[Team.AU]Gigabyte X58-UD5, 3GB Corsair 1866MHz CAS8, Core i7 920 Testing thread

Printable View

Show 100 post(s) from this thread on one page

12-04-2008, 04:36 PM
dinos22

Quote:

Originally Posted by FUGGER

Dinos, you need to watch your amps to know what the single stage can handle.

When watching amps you will see the exact limits of any cooler, this should be used in any professional heatsink review in the future. You are experiencing the amp runaway due to the capacity of the cooler.

yeah i'll buy that amp meter to check this amp runaway business

are you saying now that amp runaway happens when the CPU exceeds coolers heat dissipation

i thought it was a high volt issue and not this :S
12-04-2008, 04:36 PM
BenchZowner

Get your phase tuned for higher load Dino.
You will gain some degrees and reduce the Δt.
12-04-2008, 04:39 PM
dinos22

Quote:

Originally Posted by BenchZowner

Get your phase tuned for higher load Dino.
You will gain some degrees and reduce the Δt.

there is no one here aside from kayl who lives some 5000km west from me lol

i dont really need to tune it. i just use SS lightly for occasionally subzero tests and yes it would be nice if it could handle higher load but that;s what all those LN2 pots are for right ;) :D
12-04-2008, 04:41 PM
dinos22

Charles will i experience this runaway amp phenomena even if i try LN2 with exactly the same settings

i am just trying to get my head around how this works
12-04-2008, 04:57 PM
dinos22

btw i had a watt meter hooked up

ok before i turned on the system i had 560-630W consumption from phase change, monitor and laptop which were all hooked up on the same plug

on STOCK setup 3DMARK Vantage in second GFX test peaked at 1488Watts .... so that means that the system at stock peaked at around 860W (1488-630)

now i am not sure if the second card was drawing full power as it was faulty (could not start system from second card when tested as single) but the setup was as follows

core i7 920 stock
3GB RAM kit
Xfire 4870X2
corsair HX1000 PSU
one drive
12-05-2008, 12:22 AM
basco

1 Attachment(s)

first thanks for your work!(or fun)

only review about power i found here:
http://enthusiast.hardocp.com/articl...50aHVzaWFzdA==

i am still on f2 bios and as test i played with my old gtr-rams-with not much luck on low volts except crucial 12800-2x1gb till 1600mhz.

then i saw some cheep buffalo 2x2gb+1x2gb 1333 cl7 and till now i am really surprised.-i am only talking benchmark stable.

my question:did you gain some headroom on uncore or qpi with newer bioses?

my max bus speed is 210/213 but only with smallest divider on ram.
i got probs going near 4000 uncorefreq.
with 2:10 is ok till 1900/1950mhz on ram cl8.

thanks for your time in advance.
12-05-2008, 12:52 AM
basco

1 Attachment(s)

both pics are near max-mhz with 1,50v ram.
ich i/o =1,450v
ich core = 0,920v.

only diff is qpi/vtt=1st-pic-1,240v
=2nd-pic-1,320v.

could not look under heatspreader,maybe someone knows the ic´s used.-FireStix Pyro FSX1333D3G-K4G cl7.
12-06-2008, 12:37 AM
dinos22

hi guys

played with uncore past 4400MHz :shocked:

improved SuperPi as well :D

http://img392.imageshack.us/img392/7...turbococx9.png
12-06-2008, 08:06 PM
kayl

Quote:

Originally Posted by dinos22

hi guys

played with uncore past 4400MHz :shocked:

improved SuperPi as well :D

nice work dino, was last 32m run on ln2 or still on the ss cooler
12-06-2008, 08:19 PM
3oh6

very nice Dino :up:
good to see UnCORE clocks that high. i would love to join in the fun but this EVGA board is a bit of a let down. UnCORE multi is locked at 16X, and with 920/940s, i only have access to 2:8...not even 2:10 let alone higher memory ratios. clocking memory past 800MHz is all but impossible. Jake and Peter are going to hate me by the end of the weekend...because they are going to hear about it :D
12-06-2008, 11:23 PM
dinos22

Quote:

Originally Posted by kayl

nice work dino, was last 32m run on ln2 or still on the ss cooler

hi mate
SS still
LN2 is not going to impove clocks for 32M SuperPi but i will be able to probably bench vantage at max clocks as my SS cannot handle 280W load very well (around 4.4GHz max for CPU tests)

Quote:

Originally Posted by 3oh6

very nice Dino :up:
good to see UnCORE clocks that high. i would love to join in the fun but this EVGA board is a bit of a let down. UnCORE multi is locked at 16X, and with 920/940s, i only have access to 2:8...not even 2:10 let alone higher memory ratios. clocking memory past 800MHz is all but impossible. Jake and Peter are going to hate me by the end of the weekend...because they are going to hear about it :D

hi mate
evga want to have great boards so they will have to listen to feedback from great overclockers :up:........i know they will listen to what you have to say...i would take it as good advice for sure :yepp:
12-06-2008, 11:35 PM
dinos22

oh btw i tested this SS with vantage and CPU tests put out a lot of heat

it is really struggling to do even 4.4GHz

something was odd with GPU clocks...i think i forgot to set the higher clocks on second core so one was at 860 and the other at 750 it seems

regardless i got a pretty decent score for the first try

http://service.futuremark.com/result...eResultType=19
12-07-2008, 09:39 AM
JacobF

Quote:

Originally Posted by 3oh6

very nice Dino :up:
good to see UnCORE clocks that high. i would love to join in the fun but this EVGA board is a bit of a let down. UnCORE multi is locked at 16X, and with 920/940s, i only have access to 2:8...not even 2:10 let alone higher memory ratios. clocking memory past 800MHz is all but impossible. Jake and Peter are going to hate me by the end of the weekend...because they are going to hear about it :D

Uncore is adjustable in latest BIOS, can you confirm?

Also 2:8 is 1066MHz.

Also 2:10 (1333) is workin on 965 CPU, unfortunately it is not as straight forward as one would think. This is a top priority for the BIOS team so you will see a new BIOS soon that unlocks higher memory ratio's even for 920 and 940 CPU. If you want to use the 2:10 memory ratio with a 965 CPU, you need to set the uncore multi to 20x.

Also it is easy to OC past 1066MHz even with 2:8 memory ratio. 200MHz BClock would net you 1600MHz with a 2:8 memory ratio
12-07-2008, 02:07 PM
dinos22

yup for easiest way to get RAM clocks up run NB Frequency at 4x RAM frequency
12-07-2008, 02:12 PM
giorgos th.

Quote:

Originally Posted by dinos22

something was odd with GPU clocks...i think i forgot to set the higher clocks on second core so one was at 860 and the other at 750 it seems

it happens all the time M8...
try 8.11 CAT with riva 2.20....it worked fine for me with single card and CFX also..:)
12-07-2008, 03:23 PM
SAE

Quote:

Originally Posted by dinos22

...as my SS cannot handle 280W load very well (around 4.4GHz max for CPU tests)

:eek: 280W?! That's friggin' hot, huh? :D
How do you know it's @280W? Did you calculate it somehow?

Seems I just have to go with 4.2GHz stable as my phase unit can only cope with like 200W. :shakes:
12-07-2008, 11:06 PM
dinos22

Quote:

Originally Posted by SAE

:eek: 280W?! That's friggin' hot, huh? :D
How do you know it's @280W? Did you calculate it somehow?

Seems I just have to go with 4.2GHz stable as my phase unit can only cope with like 200W. :shakes:

eva2000 calculated it

http://i4memory.com/f90/team-au-giga...-thread-11924/
12-08-2008, 07:39 AM
Slovnaft

Dinos that's awesome uclk. what v QPI/VTT did you use for that?

also WHEN will TR3X3G1866C8D be available??
12-08-2008, 08:02 AM
SAE

Quote:

Originally Posted by dinos22

eva2000 calculated it

http://i4memory.com/f90/team-au-giga...-thread-11924/

But not in this thread, did he? :confused:
At least I was not able to spot it...
12-08-2008, 01:56 PM
dinos22

Quote:

Originally Posted by Slovnaft

Dinos that's awesome uclk. what v QPI/VTT did you use for that?

also WHEN will TR3X3G1866C8D be available??

1.6v QPI/VTT
availability = no idea :D

Quote:

Originally Posted by SAE

But not in this thread, did he? :confused:
At least I was not able to spot it...

yup the thread i linked is where george said its about 280W
12-08-2008, 02:03 PM
hicookie

Quote:

Originally Posted by dinos22

1.6v QPI/VTT
availability = no idea :D

yup the thread i linked is where george said its about 280W

possible you can go 1.8v :D but do not try to burin-in that 24/7
12-08-2008, 03:14 PM
dinos22

Quote:

Originally Posted by hicookie

possible you can go 1.8v :D but do not try to burin-in that 24/7

ROFL...imagine priming on those volts lol heheh
yeah no worries
i'll only test such high volts with SS or LN2 anyways and just for benching my favourite sport > 32M SuperPi :D

:up:
12-09-2008, 02:11 AM
dinos22

Quote:

Originally Posted by giorgos th.

it happens all the time M8...
try 8.11 CAT with riva 2.20....it worked fine for me with single card and CFX also..:)

that is what i was using

also i benched vista and i found that after CPU test#1 my card resets to default settings and it also resets the fan to 26% :down:
12-09-2008, 02:16 AM
giorgos th.

i from the other hand get only a core working 3D in GT4 @ 06 in the first run....
second run everything ok but i loose all the good fps in GT1&GT2.....
12-09-2008, 07:36 PM
dinos22

Quote:

Originally Posted by giorgos th.

i from the other hand get only a core working 3D in GT4 @ 06 in the first run....
second run everything ok but i loose all the good fps in GT1&GT2.....

lol ATI and their crappy drivers lol

Show 100 post(s) from this thread on one page