E8500 5.9G 3D Benchable with Biostar TP45 HP

Printable View

Show 100 post(s) from this thread on one page

06-30-2008, 07:45 PM
G H Z

Is this for real? ;)

Very impressive NewBeetle, how far can you overclock a Dell? :D :toast:
07-01-2008, 08:18 AM
Gautam

Great job NewBeetle-san!

If I might make a suggestion...see if you can try an nVidia 9800GX2. In single card it's stronger than a 3870X2 in all benchmarks.
07-01-2008, 08:23 AM
dinos22

Quote:

Originally Posted by Gautam

Great job NewBeetle-san!

If I might make a suggestion...see if you can try an nVidia 9800GX2. In single card it's stronger than a 3870X2 in all benchmarks.

my board doesn't turn on properly even with cleared cmos and there is no chance i can even OC with GX2 installed
very disappointed atm

i was testing RAM efficiency and this board is super fast

i did a 12m flat time at 3627MHz EEEEEEK :D
http://img393.imageshack.us/img393/9...63at362po5.png
07-01-2008, 01:15 PM
Fr3ak

Impressive results Mitsuaki-san ! :D :toast:

I am stuck at about 600 MHz FSB, because of my weak CPU, but I was able to run very high memory speeds with eh Tpower I45. Did you do any memory testing with your setup? With your high FSB, there is probably no need to test max mem speed using dividers, hehe :)
07-01-2008, 02:02 PM
Vivi

Awesome!!
that is sick.
i dont know what biostar is doing but it is working. thanks for the mods aswel.
07-03-2008, 03:32 AM
NewBeetle

Quote:

Originally Posted by TheKarmakazi

very nice benching as always newbeetle-san! cant wait to see your 4870's in CF!! Good luck on your next runs!

Thank you, TheKarmakazi-san. :)
I had a quick test of ASUS P5Q-E.
It works well with 3870's in CF. :up:
Therefore, the test of 4870's CF will become a little more previously. :p:

Quote:

Originally Posted by SF3D

Impressive work from you Mitsuaki-san! :D

I'm waiting your 4870 CF runs :up:

Thank you, SF3D-san. :)
But I have not got 4870s yet in Japan.... :(
Please wait my 4870 CF runs for a while. :D

Quote:

Originally Posted by dinos22

oh i see...that explains things better :up:

if you don't mind i would like to suggest that you try to boot at 600MHz FSB instead of 570
i found that when i boot at 590(haven't tried 570) my superpi is VERY slow...........but when i boot at 600 it's VERY fast :up:

strange but it works heh :)

maybe you will be the first man to go below 1m 40s :cool:
that CPU is awesome...... 5.9Ghz with 1.85v is really special :up:....special CPU and special OCer is pure nerd sex on the beach :D

Thank you so much for your advice, dinos22-san. :)
And your 32M run @ 3.6G is very fantastic! :toast:
I will challenge below 1m 40s run of SPi-8M. :D

Quote:

Originally Posted by G H Z

Is this for real? ;)

Very impressive NewBeetle, how far can you overclock a Dell? :D :toast:

Thank you always, my friend G H Z-san. :)
I love a Dell, too.
If you send it to me, I will overclock it to the moon. :D :p:

Quote:

Originally Posted by Gautam

Great job NewBeetle-san!

If I might make a suggestion...see if you can try an nVidia 9800GX2. In single card it's stronger than a 3870X2 in all benchmarks.

Thank you for your advice, Gautam-san. :)
It seems that current Biostar P45's BIOS has PCI-E compatibility problems. :(
I hope new BIOS can work well with Dual GPU system. ;)

Quote:

Originally Posted by Fr3ak

Impressive results Mitsuaki-san ! :D :toast:

I am stuck at about 600 MHz FSB, because of my weak CPU, but I was able to run very high memory speeds with eh Tpower I45. Did you do any memory testing with your setup? With your high FSB, there is probably no need to test max mem speed using dividers, hehe :)

Thank you so much, Fr3ak-san. :)
I tested MAX memory speed @ 2:3 dividers.
I can run Spi-1M @ 709.9MHz.
CPU-Z Validation is 724.9MHz.
Biostar P45 mobo is very high memory speed! :up:

Quote:

Originally Posted by Vivi2

Awesome!!
that is sick.
i dont know what biostar is doing but it is working. thanks for the mods aswel.

Thank you, Vivi2-san. :)
I strongly recommend this mobo. :D

DEWA DEWA
NewBeetle
07-03-2008, 03:39 AM
dinos22

your notes helped me gain extra FSB thank you
with 570 boot and pmem tweaks it's very fast but i get to run at higher FSB than 600boot :up::up::up:

below 1m40s will be amazing
i hope you will also challenge 32M W.R. soon :cool: but maybe that CPU will also go to 6GHz :yepp:
07-03-2008, 05:08 AM
NewBeetle

Quote:

Originally Posted by dinos22

your notes helped me gain extra FSB thank you
with 570 boot and pmem tweaks it's very fast but i get to run at higher FSB than 600boot :up::up::up:

below 1m40s will be amazing
i hope you will also challenge 32M W.R. soon :cool: but maybe that CPU will also go to 6GHz :yepp:

My E8500 has the possiblity 32M benching @ 6G. :rolleyes:
But pmem tweaks is very difficult for me. :p:
I will need much time to take new WR. :D
07-03-2008, 05:26 AM
Oliver

Mitsuaki Tanaka-tan u really have a e85 gem...
07-03-2008, 08:54 AM
c1rcu1tburn3r

Great work NB-san, i'll wait some wr from you with p45 chipset :clap:
07-03-2008, 05:39 PM
dinos22

Quote:

Originally Posted by NewBeetle

My E8500 has the possiblity 32M benching @ 6G. :rolleyes:
But pmem tweaks is very difficult for me. :p:
I will need much time to take new WR. :D

wow dude i can't wait to see that :D
this board is around efficiency of DDR3 boards pretty much....at least all the W.R. holders

the fact you are benchmarking and at such speed we will see first sub 8m time for sure :cool::D:up:

go go go NB-san :D
07-04-2008, 02:40 AM
gundamit

Great stuff as usual! Nice to see the 2 8x PCI-E lanes aren't hurting.

I'm also glad I'm not the only one seeing "Disabled (Crossfire Available)" in GPU-Z despite the fact Crossfire is obviously working. I'm seeing the same thing with my 4850s. Not a big deal but kind of irritating.
07-04-2008, 10:40 PM
NewBeetle

Quote:

Originally Posted by Oliver

Mitsuaki Tanaka-tan u really have a e85 gem...

Thank you always, Oliver-san. :)
Today, I tested "P965 Strap Tweker" under LN2 Pi Bench.
I take new WR to me (maybe)..... :D

Quote:

Originally Posted by c1rcu1tburn3r

Great work NB-san, i'll wait some wr from you with p45 chipset :clap:

Thank you, c1rcu1tburn3r-san. :)
Perhaps, I take new modPi 8M WR by this E8500 and mobo. :D

Quote:

Originally Posted by dinos22

wow dude i can't wait to see that :D
this board is around efficiency of DDR3 boards pretty much....at least all the W.R. holders

the fact you are benchmarking and at such speed we will see first sub 8m time for sure :cool::D:up:

go go go NB-san :D

Thank you so much for your advice, dinos22-san. :)
modPi 8M is OK. :up:
But 32M is N.G. :(
My Team memory is almost breaking because it was overworked too much. :D

Quote:

Originally Posted by gundamit

Great stuff as usual! Nice to see the 2 8x PCI-E lanes aren't hurting.

I'm also glad I'm not the only one seeing "Disabled (Crossfire Available)" in GPU-Z despite the fact Crossfire is obviously working. I'm seeing the same thing with my 4850s. Not a big deal but kind of irritating.

Thank you, gundamit-san. :)
CPU-Z shows some wrong informations. :(
But I don't mind..... :D

DEWA DEWA
NewBeetle
07-19-2008, 09:33 PM
NewBeetle

Quote:

Originally Posted by FUGGER

nioce push Newbeetle-san, love to see some 3D at that speed. :up:

Quote:

Originally Posted by NewBeetle

Thank you so much, FUGGER-san. :)
I will show you some 3D at this speed in a few days. :D :up:

I'm very sorry, FUGGER-san. :(
I cannot show you any 3D at that speed.....

Today my system has some troubles.
I can run only 5.85G 3D Bench....
Next I will challenge over 6GHz 3D bench. :D

3DMARK05 : 37351 CPU/GPU/Mem/PCI-E : 5762.9MHz/775MHz/1055MHz/100MHz
http://homepage2.nifty.com/NewBeetle/05_37351_5.76G.png

3DMARK05 : 37620 CPU/GPU/Mem/PCI-E : 5849.2MHz/775MHz/1055MHz/100MHz
http://homepage2.nifty.com/NewBeetle/05_37620_5.85G.png

Setup
http://homepage2.nifty.com/NewBeetle...+E8500_LN2.jpg
07-19-2008, 10:13 PM
harleybro

NewBeetle you are a master! I always look forward to seeing posts and results from you. :yepp:
07-20-2008, 09:56 AM
DMH

Great scores,congrat's
07-20-2008, 06:18 PM
NewBeetle

Quote:

Originally Posted by harleybro

NewBeetle you are a master! I always look forward to seeing posts and results from you. :yepp:

Thank you, harleybro-san. :)
Please look at my new Thread. :D

Quote:

Originally Posted by DMH

Great scores,congrat's

Thank you always, DMH-san. :)
At last I can join the 6G 3D bench Club. :up:

DEWA DEWA
NewBeetle
07-21-2008, 10:01 PM
pH(x)

Good work NewBeetle-san :up:

I like your CPU pot retention mechanism :shocked:
07-22-2008, 04:26 PM
NewBeetle

Quote:

Originally Posted by pH(x)

Good work NewBeetle-san :up:

I like your CPU pot retention mechanism :shocked:

Thank you, pH(x)-san. :)
The CPU pot retention mechanism is designed by Vigor who is a legendary Japanese OC'er. :up:

DEWA DEWA

Show 100 post(s) from this thread on one page