Thanks buddy :up: hopping more ppl can join and help its a very nice mobo, yesterday it was the first time i got a reboot loop that coudlnt recover lol i tried to boot them at XPS profile lmao :rofl: 2000 CL6 had to put CMOS jumper jaaaaa but this is the first time after many OC's and 2 sets of RAMQuote:
Originally Posted by the_real_7
Cheers :up:
Sergio
I see you've got GRID on your desktop Andre' I'm having lots of fun with that in full 1080p at the moment - my 5770 plays it very nicely on full settings. Very nice work with the memory too, let's see those timings tightened! :D
Quote:
Originally Posted by In-Fluence
thanks mate
yeah i have GRID, DIRT2 love them, i also have NFS SHIFT but could never made it not stutter...i read many ppl having this issue...inside car wont do it so i play like that :)
yes i will tight them for sure lets see how it goes :up:
Thanks mateQuote:
Originally Posted by l0ud_sil3nc3
Well i dont have good news pc bsod today and it was stable yesterday...its getting kinda random at 2000 mem 1T...and for the low volts i dunno its weird maybe i need to tweak some references skews or some volts...
Any help will be appreciated, it would be nice seeing other ppl trying :up:
Cheers
Sergio
well about that. . . I just sold my X3380 and my EP45T USB3P. I know its crazy but I think I am going to take a break from 775 for a while and then try to find a nice VID X3380. I am glad that the chip went on to somebody who is going to (ab)use it. . .
enjoy it steve:up:
I am going to focus on my X5660 and my golden W3540 with a new X58A UD7 that I have coming.
Andressergio I can tell you for sure that the USB3P does not seem to clock memory high and have the ability to maintain stability as well as the UD3P.
i dont agree with you in that mate not at all, you had a normal vid X3380 experience but look at mine on the USB3P with mem that are 1600 CL7 2x2 ECO Gskills, this was done at 23C ambient closed room.Quote:
Originally Posted by l0ud_sil3nc3
http://img204.imageshack.us/img204/7...9turb0linx.png
problem is with 2000 1T wich is what im investiganting, can be a bios issue i PM stasio, remeber the UD3P rev 1.0 has 10 stable BIOS...this one just 1 and 1 on beta...
USB3P rev 1.0 i can say that is stable as the UD3P rev 1.0 and with less issues like the reboots loops as on the UD3P, i just takes more time with DDR3 :up:
Luck on your new toys
Sergio
andressergio,hope you get it figured out,as i cant wait to see you
run them at their rated specs of ddr3-2000 pc16000 6-9-6-24.but it does
look like they are rated at 2t for those speeds according to newegg?
is this correct?
When I am saying higher memory speeds i am talking about DDR3 2000 + speeds. And don't worry I am going to find a low VID X3380, its on my list of things to hunt down. As for your overclock, its simply stunning, 1.376 actual volts for IBT stable is incredible, I needed 1.44 actual for 4.4 on air last night, but it was still very cool.Quote:
Originally Posted by andressergio
I will find a low VID X3380:mad:
It will be interesting to see how that chip likes:surf: -40c and lots of :explode2:Vcore....
:scope::bravo:mahaahahahmaha:hammer::shock2: :explode:
yes i know the pain i just go for safe now and not random to get batches i can afford getting a bad chip i live in South America so i got only 1 shotQuote:
Originally Posted by l0ud_sil3nc3
i know you will mate :up: wasnt a shot for you is to demostrate that this mobo still rocks
now look at this i just did for you to see
4500 Mhz / 1600 6-9-6-24 room temp 23,5C
http://img31.imageshack.us/img31/945...cr2linxpas.png
Cheers :up:
Sergio
lol how are you mate would be awesome in cold water :up:Quote:
Originally Posted by systemviper
hey radaja how are you mate ;)Quote:
Originally Posted by radaja
dunno i just put 2 in BIOS and comes out 1 :rofl: so i think some bios is messing around i talked to stasio let's see
for now i changed skews 900/900/0/50 and trfc = 100 and booted 2000 8-9-8-24 PL8 givin a bit of MCH and same vdimm runt a loop of linx and failed so almost there
i will find out or die :ROTF:
yea, i will be hitting it with my SS so we'll see what she's got..Quote:
Originally Posted by andressergio
I have a very sweet ud3p that lovess quads, so it should be fun to
put that x3360 thru the torture test, i got to fune tune the board for some
of the non brute force benchies....
here is what just i did with the x3360...
and it still had more, i only pushed it a little...
I need to get better fine tuning my ram and system,,,,
#1 Xeon X3360 in CPU-Z with 4717.47 mhz
#1 Xeon X3360 in SuperPi with 10sec 327ms
#1 Xeon X3360 in wPrime 32m with 8sec 676ms
#1 Xeon X3360 in PiFast with 21.08 sec
#3 Xeon X3360 in wPrime 1024m with 4min 40sec 551ms
So that X3380 should be here by the weekend, hope it cools down, it was
frekin 95 and super humid today... :rolleyes:
:shocked::shocked::shocked::shocked::shocked::shoc ked::shocked:Quote:
Originally Posted by andressergio
that is what I am talking about, 1600 cas6, any everest benches with that setup?
sure mate hereQuote:
Originally Posted by l0ud_sil3nc3
http://img696.imageshack.us/img696/4...cr2everest.png
Cheers :up:
Sergio
well i know running my set at 2000 6-9-6-24 on the x58 and P55 takes a lotQuote:
Originally Posted by andressergio
of Qpi/Vtt voltage(1.40v) with vdimm of 1.66v in bios.so im not sure how much vMCH
it will take to do it on the P45.i mean thats a lot of stress on the NB to run such high
speeds and low cas.you will have to probably go from pl8 to pl 9 or 10 i would think
very nice mate :up: i did 5005 9,2 SPI 1M thats my record on the UD3P not using anything special just water coolling at 9,5multiQuote:
Originally Posted by systemviper
Cheers and congrats on the chip show us some results :up:
yea, that is where i need a bunch of practice,Quote:
Originally Posted by andressergio
is tightening up the ram
figuring out better skews
and finding a nice sweet slim OS....
so lots of work/learning still to do
booted but on CL7 but still not stable and yes needs VTT and MCH for now im tightening CL6 1600Quote:
Originally Posted by radaja
this i get now still stable
1600 6-8-8-6-24 / trfc 70 @ 1.65
http://img34.imageshack.us/img34/4180/captura1bc.png
Cheers :up:
Sergio
Yes mate all my tests are on PL8 even 2000 ones but look, at 2000 8-9-8-24 i get 11k / 10.6 / 10.6 / 48 latency so if i fo less timmings and more PL it think i will quit using 2000 and going tighten on 1600 CL6 as you can see in my last pic i like that speed and easier to get stable...the ECOS couldnt hold that stable so still a nice upgrade.Quote:
Originally Posted by radaja
Cheers :toast:
Sergio
Sergio...I know you want to stay at 9x500 but I would love to see if you can get 8.5x525 with mem @ 1680 / PL8 / 7-6-6-16 (or 20) / tRFC 60. You Everest scores should go through the roof. I got this at 8x525 with above mem settings, but couldn't get it stable on the UD3LR...
http://img378.imageshack.us/img378/8...hemem8x525.png
Right now my 24/7 is running 8x500 with my mem @ 1600 / PL8 / 7-6-6-16 / tRFC 60...
http://img260.imageshack.us/img260/4...pc247setup.jpg
So image what your 8.5x525 could do :D
hey mate nice speed :up: i can do better on lower CPU speed mate for sure but i want my good 4500, will try on those settings mate and report back ok ?Quote:
Originally Posted by bluestang
Thanks for your screens :up:
some more results tweaking pumping jumping :ROTF: not benching as i dont have XP anymore just want to be stable
2000 9-9-8-24 1T PL8 subs tweaked @ 1,73 yes giga needs volts :D makes me remember my old PI1200 :D
http://img155.imageshack.us/img155/7...cr1pl8spi3.png
http://img526.imageshack.us/img526/8...cr1pl8ever.png
http://img267.imageshack.us/img267/1...cr1pl8dosm.jpg
http://img232.imageshack.us/img232/3...cr1pl8cust.png
Cheers :up:
Sergio
Nice work Sergio! I just ram Superpi 32 in XP at 4.5 GHz and 5-5-15 DDR2 @500 and got 11.10.541
So nice work.
thanks mate :up: took me some work but going stable :up:Quote:
Originally Posted by NoGuru