[LL A05] Simplicity

Quote:

---

Originally Posted by Kibbler

My humble 2c on tube routing if you don't mind: I'd do pump -> CPU -> Rad -> GPU -> Res. You'll need 2x90s on the GPU, rest should be fine. Raise the pump by about 2cm so the pump-to-CPU line is level. :)

---

I'll try it with the other suggestions sometime soon. :up:

Quote:

---

Originally Posted by dpajur

really like the project, i'm thinking of doing something similar myself.

just wondering, if you're using a matx motherboard, could you place the drives underneath the 5.25" bays (i'm assuming that's where they are originally) and have room on top of the case for another rad?

how much space is available on top if you're using the 5.25" bays?
and is there a point in putting a 1x140 rad up there?

---

Thanks!
You could easily fit another 2.120 radiator up there, it's about 8,5cm from the top to the motherboard if you use the original hard drive cage and 5,25" slots.

Quote:

---

Originally Posted by The Viking

Awsum pictures!

Question: Did you break the warranty when you painted the gfx "casing" ? I would love to do something simular with my 5850 gfx plastic ugly thing. AND still maintain the warranty :P

---

Thanks, yeah I did.
You could probably buy another stock cooler from someone who's doing LC or something, and paint i instead. :)

Quote:

---

Originally Posted by shawnoen

Did you get a new Geforce decal from somewhere to apply after you painted your cards housing?

Been thinking about painting mine as well but wanted to find one before I do it...

http://img163.imageshack.us/img163/7799/20331886.jpg

---

No I peeled it off with a needle before painting the housing, it was thick separate letters with some glue on the back. ;)

Quote:

---

Originally Posted by theToX

pure awesome Laine.

---

Thanks man!


I finally got hold of my dremel yesterday, so I got to work with the case.
Still just pretty raw "in action"-pics.

First off, I drilled and tapped four holes for the new feet.
http://img94.imageshack.us/img94/2503/58510391.jpg

Insert radiator here!
http://img94.imageshack.us/img94/4079/29782631.jpg

A few cuts later, I didn't have my grinding tools at home so it's a pretty raw cut.
http://img94.imageshack.us/img94/1448/43020890.jpg

A simple cut to the radgrill, so that it clears the foot.
http://img264.imageshack.us/img264/6856/76724707.jpg

Fits quite nicely, but I'm not using this one, it was just for testing before I cut the real thing.
http://img264.imageshack.us/img264/3844/39455810.jpg

The new feet looks so good on the case.
http://img651.imageshack.us/img651/3990/46144721.jpg

Same goes for the back.
http://img714.imageshack.us/img714/2323/68510465.jpg

More!!!!

Really nice work, looks good.

Quote:

---

Originally Posted by Antioch

More!!!!

---

Here you go. ;)

Quote:

---

Originally Posted by kgtiger

Really nice work, looks good.

---

Thanks man, really appreciate it! :up:

Since the project is called "Simplicity", I thought I'd go oldschool.
http://img85.imageshack.us/img85/8673/93697002.jpg

Apparently the reused LiLi piece had holes in it..
http://img718.imageshack.us/img718/7025/80784401.jpg

Temporary bolts and nuts.
http://img704.imageshack.us/img704/8913/57143226.jpg

At least the measurements were correct.
http://img685.imageshack.us/img685/3155/31728381.jpg

http://img202.imageshack.us/img202/2838/44405196.jpg

I think I'll redo it in acrylic instead.

haha, reusing junk of another cut, that looks very familiar to me :D

good job :up:

Yea, I think doing it in acrylic would match the shiny look you've got going on in the rest of the build.

Thanks for the "more," but unfortunately it wasn't enough and still I need... MORE!!!!

:)

Your measurements were bang! on! mate, nice fab work.
Would look excellent powdercoated black.
If you happen to make it out of perspex I feel a tinted/smoked perspex would look excellent.

Keep us popsted champ!

Amazing work so far! The pump mount is spot on!

Quote:

---

Originally Posted by Oli4v

haha, reusing junk of another cut, that looks very familiar to me :D

good job :up:

---

Well, it keeps my garden free from sheets of metal. ;)

Quote:

---

Originally Posted by Antioch

Yea, I think doing it in acrylic would match the shiny look you've got going on in the rest of the build.

Thanks for the "more," but unfortunately it wasn't enough and still I need... MORE!!!!

:)

---

It's not much but it's something.

Quote:

---

Originally Posted by kgtiger

Your measurements were bang! on! mate, nice fab work.
Would look excellent powdercoated black.
If you happen to make it out of perspex I feel a tinted/smoked perspex would look excellent.

Keep us popsted champ!

---

Thanks!
Yeah, if I make it out of acrylic I'll be sure to tint and blast it. :up:

Quote:

---

Originally Posted by dingdong555

Amazing work so far! The pump mount is spot on!

---

Thanks mate, but I dont know if it'll be used.


Tried to clean up the mount, even if I'm not going to use it.
http://img715.imageshack.us/img715/174/22414677.jpg

http://img686.imageshack.us/img686/2729/30458589.jpg

http://img9.imageshack.us/img9/8467/36947422.jpg
White studios and daylight isn't really my thing, so I'm sorry about the quality.

That looks pretty good, let's get you that sleeving now!

Laine, every build you do I like. one hell of an eye for detail.

Quote:

---

Originally Posted by Dc3R

That looks pretty good, let's get you that sleeving now!

---

Thanks, yeah! :up:

Quote:

---

Originally Posted by theToX

Laine, every build you do I like. one hell of an eye for detail.

---

Thanks man, really appreciate it! :)

Some testing of the mount, I'll probably get two 90 degree fittings to lower the Pump-GPU tubing, getting a nicer bend.
http://img25.imageshack.us/img25/5934/44058664.jpg

http://img402.imageshack.us/img402/7472/94608142.jpg

http://img36.imageshack.us/img36/9077/35364353.jpg

A couple of pages back, some of you requested high res pics.
Did a couple just for you. ;)
http://img193.imageshack.us/img193/4484/1bigjf.th.jpg

http://img35.imageshack.us/img35/4316/2bigd.th.jpg

Looks sexy. Even though you're aiming for Feser One Blue coolant, I urge you to fill her up ONCE with some plain water and see how it looks before you go for the blue.

My god the detail...

Laine you are a master, keep the photos coming:up:

Looks GREAT so far, keep these updates comming!

Quote:

---

Originally Posted by Antioch

Looks sexy. Even though you're aiming for Feser One Blue coolant, I urge you to fill her up ONCE with some plain water and see how it looks before you go for the blue.

---

i agree. i think it looks pretty damn slick with the clear tubing. clear fluid would help keep that look

nice one laine!!

No words are available to describe my admiration of your work (building and photography). :woot:

It is work like this that makes me want to either not mod or put what I've done back in the box.......however it can also make me want to strive to achieve a small percentage of your quality. Because if I could do that I know I'll have created something of beauty. :up:

The clear tubing was, in my opinion, really uber nice. I have a build in the attic that has been waiting for some inspiration and think you've done that with this and Crystal Clear. Just need the funding and a cooperative wife! :rofl: :ROTF: It has been a good example of "build it when the parts are here or forget it".

Also all these shots of EK items have me moving away from Aqua Computer if I ever get around to doing my second WC build. ;)

Quote:

---

Originally Posted by Antioch

Looks sexy. Even though you're aiming for Feser One Blue coolant, I urge you to fill her up ONCE with some plain water and see how it looks before you go for the blue.

---

Yeah, I'll probably have to leak test it, and I'll use destilled for that. ;)

Quote:

---

Originally Posted by Anemic

Looks GREAT so far, keep these updates comming!

---

Thanks, I'll try! :)

Quote:

---

Originally Posted by theToX

i agree. i think it looks pretty damn slick with the clear tubing. clear fluid would help keep that look

---

Yeah, but thats not really the theme I'm going after. ;)

Quote:

---

Originally Posted by GregSG

nice one laine!!

---

Thanks! :)

Quote:

---

Originally Posted by jedihobbit

No words are available to describe my admiration of your work (building and photography). :woot:

It is work like this that makes me want to either not mod or put what I've done back in the box.......however it can also make me want to strive to achieve a small percentage of your quality. Because if I could do that I know I'll have created something of beauty. :up:

The clear tubing was, in my opinion, really uber nice. I have a build in the attic that has been waiting for some inspiration and think you've done that with this and Crystal Clear. Just need the funding and a cooperative wife! :rofl: :ROTF: It has been a good example of "build it when the parts are here or forget it".

Also all these shots of EK items have me moving away from Aqua Computer if I ever get around to doing my second WC build. ;)

---

Thanks, really! :up:
Yeah I have pretty cooperative friends and family so that's why things are running smoothly.

Both EK and Aqua Computer makes really nice products in my opinion, why not mix them up? ;)


A nice little package from Munich arrived today, just missing a PSU.
http://img534.imageshack.us/img534/2044/49517097.jpg

http://img63.imageshack.us/img63/3813/98174516.jpg

http://img63.imageshack.us/img63/7387/79531498.jpg

http://img63.imageshack.us/img63/2549/97713554.jpg

http://img638.imageshack.us/img638/9436/51917470.jpg

http://img708.imageshack.us/img708/1580/34874373.jpg

Still loving this build, Laine. The sleeving colors are going to look great.

Quote:

---

Originally Posted by shazza

Still loving this build, Laine. The sleeving colors are going to look great.

---

Thanks Shaz! :up:

The PSU just arrived, I'm going to start the slaughter tonight.
THe cables will be cut to exact lengths, all excessive cabling will be removed completely and it will be painted in a glossy white.

Some pics before modding.
http://img709.imageshack.us/img709/1156/59039538.jpg

http://img138.imageshack.us/img138/1903/48355859.jpg

http://img695.imageshack.us/img695/3728/98518994.jpg

http://img21.imageshack.us/img21/7875/38354822.jpg

aww man

Can't wait to see wad ur gonna do to the psu

Quote:

---

Originally Posted by GregSG

aww man

Can't wait to see wad ur gonna do to the psu

---

Worked all night, here are some teasers of what's been done 'til now. ;)

The colour scheme.
http://img716.imageshack.us/img716/2509/22144190.jpg

http://img717.imageshack.us/img717/2194/80364725.jpg

Absolutely no see through, thanks to some tips from Nils.
http://img716.imageshack.us/img716/1906/38496980.jpg

The atx24 lost 25cm of its length.
http://img716.imageshack.us/img716/1743/23388761.jpg

Ops, did I void the warranty? :confused:
http://img269.imageshack.us/img269/8664/46211619.jpg


Going to keep on working strong, more updates to come soon.
Thanks for watching!

The sleeving is finished, I left the PSU with the bare essentials.
Atx24, atx4, two PCI-e 6 and a single molex.

I'll use the molex to make my own splitter customized to fit the project.

http://img442.imageshack.us/img442/3860/90179281.jpg

http://img40.imageshack.us/img40/8067/60297986.jpg

http://img705.imageshack.us/img705/9498/45930416.jpg

http://img97.imageshack.us/img97/7452/63321645.jpg

http://img134.imageshack.us/img134/4591/22752898.jpg

Cheers.

The grand bleu and white look stunning together! Great job :D