Asus Rampage III Extreme Owners Thread

Printable View

Show 100 post(s) from this thread on one page

06-18-2010, 07:41 AM
NathObeaN

I was just about to order myself a R3E EK block when I noticed that it doesn't even cover the mofsets properly... bit of a silly design isn't it?

EDIT: Sorry I think I mean VRMs, I'm very tired atm so don't take the p***. lol
06-18-2010, 07:50 AM
Hondacity

yep normally you cool the mosfets....
06-18-2010, 07:55 AM
NathObeaN

Quote:

Originally Posted by Hondacity

yep normally you cool the mosfets....

Judging by this picture it isn't doing that then?

http://i696.photobucket.com/albums/v...ek/ekfull5.jpg
06-18-2010, 07:55 AM
SkOrPn

Quote:

Originally Posted by westokyo

Missing ram, just to update the board, I found the issue behind the missing 4gigs of ram. The CPU seat had 2 bent pins

I am surprised the machine would even post. So the racking of my brain over the past 3 weeks was this. I manage to slightly bend them back into place (not an easy feat if you are hung-over). But as you can see, it's working perfectly.

Also I would like to thank Dansobolanu from another board as he was going through the same issue and pointed me in the right direction. Cheers for now and the next round of beers are on me!

LOL, westokyo, on June 14th I told you to look at the pins under the cpu because I thought for sure you had bent cpu socket pins. I have a electronics component magnifying glass i use just for this procedure. I'm impressed you bent them back yourself, nice work man :up: glad you got her fixed....

http://www.xtremesystems.org/forums/...&postcount=881

Quote:

Originally Posted by SkOrPn

Welcome to XS westokyo. Has this 12 gigs ever showed up in bios and Windows before? Or has it always been gone since you put the system together? Sounds to me like the CPU did not seat both times, only trying twice isn't enough imo. I would look at the pins under a magnifying glass to see if there are any bent pins (if thats even possible). Almost everyone here has solved the missing memory problems by re-seating the cpu. If not, I think its time you RMA because you could have a cpu socket or memory socket problem. One last thing to try would be to fire her up with only one stick in slot 1, then do the same for slot 2, and then slot 3 and so on. If the comp does not fire up one of those times then you have a bad connection somewhere, either the cpu socket or memory slot. If you do find a slot not working, you could then try another stick in that same non working slot just to see if its the stick you just tried. I have a feeling you probably tried this though. Let us know please...
06-18-2010, 08:11 AM
donmarkoni

1 Attachment(s)

Quote:

Originally Posted by Soulwind

Here's a question that hopefully somebody can answer for me.

The board has a standard 24-pin power plug, 2 8-pin +12v mb plugs, and 2 molex power plugs (ez-plugs).

My power supply, an Ultra X3 1000w, that I was hoping to reuse in this new machine only has 1 8-pin +12v mb plug (and 1 4-pin +12v mb plug).

I just plugged in the single 8-pin +12v and one of the molex plugs (ez-plug) and powered up to make sure I didn't have a DoA board before
starting in on the build....and everything booted up just fine.

However, am I going to run into problems once I start actually stressing the board with use? Do I have to get a different power supply?

[on a side-note: those 8-pin +12v plugs came capped off with a 1/2 size (ie covers 4 of the pins) cover caps. Could/Should I maybe use
the 4-pin +12v plug that the power supply also has on one of these, with the cap covering the other 4 pins?]

Thanks.

You'll be fine IMO. :up:
My PSU also has 1x8pin + 1x4pin. I plugged 8pin up and 4pin down leaving bottom half empty. No problems so far. Not even using molexes.

Quote:

Originally Posted by NathObeaN

Judging by this picture it isn't doing that then?

http://i696.photobucket.com/albums/v...ek/ekfull5.jpg

Do you really think EK would make such a mistake?
Those are not MOSFETs, those are solid chokes AFAIK. They don't need to be cooled. Heat sink is over them cause it needs to be relatively large to cool MOSFETS.
Here is the picture:
06-18-2010, 08:13 AM
SkOrPn

Quote:

Originally Posted by NathObeaN

Judging by this picture it isn't doing that then?

http://i696.photobucket.com/albums/v...ek/ekfull5.jpg

Judging by this picture, it looks like they could have easily cooled both....
06-18-2010, 08:23 AM
Linuxfan

I did my LN2 runs with just 1x 8-pin CPU power and it worked fine.... If you have an extra 4-pin CPU power connector it wouldn't hurt to plug it in. :p:
That WB is made for the motherboard and cools all of the chipsets. :up:
06-18-2010, 08:25 AM
kortas

mine are just warm, never get hot not even under extreme load, so I don't see the point in cooling them.
06-18-2010, 08:26 AM
Brama

Quote:

Originally Posted by SkOrPn

Judging by this picture, it looks like they could have easily cooled both....

It is not so easy as it seems.
The top of the chokes is not flat and normally it is done by a fragile material.
Second they can go higher than 150 C° without any issue, as they are passive components.
06-18-2010, 09:45 AM
Soulwind

Is everybody turning the QPI Line Load Calibration on or off (the one that requires using the jumper on the mb)?
06-18-2010, 09:53 AM
calves

Quote:

Originally Posted by Soulwind

Is everybody turning the QPI Line Load Calibration on or off (the one that requires using the jumper on the mb)?

yes, requires using the jumper on the mb, I got into my on me and still not solved anything, the instability continues. I can not get above 4Ghz
06-18-2010, 09:53 AM
fmsam

most ppl who run over 4.0 use 100% yep
06-18-2010, 10:11 AM
AKHandyman

Another question from a relative new-comer to this board ... I want to get some new memory and I am looking at some of the RAM from Mushkin. What speed should I get for this board? I really like Mushkin and just need to know what would be the best to get for this board for a 24/7 stable 4.4GHz overclock?
06-18-2010, 10:25 AM
donmarkoni

Quote:

Originally Posted by AKHandyman

Another question from a relative new-comer to this board ... I want to get some new memory and I am looking at some of the RAM from Mushkin. What speed should I get for this board? I really like Mushkin and just need to know what would be the best to get for this board for a 24/7 stable 4.4GHz overclock?

:welcome:
Check this out: Asus Rampage III Extreme - results thread

You can find a lot of my BIOS settings. As you see in my sig I'm using Mushkin memory and that is 998691. For 24/7 you can use 1680 mem (210x8) if you want 4410 core, or for summer days 1600/2000 mem (200x8/x10) if you need to drop to 4200 core.

BTW, is it you looking at Aurora Borealis on your avatar?
06-18-2010, 10:27 AM
kortas

Quote:

Originally Posted by AKHandyman

Another question from a relative new-comer to this board ... I want to get some new memory and I am looking at some of the RAM from Mushkin. What speed should I get for this board? I really like Mushkin and just need to know what would be the best to get for this board for a 24/7 stable 4.4GHz overclock?

Mushkin Redline is good ram
06-18-2010, 10:48 AM
AKHandyman

Quote:

Originally Posted by donmarkoni

:welcome:
Check this out: Asus Rampage III Extreme - results thread

You can find a lot of my BIOS settings. As you see in my sig I'm using Mushkin memory and that is 998691. For 24/7 you can use 1680 mem (210x8) if you want 4410 core, or for summer days 1600/2000 mem (200x8/x10) if you need to drop to 4200 core.

BTW, is it you looking at Aurora Borealis on your avatar?

Hey donmarkoni~ I have been to i4memory site before ... great site!! Haven't been there in a long time though. I remember eva2000 from DFI days ... :up:

I have looked at this memory from Mushkin: Mushkin Enhanced Redline
That product number is 998805 ... where did you get yours?

And no, that is not me ... but I have been known to stand out in the cold and look at the Northern Lights for long periods of time! ;)
06-18-2010, 10:54 AM
AKHandyman

donmarkoni ~ I see that maybe Mushkin have re-released that Enhanced Redline as later product number (998805) ... I have ordered that stuff from the 'Egg.

Looks like same stuff as yours ... :up:
06-18-2010, 12:09 PM
donmarkoni

Quote:

Originally Posted by AKHandyman

Hey donmarkoni~ I have been to i4memory site before ... great site!! Haven't been there in a long time though. I remember eva2000 from DFI days ... :up:

I have looked at this memory from Mushkin: Mushkin Enhanced Redline
That product number is 998805 ... where did you get yours?

And no, that is not me ... but I have been known to stand out in the cold and look at the Northern Lights for long periods of time! ;)

Must be amazing! :)

Quote:

Originally Posted by AKHandyman

donmarkoni ~ I see that maybe Mushkin have re-released that Enhanced Redline as later product number (998805) ... I have ordered that stuff from the 'Egg.

Looks like same stuff as yours ... :up:

Great! Post results and experiences as soon as you get it.
06-18-2010, 12:41 PM
kortas

3 Attachment(s)

Just thought I'd pop some extra pictures on here,
re-routed the water, and changed some cable locations, gave it a full clean inside.

still unsure about the fans, thinking maybe some acryan red glow fans??
06-18-2010, 12:55 PM
fmsam

Great job there Kortas
looks great m8 well done
06-18-2010, 03:23 PM
Mungri

The 0.602 bios fixed my 4.2 Ghz BSODs :)

http://img197.imageshack.us/img197/2905/4200.png

Thats nice and stable now, except for my freaky core 1, but its nowhere near that bad when playing games.

Pics again:

http://img9.imageshack.us/img9/8553/dsc00573vs.jpg

http://img193.imageshack.us/img193/9315/dsc00571sa.jpg

http://img688.imageshack.us/img688/1850/dsc00580h.jpg

http://img215.imageshack.us/img215/7448/dsc00593xu.jpg

My wonderful SE K850i..... what a failure camera it is :rofl:
06-18-2010, 03:30 PM
thijs

Just got my R3E / 980X , but under XP ( 32bit i think ) , i cant change the multiplier with the Evo program in windows XP, is that known or? bclock changing does work.
06-18-2010, 04:16 PM
Linuxfan

Quote:

Originally Posted by thijs

Just got my R3E / 980X , but under XP ( 32bit i think ) , i cant change the multiplier with the Evo program in windows XP, is that known or? bclock changing does work.

Try the ROG Connect with a laptop/netbook or some other device and change the frequencies and voltages that way.... worked great for me!
Don't know that it changes the multi though. Why would you need to change the multiplier? :confused:
06-18-2010, 08:59 PM
SkOrPn

Quick question, I am going to find my modest 24/7 oc here soon and want to know what would be best, as in most stable and safe. I am looking at 4ghz 24/7 and wondering should I work at 19x210, 20x200, 21x190 or should I just do something not so high for 24/7. Any ideas what would work best as a stable gaming platform? Thanks
06-18-2010, 09:05 PM
Linuxfan

Quote:

Originally Posted by Bodar

Hey Splave.. I've been meaning to ask.. How is your chip in vantage and 06 man.. I noticed that some of the chips I have clock high but dont run benchies at high frequencies.. Others clock low but run benchmarks higher.. Its a weird thing really.. Just did a quick test on one... 5824mhz quick run on vantage.. Just wanted to know your experience on the 980x. Thanks man!! :) cheers!! -Beaux

Hey man.
Did you get my PM? :up:

Show 100 post(s) from this thread on one page

***Asus Rampage III Extreme Owners Thread***

Asus Rampage III Extreme Owners Thread