Quadzilla Qx6850@ln2

Printable View

Show 100 post(s) from this thread on one page

08-14-2007, 02:39 PM
k|ngp|n

Quote:

Originally Posted by BenchZowner

And crank up the voltage ( they handle 2.25-2.35V just like D9GMH handles 2.65V for benching ), 1800 7-6-5-18 1T Command Rate should be possible with 2.25V ;)

These modules can run 06 at 940-950mhz 7-6-5-15-1T 2.25v
Not all dividers/fsb combos are working with the high ln2 speeds.
With conroe at 535-540x10, the memory can run exactly where it needs too. If I can get this quad clocking up to 530 I'm in :D
08-14-2007, 03:18 PM
Stapler

:shocked:
08-14-2007, 07:11 PM
BenchZowner

Quote:

Originally Posted by k|ngp|n

These modules can run 06 at 940-950mhz 7-6-5-15-1T 2.25v
Not all dividers/fsb combos are working with the high ln2 speeds.
With conroe at 535-540x10, the memory can run exactly where it needs too. If I can get this quad clocking up to 530 I'm in :D

Hopefully it will get there eventually ;)
Did you try with a tad relaxed "performance level" ? Sometimes seems to help some dividers to clock a tad higher ( didn't thoroughly tested it ) [ but then again, we might have lower performance if the gains from the clocks ain't covering up for the internal chipset latency rise ]

Get well soon and give this CPU + VGAs a proper...OC harassment man :yepp:
08-14-2007, 08:07 PM
krullet

thats a sweet 01 result,

cant get over how good theese quads OC, its sooo nice
08-15-2007, 12:12 PM
k|ngp|n

Quote:

Originally Posted by BenchZowner

Hopefully it will get there eventually ;)
Did you try with a tad relaxed "performance level" ? Sometimes seems to help some dividers to clock a tad higher ( didn't thoroughly tested it ) [ but then again, we might have lower performance if the gains from the clocks ain't covering up for the internal chipset latency rise ]

Get well soon and give this CPU + VGAs a proper...OC harassment man :yepp:

Hey thanx and good call on the PL's, actually did some of that today. Now just need to test on ln2.

Took out my 3dmark2006 single 8800ULTRA WR by 40 points at 5250mhz on ddr3 lol.
Using about 40mhz less core clock and 30mhz less mem clock on such a gpu bound benchmark(single) too. Could see scores getting near 22k with more gpu power. This one was about all I could handle today :ROTF: :

http://www.overclockingpin.com/21k%2006%20quad.jpg
08-16-2007, 01:00 AM
G H Z

Can I come over and plug a card in for a few minutes :D
08-17-2007, 01:21 PM
blossa

Quote:

Originally Posted by k|ngp|n

Hey thanx and good call on the PL's, actually did some of that today. Now just need to test on ln2.

Took out my 3dmark2006 single 8800ULTRA WR by 40 points at 5250mhz on ddr3 lol.
Using about 40mhz less core clock and 30mhz less mem clock on such a gpu bound benchmark(single) too. Could see scores getting near 22k with more gpu power. This one was about all I could handle today :ROTF: :

http://www.overclockingpin.com/21k%2006%20quad.jpg

Well, that was not that bad, I think you were doing 'ok'! :D

Any issues with cold on the qx6850? I think I read -112 degrees somewhere... Does it work with even lower temps aswell?
08-17-2007, 02:04 PM
k|ngp|n

Quote:

Originally Posted by LardArse

Quadzlliy! Thats a 5.3 x 4 we're seein....
even if u can only do 5.2 on an sli board, you'd reap hell of a score

Done deal Sham..."hell is coming to breakfast" :D
24k with default clocked cards, now just to get both cards clocking where they need to be on ln2 and it should be SICK.
http://www.overclockingpin.com/5209%20striker.jpg

Quote:

Originally Posted by blossa

Well, that was not that bad, I think you were doing 'ok'! :D
Any issues with cold on the qx6850? I think I read -112 degrees somewhere... Does it work with even lower temps aswell?

Depends on the board really. This one doesn't tolerate cold like my qx6700.
08-17-2007, 02:30 PM
Gautam

:eek2:
08-17-2007, 02:36 PM
GLENBOY

re ddr3

whats your take on ddr3 compared to hi grade ddr2 kingpin looks pretty awesome to me
08-17-2007, 03:08 PM
dpa

24k on stock cards.. hihi :D You will take them all! Good luck kingpin!
08-17-2007, 03:11 PM
Stapler

What a monster. These chips are disgusting, even on dry ice I've seen 4.9ghz '06.
08-20-2007, 09:22 AM
k|ngp|n

:)

:rocker:

http://www.overclockingpin.com/26453%202.jpg

ORB COMPARE
08-20-2007, 09:26 AM
Bluebeard

:clap:
08-20-2007, 09:30 AM
BeardyMan

LOL that smilie, it fits lol :ROTF:

great job Vince:clap:

edit*
after watching that pic again, it seems you have the road to 27K stil open...
5.3ghz quad and +1000 on the core ^^
08-20-2007, 09:33 AM
gillll

:clap: thank you k|ngp|n
08-20-2007, 09:35 AM
Gautam

Awesome job as always my friend and good to know your recovery is coming along well. I'm sure this really brightened up your day. :)
08-20-2007, 09:42 AM
massman

Good job.
08-20-2007, 09:44 AM
Stapler

Wow you didn't just break the WR, you smashed it. Next question is whether or not 27k can go down.

Hopefully we'll see some response from the red team tommorow, but will it top 26.4k?
08-20-2007, 10:51 AM
krullet

the score is soo sweet,

nicely done¨kp
08-20-2007, 11:29 AM
Daveb2012

that thing is rediculous
08-20-2007, 12:08 PM
DMH

I think that score is a WR:D Hipro did "only" 26008
08-20-2007, 12:11 PM
Florent

Good job :up:
08-20-2007, 12:26 PM
metro.cl

Awsome KP, but you covered GPU clocks :P
08-20-2007, 12:30 PM
Kinc

Awsome to see you back Vince! :D Scary cpu for sure :)

I cant get any drivers validated on the ORB at the moment so I stoped benching when I noticed. Have e-mailed Nick about it. After a few modification to Blitz I managed to get it running ok. http://service.futuremark.com/compare?3dm06=2801368

Show 100 post(s) from this thread on one page