Microcenter has a new batch now the 3232A610, I saw it when I was picking up the Auria 27" IPS 2560x1440 monitor the other day.
Printable View
Microcenter has a new batch now the 3232A610, I saw it when I was picking up the Auria 27" IPS 2560x1440 monitor the other day.
That is a interesting batch number, may have to look into that.
Got a few today.Quote:
Originally Posted by LagunaX
All did 2800+ imc, but 1.4V+ 5Ghz 4C/8T h20 on MVE. A little less on Asrock board.
Newer batches seem to have better IMC than first ones,but worse cores...
I've ordered a 3224B106 anyone test it out yet?
It looks mine CPU have a poor IMC, trying aything, no more than 2400Mhz on memory.Quote:
Originally Posted by DjLeco
But looks ok for 5000Mhz 4C/8T for Spi 32Mb.
http://s19.postimage.org/3ny8if95b/Done.jpg
That is strange time in sp32 bro...you have 1100 Ram frecuencies with tight timings and 5.0 GhzQuote:
Originally Posted by DjLeco
look my chip and timing 1200 MHz (1:12) @ 10-12-11-31
http://www.firegoon.com/u/wpq4fp.jpg
http://valid.canardpc.com/show_oc.php?id=2663928
From my experience on two motheboards including Gene V with IB cpu, IMC has a drop in performance with CAS7 above 2000Mhz.
I mean, i scored better with 8-10-8 than with 7-10-7 and it's a big hit , 6-7s or more. At 5ghz.
^ typical PSC bug
TWCL<=CL
on Asus it defaults TWCL to 8 so unless you run TWCL at 7 no point in running CL at 7 better to leave it at 8 & 8.
^ typical PSC bug
TWCL<=CL
on Asus it defaults TWCL to 8 so unless you run TWCL at 7 no point in running CL at 7 better to leave it at 8 & 8.
Intel i5-3570k SROPM 4.7GHz @ 1.185V (BIOS)
Noctua NH-C14
Gigabye Z77X-UD3H
Patriot Viper Extreme 8Gb 2133MHz 10-11-11-28 1T 1.55V
Gigabyte HD 7950 1135/5500MHz @ 1.25V
Intel 520 240GB
Asus VG236HE 120Hz
NZXT Lexa
http://i.imgur.com/YATKVEu.jpg
I am also Prime stable at 4.8GHz but it requires 1.245V and the temps are about 10c higher. Should I just keep it at 4.7GHz, or would you guys run it at 4.8? Mind you when I play BF3 or other games the temps are in low to mid 60s at 4.7 and high 60s to low 70s at 4.8GHz @ 1.245V. From what I have seen in these forums this is a pretty decent chip and if I had a better case and maybe a H100\110 I could potentially go even higher.
Temps are fine for 4.8ghz, you'll have a Haswell in a year or two anyways.
nice one
Anyone test any D batches yet?
Just received a 3228D116 testing to follow.
http://i864.photobucket.com/albums/a...ps92701cce.jpg
http://i864.photobucket.com/albums/a...psb843dbc3.jpg
http://i864.photobucket.com/albums/a...ps7fd6a072.jpg
3237B786
4.7 stable 1.325v (testing for less) 4.5 stable 1.225V.
Better cooling on the way.
I have not seen a D batch as of yet, now I am curious as well.Quote:
Originally Posted by l0ud_sil3nc3
Here is the 4.8GHz at 1.245V Prime SS.
http://i.imgur.com/jV17JAU.jpg?1
3243B670 anyone seen that batch before?
Quote:
Originally Posted by tranceaddict
Solid chip. I assume you didn't remove the IHS and replace the TIM? Either way, you are stable at 4.8 with 1.24v so temps in Prime are irrelevant and are safe either way.
I have the worst 3570K in history though, built 3 of the same rig (2 for friends, 1 for me) and mine takes 1.4v for 4.6GHz and IMC is no good past 2050MHz :lol:
No, I did not de-lid the chip. In gaming the temps do not go over 70C, and that is the highest workload the chip sees day to day. Sorry to hear about your 3570K, that's a really high voltage for 4.6GHz. At that same frequency I was Prime stable at only 1.145V.Quote:
Originally Posted by tool_462
3229A792
Not good CPU ...awesome IMC!...Not delidded yet.
batch #: 3238B560
5ghz 32M 1.304 4c 4t
vccio 1.14
vccsa 1.10
http://i.imgur.com/FqgaB2q.png
the IMC on this one is the jack of all trades, 2600c8 with tight timings, and it can still do 3066 32M in dual channel.
Real nice chip there, certainly one of the better IMCs I have seen.
Hey guys when I look at CPU-Z it shows my voltage as 1.248. I have it set at 1.35 in the bios. Is this normal or am I missing a setting? Also on load with P95 it drops down like 1.2?