Thanks Brother gonna get one and sdid you use that 3M FRAG TAPE
Thanks Brother gonna get one and sdid you use that 3M FRAG TAPE
Alittle better but in short......NO!!!Quote:
Originally Posted by Cascades
i was running 2.35 volts never any higher.
Quote:
Originally Posted by raju
what's the highest core clock anyone has got on the E6850 with this board on air?
I just ordered some OCZ Flex XTC (PC2 9200) now maybe I'll get the opportunity to see the other half of the Board I have been missing!:mad:
how i envy you guys...:clap:Quote:
Originally Posted by Brother Esau
just having some fun on water with 4gb of ram... benching voltages apply of course...
http://img444.imageshack.us/img444/2990/3dmk06ql5.jpg
knocked my 975 chipset cpu score off it's perch by around 100points, not too bad at all..
Nice. :D
Just got the board in the other day and went to 400 w/ stock volts as that's always been pretty easy, but noticed this while Orthos blending...
http://img.photobucket.com/albums/v2...ltagespike.jpg
Just SG freakin' out right?
Allright,
I got all my parts today ...
DFI P35-T2R
2*1 GB Crucial Ballistix Tracer PC8500
Q6600 G0 (woohoo)
Thermalright Ultra-120 Extreme
and other parts are not important
First, I build it, all was set to first boot
I boot, I see the bios and all good .. it's working :)
Put Vista CD in, it was slow slow slow ... I was almost at the end and bang, error fiule corrupted or something so .. hmmm
Tried Windows XP ...
was slow slow slow ... said wtf
I had my Raptor (OS drive) in the yellow sata .. tried in green sata ... ho it works now fast in XP ... try Vista, same error so .. guess my Vista CD is bad or something gonna try in another PC tommorow.
But well, I install XP and everything is oke, install drivers, all good
So now I go into the bios and set my memory to DDR2-1066 MHZ because it was at 800 by default, also setted the voltage to 2.1 to help a bit. Now I wanted to see if my system was stable at stock settings, try orthos blend, banh after 3 seconds error .. hmmm ... go into bios try 2.2V for the memory, into windows, bang same thing
I putted the memory back to 800 mhz with 2V ... orthos is fine now
So I'm wondering what's going on, it's like my memory can't get at the normal speed it's suppose to do.
Anyone got problem like that with that board ? I have the latest bios btw.
Also my temp (stock speed idle) in SG are
CPU : 18
PWM : 40
CHIPSET : 43
on Core Temp :
Core 0: 30
Core 1: 25
Core 2: 25
Core 3: 30
is it normal ? .. I didn't installed the heatpipe addon yet, will do soon but I got so much problem so I wasn't in mood to install it
It's a lot of question but I want to know if those temps are normal at stock speed. If yes then I can move on the next level ... but need to know about my memory too ...
Anyway, gonna wait some answers from the pro and will make more test after.
Thank for reading and thx for the help too !
EDIT : Well, my pc crashed again at 800 MHZ with 2V .. now at 800 with 1.8v .. I'm trying to figure out what's wrong ... will wait help :(
im using them, seems mine might be giving me problems, let me know if you can post with stock bios default dram voltage, as mine wont let me anymore, have to swap in another cheap stick of ram then change the voltage to 2.2 just to post.
Andrew
Quote:
Originally Posted by Brother Esau
Was just testing the new GPU-Z utility by techpowerup (looks up GPU specs).
It stated at PCI-Ex as 16x @ 1x .... WTF !
rechecked it with everest/cpu-z and it confirmed the PCI-Express was running @ 1x ......
Upped the PCI-Express to 110 and now all is well X16
Haven't anyone else encountered the same problem ?
Thanks for the heads up...I will have to check that and see.Quote:
Originally Posted by SmokeyTheBandit
16x here w/ 100mhz in bios. I'm only @ 400fsb w/ stock volts tho.
Thx to ppl who didn't answer and totally skipped my post .. ;)
But anwyay I gave a bit more of NB voltage and now everything seems ok, seems that at stock the voltage on the NB wasn't ok
Will try to OC later will post some screens and all :)
Honestly don't have any recommendations for you. I know this board seems very picky about RAM. My OCZ Titanium seems very very happy though.Quote:
Originally Posted by MacKaquE
Right above your post you'll see my temps. For reference I'm aircooled in a Stacker 810 w/ 26C ambient. Most settings were stock, but the FSB's @ 400, so CPU's @ 3200. And that pic was loaded w/ Orthos blend.Quote:
Originally Posted by MacKaquE
Hope that helps.
ps. I started @ page 1 and just flipped through everyone else's pictures to compare my Smart Guardian pics w/ their's. 2 variables always make it tough tho...room temp and cooling.
edit: i fail @ forums :(
Quote:
Originally Posted by Jodiuh
Well I suggest that you make a permanent signature for future questions so people don't have to go 2-3 pages back to get the info needed.
How's this? Overkill I think. :D
Just a little bit mate cuz we don't troub;e shoot LCD & Exacta Mat:D
lol
Brother >>>you are A Maroon PITA now...I'm jealous.
Quote:
Originally Posted by CyberDruid
Just trying to Overclock you're Mind:yepp::wiggle:
:kitten2: :poke: :peace: :hehe: It's working
Alpine Valley East Troy, WI 1989:DQuote:
Originally Posted by CyberDruid
You're gonna make me cry man...
THAT's Dear Mr. Fantasy playing..tell me I'm wrong.
Quote:
Touch Of Gray, Jack Straw, Jack A Roe, Minglewood Blues, Friend Of The Devil, Memphis Blues, Bird Song, Promised Land Sugar Magnolia-> Scarlet Begonias-> Women Are Smarter-> Eyes Of The World-> Drums-> Space-> China Doll-> Dear Mr. Fantasy-> Hey Jude Reprise-> Throwing Stones-> Sunshine Daydream, E: The Mighty Quinn