sure can be some bios tighten timmings more than others...for ex F10B best bios and thigh timmings...but F10 has some new features and looser timmings wich for some can be good, im using it with no problems just re testQuote:
Originally Posted by gugle
Cheers
Sergio
I think NB is temperature without fan it gets very hot even at stock voltageQuote:
Originally Posted by andressergio
put a fan, it appears that gave an improvement
yeah been runing it since ages :up:Quote:
Originally Posted by gugle
http://i39.tinypic.com/2a6s0oh.png
this is on the EP45T USB3 with DDR3
its hot here today, it should be much cooler in a few hours
also my UD3P might be for sale along with my GSkill 1100's.
Either way this is a great board for any one that still likes to play with socket 775.
I will put the block enzotech SNBW, I have hereQuote:
Originally Posted by andressergio
I hope it improves
Quote:
Originally Posted by l0ud_sil3nc3
That pic is so small you cant even tell whats happening. :shrug:
Hey! Nice to hear that you're doing great!Quote:
Originally Posted by andressergio
Yeah, those Intel SSD's Rock. :up:
I'm surprised that you decided to try out the DDR3 Ver. Hope you get better clocks than before!
Cheers!
Sup mate yes i wanted to try some nice DDR3 on a nice Giga board with my X3380 will see how it goes :up:Quote:
Originally Posted by xzulu
Thanks !
Sergio
sorry about that that is a bit small here is a better one. . .Quote:
Originally Posted by Hoss331
http://i41.tinypic.com/2a78qqv.png
I have stuck sensors on cores 0,2,3
I can't wait to put this chip under water:up:
What are the dividers I should be using? I have some Kingston HyperX DDR3 2000 c9 if that helps. Also what MCH voltages should I be using?
Well you dont want to be using that one (3.33) since its borked so you can either try to get one of the 4.0s to work or just stick with 3.20B.Quote:
Originally Posted by l0ud_sil3nc3
none of the 4.0's seem to work, I guess the 3.20B will have to work.Quote:
Originally Posted by Hoss331
3.20B still has pretty decent bandwidth and at that speed I would think you could at least run it at cas7.
Did a quick bench today. http://valid.canardpc.com/show_oc.php?id=1151229
Nice work NoGuru, nice low voltage for that speed.
Could anyone tell me how low the voltage goes on the EP45T-USB3P please? I'm looking at a pair of G.Skill Eco's rated at 1.35v (although 1.5 is ok apparently), and was wondering if the board goes down that far?
Thanks In-Fluence:)Quote:
Originally Posted by In-Fluence
Eco's? Are you trying to save the planet one stick or ram at a time?:D
I was just looking at my options, speed isn't so important to me when it comes to ram although I might consider some better sticks at some point. They just seem like a good price, they look ok, and they can o/c reasonably well, plus the fact that they're g-skill is alway a plus in my books! So no info on the ram volts then? I'll have to take a peek in the manual - see if it's in there ;)
My T board goes down to 1.15 then 1.25, 1.35, 1.45, 1.50, 1.56, 1.58, ect, so you should be good.
Quote:
Originally Posted by Hoss331
My USB3P does as well.
I love my G.Skills, they will do 1066 at like 1.8v. :up:Quote:
Originally Posted by In-Fluence
That's reassuring to hear, thanks. Just waiting for the parts now. First will be my rad, but the board wont be with me for another week at least, so I'll fit & test the rad & see how things move along, hopefully this will replace the weakest link in my loop..
I will have a Xeon X3380 here tomorrow:D
l0ud_sil3nc3,nice ,looking forward to your results
Quote:
Originally Posted by radaja
I also have systemvipers w3540 batch #: 3846B coming as well, looks like i am going to be busy.
it's done 5.4 on LN2 @1.646 volts
Quote:
Originally Posted by l0ud_sil3nc3
You have your hands full, should be a lot of fun.Quote:
Originally Posted by l0ud_sil3nc3
oh wow so you snagged it huh?you should be on your way to someQuote:
Originally Posted by l0ud_sil3nc3
very fun OCing adventures indeed.the W3540 should get you some
very high OCs for sure:up:you will be busy