I see it's for "server-use"....thanks for letting me know...never knew about this one....Quote:
Originally Posted by OLDcomer
seems like a Quad Core E8500 @ 3.16...same frequency...
Wonder if the UD3 serious would support the X3380 since it is socket 775...
Actually that might be one to go to after the Q9650...for me....kind of like the next step up and then either the QX9770 or the i7 975 @ 3.33...
or that 3.5 one they are said to be coming out with....
interesting....:clap::clap::clap:
it was known when they first released that some died on more than 1,4VTT or degraded...E0's are more robust chips...inmoQuote:
Originally Posted by RAMMAN
Cheers :up:
Sergio
that's a load off my mind....thanks!!!!:up::up::up:Quote:
Originally Posted by andressergio
edit: or at least i hope so....
so the safe limit for c0 chips is 1.3vtt? back in the day the qx9650 held a few world records so it must clock well even without high vtt. btw i got another lockup a few hours into tf2 on a more conservative 450fsb 1:1 on yet another hot summers day. this definitaly has to do with temps as it will run orthos indefinitely but orthos doesnt get the northbridge as hot as games do. the nb hs is definitaly getting to the point where it starts to burn fingers and worse still the ram is getting quite hot as well.
edit: strangely enough i lower mch back to 1.2 and mch ref back to 0.76 and it played tf2 for 5 hours not stop no problem
As I have mentioned in this thread my EP45 UD4P rev1 died a week ago, but tomorrow I am recieving a EP45T Extreme Iam borrowing from a friend. How does this clock compared to the UD4P if anyone know? I will use watercooling ofc. But I hope to break my prev cpuz of 4196 with my Q6600.
They support the 3380 just fine.Quote:
Originally Posted by Gameman
excellent! Thanks You mate.... the difference btween E0 Q9650 and E0 X3380 may be like difference between E8400 @ 3.0 and E8500 @ 3.16....or even E8600 @ 3.33 (my last cpu by the way)....it may just yield that extra mhz for 4.7ghz-5.0ghz Usable ..Quote:
Originally Posted by Hoss331
I'd definitely fork out 500 for a guaranteed 4.5ghz - I mean that's still lower than what the Q9650 used to cost anyway....I remember when it was like 800.00 plus....
I was right 4.7-5.0 ghz....
I see it was done just recently by Jor3llBR on a UD3P....
although it took water cooling....
still a Xeon 3380 at 4.6-4.7 daily would be awful nice.....
and I imagine if the UD3P supports it the UD3L will as well
I wouldn't mind having the X3380 and the new EP45 UD5 to play with...
well maybe, but i'll definitely be looking at the X3380... :up::up::up:
thanks
they seem to be awesome clocker as well:up:great at high fsbQuote:
Originally Posted by Mech0z
[Team.AU] Gigabyte GA-EP45T Extreme - P45 DDR3 Monster
this sounds tempting...
I was supposed to get the original EP45 Extreme DDR2 version instead of the Rampage Formula X48 I did, but I wanted the cpu-level up which proved to be a waste....
The EP45 Extreme Motherboard can be found in Canada for almost HALF of what it used to be (200.00 vs 400.00).... about 40.00 more than the UD3P sells for now....:up::up::up:
I know this advice was aimed towards the guy with theQ6600, but after reading all the reports of how easy Quads reach 500 fsb ALSO on this board and the LED display and reset switches AND 12 phase power...I'm kinda leaning towards it instead of replacing my now buggered X48 DFI p.o.s....
I was thinking of the LanParty T2RS Plus for 500 Quad fsb - but I'm not shelling out another 150.00 for CODE 88....:shakes::shakes::shakes:
I'm starting to see code 88 in my dreams now...:down::down::down:
OMG
oh well...below (a sample I found in a review) is why I find this idea so tempting...
http://i432.photobucket.com/albums/q...k666/fixed.jpg
ps: thanks for the idea - i had this in the back of my mind from a while ago, but didn't think they were still available new even....
edit:;););)
don't get me wrong, not at this very moment, but perhaps after a UD3P or another UD3R that actually works....
just got the idea because that other guy had the good fortune to get to use one...
I dunno...I'll find something that works besides this UD3L...
i believe this board is defying the laws of physics lol. 475x7 is orthos stable with only 1.3 vtt 1.24 mch 2.2 vdimm all other voltages normal. 1:1 400 strap 4-4-4-12 pl9. not too many boards can do 475fsb stable with a quad and only 1.24 mch. mch skew is set to 50ps, i think it has made quite a bit of difference. but i fear it has something to do with the low room temp atm because its cloudy and orthos doesnt raise temps like games do.
http://a.imagehost.org/0217/475_fsb_stable.jpg
10k write is awesome but im dissapointed that read has dropped below 9k though. pl8 will fix that but there is a big question mark if it would be stable or not
edit: played some tf2 for an hour no problems
Here is a little update that I will be putting in my signature here now. :up: :up:
XTX 5870 @ 1GHz / 1200..
http://service.futuremark.com/compare?3dmv=1836125
http://img42.imageshack.us/img42/1977/42ghz.png
^^^higher than my 3dmark06 score lol.
pl8 is working too, passed 1024k and 8k after 31 minutes of orthos blend before i stopped it.
http://a.imagehost.org/0620/475_fsb_pl8.jpg
i believe i have found a new 24/7 setting that can be used for benching too :D
Glad to hear you're enjoying your Motherboard as well. Here's my 3DMark06 score which I haven't updated in awhile I'll add.. :up:Quote:
Originally Posted by RAMMAN
http://service.futuremark.com/compare?3dm06=13076068
here is my 3dmark06 score
http://service.futuremark.com/compare?3dm06=12985772
your 06 score is almost the same as my 05 score.
http://service.futuremark.com/compare?3dm05=5118864
just curious, has anyone ever been able to stabilize 475fsb with a quad and only 1.24 mch core? or did i somehow get a cherry picked mch by buying a budget board at a local computer store? as you can imagine it was flaky in the mid 460s with just 1.2 mch but 1.24 and normal mch ref appears stable.
edit: played 2 hours of tf2 no problems
well little update
http://i49.tinypic.com/291z4lu.jpg
touch 18K for CPU score ON VANTAGE
http://i50.tinypic.com/5ebclu.jpg
very good...now if you could only UP that multiplier to 8.5 while keeping it stable you got the big 4000...:up::up::up:Quote:
Originally Posted by RAMMAN
Quote:
Originally Posted by truehighroller
I can get me 1 g...not sure how stable it would be though....
I definitely envy your pixel/texture fillrate though....
wanna get the 5850 next....
http://i432.photobucket.com/albums/qq43/davk666/1g.jpg
Little stability TEST
Hyper PI 16 MB --- PASS
http://i50.tinypic.com/34rwow4.jpg
PRIME 1 Hours.......
http://i45.tinypic.com/vyy1as.jpg
Quote:
Originally Posted by Gameman
Good job there man. :up: That is a feat, I'm guessing you either froze it or have water cooling on it or modded the voltage system. :up: I never did get mine that far up, I think I had mine to 900 / 1200, I think..
looks like a new ud3 model? usb 3.0
GIGABYTE GA-EP45T-USB3P LGA 775 Intel P45 USB 3.0 ATX Intel Motherboard
That looks way better than the previous boards, if I had known they were coming out with this I would have got it instead of the regular T board. And wheres the 24 phase power, they release a newer ddr3 model board yet forget the 24 phase. :(
Quote:
Originally Posted by radaja
http://img682.imageshack.us/img682/6...ture212010.jpgQuote:
Originally Posted by Hoss331
Nice Gigabyte does it again :up:
Hopefully they enhanced DDR3 compatibility and added OC ability to 2000Mhz_ddr :shrug:
According to spec.:Quote:
Originally Posted by Jor3lBR
-Support for DDR3 2200+/1333/1066/800 MHz memory modules
http://www.gigabyte.com.tw/Products/...GA-EP45T-USB3P
I wish this board came out about a month ago, would have saved some money and got this and not the x58. I am very tempted to order, the price is very good. I was just about to sell my 9650 to.
I am sure zsamz will get one so he can kill the latest from gigabyte. lol
I sure hope it recovers from failed oc as well as the p55's and the x58's.
http://www.newegg.com/Product/Produc...82E16820231336 :shocked: