2.photobucket.com/albums/y32...g/IMG_7406.jpg

http://i2.photobucket.com/albums/y32...g/IMG_7402.jpg

http://i2.photobucket.com/albums/y32...g/IMG_7403.jpg

http://i2.photobucket.com/albums/y32...g/IMG_7405.jpg

http://i2.photobucket.com/albums/y32...g/IMG_7404.jpg

Quote:

Originally Posted by Family man 72

Could we get some more pictures of the case (outside)? Lookin' good m8 :up:

http://i2.photobucket.com/albums/y32...together/3.jpg

http://i2.photobucket.com/albums/y32...together/4.jpg

Ill get more when the windows are finished.

Oh and check link in my sig for the mod log.
08-19-2007, 06:33 AM
Family man 72

Quote:

Originally Posted by Freebo

She be alive :D

Oh and it is Orange UV dye so ill get some night shots tonight.

http://i2.photobucket.com/albums/y32...g/IMG_7401.jpg

http://i2.photobucket.com/albums/y32...g/IMG_7406.jpg

http://i2.photobucket.com/albums/y32...g/IMG_7402.jpg

http://i2.photobucket.com/albums/y32...g/IMG_7403.jpg

http://i2.photobucket.com/albums/y32...g/IMG_7405.jpg

http://i2.photobucket.com/albums/y32...g/IMG_7404.jpg

http://i2.photobucket.com/albums/y32...together/3.jpg

http://i2.photobucket.com/albums/y32...together/4.jpg

Ill get more when the windows are finished.

Oh and check link in my sig for the mod log.

Nice, I really like that orange color :banana: :banana3: :banana:
08-19-2007, 06:57 AM
xpatar

1 Attachment(s)

Here it is, my wc rig
08-19-2007, 10:41 AM
italian soldier

Quote:

Originally Posted by dnb#

Changed hoses from 1/2" tygon to ID 8mm OD 11,2mm. Also changed the watercolor and did some cablesleeving to black.

The picture in my avatar is how it looked before. Give me some thoughts! :yepp:

:slobber: :bows: It's fantastic!!!
08-19-2007, 10:50 AM
dnb#

Quote:

Originally Posted by italian soldier

:slobber: :bows: It's fantastic!!!

Thanks! i really like to hear that!
08-19-2007, 10:54 AM
togaman5000

xpatar: definitely looks good, i'm a fan of the v1000 and 2000 series cases.

i guess i could make some like joke about wire management, but to tell the truth, my case looks worse than yours!
08-19-2007, 11:27 AM
PsYkHoTiK

yet another TJ07

I finished my build a while back (long awaited upgrade).

http://taib.rojakpot.com/case1.jpg

http://taib.rojakpot.com/case2.jpg

By no measure silent though (3 x 120mm panaflo ultra high speeds) but I've lived with louder. :D

Dtek FuZion CPU
Swiftech MCW60
DDC w Petra's Top
MCR320-QP
Tygon R3603 1/2" ID 3/4" OD
Coolant is a 1:9 Pentosin G11 and Distilled Water
08-19-2007, 12:29 PM
xpatar

Quote:

Originally Posted by togaman5000

xpatar: definitely looks good, i'm a fan of the v1000 and 2000 series cases.

i guess i could make some like joke about wire management, but to tell the truth, my case looks worse than yours!

Thanks man, you know how it is, I tried to keep everything inside the case, which is for the circumstances rather small, definitely an excellent case.
08-19-2007, 12:29 PM
mike8913

Thought I'd add to the discussion. I recently heavily modified my Nine Hundred and water cooled it as well. I will say that it was the biggest pain in the ass I've ever had to deal with, but the results were well worth the effort. Here's some photos.

http://photos-b.ak.facebook.com/phot...19469_1982.jpg
http://photos-c.ak.facebook.com/phot...19470_2415.jpg
http://photos-d.ak.facebook.com/phot...19471_2859.jpg
http://photos-a.ak.facebook.com/phot...19472_3222.jpg
http://photos-b.ak.facebook.com/phot...19473_3548.jpg
http://photos-d.ak.facebook.com/phot...19475_4384.jpg
http://photos-a.ak.facebook.com/phot...19476_4703.jpg
This next one, the 12volt cord was lengthened and modified from a 6 pin to a 4 pin connector (Thermaltake decided an adapter wouldn't be a good thing to include) I'm still not happy about this cut out though, it's not as clean as I'd like.
http://photos-b.ak.facebook.com/phot...19477_5060.jpg
http://photos-c.ak.facebook.com/phot...19478_5386.jpg
http://photos-d.ak.facebook.com/phot...19479_5790.jpg
http://photos-a.ak.facebook.com/phot...19480_6414.jpg
http://photos-b.ak.facebook.com/phot...19481_6756.jpg
http://photos-c.ak.facebook.com/phot...19482_7074.jpg
http://photos-d.ak.facebook.com/phot...19483_7401.jpg
http://photos-a.ak.facebook.com/phot...19484_7736.jpg
http://photos-c.ak.facebook.com/phot...19486_8449.jpg
http://photos-d.ak.facebook.com/phot...19487_8804.jpg
http://photos-a.ak.facebook.com/phot...19488_9214.jpg
http://photos-c.ak.facebook.com/phot...19490_9976.jpg
http://photos-d.ak.facebook.com/phot...019491_329.jpg
I'm sure many will disagree with me, but i found the best location on this case for the fill port would be at the bottom. It can be inconvenient for filling, but i really don't see a better location available.
http://photos-a.ak.facebook.com/phot...019492_675.jpg
http://photos-c.ak.facebook.com/phot...19494_1472.jpg
http://photos-d.ak.facebook.com/phot...19495_1894.jpg
http://photos-a.ak.facebook.com/phot...19496_2369.jpg
http://photos-b.ak.facebook.com/phot...19497_2788.jpg
http://photos-c.ak.facebook.com/phot...19498_3288.jpg
http://photos-d.ak.facebook.com/phot...19499_3743.jpg
http://photos-a.ak.facebook.com/phot...19500_4098.jpg
http://photos-c.ak.facebook.com/phot...19502_4803.jpg
http://photos-d.ak.facebook.com/phot...19503_5143.jpg
http://photos-a.ak.facebook.com/phot...19504_5506.jpg
http://photos-b.ak.facebook.com/phot...19505_5895.jpg
http://photos-d.ak.facebook.com/phot...19507_6618.jpg
http://photos-a.ak.facebook.com/phot...19508_7185.jpg
http://photos-b.ak.facebook.com/phot...19509_7545.jpg
http://photos-c.ak.facebook.com/phot...19510_7881.jpg
http://photos-d.ak.facebook.com/phot...19511_8218.jpg
http://photos-b.ak.facebook.com/phot...19513_9048.jpg
http://photos-c.ak.facebook.com/phot...19514_9387.jpg

Well....sorry i got so liberal with the picture taking. The system rocks my socks. Here's the specs.

Intel Core 2 Due E4300 over clocked to 3.9 Ghz from 1.8 Ghz
Nvidea 8800GTS 620mb Overclocked horrendously (can't give exact numbers at this time)
2 GB of OCZ
2x 320 GB Barracudas in RAID 0

hope you have enjoyed folks. with a little TLC the Antec Nine Hundred can be a beautiful case.
08-19-2007, 02:58 PM
moditir

how did you mount the pump in your antec 900
08-19-2007, 06:02 PM
SNiiPE_DoGG

Quote:

Originally Posted by moditir

how did you mount the pump in your antec 900

are you blind? there are like a million pics of it....
08-19-2007, 08:10 PM
whoodiestyle

Quote:

Originally Posted by SNiiPE_DoGG

are you blind? there are like a million pics of it....

hey no need to be so mean
08-19-2007, 08:59 PM
[cTx] Nooc

Quote:

Originally Posted by SNiiPE_DoGG

are you blind? there are like a million pics of it....

there are 3 and none of them show the mounting :rolleyes:

I think he made a viable question, no need for douchebagery here
08-19-2007, 09:15 PM
SaII

i say the tubing is supporting the pump with some fish strings on the top, haha
08-19-2007, 09:24 PM
Riddlinkidstone

Updated Setup:

http://i5.photobucket.com/albums/y16...uternew007.jpg
http://i5.photobucket.com/albums/y16...uternew005.jpg
http://i5.photobucket.com/albums/y16...uternew001.jpg

Enjoy!

Show 100 post(s) from this thread on one page

All times are GMT -8. The time now is 08:25 PM.

XtremeSystems