EP45-UD3P

Printable View

Show 100 post(s) from this thread on one page

09-11-2010, 05:56 PM
andressergio

Quote:

Originally Posted by OC Nub

Dont worry Sergio, you would only be a ":banana::banana::banana::banana::banana:" if you ran your i7 on LN2. I know you will find max oc using a 24/7 cooling solution.

You have done a lot for this thread along with quite a few others, and have always been there to help people when they needed it. This has been a great thread with a lot of good people posting that have been more than willing to help, something I havent seen in many other threads.

well said mate :up:
09-11-2010, 06:24 PM
l0ud_sil3nc3

Quote:

Originally Posted by OC Nub

Dont worry Sergio, you would only be a ":banana::banana::banana::banana::banana:" if you ran your i7 on LN2. I know you will find max oc using a 24/7 cooling solution.

You have done a lot for this thread along with quite a few others, and have always been there to help people when they needed it. This has been a great thread with a lot of good people posting that have been more than willing to help, something I havent seen in many other threads.

this is without a doubt one of the best threads on xs:up:
09-11-2010, 07:50 PM
Marke

setting for a Q8400 on a EP45-UD3P

Can someone post a Bios Temp-let for a Q8400 on a EP45-UD3P Rev.1.0 that could help get me at 4.0mhz I'm running 4 1gig sticks of Micron 555-12 rated at 667 Dram Volt 18000 Cooler Master hyper 212
09-11-2010, 08:09 PM
andressergio

Quote:

Originally Posted by l0ud_sil3nc3

this is without a doubt one of the best threads on xs:up:

+1 for that :up:
09-11-2010, 08:10 PM
NoGuru

Sergio is one of the biggest assets to this thread. You may be gone, but not forgotten. R.I.P. my friend.
09-11-2010, 08:43 PM
Gaul

Quote:

Originally Posted by gugle

very good, :clap:
which values in bios ?

thanx mate, here

1000
1000
50
100

everything auto, except :

vcpu = 1.2875
vtt = 1.34
vnb = 1.50
v pll = 1.50
PL = 9
09-11-2010, 08:46 PM
the_real_7

Quote:

Originally Posted by NoGuru

Sergio is one of the biggest assets to this thread. You may be gone, but not forgotten. R.I.P. my friend.

nah our freind sergio wont rest till the job done
09-12-2010, 06:27 AM
andressergio

Quote:

Originally Posted by NoGuru

Sergio is one of the biggest assets to this thread. You may be gone, but not forgotten. R.I.P. my friend.

thanks my friend :up: but i will keep on helping ppl to get nice clockies :D
09-12-2010, 06:44 AM
andressergio

Quote:

Originally Posted by Marke

Can someone post a Bios Temp-let for a Q8400 on a EP45-UD3P Rev.1.0 that could help get me at 4.0mhz I'm running 4 1gig sticks of Micron 555-12 rated at 667 Dram Volt 18000 Cooler Master hyper 212

i dont have a bios template mate but i can give you some tips...btw you know you have a killer mobo ? rev 1.0 can reach amazing clocks

skews
900/900/0/50

set vtt to 1.2 and cpu ref to .785 and mch ref to .80 then up vtt to the value you want letting the other settings change

MCH volts if you are running 4GB set to 1,36

post your actual settings and i will help you better ok ?

cheers :toast:
Sergio
09-12-2010, 06:44 AM
andressergio

Quote:

Originally Posted by the_real_7

nah our freind sergio wont rest till the job done

will never rest :up:
09-12-2010, 11:40 AM
ciloteille

Hi I have this set up, just purchased recently, curious about a few things, ill post specs first, then what i've noticed, then my question(s)... Thanks
E8400 E0 4.264 (533 Fsb x 8) Keeps my 1066 ram times. 1.350v (could go lower?) Runs stable in prime 1Hr, and everything works ok!
EP45-UD3R Motherboard
OCZ Reaper 2x2Gb 1066
OCZ Vertex 30Gb
XFX 5670 (512Mb Non Crossfire ability)
BFG 800+ Watt 4x12v 18A? Rails?

What I've noticed, at 3.6Ghz I could under-volt fine, and run SUPER PI pretty quick, at 4Ghz Even faster! (10-12 Seconds on 1m)

Now.. 4.264Ghz with 1066 ram, lowered timings even, benches higher, but!!!...
With 1Minute + on 1m test? That's getting stupid, how did I go down on PI calculations vs my 3.6Ghz? And such a LARGE variation as-well!

I can Photobucket my Bios screens ....
http://i998.photobucket.com/albums/a...r/IMAG0182.jpg
http://i998.photobucket.com/albums/a...r/IMAG0181.jpg
http://i998.photobucket.com/albums/a...r/IMAG0180.jpg
http://i998.photobucket.com/albums/a...r/IMAG0179.jpg
http://i998.photobucket.com/albums/a...r/IMAG0178.jpg
09-12-2010, 12:01 PM
Marke

2 Attachment(s)

Thanks for your reply Here's my settings Time to play again anyone want to chime in with some recommended setting to see how far we can bump this up

MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster .............: Auto
CPU Clock Ratio .....................: 8x
Fine CPU Clock Ratio.................:
CPU Frequency .......................: 3.20GHz (400x9)

Clock Chip Control
Standard Clock Control
CPU Host Clock Control...............: Enabled
CPU Host Frequency (Mhz) ............: 400
PCI Express Frequency (Mhz) .........: Auto
C.I.A.2..............................: Disabled

DRAM Performance Control
Performance Enhance..................: Turbo
Extreme Memory Profile (X.M.P.)......: Don't have this option in my bios Why ?
(G)MCH Frequency Latch...............: Auto
System Memory Multiplier ............: 2.00B
Memory Frequency (Mhz) .........: 677- 800
DRAM Timing Selectable ..............: Manual

Standard Timing Control
CAS Latency Time.....................: 5
tRCD ................................: 5
tRP..................................: 5
tRAS.................................: 15

Advanced Timing Control
tRRD.................................: Auto
tWTR.................................: Auto
tWR..................................: Auto
tRFC.................................: Auto
tRTP.................................: Auto
Command Rate (CMD) ..................: Auto

Channel A
Static tRead Value...................:
Channel B
Static tRead Value...................:

Motherboard Voltage Control
CPU
Load Line Calibration (LLC) .........: Enable
CPU Vcore ................... 1.28750V 1.29375v
CPU Termination.....1.200V*..........: Normal
CPU PLL.............1.500V*..........: Normal
CPU Referen.........0.760V*..........: Normal

MCH/ICH
MCH Core............1.100V...........: Normal
MCH Reference.......0.800V...........: Normal
MCH/DRAM Ref........0.900V...........: Normal
ICH I/O.............1.500V...........: Normal
ICH Core............1.100V...........: Normal

DRAM
DRAM Voltage .........1.800V.........: 1.9000v
DRAM Termination .....0.900V.........: Normal
Channel A Reference ..0.900V.........: Normal
Channel B Reference ..0.900V.........: Normal

Advanced BIOS Features
No-Execute memory Protect.......................: Disabled
CPU Enhance Halt (CIE)..........................: Disabled
C2/C2E State Support............................: Disabled
CPU Thermal Monitor.............................: Disabled
CPU EIST Function...............................: Disabled

Quote:

Originally Posted by andressergio

i dont have a bios template mate but i can give you some tips...btw you know you have a killer mobo ? rev 1.0 can reach amazing clocks

skews
900/900/0/50

set vtt to 1.2 and cpu ref to .785 and mch ref to .80 then up vtt to the value you want letting the other settings change

MCH volts if you are running 4GB set to 1,36

post your actual settings and i will help you better ok ?

cheers :toast:
Sergio
09-13-2010, 10:36 AM
bluestang

@Sergio...Congrats and thanks for all the knowledge :up:

OC nub and l0ud_sil3nc3...Some amazing giys you are there :clap:

I'm dying to go to an i7 860 on a GA-P55, but I'm just to damn lazy to have to reinstall all my programs I use.
I wish I knew if some has used Sysprep and switch from P45 to P55 with success on XP SP3.
09-13-2010, 11:19 AM
radaja

Quote:

Originally Posted by Marke

Extreme Memory Profile (X.M.P.)......: Don't have this option in my bios Why ?

your memory doesnt have programmed SPD's with XMP profiles
09-13-2010, 02:09 PM
andressergio

Quote:

Originally Posted by bluestang

@Sergio...Congrats and thanks for all the knowledge :up:

OC nub and l0ud_sil3nc3...Some amazing giys you are there :clap:

I'm dying to go to an i7 860 on a GA-P55, but I'm just to damn lazy to have to reinstall all my programs I use.
I wish I knew if some has used Sysprep and switch from P45 to P55 with success on XP SP3.

i learnt all from this forum and met really good friends, glad to help mate :up:
09-13-2010, 04:31 PM
andressergio

hey mate to show us your template just put as i did selecting # (Wrap CODE...) from the message menu

Code:

MB Intelligent Tweaker(M.I.T.) Robust Graphics Booster .............: Auto CPU Clock Ratio .....................: 8x Fine CPU Clock Ratio.................: CPU Frequency .......................: 3.20GHz (400x9) Clock Chip Control Standard Clock Control CPU Host Clock Control...............: Enabled CPU Host Frequency (Mhz) ............: 400 PCI Express Frequency (Mhz) .........: Auto C.I.A.2..............................: Disabled DRAM Performance Control Performance Enhance..................: Turbo Extreme Memory Profile (X.M.P.)......: Don't have this option in my bios Why ? (G)MCH Frequency Latch...............: Auto System Memory Multiplier ............: 2.00B Memory Frequency (Mhz) .........: 677- 800 DRAM Timing Selectable ..............: Manual Standard Timing Control CAS Latency Time.....................: 5 tRCD ................................: 5 tRP..................................: 5 tRAS.................................: 15 Advanced Timing Control tRRD.................................: Auto tWTR.................................: Auto tWR..................................: Auto tRFC.................................: Auto tRTP.................................: Auto Command Rate (CMD) ..................: Auto Channel A Static tRead Value...................: Channel B Static tRead Value...................: Motherboard Voltage Control CPU Load Line Calibration (LLC) .........: Enable CPU Vcore ................... 1.28750V 1.29375v CPU Termination.....1.200V*..........: Normal CPU PLL.............1.500V*..........: Normal CPU Referen.........0.760V*..........: Normal MCH/ICH MCH Core............1.100V...........: Normal MCH Reference.......0.800V...........: Normal MCH/DRAM Ref........0.900V...........: Normal ICH I/O.............1.500V...........: Normal ICH Core............1.100V...........: Normal DRAM DRAM Voltage .........1.800V.........: 1.9000v DRAM Termination .....0.900V.........: Normal Channel A Reference ..0.900V.........: Normal Channel B Reference ..0.900V.........: Normal Advanced BIOS Features No-Execute memory Protect.......................: Disabled CPU Enhance Halt (CIE)..........................: Disabled C2/C2E State Support............................: Disabled CPU Thermal Monitor.............................: Disabled CPU EIST Function...............................: Disabled

u need to setup things as i told you

put 1,2VTT and .785 on CPU REF and .80 on MCH REF then UP VTT leaving the values change auto to 1,3VTT

Skews set 900/900/0/50

MCH set to 1,3+ at least
PLL 1,5

check that you have 400x8 not 400x9

also radaja is right you dont have memory with XMP (xtreme mem profile) just put that on AUTO or disable it

cheers :toast:
Sergio
09-13-2010, 07:39 PM
Marke

I don't want to sound like a retarded noob but can someone clarify what those above setting mean exactly

VTT = CPU Termination ? yes ? coz theres is no VTT in the ud3p bios

Then your saying up VTT to 1.3 leaving the other values to change automatic ?
not really clear to me is that what your saying ? sorry

then MCH set to 1,3+ at least which MCH ? core ,reference , or dram ref ?

Skews set 900/900/0/50 what exactly are the Skews ?

Can someone straighten me out so i can try these setting please
09-13-2010, 08:36 PM
radaja

quick guide to set cpu/mch references using 1.20v vtt in bios

http://i46.tinypic.com/2444b3c.jpg

heres an easy cheatsheet for the actual cpu/mch references
values in bios for different vtt values:helps when assisting
others who are new to the board by being able to give exact
reference values to set for most vtt voltages.

top row represents what easytune6 shows

highlighted green is vtt voltage

highlighted red is cpu reference

highlighted blue is mch reference

EXAMPLE:using vtt voltage of 1.32v

setting the cpu ref to 0.861v in bios(shown in red).
ET6 will show it as 0.785v(1 notch above normal)

setting the mch ref to 0.916v in bios(shown in blue).
ET6 will show it as 0.840v(2 notches above normal)

Code:

E-T-6 0.730 / 0.745 / 0.760 \ 0.785 \ 0.800 vtt 1.20 0.730 / 0.745 / 0.760 \ 0.785 \ 0.800 vtt 1.22 0.742 / 0.757 / 0.772 \ 0.797 \ 0.812 vtt 1.24 0.755 / 0.770 / 0.785 \ 0.810 \ 0.825 CPU reference value in bios vtt 1.26 0.768 / 0.783 / 0.798 \ 0.823 \ 0.838 vtt 1.28 0.780 / 0.795 / 0.810 \ 0.838 \ 0.850 vtt 1.30 0.793 / 0.808 / 0.823 \ 0.848 \ 0.863 vtt 1.32 0.806 / 0.821 / 0.836 \ 0.861 \ 0.876 vtt 1.34 0.818 / 0.833 / 0.848 \ 0.873 \ 0.888 vtt 1.36 0.831 / 0.846 / 0.861 \ 0.886 \ 0.901 vtt 1.38 0.844 / 0.859 / 0.874 \ 0.899 \ 0.914 vtt 1.40 0.856 / 0.871 / 0.886 \ 0.911 \ 0.926 vtt 1.42 0.869 / 0.884 / 0.899 \ 0.924 \ 0.939 vtt 1.44 0.882 / 0.897 / 0.912 \ 0.937 \ 0.952 vtt 1.20 0.720 / 0.740 / 0.760 \ 0.800 \ 0.840 vtt 1.22 0.732 / 0.752 / 0.772 \ 0.812 \ 0.852 vtt 1.24 0.745 / 0.765 / 0.785 \ 0.825 \ 0.865 MCH reference value in bios vtt 1.26 0.758 / 0.778 / 0.798 \ 0.838 \ 0.878 vtt 1.28 0.770 / 0.790 / 0.810 \ 0.850 \ 0.890 vtt 1.30 0.783 / 0.803 / 0.823 \ 0.863 \ 0.903 vtt 1.32 0.796 / 0.816 / 0.836 \ 0.876 \ 0.916 vtt 1.34 0.808 / 0.828 / 0.848 \ 0.888 \ 0.928 vtt 1.36 0.821 / 0.841 / 0.861 \ 0.901 \ 0.941 vtt 1.38 0.834 / 0.854 / 0.874 \ 0.914 \ 0.954 vtt 1.40 0.846 / 0.866 / 0.886 \ 0.926 \ 0.966 vtt 1.42 0.859 / 0.879 / 0.899 \ 0.939 \ 0.979 vtt 1.44 0.872 / 0.892 / 0.912 \ 0.952 \ 0.992
09-14-2010, 05:01 AM
bluestang

In case anyone else is looking for a Q9550... MicroCenter has some in stock at the Fairfax, Twin Cities, and Detroit stores.

To bad I live in Ohio:(
09-14-2010, 05:08 AM
mistargill

just bought this board from radaja at OCN. I would like to prepare early :). Could anyone share their settings for q9650?
Will I need to get this ram? http://www.newegg.com/Product/Produc...82E16820231271

I currently use http://www.newegg.com/Product/Produc...82E16820146785
09-14-2010, 05:46 AM
andressergio

Quote:

Originally Posted by mistargill

just bought this board from radaja at OCN. I would like to prepare early :). Could anyone share their settings for q9650?
Will I need to get this ram? http://www.newegg.com/Product/Produc...82E16820231271

I currently use http://www.newegg.com/Product/Produc...82E16820146785

you have a lot of settings posted in this thread mate scroll and take your time you will have fun

i like that mem, but i think better go por the PIS 1200
09-14-2010, 05:47 AM
andressergio

Quote:

Originally Posted by bluestang

In case anyone else is looking for a Q9550... MicroCenter has some in stock at the Fairfax, Twin Cities, and Detroit stores.

To bad I live in Ohio:(

what you need bluestang ?
09-14-2010, 05:51 AM
andressergio

Quote:

Originally Posted by Marke

I don't want to sound like a retarded noob but can someone clarify what those above setting mean exactly

no need to put those bad attributes on you mate we where all noobs at the begginings...

VTT = CPU Termination ? yes ? coz theres is no VTT in the ud3p bios

* VTT = CPU TERMINATION correct

Then your saying up VTT to 1.3 leaving the other values to change automatic ?
not really clear to me is that what your saying ? sorry

* you go to bios and set manually VTT to 1.2 and set CPU REF on 0.785 and MCH ref on 0.80 then you just move VTT to your desired value lets say 1.3 and you will see the values of REFS you put change auto...leave them

then MCH set to 1,3+ at least which MCH ? core ,reference , or dram ref ?

* MCH volts sorry yes to 1.3 and will need more till 1.42 depending on your amount of ram and tight timmings and FSB

Skews set 900/900/0/50 what exactly are the Skews ?

* you can find them on ADVANCED CLOCK CONTROL it will help a lot with OC

cheers
Sergio
09-14-2010, 06:09 AM
bluestang

Quote:

Originally Posted by andressergio

what you need bluestang ?

a Q9550 for $150 :)
09-14-2010, 07:13 AM
andressergio

Quote:

Originally Posted by bluestang

a Q9550 for $150 :)

you can grab a 9650 instead i would

Show 100 post(s) from this thread on one page

** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P

Official Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P