i find its much more stable all around with LLC off on this board and requires less volts on load to be stableQuote:
Originally Posted by WhiteFireDragon
Printable View
i find its much more stable all around with LLC off on this board and requires less volts on load to be stableQuote:
Originally Posted by WhiteFireDragon
It can stabilise voltages, BUT the strain on the PWM's and Samsung chip are enormous when benching.... hence why some users fried their mobo's by using LLC and high Vcore voltages... when going high voltages put it off :up:Quote:
Originally Posted by WhiteFireDragon
Hey guys,
I just added my latest results in the air (stock fan). My results are in low multiplier and FSB rates for now because these days are hot like hell man. I'll have got such nice results when I completed my watercooling setup soon. :up:
Lavalys Everest Cache and Memory Benchmark
8-8-8-24 1T:
Intel X48 & Crucial Ballistix PC3-16000:
Click link for full size screenshot...
1600Mhz :: 1.75v | 1600Mhz :: 1.75v | 1800Mhz :: 1.96v
Dual 32M SPi...OC Report
8-8-8-24 1T:
Intel X48 & Crucial Ballistix PC3-16000:
Click link for full size screenshot...
1860Mhz :: 1.96v - SPI32M
Cheers,
Arthur
fell asleep last night,so this morning went straight to 600fsb.
and zsamz your right too easy.
http://i28.tinypic.com/300va8o.jpg
http://i29.tinypic.com/2pslgmd.jpg
i know its not stable,but it will have to do
no work on saturday so ill have time to really have fun this weekend:D
Arthur,nice results
Nice work Arthur :up:Quote:
Originally Posted by Arthur
Nice work Radaja. Only 1.24 Vtt too :)
Since it's 600 FSB short orthos run season, here's mine from the other night. I ran this after a SPI32 run at the same settings to see how stable the CPU actually was. I initially thought it had barely made it through the SPI32M run, I never expected it to make it through 10 mins of small FFT's.
10 mins orthos @ 4.2 GHz (600 x 7) / DDR3-1920 MHz / 7-8-7-24
http://i720.photobucket.com/albums/w...00x7960MHz.jpg
Testing these 2 x 2GB Elpida's a little more.
SPI32M @3.94 GHz / 563 FSB / tRD 8 @ 1.47vNB / 900 MHz / 6-6-4-20 1T tRFC 60 @ 1.76vdimm
http://i720.photobucket.com/albums/w...v900MHz6-6.jpg
SPI32M @3997 MHz / 571 FSB / tRD 8 @ 1.47vNB / 913.6 MHz / 6-7-4-20 1T tRFC 60 @ 1.76vdimm -- So close to sub 11min @ < 4GHz!
http://i720.photobucket.com/albums/w...7v900MHz6-.jpg
SPI32M @ 4.25GHz / 500 FSB / PL8 pullins 1+2 / 1000 MHz / 7-8-7-24 1T tRFC 72 @ 1.72v
http://i720.photobucket.com/albums/w...ns121000MH.jpg
heres what i got this morning.im struggling to get pl8 to boot.i dont
understand why,i booted fine at 600fsb pl8 before.
7.5x600@4499 ddr1921 cl8 pl9 1T
http://i25.tinypic.com/95ugqu.jpg
everest
http://i30.tinypic.com/jqmhon.jpg
Looking good, perhaps your ram/cpu skews or ram timings need adjusting a little to get it just right.
CryptiK,thanks.yea thats what im thinking too.ill keep working on it.
8x563@4504 ddr1800 cl7 pl8 1T
http://i26.tinypic.com/28a6gaq.jpg
everest
http://i26.tinypic.com/2udud8n.jpg
CryptiK,which memory slots are you using?the white or blue?
ive got mine in the blue,but i read earlier in this thread that some were
saying the white are better.but im not sure if i read it right and cant seem
to be able to find it now.thanks
my blue slot are better
what what best bios guys for micron lol
i tried 1202 and 403 but it wouldnt boot at 600fsb anymore so i went back to 501.
im still trying to find out for sure what IC's these g.skill's have.F3--16000CL9D-2GBPI-B?
563 x 8 and 1800 C7 looks good for 24/7 (if this is your 24/7 board of course).Quote:
Originally Posted by radaja
I use the white slots, I switched to them after having some initial difficulty and I did not test the blue slots as rigorously. Apparently the white slots (channel B) has been electrically designed for better overclocking, and this is a common theme with X48 boards. As different ram kits behave differently, I think its a matter of 'what works best' for a particular kit.
It probably as I said above depends on the particular ram kit/IC type. I heard BIOS 0403 was good for micron.Quote:
Originally Posted by zsamz_
I'm using 1104, and no problems booting at 600 FSB here. No idea what those G.Skills have, could be KPT/GTS/HCF0 maybe something else. I dont think GSKill always use the same IC for a particular kit anyway. It depends how they behave.Quote:
Originally Posted by radaja
I think that PI-Black should be Samsung HCF0 ICs.Quote:
Originally Posted by radaja
hi CryptiK Orthos need to set to Priority 9 or 10 !!! not Priority 1
Whatīs the different?Quote:
Originally Posted by PatRaceTin
got my OZC animal kit today.
ci2kla,thanks ,do you know if these scale with voltage(samsung)?
after many tests i concluded 403 is really best with micron
got me to 1900 cas8
on another note my brand new pc3-14400 mushkins are duds cant even run stock withought errors
no wonder they couldnt do 2k :rofl:
gl with the animals radaja
Sorry I don't have much information Samsung HCF0s but many other power users has tested it and they generally have good comments on this IC. It can achieve high frequencies with lower voltages than Micron D9 based kits but it's not as Voltage Sensitive as the Microns. Usually they max out @ 2.2v while Microns can do higher with ultra high voltage like 2.4v+ (D9GTS). Also this kits don't like tight timings much.Quote:
Originally Posted by radaja
ci2kla,thanks for the info.
zsamz,thanks.and sorry to hear about you mushkin's
Update,well i tried my animals,at first i tried the white slots and had no luck
couldnt get them to boot while OC'ing them.threw them in the blue and they work great.
so i guess they like the blue slots.
Well I suppose this board is FUBAR.
Had a storm today but the pc was hooked up to and APC 1000. After the power returned, the board will no longer post.
Tried:
- Different videocard
- shorted the powersupply and it works by turning on the fans
- removed all but 1 stick of ram
- disconnect everything except for one harddrive
- tried jumper 2, 3 bios flashback
- removed battery.
Did not try another powersupply since I would have to buy one.
Result
Rampage extreme logo just flashes on and off, no boot sequence whatsoever.:shakes::shakes::shakes::shakes:
try your psu in another systemQuote:
Originally Posted by Think
if its not your psu might be the cpu
i think its the psu
i lost a psu recently to power commin back suddenly
Just purchased a new enermax psu and same problem. You really think it could be the cpu?Quote:
Originally Posted by zsamz_
you need to test can be bothQuote:
Originally Posted by Think
you must have a spare board lyin around
power surges are a :banana::banana::banana::banana:ed up thing you never know what they gonna kill
i got 2 powerbars protectin my main rig
Well, I tried different videocard, ram, cpu, psu. Unplugged everything on the board and no go so I've rma'd it and hopefully I can get it back before I come back from vacation. Hope the video card survived...that would be a &&&ch.Quote:
Originally Posted by zsamz_
Thx.
cross your fingersQuote:
Originally Posted by Think
asus has a habit of just resendin board as fixed while doin nothin to it
meanwhile try gettin the cpu tested
i just poped in a q9650 and its drivin me nuts
it dont like a 4 gig set no more lol
how bad is this?
radaja dont tell me about the ud3p i rather cut my pecker off than buy 1:p:
wouldnt even think about it?i know how you feel about gigabut:D
but still your off to a good start there.im sure you will get it up to 500fsb soon:up:
RE is no good with a quad above bus 475 but Giga..., o no, sorry :D just kidding.Quote:
Originally Posted by zsamz_
Seriously, RE is no good with a quad above bus 475, to much voltage is needed but if you donīt mind just turn on the juice on that PLL, FSB and a lot on the NB, donīt forget to tune those GTL Ref.
Hereīs a Q9650 @ 500, 4,0GHz with 4x1 Dominator 1800C7 @ 1600 777 21 Strong tRD 8
http://i282.photobucket.com/albums/k...8StrongStr.jpg
if i dont make 500fsb the cpu is history:rofl:Quote:
Originally Posted by radaja
man a quad is not fun like a e8600
only reason i got to 475 was +60 on gtls and man this cpu is a vtt whoreQuote:
Originally Posted by Ghostleader
i didnt push cpu pll i know i degraded my e6850 @ 1.7
i'm gonna push nb to 1.75
i'm just glad i changed all the sinks the board woulda been on fire:rofl:
nb hit 42c pwm 45c sb 44c
any hope to clock 2x2?
yea i know the feeling,when i had my Q9650,it was fun but then the limiting fsb factored in.Quote:
if i dont make 500fsb the cpu is history
man a quad is not fun like a e8600
mainly because i wanted to do some high fsb memory clocking.
Hereīs some 3Dmark result that I did run with my Asus Rampage Extreme / Q9650 / 2x1 Corsair Dominator PC-14400 1800C7 / EVGA GTX 285 FTW
@ various speed, bus 505 - 510, CPU speed 4,545 - 4,590GHz and ram @ 2020 - 2040 888 24 Strong tRD 8
Itīs pretty awesome I most say, consider that it was made with a quad, I did try the same with my EP45-UD3P and Rampage Formula but they couldnīt touch the Rampage Extreme.
http://i282.photobucket.com/albums/k...me/0368286.jpg
http://i282.photobucket.com/albums/k...me/0529017.jpg
http://i282.photobucket.com/albums/k...me/0624018.jpg
http://i282.photobucket.com/albums/k.../VanP14901.jpg
These hot days really annoying me alot. :wth: I do not setup my watercooling yet why there are some parts which I need take them for it first. Because of that I using my stock cooling todays. :( I'll purchase my NB+SB combo waterblock soon and I'll give you some results here. :up: When I oc'ed the system, my NB temps messing up well thats why I do not do anything about oc now. I saw the 56C on it man, thats really sad to me. :eek:
PS: Please anyone share the 3dmarks06 scores here.
Cheers,
Arthur
:yepp: stock is ridiculousQuote:
Originally Posted by Arthur
i put a katana3 on nb and priming my e9650 i got 43c max on nb i was @ 55c idle with stock cooling
radaja this the limit on air for me
Hell yea man, you are right about that. Plus I only have my E8600's stock fan here. :( By the way, you can check my some results on page 97, I could take them with my bloddy stock fan LOL. I just do not want to increase my temps more with my RE for a while.Quote:
Originally Posted by zsamz_
I purchased some fittings to my Thermochills today. I'll purchase my chipset block when my fittings arrived in my hand soon. :up:
Thanks again,
Arthur
:yepp: you dont want the heatQuote:
Originally Posted by Arthur
once nb gets real hot it degrades
and pwms just :smoke:
still a great start,and dont say thats it.i know you'llQuote:
Originally Posted by zsamz_
keep pushing and figure out a way:D
i bumped sb to 1.6v n 1.11v:eek:
next step is to use 2x2 stix
dont u guys like the power of a/c
I Love It!!!!:DQuote:
dont u guys like the power of a/c
Quote:
Originally Posted by zsamz_
New motherboard returned and I'm up and running. Trying to find stability again is such a pain with this board but I'm testing each module individually to make sure they are working correctly before I proceed with overclocking. I contemplated selling off the processor and board - jumping into the i7 area but it's just not worth it in my opinion.
I noticed that the board came with bios 1201 and it seems ok. Anyone have an opinion on this bios or should I flash back to 1104?
Thanks
i didnt like 1201 but i'm usin 1202Quote:
Originally Posted by Think
Just flashed and will play with 1202. I removed 2 of the 4 mushkin 996625 module. I forgot my original parmeters but am having difficulty hitting my 440 fsb mark.Quote:
Originally Posted by zsamz_
Heres a clocking settings thus far:
FSB 400
CPU RATIO 9
CPU SKEW AUTO
NB SKEW AUTO
PCIE 100
DRAM FREQ 1601
7,7,6,20,4,88,12,6
10,5,6,4,6,4,6
21,8,1,9,9
DRAM STATIC DIS
DRAM DYN DIS
AI CLOCK LIGHTER
COMMON PERFORMANCE 8
CPU V 1.45625
LLC EN
CPU PLL V 1.56406
FSB TERM V 1.35191
GTL0 - AUTO
GT1 - -40
GT2- AUTO
GT3- -40
NB 1.60372
DRAM 1.90831
NB DDRVref 12.5
DDR3 12.5
SOUTH 1.51106
SOUTH 1.06
BIOS 1202
Try the settings in this thread. http://i4memory.com/f54/asus-rampage...tml#post119013 Bios 1202 requires lower voltage settings for the NB.CPU PLL. FSB Term.Quote:
Originally Posted by Think
i was rock solid @475fsbx9 with q9650Quote:
Originally Posted by Think
200 divider
cpu 1.4
vtt 1.42
GTL0 +70
GT1 +60
GT2+60
GT3+50
sb 1.55
sb 1.1
i forgot to try to get 2x2 stable lol was usin 2x1 stix
Quote:
Originally Posted by paulxmn
Wow, 1202 bios is amazing. My NB, vtt volts are much less ( 1.42 ) than my previous settings and are running perfectly. The setting that was actually causing the most headaches was the AI CLOCK and COMMON PERFORMANCE. Setting them to Lighter and 8 worked, anything lower caused problems.Quote:
Originally Posted by zsamz_
Completely stable at 480 x 8.5 1:1 1601.
Thanks folks and thanks to MushkinSean.
:up:
PS. I can pass Prime95 for 24 hours but OCCT just crashes the system to blue screen. Personally think that OCCT is not a reliable program. Thoughts?
That bios is good for raid0 abductor not to have problem?ŋ my Hw is : E8600 , rampage extreme bios 501 , 2x2 g skill trident 1600mhz , raptor 74gb 16buffer x2 , 850w Modular TT Toughpower, 4850 saphire 512
max i would prime now is 30 min lol why would i stress the cpu n board so muchQuote:
Originally Posted by Think
the real test for me is gaming 1 hour+
Hello, guys. Have somebody tried 4GB G.Skill DDR3 PC3-16000 2000MHz Trident with Rampage Extreme? Or any PC3 16000 modules?
I'm now with G.Skill 4GB 1600MHz, but I need 8GB... The Q9550 is at 4.1GHz and I'm wondering, will I reach at least 4GHz with 8GB memory. Can I?
i gave up clocking my q9650 + 4 gigs on this boardQuote:
Originally Posted by Anarchist
so 8 gigs not gonna happen unless you doing a verry mild overclock
1202 is grate i managed to lower cpu, NB, vtt voltages.
EDITED
OMG also the FSB v.
Purchased 2 sets of 2000 ripjaws and tossed them in. I've never been able to get my 4 X 2 1600C7 (microns) to work stable in this board. Finally I had one set of the 1600C7 and one set of 1333C9 and clocked the 6gb to 1450MHz and gave it to my son. He's had it running for about a year this way. Well, I took the memory out, popped these ripjaws in and changed to the next speed, ie. 1450 --> 1828Mhz. Solidly stable, even in gaming!!!
http://i259.photobucket.com/albums/h...008/System.jpg
http://i259.photobucket.com/albums/h.../Memtest-1.jpg
I haven't even begun to really play with them. They just were stable. Go figure. :)
Cost = $97.00 X 2 for 8GB!
thanks derek
i was kinda hopin they didnt work good in rex
now i gotta get me a set:mad:
edit :rofl: just bought a set
If those Ripjaws can do 1800C8 I might consider buy one set, I just wait and see what you can do with those zsamz.
LOLzQuote:
Originally Posted by zsamz_
I just moved my ram speed up one bump. Changed the DRAM Voltage with testing, dropped the major timings, left both static read and write enabled, removed PF = 8 and set light to auto.
i cant get past 1600 even at cas 9
i should assume they are bad or ...:rofl::rofl:
edit:
1 stick is bad cant do 1333:rofl:
other stick can do 1828 so far fully stable cas8
ghost only 1 good stick
this is around max 1.8v
forget cas7
pl6
ghost i wont be ownin a set of ripjaws i dont think they are good enough compared to my patriot 2000 and 1800 sets
maybe the 1 good stick is not real good lol
i'm gonna wait till hyper prices settle
i got board to work with 8 gigs with acceptable bandwith:)
Guys, i got me a Rampage Extreme again from a webstore that was supposed to be refurbished (back from rma or something) but today i recieved it and it looks like it's brand new but it's a chines or japanese version! The text on the box and the manual are in chinese. :shrug:
Got it for a bargain so i'm not complaining but i'm just wondering, does the bios default to chinese or english?
always englishQuote:
Originally Posted by Zeus
its been a long time i havent seen a chinese bios
Nice Chip there!Quote:
Originally Posted by zsamz_
That's where I wanted to be. Prior to this memory I was stuck with unacceptable speed. Different modules and models brought me to the view that the issue was the memory controller. Finally the board died on me, (loss of a NB temp diode and halting the system) and I advance RMA'd it to get a new one very quickly. The new board was far better with memory, but still I could not reach high speeds and low latencies with 8GB.
So I am happy as well.
Quote:
Originally Posted by DerekT
thanks btw thats econo mode:D
still waitin on rma of ripjaws
how high did u get with 2 stix?
Never actually played with two. I wanted 8GB and I'm fine with 1830 @ 8GB with 475FSB or 1648 @ 8GB with 515FSB. It's pretty much assured 2000Mhz with 4GB though if I can make 1830 @ 9-8-8-20 2T (No 8CL even with 1648) with 8GB on this board.Quote:
Originally Posted by zsamz_
It feels great to be back on the Rampage Extreme again. :)
Did some testing and again 600FSB was a breeze...
http://img.photobucket.com/albums/v6...s/600FSBRE.jpg
The CSX Diablo's i got seem to need exceptional high voltage, 2.15V for DDR1800 7-6-5-18. :(
Maybe i have to get me some Corsair dominator GT's.
Btw, im running 4.5GHz at 1.32Vcore now, still have to test stability though. :)
Very Nice Zeus!! Back to the Dark Side, huh? I thought you sold all your Intel stuff?:shrug:
I did but sold the AMD gear and got me a new RE. Seeing Vivi breaking the 3D01 WR breaking on this setup proved a bit too much for me. :)
Shame i can't get the Diablo's running at decent voltage, 2.14V for daily use is a bit much.
I'm kinda interested in them tweaker shortcuts on ya desktop :) Diablos here do 2000mhz C8 at 2volts, I'm on 1204 bios... never even tried 600FSB on my board :( my Phase can't handle the cpu at 10X above 560FSB...
Zeus try to find a kit of Cellchok like the one on the pic and you are going to see some nice boost.Quote:
Originally Posted by Zeus
It's just Monteboy's SuperPi tweaker for doing copy waza, if you're interested, send me pm mate. ;)Quote:
Originally Posted by Leeghoofd
That's a nice kit you got there, how much volts for that?Quote:
Originally Posted by kintaro
Been searching for a kit of Cellshocks but to no avail.
Now i ordered 2x1GB Ballistix 1800 8-8-8, let's hope it has some nice GTS chips on them.
I don't know what's up with the Diablo's, 1600 7-6-5 runs with just 1.85V but 1800 7-6-5 requires 2.15V! :eek:
i'm waitin on mr replacements of ripjaws
but i rather have a set of hypers to another set of d9gts
Hey guys new around here :). Just got my new rampage extreme, and i'll use my Q9650 on her. Im looking for a new ram kit for o/cing ;), what would you suggest? i've seen the new dual channel kits for i5/i7 such as G.skill ripjaws, are these worth of trying? Or should i go for a D9GTR kit like CSX diablos? Also, has anyone tried overclocking a 2x2 kit? As far as i read, REX doesn't like a lot 2x2 kit..Should i go for 4x1? Or maybe a 3x2 kit would be better?(i could keep it also for the future, when i'll upgrade at a X58 m/b) im kinda confused :shrug:
Thanks a lot!
PS: Sorry for my bad English..
I certainly like my Corsair Dominator 1866C7GT Hypers, they've been solid for months now, and are very flexible.
Here is a sample of my 2 x 2GB Hyper testing.
http://www.xtremesystems.org/forums/...postcount=2384
http://www.xtremesystems.org/forums/...postcount=2385
http://www.xtremesystems.org/forums/...postcount=2386
http://www.xtremesystems.org/forums/...postcount=2406
i guess you havent read no pages in this threadQuote:
Originally Posted by $Samuel$
only 2x1 or 4x1 with a quad on this board
and dont extpect higher than 500fsb with a quad for 24/7
nothin will be better than stix with hypers
Here's my Q9650 on the REX with 2 x 2GB Hypers. The board didn't like running high ram speed with the quad, it changes the whole dynamic. At 4.1 - 4.3GHz, large FFT's were very hard to stabilize.
http://i720.photobucket.com/albums/w...4v119VttPL.jpg
This is why i love the RE so much:
http://img.photobucket.com/albums/v6.../32M620FSB.jpg
I haven't changed the tim under the heatpipe assembly yet, only added washers on the backside and a Swiftech NB max waterblock.
This board is just made for dualcores with 2 (or 4) x1GB Micron GTR/GTS. :)
I second that with the Micron GTR/GTS but I most say that RE is pretty good with quad also.Quote:
Originally Posted by Zeus
Sure, I had to feed it with a lot of juice to make it happen but sometimes itīs just worth it :cool:
http://www.overclock.net/attachment....1&d=1252828232
Nice results guys, good work! :up::up: Thanks a lot for the advices!
@zsamz_ , nope, i didn't read the whole 99 pages of this thread, but the most of them, and thats the reason i asked about, because lots of people have tried new 2x2 kits on this m/b, but the results were not so good in contrast with 4x1/2x1. Of course i dont expect from my Q9650 to run higher than 500 FSB for 24/7 (actually have been running at 490 fsb on Evo for every day :D). I have access on a 4x1 set of Diablo's, so these are the first i'll try out, i'll inform about the progress :).
ghostleader forget ripjaws on rex unless you want 8 gigs@cas9
cant do 1800 cas8
1667 cas7 ok so far pl7 500fsb microns i needed pl8 for same
so far 1900 cas9
does not respond to voltage 1.92v
i think they are powerchips low% bbsa
maybe i should take a look under the hood lol
i'm thankfull i didnt set my patriot 2k lol
Thanks zsamz, good to know.
I think I donīt bother with 2Gb stix any more on the RE, I stick with my 4x1 Dominator 1800C7 (D9GTR), they do 1800C7 really nice with my Q9650 @ bus 450.
BTW, I on to test SLI hack on my RE, I did it with my RF so it shouldnīt be any problem to do it on the RE.
Finally managed to run 1M at 5GHz. :)
http://img.photobucket.com/albums/v6...ctory/9282.jpg
With my old Q822A435 this was not possible, it had a brick wall at 4940MHz.
Going back on XP and tweaking some will give a better score, hoping to do sub 9 seconds this winter with the aid of some cold air.
very nice zeus. is this another 435 chip you have?
@Zeus
Nice work :up:
Just curious, whatīs your volt and gtl setup for that?
Yup. ;)Quote:
Originally Posted by WhiteFireDragon
Been looking for you "over there" but none available at the moment.
I will keep my eyes peeled.
Most at auto except:Quote:
Originally Posted by Ghostleader
Vcore 1.51V
Vdimm 2.2V
Vnb 1.73V
NB skew 100ps
Transaction booster manual PL9
clock twister light
LLC enabled
all GTL's at auto
It can do 32M at 620 with these settings.
Nice work on 620 FSB 32M / 625 FSB 1M, what PL is that at?
i ordered a set of hypers my last effort with 2g stixQuote:
Originally Posted by Ghostleader
i saw the posts but i on the red team now
i'm lookin for a cheap 8800gt to play with the hack
Performance Level 9Quote:
Originally Posted by CryptiK
Up to 600FSB PL 8 is possible. :)
yes its verry weird this board likes 600fsb for some reasonQuote:
Originally Posted by Zeus
Hello to all!
First of all i would like to introduce my system
Mobo: Asus rampage extreme
CPU: Intel QX9770
Ram: 2x Corsair XMS3 CM3X1G2000C9DNV
GPU: 2x Asus EAH 4870x2 CrossfireX
my cpu and NB are watercooled,gpus stock
I am trying to overclock my rig for a 24/7 use @ 4Ghz (cpu) and at least 1800Mhz ram speed.
What I ve done so far are:
Using the above settings i manage to boot and play games for several hours but sometimes i get Bsod...Code:Rampage Extreme 1202 Bios Template
Extreme Tweaker
Ai Overclock Tuner [Manual]
OC From Memory Level Up [Auto]
FSB Frequency [450]
CPU Ratio Setting [9]
> CPU configuration
CPU Ratio Setting [9]
C1E Support [Disabled]
CpU TM Function [Enabled]
Max CPUID Value Limit [Disabled]
Vanderpool Technology [Enabled]
Execute Disable Bit [Enabled]
Core MultiPprocessing [Enabled]
* CPU clock skew [Delay 300ps]
* NB clock skew [Delay 100ps]
FSB Strap to North Bridge [400]
PCIE Frequency [100]
DRAM Frequency [1800]
DRAM Command Rate [2N]
DRAM Timing Control [Manual]
1st information
CAS# Latency [9]
RAS# to CAS# Delay [9]
RAS# PRE Time [9]
RAS# ACT Time [24]
RAS# to RAS# Delay [Auto]
REF Cycle Time [Auto]
WRITE Recovery Time [Auto]
READ to PRE Time [Auto]
2nd information
READ to WRITE Delay(S/D) [Auto]
WRITE to READ Delay(S) [Auto]
WRITE to READ Delay(D) [Auto]
READ to READ Delay(S) [Auto]
READ to READ Delay(D) [Auto]
WRITE to WRITE Delay(S) [Auto]
WRITE to WRITE Delay(D) [Auto]
3rd information
WRITE to PRE Delay [Auto]
READ to PRE Delay [Auto]
PRE to PRE Delay [Auto]
ALL PRE to ACT Delay [Auto]
ALL PRE to REF Delay [Auto]
DRAM Static Read Control [Disabled]
DRAM Dynamic Write Control [Disabled]
> DRAM Skew Control :
DRAM CMD Skew on Channel A [Auto]
DRAM CLK Skew on DIMM A1 [Auto]
DRAM CLK Skew on DIMM A2 [Auto]
DRAM CTL Skew on DIMM A1 [Auto]
DRAM CLT Skew on DIMM A2 [Auto]
DRAM CMD Skew on Channel B [Auto]
DRAM CLK Skew on DIMM B1 [Auto]
DRAM CLK Skew on DIMM B2 [Auto]
DRAM CTL Skew on DIMM B1 [Auto]
DRAM CTL Skew on DIMM B2 [Auto]
Ai Clock Twister [Moderate]
Ai Transaction Booster [Manual]
(-- Manual --)
Common Performance Level [10]
Pull in of CHA PH1 [Disabled]
Pull in of CHA PH2 [Disabled]
Pull in of CHB PH1 [Disabled]
Pull in of CHB PH2 [Disabled]
(-- Manual --)
EPU II Phase Control [Auto]
*** Please key in numbers or select voltage!***
CPU Voltage [1.4]
Load-Line Calibration [Auto]
CPU PLL Voltage [1.51106]
FSB Termination Voltage [1.31]
CPU GTLVref(0) [+90mV]
CPU GTLVref(1) [+50mV]
CPU GTLVref(2) [+90mV]
CPU GTLVref(3) [+50mV]
NB GTLVref [+60mV]
North Bridge Voltage [1.51]
DRAM Voltage [1.85]
NB DDRVref [Auto]
DDR3 Channel A Vref [Auto]
DDR3 Channel B Vref [Auto]
South Bridge 1.5 Voltage [1.51106]
South Bridge 1.05 Voltage [1.06039]
******************************************
CPU Spread Spectrum [Disabled]
PCIE Spread Spectrum [Disabled]
I started to test my system using Prime95 and Everest but while FPU stress test my hardware fails during the first 4-5 seconds...
Any help appreciated...
Alex
that OC'ed rig you have will draw some serious power during gaming. what PSU do you have? set your multiplier to 6 and and prime it at 450fsb first. increase it until you find what the CPU can handle at that voltage and increase your voltage to see if it helps. for the skews and GTL's, i hope you didn't just copy it from someone's template
glts dont look right
and if you clocking 2x2 stix with quad go pray to god
CPU GTLVref(0) [+90mV] 60
CPU GTLVref(1) [+50mV]50
CPU GTLVref(2) [+90mV]50-60
CPU GTLVref(3) [+50mV]50-60
NB GTLVref [+60mV 40-60
Thanks for the help...
It seems that in order to operate with 9x multiplier i need 1.42v on my cpu but as a 45nm cpu this is not very good...moreover while fpu stressing i noticed temps from 45 idle going up to 96 in just a few seconds...
I lowered my multiplier to 8 changed my gtls to 60 50 60 50 60
and cpu voltage to 1.35v
With that settings i am able to run fpu with no probles and max temps of 86... :confused:
As for my previous gtls i tried the small excel application i found in the forum
(i am a newbee BTW)
My rams are 2 sticks of 1GB though.
Finally, for PSU i use a Tagan PipeRock TG1100-BZ 1100w so i do not think i have any issue with power.
right now my bios settings are:
I am about to check for FSB 470 and multiplier 8.5 to see what happens...Code:Rampage Extreme 1202 Bios Template
Extreme Tweaker
Ai Overclock Tuner [Manual]
OC From Memory Level Up [Auto]
FSB Frequency [450]
CPU Ratio Setting [8]
> CPU configuration
CPU Ratio Setting [8]
C1E Support [Disabled]
CpU TM Function [Enabled]
Max CPUID Value Limit [Disabled]
Vanderpool Technology [Enabled]
Execute Disable Bit [Enabled]
Core MultiPprocessing [Enabled]
* CPU clock skew [Delay 300ps]
* NB clock skew [Delay 100ps]
FSB Strap to North Bridge [400]
PCIE Frequency [100]
DRAM Frequency [1800]
DRAM Command Rate [2N]
DRAM Timing Control [Manual]
1st information
CAS# Latency [9]
RAS# to CAS# Delay [9]
RAS# PRE Time [9]
RAS# ACT Time [24]
RAS# to RAS# Delay [Auto]
REF Cycle Time [Auto]
WRITE Recovery Time [Auto]
READ to PRE Time [Auto]
2nd information
READ to WRITE Delay(S/D) [Auto]
WRITE to READ Delay(S) [Auto]
WRITE to READ Delay(D) [Auto]
READ to READ Delay(S) [Auto]
READ to READ Delay(D) [Auto]
WRITE to WRITE Delay(S) [Auto]
WRITE to WRITE Delay(D) [Auto]
3rd information
WRITE to PRE Delay [Auto]
READ to PRE Delay [Auto]
PRE to PRE Delay [Auto]
ALL PRE to ACT Delay [Auto]
ALL PRE to REF Delay [Auto]
DRAM Static Read Control [Disabled]
DRAM Dynamic Write Control [Disabled]
> DRAM Skew Control :
DRAM CMD Skew on Channel A [Auto]
DRAM CLK Skew on DIMM A1 [Auto]
DRAM CLK Skew on DIMM A2 [Auto]
DRAM CTL Skew on DIMM A1 [Auto]
DRAM CLT Skew on DIMM A2 [Auto]
DRAM CMD Skew on Channel B [Auto]
DRAM CLK Skew on DIMM B1 [Auto]
DRAM CLK Skew on DIMM B2 [Auto]
DRAM CTL Skew on DIMM B1 [Auto]
DRAM CTL Skew on DIMM B2 [Auto]
Ai Clock Twister [Moderate]
Ai Transaction Booster [Manual]
(-- Manual --)
Common Performance Level [10]
Pull in of CHA PH1 [Disabled]
Pull in of CHA PH2 [Disabled]
Pull in of CHB PH1 [Disabled]
Pull in of CHB PH2 [Disabled]
(-- Manual --)
EPU II Phase Control [Auto]
*** Please key in numbers or select voltage!***
CPU Voltage [1.35]
Load-Line Calibration [Auto]
CPU PLL Voltage [1.51106]
FSB Termination Voltage [1.31]
CPU GTLVref(0) [+60mV]
CPU GTLVref(1) [+50mV]
CPU GTLVref(2) [+60mV]
CPU GTLVref(3) [+50mV]
NB GTLVref [+60mV]
North Bridge Voltage [1.51]
DRAM Voltage [1.85]
NB DDRVref [Auto]
DDR3 Channel A Vref [Auto]
DDR3 Channel B Vref [Auto]
South Bridge 1.5 Voltage [1.51106]
South Bridge 1.05 Voltage [1.06039]
******************************************
CPU Spread Spectrum [Disabled]
PCIE Spread Spectrum [Disabled]
Thanks again for any help given!
zpower go for 475x9 1.3-1.4v it can be done easy
dont be scared to give more cpu vtt 1.4v
zpower, you can't just copy/paste someone's setting and use the exact settings for your mobo. yes, it's the same mobo but exact tuning settings will be slightly different (just like how CPU's from the same batch can OC differently). you need to tune it from the ground up if you want optimal settings. this mobo's CPU and NB skews are extremely sensitive and it'll be noticeable whether you have the skews right or not. GTL's are important for quads, but not so much for dual cores. this you'll just have to do a trial and error tuning. i would give it a little more vPLL and vtt, and enable the LLC. that should get you somewhere between 450-500fsb
Okey guys, here we have some 9800GTX SLI on my Rampage Extreme.
This is what you want when you have rebooted after the "SLI hack".
http://i282.photobucket.com/albums/k...me/SLIRE01.jpg
SLI capable system, yes indeed, lets open NVIDIA control Panel and choose "Enabled SLI", notice the X58 in the CPU-z, the thing is, you fool the Nvidia driver to think itīs running with a X58 chipset. :ROTF:
http://i282.photobucket.com/albums/k.../SLIRE03-1.jpg
Benchtime, single vs SLI.
Rampage Extreme, E8600 @ 500x8,5 4,25GHz, 2x2 OCZ Platinum LV 1600C7 @ 1600 777 21 1N tRD 8 Strong, XFX 9800GTX Black Edition
Single
http://i282.photobucket.com/albums/k...eStalkerCl.jpg
SLI
http://i282.photobucket.com/albums/k...alkerClear.jpg
Single
http://i282.photobucket.com/albums/k...ngleCrysis.jpg
SLI
http://i282.photobucket.com/albums/k...1SLICrysis.jpg
Single
http://i282.photobucket.com/albums/k...eCrysisWar.jpg
SLI
http://i282.photobucket.com/albums/k...ysisWarhea.jpg
Single
http://i282.photobucket.com/albums/k...le3DMark06.jpg
SLI
http://i282.photobucket.com/albums/k...LI3DMark06.jpg
The scaling is pretty awesome and ~38 avg fps in Crysis Warhead, Enthusiast @ 1680x1050 with two 9800GTX isnīt bad at all.
Does that sli hack also work under Windows XP?
Yes it does.
I think so, you can read more about it here.Quote:
Originally Posted by Zeus
finally got me a set of hypers
man its like pullin teath:mad:
scalin better with cas7 then blue screens
what kinda vtt and vnb needed for 600fsb?
what strap you guys using as well
333 strap, 1.24 VTT and 1.55NB with an E8600 and 2Gb ( 2 x 1024 ) CSX Diablo's
zsamz - Hypers go quite well on this board, refer to my benches also those of the REX master, Cheapseats.
Bobbylite - 1.24 Vtt and 1.43vNB (BIOS) gets me 600 FSB Orthos stable.
thanks guys