My "murder" project.

Printable View

Show 100 post(s) from this thread on one page

07-11-2008, 01:45 AM
-Gab

Damn. These cases are so beautiful that I am now considering fitting my next rig inside a TJ07 instead of a V600/V1000. If, as Exso states, Murdermod will be "individual mods that one can purchase for use in their builds", I will certainly make the switch... probably.
07-11-2008, 02:32 AM
hiiyah777

^^Certainly Probably? How exactly does that work? Lol
07-11-2008, 02:41 AM
-Gab

It just means that I feel that it is not really reasonable... but very tempting at the same time :D
07-12-2008, 10:45 AM
charles_h

Thanks for the comments Guys. :)

Quote:

Originally Posted by Markicks

lol I was to focussed on what you're going to do that I didn't think of that solution. Anyways, me likes internal more. :yepp:

I agree, internal is hella more convenient but it's just not going to work into this design. My hope is that the result will be worth the inconvenience.

Quote:

Originally Posted by GrossmeisterB

Another question: you sleeved all the wires from ATX/PCIe etc. with 1/4" Techflex?? which of their products did you use? I think it's the "Flexo PET"??

Thanks for your help again man!!

Yes, I used the 1/4" Flexo PET on FC's build. As dualbrain say's, there's a superior product available which I assume he's told you how to get. This is his discovery so I'm not going to comment further. :)

Quote:

Originally Posted by dualbrain

Hey Charles: Can I tell GrossmeisterB about the secret sleeve that we use for our murder-builts in Germany ... ;)

No. ;) :D :p:

Quote:

Originally Posted by dualbrain

Sorry Charles ;) But he asked :D

No worries!

Something tells me you have a few new PMs. :)

Quote:

Originally Posted by Exso

Definitely basing my next build off of the murderbox. Will the murdermod be a complete cases, or individual mods that one can purchase for use in their builds, or will it be possible to do either? I ordered my TJ07 3 days before this thread appeared. I am beginning to think I should have waited. :)

As FC said; murderMod will be available as a complete modded TJ07 or you can choose the parts you like and use your own case.

Quote:

Originally Posted by -Gab

It just means that I feel that it is not really reasonable... but very tempting at the same time :D

Reason has never resulted in anything exciting for me while temptation, well, that's a different story. ;)
07-13-2008, 12:10 AM
dingdong555

Really nice man, as soon as i get enough cash for my water calling build, I can look up to this as I have a TJ07 =)
07-13-2008, 02:19 AM
-Gab

Quote:

Originally Posted by charles_h

Reason has never resulted in anything exciting for me while temptation, well, that's a different story. ;)

That's right ;)

Well, I have two more questions.

I read the thread again but could not find anything about the precise kind of tape you used to attach the window. Have I missed anything, and if not, would you share this secret with us?

I have the same question concerning the stuff you used to remove the Silverstone logo, have you asked your friend if it was available as a consumer product?
07-13-2008, 04:34 AM
GrossmeisterB

Quote:

Originally Posted by charles_h

Yes, I used the 1/4" Flexo PET on FC's build. As dualbrain say's, there's a superior product available which I assume he's told you how to get. This is his discovery so I'm not going to comment further. :)

Yeah, he told me about that "special" thing, but it was too late, I allready orderes the Flexo PET, so I think I will just use that, as it's not that bad looking... :D
Thanks for all your help guys! I can't wait for all the stuff to arrive so I can start building!!
07-13-2008, 06:33 AM
Markicks

Quote:

Originally Posted by GrossmeisterB

Yeah, he told me about that "special" thing, but it was too late, I allready orderes the Flexo PET, so I think I will just use that, as it's not that bad looking... :D
Thanks for all your help guys! I can't wait for all the stuff to arrive so I can start building!!

Here in the Netherlands we are allowed to send the package back within 7 days after the sale, without having any reasons. There must be some kind of rule in German too, isn't there?
07-13-2008, 07:22 AM
Steffen

Yes, but we have 14 days :D
07-13-2008, 07:58 AM
GrossmeisterB

Quote:

Originally Posted by Steffen

Yes, but we have 14 days :D

Yes, but not for things that were cut in length extra for me, and those 200m-package was a BIT too expensive... :D
07-13-2008, 08:15 AM
Markicks

Quote:

Originally Posted by GrossmeisterB

Yes, but not for things that were cut in length extra for me, and those 200m-package was a BIT too expensive... :D

lol, better ignore my reply then, hehe! :p:
07-13-2008, 09:00 AM
disruptfam

Charles i'm interested on what way you setup airflow direction in the bottom section of fc's rig.
07-13-2008, 12:30 PM
GrossmeisterB

Quote:

Originally Posted by Markicks

lol, better ignore my reply then, hehe! :p:

Yeah, I allready phones the german Techflex-people, they were very helpful, and he said that normally this ain't a problem, but my order was cut allready and packaged, so no way to send it back...but I think if Charles used Flexo PET as well, it can't be THAT bad... :D
07-13-2008, 04:34 PM
charles_h

Thanks for the comments Guys. :)

Quote:

Originally Posted by -Gab

That's right ;)

Well, I have two more questions.

I read the thread again but could not find anything about the precise kind of tape you used to attach the window. Have I missed anything, and if not, would you share this secret with us?

I have the same question concerning the stuff you used to remove the Silverstone logo, have you asked your friend if it was available as a consumer product?

For the window adhesive, there are lots of products that do the job nicely. 3M make a variety of thin, two sided tape that stick like sh|t to a blanket.

As for the logo removal; I forgot that I only responded to Evil by PM regarding that. I asked my dude and he didn't tell me if its avaiable as a consumer product, but he did tell me that the active component is HIGHLY hazardous to not only your health, but the health of your future offspring. Needless to say, I was horrified. The bottom line is that I'm actively looking for a solution that is a lot less toxic. Removing Silverstone logos isn't worth dying for - or producing children with gills. :eek: ;)

Quote:

Originally Posted by disruptfam

Charles i'm interested on what way you setup airflow direction in the bottom section of fc's rig.

The air comes in through the side with the PA120.3 (right side) assisted by two fans attached to the inside of the rad - pulling. An inch or so away is the PA120.2 which has two fans on the outside (left side) - pulling through the rad and out. What FC chooses to do with the warm air at this point is up to him. ;)

Quote:

Originally Posted by GrossmeisterB

Yeah, I allready phones the german Techflex-people, they were very helpful, and he said that normally this ain't a problem, but my order was cut allready and packaged, so no way to send it back...but I think if Charles used Flexo PET as well, it can't be THAT bad... :D

w3rd.

You'll be fine with the Flexo PET. :)
07-13-2008, 08:04 PM
Darkatom

Anyone know if Silverstone sells replacement parts for the tj07 ?
07-13-2008, 11:17 PM
GrossmeisterB

Quote:

Originally Posted by charles_h

w3rd.

You'll be fine with the Flexo PET. :)

Yeah, I really can't wait to get started!! Still waiting for a lot of parts though...but I think I will post a thread about my build here!!
:-D
07-14-2008, 02:18 AM
Steffen

Quote:

Originally Posted by Darkatom

Anyone know if Silverstone sells replacement parts for the tj07 ?

The german support sells every part if you need it.
So i think the american or anything else support should do it as well.
07-14-2008, 03:16 AM
dualbrain

Hey Steffen - you need to add some green details to your darth vader avatar :D

Charles' toxic green stuff: Good that we did not plan to produce kids ... good for them :)
07-14-2008, 11:30 AM
GrossmeisterB

I received my Techflex today, it looks real nice, can't wait to start building!!
But I'm still waiting for a lot of parts, and I gotta find some nice paint!! I don't wanna have it powdercoated, as I'll have to paint some plastic parts, too, and I'm afraid of not getting the same "color"...

Should I use my airbrush-pistol for painting?? I'm a bit unsure, haven't worked with that thing for ages... :shrug:
07-14-2008, 11:50 AM
lolhalol

amazing work man.. and craftsmanshipp..
07-14-2008, 04:17 PM
ut2k4_eVer

You have a French admirer :)
07-14-2008, 05:40 PM
dualbrain

Vive la France :)
07-15-2008, 03:43 PM
-Gab

Er... another question here! :p:

I was wondering whether the front USB header shown here:

http://www.tbreak.com/reviews/imageview.php?image=12499

... could be replaced by any 3/5" unit, like this one: http://www.caseking.de/shop/catalog/...ack::7110.html ?

Quote:

Originally Posted by dualbrain

Vive la France :)

Actually, there seems to be a few Murderbox admirers here in France... oh, and of MDPC too :toast:
07-15-2008, 04:36 PM
twwen2

1 Attachment(s)

Hey Charles if your still around i think you should look at this:

I was busy drooling at your wallpapers of this lovely build when i noticed something out of the ordinary.
The inlet and outlet of the Fusion are backwards. If i'm not mistaken, the loop order is res > pump > rad > CPU > GPU > GPU > res ?

If that's the case then your pumping liquid into the outlet of the CPU block, which shouldn't be encouraged. The other option is that the loop goes GPU > GPU > CPU > pump > rad > res > GPU ..., but i don't think you'd make the mistake of trying to pump through the res backwards!? :shrug:

If i'm missing something don't hesitate to ease my mind!

Here's a relevant pic:
07-15-2008, 07:40 PM
64dragon

Quote:

Originally Posted by -Gab

Er... another question here! :p:

I was wondering whether the front USB header shown here:

... could be replaced by any 3/5" unit, like this one: http://www.caseking.de/shop/catalog/...ack::7110.html ?

i dont see why not, there are a few sets of screw holes on the divider of the case that the stock header case mounts to

Show 100 post(s) from this thread on one page