Quote:
Originally Posted by radaja
I can't wait for the W3540 to get here as well, the 23x multi should make for a nice oc.
Also UPS dropped the ball today, yesterday I ordered a Xeon X3380 from them with Next Day Air AM and it looks like it will be Monday before I get it:(
Provantage had the best deal on the X3380 if anyone is looking. I just hope that I get a nice low VID chip.
Sweet , Took the chip to the shippers today, so you should have it early next week.
I am about to embark on some SS action with my UD3P, a P5Q and blackops, I have a lot of 775 chips for the adventure.....
I am a little bit worried about the UD3P, it was killer with the Q9650 and Q9550 hitting CLOSE TO 560 fsb, but for my 8500 and 8400 i need to hit over 600 fsb to even get on the board.
Has anyone here rocked the UD3P over 600fsb and if so any chance of a where you where with your voltages, not really vcore but the others i think make a big difference
once the board is pushed up that high. If i can start to hit some nice fsb's then i might even water cooll the board to help keep it cooler....
So this will be a fun week, also look forward to seeing what that 3450 can do, i can't wait to get a R3E but i need to go thru this pile of 775 chips first... :surf:
PS, I would love to play with that 3380 when you get done with it, that is just the chip for my UD3P
I was dumb when i got my X3380 ES and sold it way to quick, but yhte i7 just came out and i was seeing starz, i know it could have went higher... But i was also rocking with my
Q9650 and trying for a top spot and figured i didn't need both chips......
X3380 ES
Q9650
Q9550
I also need a Q9540 and a x3370 to add to the list......
I have seen some validations around 615 FSB, but I have no idea where the volt's where at.
Yea i am currently looking at hwbot and it seems that there are a few gig ud3p over 600 but the majority is the rampage extreme x48Quote:
Originally Posted by NoGuru
Here is a 710 FSB with the rampage and E8400 http://www.neoseeker.com/news/8431-n...lock-over-700/Quote:
Originally Posted by systemviper
i am checking out hwbot and there are no entries for the EP45T USB3P on there, is it because the board is somewhat new?
http://valid.canardpc.com/show_oc.php?id=431731
705 FSB on P45 Platinum ;)
There was a 720 validation somewhere but i cant find it right now...
Biostar tpower p45 board hit something like 730, EP45T-Extreme hit 740:
http://valid.canardpc.com/show_oc.php?id=780612
*edit and 750:
http://www.xtremesystems.org/forums/...d.php?t=237892
Wow 750 FSB, I can't wrap my brain around that :shocked:Quote:
Originally Posted by In-Fluence
Are there any non ES x3380?
Quote:
Originally Posted by OLDcomer
Yup mine should be here tomorrow morning. Boxed retail unit and I hope its a nice one, especially for what it cost:shocked:
The W3540 I just picked up was much much cheaper, oh well its just money right:yepp:
ahhh my :banana::banana::banana::banana:ty luck, I sold my low VID Q9650 for this Xeon X3380 with a 1.25 VID:shakes:
Well I just some random voltages in and got this
http://i42.tinypic.com/25stlya.png
however it failed prime blend in like 15 minutes.
the good thing is this a cool running chip, the above was 1.44 volts loaded.
grats on the new chip mate !!!
vid 1,25 doesn't mean that is bad generally are cooler chips and you can give more volts like on mine that its 1,2 vid, keep testing !!!
here are my results yesterday i finishing cabling the back part of the haf922 and took an hour to do some quick test on 24C ambient closed room temp
on the other setup i needed AC to pass this same, temps are great im very happy with it
http://img504.imageshack.us/img504/1040/p10403901.jpg
http://img163.imageshack.us/img163/8086/45001600cl7.jpg
http://img691.imageshack.us/img691/1...37cl7hpi32.jpg
Cheers !
Sergio
So i see you can't set the CR to 1T as well. I have only seen a handful of people running 1T on DDR3 boards. You have a nice chip, I was hoping for a 1.2-1.23 VID but oh well.Quote:
Originally Posted by andressergio
I didnt even try mate just OC for an hour and then went to bed, will try laterz...sorry you got a normal vid but keep trying as they're cooler you can pump voltsQuote:
Originally Posted by l0ud_sil3nc3
Cheers :up:
Sergio
Looking very nice Andressergio, so what's next, 4.75Ghz stable o/c? :D
How is it with the 9.5 multi?
Some nice parts in that loop too. Apogee XT ftw! :up:
I took a look at those radiator brackets as well, they seem like a good idea, but don't they block the intake for the fan behind it at all?
Got my RX240 in the other day and it has made the world of difference. I'm currently 5 hours P95 stable at 500x9, and although I'm giving it 1.45vcore for it (1.424v in CPU-Z), temps have maxed out at 72°C, which has meant a 5-8°C difference. My old rad was literally 'carpeted' in dust due to the higher fin density, but with filters in place and a closed case, this shouldn't give me any more issues. Just waiting for my USB3P and DDR3 now :D
Thanks In FluenceQuote:
Originally Posted by In-Fluence
Mobo is very nice here are the PROS:
1) still loves the same refs as my UD3P...on MCH and CPU
2) rail on the 12V its on 12,36 same as i measure with DMM the UD3P 12,11 so i guess that has a better regulation
3) due to 2 i can OC more the VGA on same volts as before
4) boots easy at 2000mhz mem on loose timmings
5) reboots are no more reboot loops recovers on 2 boots alone if i screw any OC
CONS i didnt find any
Hope GIGABYTE keeps improving BIOS on this very nice mobo :up:
My aim is 4680 on x9 wich is faster than 4750 on 9,5. For now 4608 mem on 1640 is my 24/7
Cheers :up:
Sergio
shoot me a template of your settings, I am curious to see what voltages you are using for MCH.Quote:
Originally Posted by andressergio
Quote:
Originally Posted by OhNoes!
How are you running in the 1T Command Rate? Can you post your template and what kind of memory you have?
sup mateQuote:
Originally Posted by l0ud_sil3nc3
normal ones i use 1,46 to 1,5 have a fan over it :up:
Some new results on the EP45T USB3P and the Gskills ECO
hey guys been testing a while to achieve CL6 but for now i got this that i like very much
http://img30.imageshack.us/img30/293...600cl7pl85.png
Cheers :up:
Sergio
about to put a X3360 to the test on my gem UD3P & SS and see if i can get some nice OC's today,....
should be some fun today on a rainy saturday.. :surf:
which they think necessary in the Northbridge voltage to maintain 517FSB?
voltage for use in day-day
EP45-UD3P rev. 1.1
thanks
Nice job Serg, now keep pushing :clap:Quote:
Originally Posted by andressergio
My MSN will not work anymore:shrug: If you have Yahoo messenger, my address is the same. Or I will get a hold of you through PM's.
Perfect day for it. Make sure and post your results. Good Luck.:up:Quote:
Originally Posted by systemviper
How much RAM is installed? You will most likely need 1.40 to 1.5Quote:
Originally Posted by gugle
BuddaBING~ :surf: Budda [b[ooM
I know this chip was pretty easy to ROCK the top hwbot spot but here it is on my first run...
M<aN O Man i love this UD3P for quads.
Hi , just wanted to give Ron a shout out for all his help and the SWEET SS he built for me!... :up::up::up: 3 thumbs up///
@ l0ud_sil3nc3 , we shouls swap chips for a few runs, I am sure with a little effort you can be 2nd... :rolleyes:
------------------- So here it is......
X3360 (8.5 multi) Freq : 4717.47 MHz (555 * 8.5) the [hwbot] top sp[ot....
runnnnnnning it @ 1.552v @ -47 was so sweet.
my first run ( 30min) i got the [hwbot] top sp[ot....
http://img.techpowerup.org/100508/viperfest-2010.jpg
thanks for your support and time!
TOP SPOT
SO that was my first victim @ viperfest (my 775 project)
i can 't wait to hit it later tonight, i am hoping for 5ghz before i am done,,,,
wahooooooooooooooooooooooo :surf: